CommScope OneCell RP5000 Series Handbuch

DRAFT

Hardware Installation, RP5000 series

Release 4.0

Document Number: M0300A2

OneCell®

Document Revision: 4.0.11

Date: January 2020

ii M0300A2 4.0.11 January 2020

DRAFT

THIS DOCUMENT HAS BEEN DEVELOPED BY COMMSCOPE, AND IS INTENDED FOR THE USE OF ITS

CUSTOMERS AND CUSTOMER SUPPORT PERSONNEL.

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT

TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS

MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND,

EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY

PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET

FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED

HEREIN BY REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED

WARRANTY, CONTACT YOUR COMMSCOPE SALES REPRESENTATIVE FOR A COPY.

OneCell® Installation, RP5000 series, Release 4.0 iii

DRAFT

Contents

Document revision history

About this document

Audience....................................................................................................................xiii

Purpose.......................................................................................................................xiii

What you need to know .............................................................................................xiii

Customer documentation...........................................................................................xiii

Conventions ................................................................................................................xv

Notes, cautions, and warnings ...................................................................................xvi

PART 1 OVERVIEW AND PREPARATION

Chapter 1

CommScope OneCell® overview

Overview....................................................................................................................1-2

CommScope OneCell system ....................................................................................1-2

OneCell hardware components..................................................................................1-3

Baseband Controller physical ports.....................................................................1-3

Chapter 2

Preparing to install the OneCell system

Overview....................................................................................................................2-2

Before installing the OneCell components................................................................2-2

PART 2 ONECELL COMPONENT INSTALLATION

Chapter 3

Baseband Controller installation

Preparing for Baseband Controller installation..........................................................3-2

Installing the Baseband Controller into a rack...........................................................3-2

Chapter 4

RP5100i installation

RP5100i installation overview...................................................................................4-2

Ceiling mount.............................................................................................................4-3

Mounting the Radio Point on the ceiling tile ......................................................4-5

Contents

iv M0300A2 4.0.11 January 2020

DRAFT

Mounting the Radio Point above the ceiling tile...............................................4-15

Flown mount............................................................................................................4-22

Flown mount installation...................................................................................4-24

Pole mount...............................................................................................................4-31

Pole mount installation......................................................................................4-31

Chapter 5

RP5100r installation

Rugged Radio Point installation overview ................................................................5-2

Pole mount installation ..............................................................................................5-4

Vertical pole mount .............................................................................................5-4

Wall mount installation............................................................................................5-10

PART 3 APPENDICES

Appendix A

Safety

Radiation Exposure Statement..................................................................................A-2

FCC Part 15........................................................................................................A-2

EN55032.............................................................................................................A-2

Human exposure limits for OneCell deployments....................................................A-2

Reference documents .........................................................................................A-3

Appendix B

Installation troubleshooting

Baseband Controller LED patterns...........................................................................B-2

Radio Point LED patterns.........................................................................................B-4

Appendix C

Specifications

Electrical ratings and technical data .........................................................................C-2

SPF/SPF+ specifications...........................................................................................C-2

Appendix D

Field Replaceable Units

FRU overview...........................................................................................................D-2

Replacing Baseband Controller modules..................................................................D-2

Prerequisites .......................................................................................................D-2

Contents

OneCell® Installation, RP5000 series, Release 4.0 v

DRAFT

Off-site activities................................................................................................D-3

On-site activities.................................................................................................D-7

Post-Install Verification....................................................................................D-11

Replacing Radio Points...........................................................................................D-13

Prerequisites .....................................................................................................D-13

On-site activities...............................................................................................D-14

Replacing a ceiling RP5100i (above tile).........................................................D-17

Replacing a flown mounted RP5100i...............................................................D-31

Replacing a pole mounted Indoor RP...............................................................D-41

RP post-replacement verification.....................................................................D-46

Replacing RF modules............................................................................................D-49

Appendix E

Cable installation and power separation guidelines

Overview................................................................................................................... E-2

Cable handling.......................................................................................................... E-2

Cable termination...................................................................................................... E-3

Cable splicing..................................................................................................... E-4

Cable termination............................................................................................... E-5

Cable grounding............................................................................................... E-10

Lightning protection................................................................................................ E-12

Important guidelines......................................................................................... E-12

Indoor box ........................................................................................................ E-12

Outdoor protection ........................................................................................... E-13

Ceiling connector.................................................................................................... E-15

Patch panel.............................................................................................................. E-17

Power separation guidelines ................................................................................... E-17

OneCell® Installation, RP5000 series, Release 4.0 vi

DRAFT

List of figures

Figure 1-1 OneCell solution..............................................................................1-3

Figure 1-2 Baseband Controller ports ...............................................................1-4

Figure 4-1 CommScope ceiling mount kit contents..........................................4-3

Figure 4-2 Drop rail, system integrator-provided..............................................4-4

Figure 4-3 CommScope flown mount kit contents..........................................4-23

Figure 4-4 Mounting bracket kit contents.......................................................4-31

Figure 5-1 Hardware provided by CommScope................................................5-2

Figure 5-2 Hardware provided by the systems integrator.................................5-3

Figure 5-3 RJ45, IP67 connector assembly.......................................................5-4

Figure E-1 Unreel cable.................................................................................... E-2

Figure E-2 Cable with sock attached using tie wrap......................................... E-3

Figure E-3 RJ45, IP67 connector...................................................................... E-3

Figure E-4 Assembling the connector on the RP end....................................... E-4

Figure E-5 CAT6-A lightning protector......................................................... E-13

Figure E-6 Remote equipment protection for outdoor devices....................... E-14

Figure E-7 Protector box mounted to pole...................................................... E-15

OneCell® Installation, RP5000 series, Release 4.0 vii

DRAFT

List of tables

Table 1 Customer documentation ...................................................................xiv

Table 2 Conventions ........................................................................................xv

Table 1-1 Baseband Controller physical port assignments.................................1-4

Table A-1 RF exposure for OneCell at maximum power internal antennas ......A-3

Table E-1 CAT-6A protection equipment parts list......................................... E-13

List of tables

viii M0300A2 4.0.11 January 2020

DRAFT

OneCell® Installation, RP5000 series, Release 4.0 ix

DRAFT

Document revision history

The following section lists documentation changes in OneCell® Installation and

Commissioning (M0300A2) for R4.0, the release for RP5000 series devices.

Revision 4.0.11 (January 20, 2020)

• Added Ban12, 14 and 17 content to Table A-1 on page A-3

Revision 4.0.10 (October 22, 2019)

• Removed Commissioning section that included Configuration and Verification

chapters and changed title to OneCell Hardware Installation, RP5000 series

Revision 4.0.09 (October 11, 2019)

• Fixed layout in Chapter 4, RP5100i installation and Appendix D, Field

Replaceable Units

•Chapter 4, RP5100i installation

— Added content to drop rail requirements for Ceiling mount on page 4-3

— Replaced drawings showing updated plastic cover

•Appendix D, Field Replaceable Units

— Replaced drawings showing updated plastic cover

Revision 4.0.08 (October 7, 2019)

•Chapter 4, RP5100i installation

— Replaced drawings that had two Ethernet cable with drawings of one Ethernet

cable

•Chapter 5, RP5100r installation

— Replaced drawings that had two Ethernet cable with drawings of one Ethernet

cable

— Replaced Figure 5-1 on page 5-2

•Appendix A, Safety

Document revision history

xM0300A2 4.0.11 January 2020

DRAFT

— Added notes to Table A-1 on page A-3

•Appendix D, Field Replaceable Units

— Replaced drawings that had two Ethernet cable with drawings of one Ethernet

cable

Revision 4.0.07 (September 16, 2019)

• Chapter 6, Configuring the OneCell system

— Replaced Figure 6-1 on page 6-3 and Table 6-1 on page 6-4

Revision 4.0.06 (August 23, 2019)

• Chapter 6, Configuring the OneCell system

— Removed Cisco switch content

— Revised Configuring aggregate switches on page 6-5 with Ruckus switch

content

Revision 4.0.06 (August 19, 2019)

•Chapter 4, RP5100i installation

— Added SR/MR port information to chapter

•Chapter 5, RP5100r installation

— Added SR/MR port information to chapter

•Appendix A, Safety

— Updated Table A-1 on page A-3

Revision 4.0.05 (July 15, 2019)

• Removed Draft watermark

•AddedChapter 5, RP5100r installation

Revision 4.0.04 (June 6, 2019)

•Appendix D, Field Replaceable Units

— Added topic, Replacing RF modules on page D-49

Andere Handbücher für OneCell RP5000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CommScope Drahtloser Zugangspunkt Handbücher

CommScope

CommScope Era CAP M 9 Bedienungsanleitung

CommScope

CommScope RUCKUS T350se Bedienungsanleitung

CommScope

CommScope RUCKUS Unleashed H550 Bedienungsanleitung

CommScope

CommScope RUCKUS R760 Bedienungsanleitung

CommScope

CommScope RUCKUS R550 Bedienungsanleitung

CommScope

CommScope RUCKUS Unleashed T350SE Bedienungsanleitung

CommScope

CommScope RUCKUS T750 Bedienungsanleitung

CommScope

CommScope RUCKUS H550 Bedienungsanleitung

CommScope

CommScope RUCKUS H350 Bedienungsanleitung

CommScope

CommScope RUCKUS Unleashed T350c Bedienungsanleitung

CommScope

CommScope CAP MX Series Bedienungsanleitung

CommScope

CommScope RUCKUS Unleashed R350 Bedienungsanleitung

CommScope

CommScope RUCKUS R850 Bedienungsanleitung

CommScope

CommScope RUCKUS R550p Bedienungsanleitung

CommScope

CommScope Era Bedienungsanleitung

CommScope

CommScope RUCKUS Bedienungsanleitung

CommScope

CommScope RUCKUS R350 Bedienungsanleitung

CommScope

CommScope SYSTIMAX AirSPEED AP541 Bedienungsanleitung

CommScope

CommScope ERA CAP L2 18/21/ 23T/26 F-DC Bedienungsanleitung

CommScope

CommScope T750SE Bedienungsanleitung

CommScope

CommScope ERA CAP L2 18/21/ 23T/26 F-DC Bedienungsanleitung

CommScope

CommScope RUCKUS Unleashed R650 Bedienungsanleitung

CommScope

CommScope RUCKUS Unleashed R750 Bedienungsanleitung

CommScope

CommScope Era M0201AKB_uc Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung