CommScope C1004W Bedienungsanleitung

solution

PON

C1004W - 10G EPON ONU

Installation and Professional’s Guide

Version 1.4

*This manual should be provided to professional installers educated and

trained with product installation method and product composition method.

solution

PON

C1004W Installation Guide

III

Table of Contents

Table of Contents...........................................................................................................III

Safety Precautions .........................................................................................................1

Product Introduction .......................................................................................................3

Features............................................................................................................................3

Appearance ......................................................................................................................4

Ports .................................................................................................................................5

LEDs.................................................................................................................................6

Contents of the Package...................................................................................................7

Installation.......................................................................................................................8

LED Indicator..................................................................................................................10

Web GUI configuration setting......................................................................................11

Default configuration setting ...........................................................................................11

Web Login.......................................................................................................................11

VLAN assignment...........................................................................................................12

Device Info....................................................................................................................15

Advanced Setup / WAN Service...................................................................................17

Advanced Setup / Interface Grouping ..........................................................................22

Wireless / Basic............................................................................................................24

Wireless / Security........................................................................................................25

Wireless / Advanced.....................................................................................................27

Troubleshooting............................................................................................................28

Specification .................................................................................................................30

solution

PON

C1004W Installation Guide

Safety Precautions

Warning

Before you install the C1004W unit, read this section. Product installation should be

conducted only by professional installer who has been accurately trained.

Electrical safety

Always use caution whenever handling live electrical material and

contacts.

Do not install electrical equipment in wet or damp conditions.

Ensure that the power source for the unit is adequately rated to assure

safe operation and provides current overload protection.

Do not allow anything to be put on the power cable, and do not place

this unit where people will stand or walk on the power cable.

This unit should be used with the approved power adaptor which is

included in the product package.

Warning

Do not open the enclosure without Commscope’s permission and technical support, which

voids the warranty.

Laser safety

Use of controls or adjustments, or performance of procedures other

than those specified herein may result in hazardous laser radiation

exposure.

To avoid exposure to radiation, do not stare into the aperture of a fiber-

optic port. Invisible radiation might be emitted from the aperture of the

port when no fiber cable is connected.

Do not bend the optic fiber cables severely, which may damage the

fiber or prevent the signal from being transmitted properly.

Always keep unused fiber-optic ports capped with a clean dust cap.

Warning

Invisible laser radiation may be emitted from disconnected fibers or connectors. Never stare

into beams or look directly to optical connectors.

Preventing EMI

When you run wires for any significant distance in an electromagnetic

field, electro magnetic interference (EMI) can occur between the field

and the signals on the wires.

Bad plant wiring can result in radio frequency interference (RFI).

If Strong EMI occurs in the installation place, consult RFI experts to get

rid of it.

solution

PON

Accessibility Safeguards

Warning Never use “Administrator” nor “Operator” login account except professional installer!

Warning

Supplier will not be liable for any damage or misoperation caused from incautious

configuration attempted by end user who tries with “Administrator” or “Operator” login

account.

Grade on accessibility

Three login accounts are available as per their own authority and

capability.

“Administrator” account gives the top most authority and “User”

account gives the least.

The account information is presented in this manual but this does not

mean any end user may dare to configure the unit.

This product must be installed and configured by professional installer

only.

Should there be any mis-configuration made upon the device (e.g. RF

band selection or country selection) by end user the device would not

operate properly.”

solution

PON

C1004W Installation Guide

Product Introduction

C1004W is a single family unit type ONU which has a 10G EPON uplink and 4 Gigabit Ethernet

ports for service as well as dual band WiFi interfaces. Each service port can support upto 1 Gbps

bandwidth meanwhile WiFi interface supports IEEE 802.11 b/g/n/ac. Besides, OAM functions like

remote detection/configuration via ACS, web configuration and QoS control features are also

obtainable for smoother operation and maintenance.

Features

Various speed combination supported

Diverse Downstream/Upstream speed sets for the uplink segment are available

- 10Gbps / 10Gbps

- 10Gbps / 1Gbps

- 2Gbps / 1Gbps (Turbo mode) - planned

- 1Gbps / 1Gbps - planned

Uplink segment means the portion between OLT and ONU.

[Note] 2Gbps / 1Gbps (Turbo mode) and 1Gbps / 1Gbps are only available provided that

appropriate optic module is equipped at the corresponding OLT port.

Compliant to cablelab’s DPoE specification

Right for the MSOs who want to migrate to EPON technology

Management via efficient OAM

Remote detection and configuration by way of TR-069 (planned)

EPON OAM

Authentication

Charging

Dualband wireless access in concurrent manner

IEEE 802.11 ac as well as b/g/n are supported.

- At 2.4 GHz: IEEE 802.11 b/g/n

- At 5 GHz: IEEE 802.11 ac

Local Configuration via web GUI

For monitoring and settings

solution

PON

Appearance

Figure 1 Front view of C1004W

Designed to be installed either wall mount or the desk placement.

Physical dimension & weight

- 288.50(W) x 186.6(D) x 150.00(H) mm

- 820g

Power adapter

- Input: 100 ~ 200VAC, 50 ~ 60 Hz

- Output: 12VDC, 3A

solution

PON

C1004W Installation Guide

Ports

Figure 2 Rear view of C1004W

Table 1 Descriptions of the ports on the rear panel of the C1004W

Port and Button Function

Four Gigabit Ethernet ports Four 10/100/1000Base-TX ports used for service connection

USB port

Updated system image is downloaded via this.

(To be operational in MP version)

WPS button Activate Wi-Fi Protected Setting

Reset button

Press for 1~3 seconds to reset the unit.

Press for more than 15 sec to get back to factory default setting.

10G EPON Uplink 10G EPON ports (SFP+ type) used for uplink connection

Power adapter jack Hole for the power inlet from PA.

solution

PON

LEDs

Figure 3Top view of C1004W

Table 2 Descriptions of the LEDs on the front panel of the C1004W

Silk Screen

Name

Status

Indication

PWR Power supply LED

Green On

Power is fed.

OFF

No power is fed.

PON Authentication LED

Green On

10G Link On

OFF

Link Off

LOS Loss of Signal

Purple On

Optic transceiver is NOT equipped.

Red On

PON Link is NOT established properly.

Or, continuous optic signal is detected.

OFF

PON Link is established properly. I.e. in

normal status.

DATA Data port LED Blue Blink

Packets are being transmitted between OLT

and ONU.

OFF

No packets are being transmitted between

OLT and ONU.

WLAN1 WLAN1 port LED

Blue On

5G Wi-Fi is in Active status.

Blue Blink

5G WPS is in operation.

OFF

5G Wi-Fi is in Inactive status

WLAN2 WLAN2 port LED

Blue On

2.4G Wi-Fi is in Active status.

Blue Blink

2.4G WPS is in operation.

OFF

2.4G Wi-Fi is in Inactive status.

WPS WPS port LED

Blue Blink

WPS is in operation

Off

WPS is NOT in operation

USB

USB port LED

Blue On

USB device is attached

solution

PON

C1004W Installation Guide

Contents of the Package

C1004W

Ethernet Cable

Installation

Guide

Transceiver module

Power Adapter

Star-shaped screws

Quick Install Guide

solution

PON

Installation

Warning

Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into

beams or view directly with optical instruments.

The sequence of installation is described from step 1 to 9 as below:

Step 1: Push gently down the hinged cover to connect the 10G SFP+ optic module.

Step 2: Slide the 10G SFP+ optic module into the socket on the ONU.

Step 3: Connect the SC/APC connector on one end of a single-mode optical fiber into the

optical terminal of the optical outlet (it could be a splitter or PIM card of an OLT) and

the other end into the PON port of C1004W by pushing it until a click sound is heard.

Step 4: Lift the hinged cover back into its position with care.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CommScope Netzwerk-Router Handbücher

CommScope

CommScope S1000C Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung