Comnet CNGE8MS Bedienungsanleitung
INSTALLATION AND OPERATION MANUAL
CNGE8MS
8-PORT MANAGED GIGABIT SWITCH
v2.0 Sept 2012
The ComNet™CNGE8MS is an 8-port Managed Ethernet Switch designed to
reliably operate in harsh, environmentally challenging applications. It features
four (4) 1000BASE-TX and four (4) gigabit combo ports. The four combo ports are
10/100/1000Mbps configurable for either Cat5-e copper, or multimode or single-
mode optical fiber by the use of optional ComNet SFPs for connector type and
distance. Exclusive to ComNet is C-Ring, a feature that protects the network from
interruptions or temporary malfunctions with fast recovery technology. Legacy ring
allows the switch to be used in an existing ring of ComNet X-Ring enabled switches.
Redundant DC inputs are included for uninterrupted operation in the event of a power
supply failure. The electrical ports support the 10/100/1000Mbps Ethernet IEEE802.3
protocol, and auto-negotiating and auto-MDi/MDiX features are provided. These
network-managed layer 2 switches are optically and electrically compatible with any
IEEE802.3 compliant Ethernet device. The CNGE8MS is DIN-rail or wall-mountable.
Rev. 2.21.13
INS_CNGE8MS_REV–
09/17/12 PAGE 2
INSTALLATION AND OPERATION MANUAL CNGE8MS
Tech SupporT: 1.888.678.9427
Contents
Regulatory Compliance Statement 4
Warranty 4
Disclaimer 4
Safety Information 4
Overview 5
Introduction 5
Software Features 5
Hardware Features 6
Hardware Installation 7
Installing the Switch on DIN-Rail 7
Wall Mounting Installation 9
Hardware Overview 10
Front Panel 10
Front Panel LEDs 12
Top View Panel 13
Rear Panel 14
Cables 15
Ethernet Cables 15
SFP 18
Console Cable 18
WEB Management 20
Command Line Interface Management 71
About CLI Management 71
Commands Set List—System Commands Set 76
Commands Set List—Port Commands Set 78
Commands Set List—Trunk command set 80
Commands Set List—VLAN command set 81
Commands Set List—Spanning Tree Command Set 82
Commands Set List—QoS command set 83
INS_CNGE8MS_REV–
09/17/12 PAGE 3
INSTALLATION AND OPERATION MANUAL CNGE8MS
Tech SupporT: 1.888.678.9427
Commands Set List—IGMP command set 84
Commands Set List—MAC/Filter Table command set 85
Commands Set List—SNMP command set 86
Commands Set List—Port Mirroring command set 87
Commands Set List—802.1x command set 87
Commands Set List—TFTP command set 88
Commands Set List—SYSLOG, SMTP, EVENT command set 89
Commands Set List—SNTP command set 91
Commands Set List— Ring command set 92
Technical Specifications 93
INS_CNGE8MS_REV–
09/17/12 PAGE 4
INSTALLATION AND OPERATION MANUAL CNGE8MS
Tech SupporT: 1.888.678.9427
Regulatory Compliance Statement
Product(s) associated with this publication complies/comply with all applicable regulations. Please
refer to the Technical Specifications section for more details.
Warranty
ComNet warrants that all ComNet products are free from defects in material and workmanship
for a specified warranty period from the invoice date for the life of the installation. ComNet will
repair or replace products found by ComNet to be defective within this warranty period, with
shipment expenses apportioned by ComNet and the distributor. This warranty does not cover
product modifications or repairs done by persons other than ComNet-approved personnel, and
this warranty does not apply to ComNet products that are misused, abused, improperly installed,
or damaged by accidents.
Please refer to the Technical Specifications section for the actual warranty period(s) of the
product(s) associated with this publication.
Disclaimer
Information in this publication is intended to be accurate. ComNet shall not be responsible for its
use or infringements on third-parties as a result of its use. There may occasionally be unintentional
errors on this publication. ComNet reserves the right to revise the contents of this publication
without notice.
Safety Information
»Only ComNet service personnel can service the equipment. Please contact ComNet Technical
Support.
»The equipment should be installed in locations with controlled access, or other means of
security, and controlled by persons of authority.
INS_CNGE8MS_REV–
09/17/12 PAGE 5
INSTALLATION AND OPERATION MANUAL CNGE8MS
Tech SupporT: 1.888.678.9427
Overview
Introduction
The CNGE8MS is a powerful managed industrial Ethernet switch containing many unique features.
These switches can work under a wide temperature range, dirty environmental and humidity
conditions.
WEB-based, TELNET, Console port or other third-party SNMP software can manage the
CNGE8MS as well. The switch can be managed by a useful utility called eConsole, a powerful
network management software. With its user-friendly and powerful interface, multiple switches
can be easily configured at the same time, and switches’ statuses monitored.
Software Features
»Redundant Ethernet Ring: C-Ring (Recovery time <30ms over 250 units connection)
»Supports Ring Coupling, Dual Homing over C-Ring technology
»Supports SNMPv1/v2c/v3 & RMON & Port base/802.1Q VLAN Network Management
»Event notification by Email, SNMP trap and Relay Output
»Web-based, Telnet, Console, CLI configuration
»Enable/disable ports, MAC based port security
»Port based network access control (802.1x)
»VLAN (802.1q) to segregate and secure network traffic
»Radius centralized password management
»SNMPv3 encrypted authentication and access security
»RSTP (802.1w)
»Quality of Service (802.1p) for real-time traffic
»VLAN (802.1q) with double tagging and GVRP supported
»IGMP Snooping for multicast filtering
»Port configuration, status, statistics, mirroring, security
»Remote Monitoring (RMON)
INS_CNGE8MS_REV–
09/17/12 PAGE 6
INSTALLATION AND OPERATION MANUAL CNGE8MS
Tech SupporT: 1.888.678.9427
Hardware Features
»Two Redundant DC power inputs
»Operating Temperature: -40˚ C to +75˚ C (-40˚ to +167˚ F) Functional to +85˚ C (185º F)
»Storage Temp: -40˚ C to +85˚ C (-40˚ to 185°F)
»Storage Temperature: -40º to 85ºC
»Operating Humidity: 5% to 95%, non-condensing
»Casing: Aluminum
»4 × 10/100/1000BASE-T(X) Gigabit Ethernet port
»4 × 100/1000BASE-X SFP & 10/100/1000BASE-T(X) Combo port
»Console Port
»Dimensions (W × D ×H): 2.93 × 4.3 × 6.05 in (7.43 × 10.92 × 15.36 cm)
INS_CNGE8MS_REV–
09/17/12 PAGE 7
INSTALLATION AND OPERATION MANUAL CNGE8MS
Tech SupporT: 1.888.678.9427
Hardware Installation
Installing the Switch on DIN-Rail
Each switch has a DIN-Rail kit on the rear panel. The DIN-Rail kit affixes the switch to the DIN-Rail.
It is easy to install the switch on the Din-Rail:
Metal Spring
INS_CNGE8MS_REV–
09/17/12 PAGE 8
INSTALLATION AND OPERATION MANUAL CNGE8MS
Tech SupporT: 1.888.678.9427
Mount Series on DIN-Rail
Step 1: Tilt the switch and mount the metal spring to DIN-Rail.
Step 2: Push the switch toward the DIN-Rail until you hear the spring snap into place
.
INS_CNGE8MS_REV–
09/17/12 PAGE 9
INSTALLATION AND OPERATION MANUAL CNGE8MS
Tech SupporT: 1.888.678.9427
Wall Mounting Installation
Each switch has another installation method for users to fix the switch. A wall mount panel can be
found in the package. The following steps show how to mount the switch on the wall:
Mounting the CNGE8MS on a Wall
Step 1: Remove Din-Rail kit.
Step 2: Use the included screws to attach the wall mount panel as shown in the diagram below.
The screw specifications are shown in the following two pictures. In order to prevent switches from
being damaged, the screws should not be larger than the size that used in CNGE8MS switch.
INS_CNGE8MS_REV–
09/17/12 PAGE 10
INSTALLATION AND OPERATION MANUAL CNGE8MS
Tech SupporT: 1.888.678.9427
Hardware Overview
Front Panel
The following table describes the labels that are attached to the CNGE8MS.
Port Description
10/100/1000
BASE-T(X) RJ-45
fast Ethernet
ports
4 × 10/100/1000BASE-T(X) RJ-45 fast Ethernet ports supporting auto-
negotiation.
Default Settings:
Speed: auto
Duplex: auto
Flow control: disable
Gigabit Combo
Ports
10/100/1000BASE-T(X) RJ-45 + 100/1000BASE-X SFP Ports
Console Use supplied RS-232 to RJ-45 cable to connect to the switch.
Inhaltsverzeichnis
Andere Comnet Schalten Handbücher
Comnet
Comnet CWGE10FX2TX8MSPOE Bedienungsanleitung
Comnet
Comnet CNFE4+1SMS2POE Bedienungsanleitung
Comnet
Comnet CNGE11FX3TX8MS Bedienungsanleitung
Comnet
Comnet CNGE4TX4US/M Bedienungsanleitung
Comnet
Comnet CNGE28FX4TX24MS Series Bedienungsanleitung
Comnet
Comnet CLFE4+2SMS Series Bedienungsanleitung
Comnet
Comnet CNGE4US Bedienungsanleitung
Comnet
Comnet RELIANCE RLGE2FE16R Bedienungsanleitung
Comnet
Comnet CNGE28FX4TX24MSPOE+ Bedienungsanleitung
Comnet
Comnet CWGE26FX2TX24MSPOE Bedienungsanleitung
Comnet
Comnet CNFE4SMSPOE Bedienungsanleitung
Comnet
Comnet CNFE5SMS Bedienungsanleitung
Comnet
Comnet CNGE2FE24MSPOE Bedienungsanleitung
Comnet
Comnet CWGE28FX4TX24MS Bedienungsanleitung
Comnet
Comnet CNGE2+2SMS Bedienungsanleitung
Comnet
Comnet CNGE2+2SMS Bedienungsanleitung
Comnet
Comnet CWGE24MODMS Bedienungsanleitung
Comnet
Comnet CNXE2GE2TX8MSPOE Bedienungsanleitung
Comnet
Comnet CLFE IPS Series Bedienungsanleitung
Comnet
Comnet CNGE2FE8MSPOE2 Bedienungsanleitung
