Comm-Tec MTX44UH2 Bedienungsanleitung
MTX44UH2
4K HDBaseT 4x4 Matrix Switcher
All Rights Reserved
Version: 2019V1.0
4K HDBaseT 4x4 Matrix Switcher
Preface
Read this user manual carefully before using this product. Pictures shown in this
manual is for reference only, different model and specifications are subject to real
product.
This manual is only for operation instruction only, not for any maintenance usage.
The functions described in this version are updated till May 2016. Any changes of
functions and parameters since then will be informed separately. Please refer to the
dealers for the latest details.
All product function is valid till 2016-5-23.
Trademarks
Mentioned product model and logo are trademarks. Any other trademarks
mentioned in this manual are acknowledged as the properties of the trademark
owner. No part of this publication may be copied or reproduced without prior written
consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. It has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in
a commercial installation.
Operation of this equipment in a residential area is likely to cause interference, in
which case the user at their own expense will be required to take whatever
measures may be necessary to correct the interference
Any changes or modifications not expressly approved by the manufacture would
void the user’s authority to operate the equipment.
Manufacture
This product is manufactured by:
SHENZHEN PTN Electronics Limited
Add: B6, JinXiongDa Technology Park, HuanGuan Road South 105th
GuanLan Block, LongHua New District
ShenZhen City, 518110, China
Tel: +86-755-2846 1819 - Fax: +86-755-8471 7796
Service: [email protected]
Website: www.ptn-electronics.com
Comm-tec Srl 2 www.comm-tec.it
4K HDBaseT 4x4 Matrix Switcher
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before
using the device. Save this manual for further reference.
● Unpack the equipment carefully and save the original box and packing material
for possible future shipment
● Follow basic safety precautions to reduce the risk of fire, electrical shock and
injury to persons.
● Do not dismantle the housing or modify the module. It may result in electrical
shock or burn.
● Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
● Refer all servicing to qualified service personnel.
● To prevent fire or shock hazard, do not expose the unit to rain, moisture or
install this product near water.
● Do not put any heavy items on the extension cable in case of extrusion.
● Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
● Install the device in a place with fine ventilation to avoid damage caused by
overheat.
● Keep the module away from liquids.
● Spillage into the housing may result in fire, electrical shock, or equipment
damage. If an object or liquid falls or spills on to the housing, unplug the module
immediately.
● Do not twist or pull by force ends of the optical cable. It can cause malfunction.
● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power
to the device before cleaning.
● Unplug the power cord when left unused for a long period of time.
● Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
Comm-tec Srl 3 www.comm-tec.it
4K HDBaseT 4x4 Matrix Switcher
Contents
1. Introduction 6
1.1 Introduction to the 4K HDBaseT 4x4 Matrix Switcher 6
1.2 Features 6
1.3 Package List 7
2. Product Appearance of the 4K HDBaseT 4x4 Matrix Switcher 8
2.1 Front Panel 8
2.2 Rear Panel 9
3. System Connection 11
3.1 System Applications 11
3.2 Usage Precautions 11
3.3 Connection Diagram 11
3.4 Connection Procedure 12
3.5 Connection with HDMI Twisted Pair PoC Receiver 12
4. System Operations 14
4.1 Front Panel Button Control 14
4.1.1 Switching I/O connection 14
4.1.2 EDID Management 14
4.1.3 Inquiry 16
4.1.4 Clear operation 17
4.2 IR Control 17
4.2.1 Usage of IR Remote 17
4.2.2 Force Carrier 18
4.2.3 Control Far-end Device locally 18
4.2.4 Control Local Device Remotely 19
4.3 RS232 Control 20
4.3.1 Connection with RS232 Communication Port 20
4.3.2 Control through 9-pin RS232 port 21
4.3.3 Control through 3-pin RS232 port 21
4.3.4 Installation/uninstallation of RS232 Control Software 22
4.3.5 Basic Settings 22
4.3.6 RS232 Communication Commands 23
Comm-tec Srl 4 www.comm-tec.it
4K HDBaseT 4x4 Matrix Switcher
1. Introduction
1.1 Introduction to the 4K HDBaseT 4x4 Matrix Switcher
4K HDBaseT 4x4 Matrix Switcher is a professional 4x4 HDBaseT Matrix Switcher
that accommodates 4 HDMI IN (4k signal at max), 4 auxiliary audio IN, 4 IR IN.
Select HDMI input by front panel buttons, IR, RS232, or GUI. The selected source
is delivered to HDMI Output 1~2 (for HDMI input 1~2) & HDBaseT outputs 1~4
(easy extension to 70m at 1080p and 40m at 4Kx2K on a single CAT5e/6
connection with HDBaseT receivers, with PoC) simultaneously. The unit also
supports EDID management and HDCP.
Except embedded HDMI audio, 4K HDBaseT 4x4 Matrix Switcher provides 4
auxiliary audio outputs. Audio source is selectable via RS232 command. Selected
audio is output via HDMI outputs& HDBaseT outputs and the audio output sockets.
The unit also supports bi-directional RS232& IR control.
1.2 Features
● Support HDMI 1.4 &HDCP2.2, and compliant with lower standards, capable to
transmit 4Kx2K@60Hz & 1080p 3D
● Support manual HDCP management and auto-detecting
● Transmit 4Kx2K signal for 8m via HDMI port, 40m via HDBT port
● Audio source selectable via RS232 command
● 4 HDBaseT outputs, for easy extension to 70m at 1080p and 40m at 4Kx2K on
a single CAT5e/6 cable
● Support PoC
● LCD screen shows real-time I/O connection status, switching status, HDCP
status, and output resolution.
● Controllable via front panel, RS232, IR and TCP/IP
● Support bi-directional IR& RS232 control
● Built-in GUI for TCP/IP control
● Powerful EDID management
● Support off memory for reliable operation
● Support firmware upgrade through Micro USB port
● Easy installation with rack-mounting design
1.3
Comm-tec Srl 6 www.comm-tec.it
4K HDBaseT 4x4 Matrix Switcher
1.4 Package List
➢1 x 4K HDBaseT 4x4 Matrix Switcher
➢2 x Mounting ears (6 x Screws)
➢1 x RS232 cable
➢1 x IR Receiver
➢4 x Plastic cushions (4 x Black Screws)
➢1 x IR remote
➢1 x Power Adapter (DC 24V 2.71A)
➢8 x Pluggable Terminal Blocks
➢1 x User manual
Notes: Confirm if the product and the accessories are all included, if not, please
contact with the dealers.
Comm-tec Srl 7 www.comm-tec.it
4K HDBaseT 4x4 Matrix Switcher
2. Product Appearance of the 4K HDBaseT 4x4 Matrix
Switcher
2.1 Front Panel
No.
Name
Description
①
Firmware
Micro USB port for updating firmware
②
Power
Indicator
Illuminate red when power on.
③
IR
In-built IR sensor, receive IR signals sent from IR remote.
④
LCD Screen
Display real-time operation status.
⑤
INPUTS/
Menu
buttons
➢Normal mode: Back-lit buttons, ranging from "1" to "4".
➢Inquiry mode (buttons 1~4): Press “ENTER” for more than
3 seconds to enter this mode. Dial to select
different menus, to select different options.
⑥
OUTPUTS
buttons/
EDID
Manageme
nt buttons
➢Normal mode: Back-lit buttons, ranging from "1" to "4".
Output 1~2 support synchronous local HDMI output.
➢EDID Invoking mode: press and hold EDID button for 3
seconds or more to enter this mode, in this mode, button
1, 2 are used to switch to the previous/ next EDID data.
⑦
Function
buttons
ALL: Select all inputs/ outputs.
EDID management button: Enable input port to manually
capture and learn the EDID data of output devices.
CLEAR: Withdraw an operation like switching output
channel, learning EDID data before it comes into effect.
Meanwhile, the matrix will return to the previous status.
ENTER: Confirm operation. Press and hold it for 3 seconds
to enter in Inquiry mode.
Notes: Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
2.2 Rear Panel
Comm-tec Srl 8 www.comm-tec.it
4K HDBaseT 4x4 Matrix Switcher
No.
Name
Description
①
IR ALL IN
Input port for IR control signal, connect with IR receiver,
deliver IR signal to all the HDBaseT ports to control the remote
devices.
②
HDMI
INPUTS
HDMI input ports, 4 in total, type A female HDMI connector,
connect with HDMI input source devices.
③
IR OUT
Connect with IR transmitter, to emit the IR signal sent from the
HDBaseT ports of the far-end Receiver. These IR OUT
sockets make up an IR matrix with the IR IN sockets on the
HDBaseT receivers, and all IR signals can be switched
synchronously with the AV signal, or separately switched.
④
OUTPUTS
a. IR IN: Connect with IR receiver, fixed IR input for the
output, cannot be switched separately. It makes up an IR
bi-directional transmission with the IR OUT on the
corresponding HDBaseT receiver.
b. COAX: HDMI de-embedded digital audio output.
c. RS232: Serial port to communicate with the RS232 port on
corresponding HDBaseT receiver. When controlled by
HDBaseT receiver, the communication protocol must be
the same with 4K HDBaseT 4x4 Matrix Switcher.
d. HDMI: HDMI output port, connect with HDMI displayers,
deliver same input signals with HDBaseT ports, split HDMI
output for local monitoring.
e. HDBaseT: Works with HDBaseT receivers, such as HDMI
Twisted Pair PoC Receiver. It can extend AV, IR and
RS232 signal to 70m distance. Meanwhile, it can provide
power for the receivers which support PoC.
Comm-tec Srl 9 www.comm-tec.it
4K HDBaseT 4x4 Matrix Switcher
f. AUDIO: HDMI de-embedded stereo audio output
⑤
IR EYE
Connect with extended IR receiver, use the IR remote to
control 4K HDBaseT 4x4 Matrix Switcher.
⑥
TCP/IP
TCP/IP port for unit control
⑦
RS232
Serial port for unit control, 9-pin female connector, connects
with control device such as a PC.
⑧
Power
Indicator
Illuminate red when powered on.
⑨
DC 24V
Connect with DC 24V power adaptor.
⑩
GROUND
Connect to grounding, make the unit ground well.
Note: Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
Comm-tec Srl 10 www.comm-tec.it
Inhaltsverzeichnis
Andere Comm-Tec Matrix-Umschalter Handbücher
Comm-Tec
Comm-Tec MTX1616M-N Bedienungsanleitung
Comm-Tec
Comm-Tec MTX88M-N Bedienungsanleitung
Comm-Tec
Comm-Tec MTX44E Bedienungsanleitung
Comm-Tec
Comm-Tec MTX88M-N Bedienungsanleitung
Comm-Tec
Comm-Tec MTX88UH2 Bedienungsanleitung
Comm-Tec
Comm-Tec MTX0804RA Bedienungsanleitung
Comm-Tec
Comm-Tec MTX0404CA Bedienungsanleitung
Comm-Tec
Comm-Tec MTX0404VA Bedienungsanleitung
Comm-Tec
Comm-Tec MUH44UH Bedienungsanleitung
