Comfort Zone 8259 Betriebsanleitung
Touchscreen thermostat programming guide (8259)
www.comfortzone.co
info@comfortzone.co
Watch the wiring guide
video on our website
1
5
4
3
2
6
7
°C
°C
°C
°C
Power button
Clock button/Backlight
Menu button
Down button
Up button
1 Toaccessadvancedsettingsswitchtheunitobytapping
the button.
2Then press and hold both the and button.
3Tap the button to switch to Sensor mode (2SEN) and
set to OUT
Before you start (Advanced settings)
8259hassomeadvancedsettingswhichmustbeconguredbefore
programming. These include Sensor Setup, Frost Protection &
Heating Schedule Options.
6 Tapthebuttontosetyour
programdays.
7Tap and to set the program
days.
8Program options include:
9 Switchotosaveyoursettingsusing
the button.
• Sevendayssame
• Fivedays&weekend
• Sixdayssame&1separateday
• Programo
Heating schedule options
Set the time and date
Yourheatingschedulecanbeconguredtosuitmostlifestyles.Theoptions
areMon–Fri(1-5)thesamewithSat–Sun(6-7)separate.Mon–Sat(1-6)
thesamewithSun(7)separateandAllDays(1-7)thesame.Youcanalso
switchotheheatingscheduleifyourequire.1-5dayssettingshave3
comfortperiods.6-7daysettingshas1comfortperiod.
Sensor mode
The8259hasthreesensorsettings.AirSensor(IN),FloorSensor(OUT)and
AirSensorwithFloorLimit(All).WerecommendFloorSensor(OUT)forthe
most accurate control.
AirSensor(IN) Floor Sensor (OUT) AirSensorwithFloor
Limit(All)
°C
°C
°C
°C
°C°C
°C°C
°C
1
5
4
3
2
6
7
°C
4 TapthebuttonuntilyouseeFrost
protectionmode(5LrP-pictured
left).
5Set this to “On” using the and
arrows.
°C
Frost protection
WhensettoON,thebuiltinfrostprotectionfeaturewillensurethe
temperatureofyoursubstrateneverdipsbelow10oc. This protects against
frozensubstratesandensureseconomicalheatuptimes.
Up
Manual control mode
Period1
Down
Program mode indicator
Power
Menu button
Period 4
Period 2
Period 5
Heating on
Period3
Period6
Clock Button
1Tap the button to switch unit on.
2 Thebacklightwillfadeafteraround10seconds.
3 Tapthebuttontoswitchitbackonatanypoint.
4 Pressandholdthebuttonforaround7secondsoruntil
theminutesbegintoash.
5Use the and arrows to select the correct minute.
6Tap the button to switch to hour and use and to
select the correct hour.
7 Tapthebuttonagaintoedittheday.
8 Usetheandarrowstoselectthecorrectdaynumber:
1=Mon7=Sun.
www.comfortzone.co
info@comfortzone.co
Watch the wiring guide
video on our website
Manual heating mode
Creating your heating schedule
1Tap button to switch the unit into Schedule mode.
2You will see both the and
(Period1-6)symbolsdisplayed.
3 Pressandholdfor7secondstoedityourschedule.
4 Firstly,setthestarttimefor(period1)usingtheup
and down buttons.
5 TaptosaveyourstarttimeandsettheComfortTemperature
tobetween200Cand270C.
6 Tap to advance to (period 2) and select the desired time
using and .
7 TaptosaveyourstarttimeandsettheEcoTemperature
between180Cand200C.
8 Taptoadvanceto(period3)andselectthedesiredtime
using and .
9 TaptosaveyourstarttimeandsettheComfortTemperature
tobetween200Cand270C.
10 Tap to advance to (period 4) and select the desired
time using and .
11 TaptosaveyourstarttimeandsettheEcoTemperature
between180Cand200C.
12 Tap to advance to (period 5) and select the desired time
using and .
13 TaptosaveyourstarttimeandsettheComfortTemperature
tobetween200Cand270C.
14 Taptoadvanceto(period6)andselectthedesiredtime
using and .
1 YoucanswitchbetweenManualmodeandyourcustomSchedule
bytapping.
2 Whenin(Manualcontrolmode),setatargettemperature
manuallyusingand.
3 Whenthetargettemperatureissetabovetheambient
temperature,youwillseethe(Heatingon)symbolbelowthe
targettemperature.Youmayalsoheara‘click’.
15 TaptosaveyourstarttimeandsettheEcoTemperature
between180Cand200C.
16 Nowyouhaveasetschedulefor5days.Taptosetyour
weekend heating.
17 Selectalaterstarttimeifyoulikealiein.Thistimewillapplyto
bothdays.
18 TaptosaveyourstarttimeandsettheComfortTemperature
between200Cand270C.
19 Taptosaveyourtemperatureandadvanceto
(Period 2).
20 Set the desired start time and set the Eco Temperature between
180Cand200C.
21 Youshouldnowhaveacomplete7dayheatingschedule!
22 Simplytap(Power)toactivateyourscheduleandyou’re
done.
Taptheiconatanytimetoswitchonthebacklight.Itwillturno
automaticallyafterasetperiodoftime.
Presstoswitchtheunitothenpressandholdand
together.PresstoscrolltoAFAC.Holduntil“---”is
displayed.Nowpressthenswitchotocompletethefactory
reset.
Press and hold the and to lock the screen, press and hold
againtounlock.Thisfeatureisusefulifthethermostatisinstalledinan
environment where access to the heating setting must be restricted.
ER0
Damaged or disconnected ambient temperature sensor (internal). This
errorusuallyrequiresareplacementthermostat.
ER1
Damagedordisconnectedoorsensorprobe(external).We
recommendthatyoucontactyourelectriciantoisolatetheelectricity
supplyandcheckthesensorisworkingandconnected.
Screen lock (Child lock)
Error codes
Backlight control
Factory reset
Touchscreen thermostat programming guide (8259)
Inhaltsverzeichnis
Andere Comfort Zone Thermostat Handbücher
Beliebte Thermostat Handbücher anderer Marken
EWELLY
EWELLY EW-181 Bedienungsanleitung
Prolon
Prolon T1100 Montageanleitung
Computherm
Computherm Q20 Bedienungsanleitung
Heatmiser
Heatmiser neoStat Bedienungsanleitung
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung
