Page 7
Remove oil drip tray
Make sure the oil tray slides into the center of the rear of
the base before use. Oil stains on the baking tray can ow
into the oil-receiving box through the oil receiving port.
When the machine is completely cooled down, the oil drip
tray can be removed and cleaned in the dishwasher.
Specic operation steps
1. Plug in the power supply and touch the “ ” button, grill will be in a standby state
and the indicator display shows “----”.
2. If the food is frozen, you need to put the food on the grill and close the upper
housing, then click the “ ” button to defrost.
3. Rotate function knob to select the desired function and press “ ”button to
preheat. If you choose pork, steak or fried sh, the progress bar will blink to remind
you to choose the maturity in the preheating process (Rare / Medium / Well-done)
by rotating the knob, select the progress bar corresponding to the maturity (Rare/
Medium/Well-done). Indicator light will blink “Preheat” while the grill is in the
preheating state. Once complete, the indicator display will stop blinking and show
“Preheat” to indicate that the process is nished.
4. Open the upper housing after preheating and put the food on the grate, then close
the upper housing and start cooking. Indicator light “Cooking”is on.
Note:
a. If the machine is on for a long time, the safety system will automatically shut
down the machine.
b. The machine can automatically identify the thickness of food and automatically
adjust the cooking time and temperature. The degree of cooking can be shown
by a display light.
c. To ensure proper operation, do not open the machine or raise the lid during
cooking/grilling.
d. Cylindrical food materials greater than 2” thick will need to be adjusted manually
during the process of closing the upper housing.
e. It is normal to have smoke when cooking.
5. When the food is cooked to your specication (Rare/Medium/Well-done), open
the upper housing and take out the food.
6. When the cooking is over, return to step 1. If you continue cooking, repeat step 2,
3, 4 and 5.
7. When the lid is opened, only DIY function is available to operate. Please do not
open the lid when it is preheating. It will turn to DIY function after 10 seconds when
the lid is opened.
SET UP & USE
