Comfort audio DM80 Bedienungsanleitung

SecureStream

Technology

Comfort Digisystem User Manual

Microphone

DM80

English

Microphone DM80

User Manual

Table of Contents Page

Introduction to the Comfort Digisystem 3

Presenting the Microphone DM80 3

Functions of the Microphone DM80 4

Getting Started 5

First Time Use 6

Menu 7

More Functions 14

Radio Range and Channels 17

Attached Accessories 18

Other original Accessories 18

Troubleshooting 19

Service and Warranty 20

Technical Data 20

Important Safety Instructions 21

Microphone DM80

Introduction to the Comfort Digisystem

Thank you for choosing Comfort Digisystem.

The products are easy to use, whether you use a hearing aid or not.

Before using the product, please read this User Manual carefully.

Using the Microphone DM80 transmitter, the signal is transferred digitally,

resulting in excellent, clear sound.

Comfort Digisystem is fitted with SecureStream Technology - a type of digital

technology allowing eavesdrop-secure radio transfer in real time.

Presenting the Microphone DM80

A microphone that not only serves as a conference micro-phone, but can also

be connected to telephones. The DM80 can be connected via Bluetooth to a

mobile phone/portable phone, and the microphone can be connected via a

cable to a telephone using a 2.5 mm headset socket.

The DM80's built-in microphones are used to speak into, while incoming

sound from the telephone is transmitted in a wireless, interception-secure

link to any Digisystem receiver.

The DM80 has both an omnidirectional microphone and a directional micro-

phone for use in environments with more disruptive background noise. The

large, practical answering button can be used to answer calls with a Blue-

tooth connection, even if you have your phone in your pocket, for example.

Microphone DM80

Functions of the Microphone DM80

Function indicator

Pairing button

Multifunction socket

Menu control

On / Off

Charging socket Display

Microphone DM80

Answering button

Clip

Microphone

Answering button

Microphone DM80

Getting Started

Charging

The Microphone DM80 is chargeable. Charge the DM80 at least two hours

before you use it for the first time. An empty battery is fully charged within

two hours.

During charging, the function indicator shows red and a lightning bolt appears

through the battery symbol in the display. Once the battery symbol is filled

with green columns and the function indicator shows green, the unit is fully

charged and switches to automatic float charging.

You must not change the battery yourself; please contact your point of pur-

chase.

Please note:

Only use the charger

supplied by Comfort Audio AB.

Connecting a charger to the

Microphone DM80

First Time Use

The Microphone DM80is a microphone for closer range. It works best within

approx. 30 cm.

Switch on the transmitter by pressing the On/Off button for around two

seconds. Function indicator ON.

Connect the clip-on-microphone (or other original microphone) or headset

cable if desired.

The clip-on-microphone can be attached to your clothes with its clip.

The DM80 can be secured using the clip or hung around the neck using the

necklace provided (two lengths).

Microphone positions

Two settings are possible; omni-directional (press menu control down and

choose yes) and zoom (press menu control up and choose yes).

Zoom microphone mode is useful in environments with disruptive background

noise.

- Zoom

- Omni

Please note: Omni mode is automatically activated during charging. However,

when you make a call when zoom mode is preselected, this mode will be

activated.

Other functions are explained later in this manual.

WARNING!

The necklace should not be used if there is a risk of getting stuck,

e.g. in a machine or other objects.

Microphone DM80

Menu control

Three different selections can be made:

To access the menu, press the menu control:

Back

Communication

Channel

Pair

Bluetooth

Phone

Inputs

Extern mic

Line in

Phone

Mic gain

Line gain

Settings

PIN code

Charge

Language

Name

Func. indicator

Factory Reset

Key lock

About

Scroll up

Press/select

Scroll down

Microphone DM80

Back (relates to both the main menu and submenus)

Here you can choose to return to the menu and to the main display

Communication

Channel

To use the receiver and the transmitter together, they must be set to the same

channel. The transmitter and receiver are set to the default channel by the

manufacturer.

This does not apply to units with both sender and receiver. In this case the

transmitter/receiver are adjusted as described in chapter

Radio range and

Channels

Change channel:

1. Choose Channel in the menu.

2. Choose transmitter or receiver (this applies only to

units with both transmitter and receiver).

3. Select a new channel using the menu control.

Channel information is also given when the units are paired.

Channels 1, 2 and 3 are free channels in most European countries that do not

require a licence. Under Extended more channels can be selected, but these

usually require a licence – see the section

Radio Range and Channels

FFC (Free Frequency Check) indicates in green the suitable frequencies for

the specific environment. Please note! Switch off your other Digisystem trans-

mitters for correct result.

Pair

To use a receiver and transmitter together, they must be paired. All trans-mit-

ters and receivers are default paired at the factory and will work together.

NB! To prevent eavesdropping, a new code key must be generated and trans-

mitted between the units by pairing.

If the message Channel combination not possible appears during pairing,

this indicates that the selected frequency is outside the frequency range

within which the unit can transmit/receive. Check possible channels in the

Communication - Channel menu.

Microphone DM80

Transmitting/receiving of pairing information along with a new code can be

performed from any Comfort Digisystem unit with a display.

To pair units without a display, see sections

Pairing (via pairing button)

for

more information. Pairing information or a new code key can be received by

several activated units.

Pairing (via menu)

1. Choose Communication - Pair

2. Select Receive info on one unit. Ready to receive pairing info is shown in

the display.

3. Select New code on the other unit; select Yes.

4. Generate new code and send info? is shown in the display. Select Yes

(Now both the channel and the coding information have been sent, and

sound transfer is eavesdrop-secure).

5. To pair another unit into your coded system, select Send info instead on

one of your paired units.

Pairing (via pairing button)

(The only way of pairing units without a display, with the pairing button)

You can activate the Pairing function via the pairing button.

1. One brief press of the button opens the

Pairing

menu.

2. Two brief presses activate the Send info function.

3. One long press activates the Receive info function.

Cancel pairing function

When activating the pairing function, it is possible to cancel this function by

pressing the answering button. When you chose the BT pairing function and

you do not continue, the pairing function is canceled after 5 minutes.

Units with both transmitters and receivers built in

Comfort Digisystem units with both transmitters and receivers built-in can be

paired separately.

When opening the pairing menu, choose the concerning unit (transmitter/

receiver). In units with both transmitters and receivers, the pairing button

controls the transmitter.

The transmitter and receiver are paired separately in these units. The code

key is always the same for the transmitter and the receiver when these are

built-in in the same unit.

Microphone DM80

The easiest way to get the same code key in the whole Digisystem is to

generate a new code key from the combined unit; in that way the built-in

receiver gets the same code as the rest of the system.

Bluetooth

Here you can activate Bluetooth to be able to pair the Microphone DM80 with

a telephone or mobile.

For detailed user information, see chapter

More Functions - Bluetooth

Telephone

Under the Telephone menu you can configure the DM80 to function as a

telephone headset.

Connect the DM80 to the telephone's multifunction socket via the headset

cable supplied.

Please note: When the headset cable is connected to the DM80, the built-in

microphone is switched off and only works when a phone call is made.

To activate the telephone function, enter the menu under Communication -

Phone - Enable (Press shortly the menu control; a green tick shows that the

telephone function was activated and a small telephone shows in the down

left corner of the main display.

Use your telephone as usual; the voice of the person you are talking to is

transferred via the cable to the DM80; from there it is sent wirelessly to your

Digisystem receiver.

In level

adjusts the level of incoming sound level for telephony (not BT).

This level can also be adjusted using the menu control when the headset

cable is connected. The change of volume is shown on the display.

Out level

adjusts the level of outgoing sound level for telephony (not BT).

Mic mode

: here you can preset the desired microphone mode for telephony

(not BT) (default setting is zoom).

Inputs

Here you can select what the multifunction socket is to be used for.

External Mic

(for external microphone, e.g. clip-on microphone)

Line in

(for, e.g., a TV or computer cable)

Telephone

activates the socket on the DM80 for use as a headset. Same

function as

Activate

in the

Communication - Telephone

menu.

The level of the External mic or Line in can also be adjusted in this menu.

Andere Handbücher für DM80

Inhaltsverzeichnis

Andere Comfort audio Mikrofon Handbücher

Comfort audio

Comfort audio Comfort Digisystem DM10 Bedienungsanleitung

Comfort audio

Comfort audio Comfort Digisystem DC10 Bedienungsanleitung

Comfort audio

Comfort audio DM05 Bedienungsanleitung

Comfort audio

Comfort audio DC20 Bedienungsanleitung

Comfort audio

Comfort audio DC10 Bedienungsanleitung

Comfort audio

Comfort audio DC10 Bedienungsanleitung

Comfort audio

Comfort audio DM90 Bedienungsanleitung

Comfort audio

Comfort audio Comfort Digisystem DM10 Bedienungsanleitung

Comfort audio

Comfort audio DC20 Bedienungsanleitung

Comfort audio

Comfort audio DM20 Bedienungsanleitung

Comfort audio

Comfort audio DM05 Bedienungsanleitung

Comfort audio

Comfort audio Comfort Digisystem DM10 Bedienungsanleitung

Comfort audio

Comfort audio Microphone DM30 Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung