Comnet CWGE28FX4TX24MS Bedienungsanleitung

INSTALLATION AND OPERATION MANUAL

CWGE28FX4TX24MS

(24) 10/100/1000 BASE-TX + (4) 1000BASE-FX

MANAGED ETHERNET SWITCH

The ComNet™CWGE28FX4TX24MS Layer 2 Managed 28 Port Ethernet Switch supports

twenty-four(24) 10/100/1000BASE-TX portsandfour(4)1000BASE-FXports ofEthernet

data. The four 1000BASE-FX ports are SFP configurable for fiber type (multimode or

single-mode), connector type and distance. The exclusive C-Ring redundant ring

feature protects networks from interruptions or temporary malfunctions with its fast

recovery technology. The electrical ports support the 10/100/1000 Mbps Ethernet IEEE

802.3 protocol, and auto-negotiating and auto-MDI/MDIX features are included. The

CWGE28FX4TX24MS are optically (1000BASE-FX) and electrically compatible with any

IEEE 802.3 compliant Ethernet device.

INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 2

INSTALLATION AND OPERATION MANUAL CWGE28FX4TX24MS

TECH SUPPORT: 1.888.678.9427

Contents

About This Guide 3

Related Documentation

The following documentation is also available:

»CWGE28FX4TX24MS Datasheet

About ComNet

ComNet develops and markets the next generation of video solutions for the CCTV, defense, and

homeland security markets. At the core of ComNet’s solutions are a variety of high-end video

servers and the ComNet IVS software, which provide the industry with a standard platform for

analytics and security management systems enabling leading performance, compact and cost

effective solutions.

ComNet’s products are available in commercial and rugged form.

Website

For information on ComNet’s entire product line, please visit the ComNet website at

http://www.comnet.net

Support

For any questions or technical assistance, please contact your sales person (sales@comnet.net) or

the customer service support center (techsupport@comnet.net)

Safety

»Only ComNet service personnel can service the equipment. Please contact ComNet Technical

Support.

»The equipment should be installed in locations with controlled access, or other means of

security, and controlled by persons of authority.

INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 4

INSTALLATION AND OPERATION MANUAL CWGE28FX4TX24MS

TECH SUPPORT: 1.888.678.9427

Overview

Introduction

The ComNet CWGE28FX4TX24MS is a managed redundant ring Ethernet switch with

24x10/100/1000Base-(TX) ports and 4x1000Base-X SFP ports. The Ethernet Redundancy protocol,

C-Ring (Gigabit model recovery time < 30ms over 250 units of connection) and MSTP/RSTP/

STP (IEEE 802.1s/w/D) can protect your applications from network interruptions or temporary

malfunctions with its fast recovery technology.

ComNet’s Ethernet switches provide advanced IP-based bandwidth management which can limit

the maximum bandwidth for each IP device. The User can configure IP cameras and Network

Video Recorders with more bandwidth and limit other device’s bandwidth.

ComNet’s Ethernet switches also support application-based QoS. Application-based QoS can set

the highest priority for data stream according to TCP/UDP port number. The ComNet special IP

police function can permit only allowed IP address with MAC address to access the networking.

Unintended access is eliminated, as a user cannot access the IP surveillance network without

permission. Moreover, the ComNet CWGE28FX4TX24MS switch provides advanced DoS/DDoS

auto prevention. If an IP flow rises quickly, the CWGE28FX4TX24MS switch will lock the source IP

address for a certain time to prevent the attack. It is hardware-based prevention so it can prevent

DDOS attack immediately and completely. And all functions of the CWGE28FX4TX24MS can also

be centrally managed conveniently by eConsole, the Web-based interface, Telnet and console

(CLI) configuration. Therefore, the switch is one of the most reliable choices for highly managed

and Gigabit Fiber Optic Ethernet applications.

INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 5

INSTALLATION AND OPERATION MANUAL CWGE28FX4TX24MS

TECH SUPPORT: 1.888.678.9427

Software Features

»Industry’s fastest Redundant Ethernet Ring (Gigabit model recovery time < 30ms over 250 units

connection)

»Support for Ring Coupling, Dual Homing over Ring and standard STP/RSTP

»Support for SNMPv1/v2c/v3 & RMON & Port base/802.1Q VLAN Network Management

»Event notification by Email and SNMP trap

»Windows Utility eConsole, Web-based ,Telnet and Console(CLI) configuration

»Enable/disable ports, MAC based port security

»Port based network access control (802.1x)

»VLAN (802.1q ) to segregate and secure network traffic

»RADIUS centralized password management

»SNMPv3 encrypted authentication and access security

»Quality of Service (802.1p) for real-time traffic

»VLAN (802.1q) with double tagging and GVRP supported

»IGMP Snooping for multicast filtering

»Port configuration, status, statistics, mirror, security

»Remote Monitoring (RMON)

INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 6

INSTALLATION AND OPERATION MANUAL CWGE28FX4TX24MS

TECH SUPPORT: 1.888.678.9427

Hardware Features

»One 100~240VAC power input

»Operating Temperature: -10˚ to +60˚ C (+14˚ to +140˚ F)

»Storage Temperature: -40 to 85ºC (-40 to 185ºF)

»Operating Humidity: 5% to 95%, non-condensing

»Casing: IP-20

»24 x 10/100/1000Base –T(X) RJ-45 ports

»4 x 1000 Base-X SFP ports

»Console Port (DB9 Female connector)

»Dimensions (W × D × H): 17.50 × 7.88 × 1.75 inch (44.45 × 20.00 × 4.45 cm)

INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 7

INSTALLATION AND OPERATION MANUAL CWGE28FX4TX24MS

TECH SUPPORT: 1.888.678.9427

Hardware Installation

547 3

CWGE28FX4TX24MS Front Panel

The following table describes the labels that are on the CWGE28FX4TX24MS switch

Port Description

Gigabit SFP ports 4 × 1000Base-X on SFP port

Gigabit Ethernet Port 24 × 10/100/1000Base–T(X)

Console Use RS-232 with DB9 connecter to manage switch.

1. Console port (DB9 Female connector)

2. 10/100/1000Base-T(X) gigabits Ethernet port

3. 1000Base-X Fiber port on SFP port

4. LED for Ethernet ports Link/Act status: Left Green for 1000Mbps indicator, Amber for

10/100Mbps indicator

5. LED for Ethernet ports Duplex status.

6. LED for SFP ports Link/Act status.

7. Front panel Indicating LEDs:

› STA: Solid Green indicates that the system is ready. The LED is blinking when the system is

upgrading firmware

› PWR: The LED lights on when the power module is activated.

› R.M.: (Ring Master). When the LED light is on, the switch is the ring master of Ring.

› Ring: When the LED light is on, it means the C-Ring is activated.

› DEF: System resets to default configuration.

› Ping: System is processing “PING” request.

› RUN: System is operating continuously.

› RMT: System is accessed remotely.

INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 8

INSTALLATION AND OPERATION MANUAL CWGE28FX4TX24MS

TECH SUPPORT: 1.888.678.9427

Rear Panel

CWGE28FX4TX24MS Rear Panel

1. Power Switch

2. Power input for AC 100V~240V / 50~60Hz

Rack mount kit assembly

You can find the rack mount kit and the screws in the packing box. Please assembly the rack

mount kit on the switch with screws as shown below:

INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 9

INSTALLATION AND OPERATION MANUAL CWGE28FX4TX24MS

TECH SUPPORT: 1.888.678.9427

Front Panel LEDs

LED Color Status Description

PWR Green On DC power module activated.

STA Green On Power module is in PWR UP state

Blinking The system is upgrading firmware

DEF Green On System resets to default configuration.

RUN Green Slowly blinking System is operating continuously.

Ping Green Blinking System is processing “PING” request

RMT Green Blinking System is being accessed remotely.

Ring Green

On Ring enabled.

Slowly blinking Ring has only One link. (lacks one link to build the ring)

Fast blinking Ring work normally.

R.M Green On When the system is operating in C-Ring Master mode

Fault Amber On Indicates unexpected event occurred.

10/100/1000Base-T(X) Gigabit Ethernet ports

LINK/ACT

(Left)

Green On Port speed 1000M link up

Blinking Data Transmitted on 1000M

Amber On Port speed 10/100M link up

Blinking Data Transmitted on 10/100M

Full-

Duplex

(Right)

Amber

On Full-Duplex

Blinking Half-Duplex

SFP

LINK/ACT Green On Port link up.

Blinking Data transmitted

INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 10

INSTALLATION AND OPERATION MANUAL CWGE28FX4TX24MS

TECH SUPPORT: 1.888.678.9427

Cables

Ethernet Cables

The CWGE28FX4TX24MS series switches have standard Ethernet ports. According to the link

type, the switches use CAT 3, 4, 5,5e UTP cables to connect to any other network device (PCs,

servers, switches, routers, or hubs). Please refer to the following table for cable specifications.

Cable Types and Specifications

Cable Type Max. Length Connector

10BASE-T Cat. 3, 4, 5 100-ohm UTP 100 m (328 ft) RJ-45

100BASE-TX Cat. 5 100-ohm UTP UTP 100 m (328 ft) RJ-45

1000BASE-TX Cat. 5/Cat. 5e 100-ohm UTP UTP 100 m (328ft) RJ-45

100BASE-TX/10BASE-T Pin Assignement

With 100BASE-TX/10BASE-T cable, pins 1 and 2 are used for transmitting data, and pins 3 and 6

are used for receiving data.

10/100 Base-T RJ-45 Pin Assignments

Pin Number Assignment

1TD+

2TD-

3RD+

4Not used

5Not used

6RD-

7Not used

8Not used

Note: “+” and “-” signs represent the polarity of the wires that make up each wire pair.

Inhaltsverzeichnis

Andere Comnet Schalten Handbücher

Comnet

Comnet CWGE24MS Bedienungsanleitung

Comnet

Comnet CNFE5SMS Bedienungsanleitung

Comnet

Comnet CNFE4+1SMS2POE Bedienungsanleitung

Comnet

Comnet CWGE24MODMS Bedienungsanleitung

Comnet

Comnet CNGE2FE16MS Bedienungsanleitung

Comnet

Comnet CNGE3FE8MSPOEHO Bedienungsanleitung

Comnet

Comnet CWGE10FX2TX8MSPOE Bedienungsanleitung

Comnet

Comnet CNGE8MS Bedienungsanleitung

Comnet

Comnet CNGE2FE24MSPOE Bedienungsanleitung

Comnet

Comnet CNGE2+2SMS Bedienungsanleitung

Comnet

Comnet CNGE28FX4TX24MS Series Bedienungsanleitung

Comnet

Comnet RELIANCE RLGE2FE16R Bedienungsanleitung

Comnet

Comnet CNXE2GE2TX8MSPOE Bedienungsanleitung

Comnet

Comnet CNGE2+2SMS Bedienungsanleitung

Comnet

Comnet CNXE2GE2TX8MSPOE Bedienungsanleitung

Comnet

Comnet CWGE26FX2TX24MSPOE Bedienungsanleitung

Comnet

Comnet CNGE4US Bedienungsanleitung

Comnet

Comnet CNFE4SMSPOE Bedienungsanleitung

Comnet

Comnet CLFE IPS Series Bedienungsanleitung

Comnet

Comnet CNGE4TX4US/M Bedienungsanleitung

Comnet

Comnet CNGE28FX4TX24MSPOE+ Bedienungsanleitung

Comnet

Comnet CLFE4+2SMS Series Bedienungsanleitung

Comnet

Comnet CNGE2FE8MSPOE2 Bedienungsanleitung

Comnet

Comnet CNGE11FX3TX8MS Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung