Comnet Netwave ComNet Series Bedienungsanleitung

INSTALLATION AND OPERATION MANUAL

INDUSTRIALLY HARDENED HIGH PERFORMANCE

WIRELESS ETHERNET

Thank you for purchasing NetWave® from ComNet. This installation guide applies to

all Generation 3 5GHz NetWave Radios.

The NetWave industrially hardened wireless Ethernet transmission link from ComNet

can be configured through the embedded User Interface as a Client or as an Access

Point. This point-to-multipoint model allows multiple Ethernet endpoints to be

connected to a central Access Point. NetWave Radios support up to 500 Mbps with

their fastest radio using MIMO Technology. An easy to read LED array displays unit

operational status along with received signal strength ensuring optimal installation

and operation. The NW1, NW2 and NW9 family of radios all support 802.3af/at PoE

while the NWK11/M Kit only acceapts Passive PoE. FCC radios are certified for the

United States. IC radios are certified for Canada. ETSI, DFS, and TPC Certified for the

rest of the world.

This manual serves the following

ComNet Series:

NW1[IC]

NW1DR[IC]

NW2

NW9[IC,E]

NWK1[IC]

NWK2

NWK9[IC,E]

NWK11/ M[IC]

INS_NetWave_REV– 06/10/13 PAGE 2

INSTALLATION AND OPERATION MANUAL NETWAvE

TECH SUPPORT: 1.888.678.9427

About This Guide

This guide is intended for different users such as engineers, integrators, developers, IT managers,

and technicians.

It assumes that users have some PC competence and are familiar with Microsoft Windows

operating systems and web browsers such as Windows Internet Explorer and Mozilla Firefox, as

well as have knowledge of the following:

»Installation of electronic equipment

»Electrical regulations and guidelines

»Knowledge of Local Area Network technology

Related Documentation 2

Website 2

Safety 2

Overview 5

Legal Information 5

1.0 Introduction 6

1.1 System Requirements 6

2.0 Point to Multi-Point 7

3.0 Point-to-Point Topology Utilizing Dual Ports 7

4.0 Cabling Requirements 8

5.0 Hardware Installation 8

5.1 Outdoor Ethernet Gland Installation 8

5.2 NetWave Indicating LED Details 10

5.3 Outdoor Standard Mounting Hardware 10

6.0 Key Default Configurations 11

7.0 Quick Configuration 12

8.0 Detailed Configuration 13

8.1 Getting Started 13

8.2 Operating Modes 14

8.3 Buttons and Alerts 14

9.0 Status Tab 16

9.1 Overview 16

9.2 Wireless 17

9.3 Wireless (for AP Mode) 17

9.4 Wireless (for Client Mode) 18

9.5 Associated Stations (for AP Mode) 19

9.6 System 19

9.7 Memory 19

9.8 Network 20

9.9 DHCP Leases 20

9.10 Link Status (for Client Mode) 20

INS_NetWave_REV– 06/10/13 PAGE 4

INSTALLATION AND OPERATION MANUAL NETWAvE

TECH SUPPORT: 1.888.678.9427

9.11 Routes 21

9.12 Kernel Log 22

9.13 Real-time Graphs 23

10.0 System Tab 26

10.1 System Properties 26

10.2 Time Synchronization 27

10.3 Administration 28

10.4 Services 30

10.5 SNMP 31

10.6 Reset Button 32

10.7 Indicating LEDs 33

10.8 Backup/Flash Firmware 34

10.9 Reboot 34

11.0 Network Tab 35

11.1 Interfaces – WAN 36

11.2 Interfaces – LAN 39

11.3 WiFi – Overview 42

11.4 WiFi – Wireless Network 46

11.5 Hostnames 56

11.6 Static Routes 56

11.7 Firewall 57

11.8 Diagnostics 59

11.9 Quality of Service 60

12.0 AP Controller Tab 61

12.1 Getting Started with Managing APs using the APc 61

12.2 L2TPv3 Settings 61

12.3 IPSec 62

12.4 APc SNMP Settings 62

12.5 AP SNMP Settings 62

13.0 Troubleshooting 63

13.1 Troubleshooting steps 63

13.2 Resetting to factory default 63

14.0 Glossary 64

15.0 Agency Compliance 67

16.0 GPL (General Public License) Statement 69

INS_NetWave_REV– 06/10/13 PAGE 5

INSTALLATION AND OPERATION MANUAL NETWAvE

TECH SUPPORT: 1.888.678.9427

Overview

Legal Information

No part of this document may be reproduced or transmitted in any form or by any means,

electronic and mechanical, for any purpose, without the express written permission of ComNet.

Disclaimer

ComNet reserves the right to make changes in specifications at any time without notice. The

information furnished by ComNet in this material is believed to be accurate and reliable. However,

ComNet assumes no responsibility for its use.

INS_NetWave_REV– 06/10/13 PAGE 6

INSTALLATION AND OPERATION MANUAL NETWAvE

TECH SUPPORT: 1.888.678.9427

1.0 Introduction

The NetWave industrially hardened wireless Ethernet transmission link from ComNet can be

configured through the embedded User Interface as a Client or as an Access Point. This point-to-

multipoint model allows multiple Ethernet endpoints to be connected to a central Access Point.

NetWave Radios support up to 500Mbps with their fastest radio using MIMO Technology. An easy

to read LED array displays unit operational status along with received signal strength ensuring

optimal installation and operation. The NW1, NW2, and NW9 family of radios support 802.3af PoE

while the NWK11/M only accepts Passive PoE. The NW1, NW2 and NW9 family of radios support

802.3af/at PoE while the NWK11/M Kit only accepts Passive PoE.

This user manual is a guide for the NetWave Wireless Radios as well as the preconfigured kits.

ComNet NetWave Wireless offers OpenWRT with the most advanced Qualcomm Atheros wireless

drivers. NetWave now includes a new user-friendly LuCI web interface for configuring the device.

OpenWRT is an extensible GNU/Linux distribution for embedded devices. It is built from the

ground up to be a full-featured, easily modifiable operating system. It is powered by a Linux

kernel that's more recent than most other distributions. LuCI is a free, clean, extensible and easily

maintainable web user interface for embedded devices. It has high performance, small installation

size, fast runtimes, and good maintainability. The units come configured for either point to point

or point to multipoint applications.

This manual contains detailed operational and configuration information not covered in the quick

start guides. There some variations in features with each model, please consult the appropriate

data sheet for features and capabilities.

This guide applies toall NetWave Radios.

1.1 System Requirements

Operating System:

Microsoft Windows XP, Windows Vista, Windows 7, Windows 8, Linux, or Mac OS X.

Web Browser:

Mozilla Firefox, Google Chrome, Apple Safari, or Microsoft Internet Explorer 8 or above.

INS_NetWave_REV– 06/10/13 PAGE 7

INSTALLATION AND OPERATION MANUAL NETWAvE

TECH SUPPORT: 1.888.678.9427

2.0 Point to Multi-Point

These individual units allow the user to configure for either multipoint access point or client operation.

There is a MAC address lock feature that can be enabled through the user interface but is not enabled

by default. The NW(1,2) includes a 19dBi 17° internal antenna. See the ComNet website for the

latest information regarding antenna support. Preconfigured NWK kits do not support point-to-

multipoint topologies.

PC NVR ComNet Gigabit

Managed Switch

with 30W PoE+

NW1

(Recommended

Access Point)

PoE

WIRELESS

CAT5

POWER

ETHERNET DATA

LEGEND

10/100 Ethernet

NW1 (Client)

PoE

PIM or other

PSE device

Power

IP Camera

Ethernet Ethernet

NW1 (Client)

PoE

PIM or other

PSE device

Power

IP Camera

Ethernet Ethernet

NW1 (Client)

PoE

PIM or other

PSE device

Power

IP Camera

Ethernet Ethernet

3.0 Point-to-Point Topology Utilizing Dual Ports

Power

NW1

(Client)

NW1

(Access Point)

ComNet Managed

Switch with 30W PoE

Connected to Network

IP Camera

Power

PoE

10/100 Mbps

Ethernet

PoE

Ethernet

Ethernet Ethernet

PIM or other

PSE device

INS_NetWave_REV– 06/10/13 PAGE 8

INSTALLATION AND OPERATION MANUAL NETWAvE

TECH SUPPORT: 1.888.678.9427

4.0 Cabling Requirements

Shielded CAT 5 or better should be used for all out of plant Ethernet connection and should

be properly grounded through the PoE AC ground. Industrial grade shielded Ethernet cable is

recommended to help prevent ESD damage commonly experienced with outdoor installations.

Visit www.comnet.net/comnet-products/cables

5.0 Hardware Installation

5.1 Outdoor Ethernet Gland Installation

There will be at least one cable gland included with each outdoor enclosure. Below is an image of

the individual parts of the gland with an Ethernet cable routed through.

Note: The split rubber washer allows a pre-terminated Ethernet cable to be used.

Once the cable has been routed through the weather connection, and the RJ45 connection has

been made, screw in the gland into the housing making sure it is tight enough for a water tight

seal. Push the split rubber gasket into place and loosely screw the cap that goes over the rubber

washer.

Once the gland is tight in the housing, tighten the outer nut/cap making sure the rubber seal

squeezes and seals the Ethernet cable to the gland as shown below.

INS_NetWave_REV– 06/10/13 PAGE 9

INSTALLATION AND OPERATION MANUAL NETWAvE

TECH SUPPORT: 1.888.678.9427

Connect one end of an RJ-45 Ethernet cable to the LAN OUT port of the Power Injection

Module (PIM) and the other end to LAN of the access point – as sown below.

Note: Maximum length of the RJ-45 CAT5 cable is 90 meters.

Connect the RJ-45 Ethernet cable attached to the PIM to a network device, such as a switch or

to the configuration PC. Then plug the power adaptor to an AC power outlet and power plug

into the socket of the PIM – as shown in the diagram below.

Note: DC Passive PoE input for the NetWave Radios is 24 - 48VDC.

Ethernet

Network

Edge Device

P1 P2

A. Connect one end of an RJ-45 Ethernet cable to the OUT

port of the Power Injection Module (PIM) and the other end

to LAN of the access point.

Maximum length of the RJ-45 CAT5 cable is 100 meters.*

B. Connect the RJ-45 Ethernet cable attached to the PIM to a

network device, such as to a switch or to the PC you will use

to configure the access point.

C. Connect the power adaptor to the main electrical supply

and the power plug into the socket of the PIM.

PoE power input: Passive PoE (range 24 - 48 VDC).

The unit can also be powered by a suitable IEEE 802.3af/at

PSE device such as a PoE switch or injector. Exception: the

NWK11/M Radios only accepts Passive PoE Power.

D. A Drip Loop is recommended as additional precaution

against moisture entering the Access Point housing.

* Up to 200mW radio. For higher power radio upgrade to higher rating

power adapter.

IMPORTANT: Only plug PoE power to Port 1.

Connecting a PoE power source to the PSE Port (#2) will

cause a major device malfunction and void the warranty.

INS_NetWave_REV– 06/10/13 PAGE 10

INSTALLATION AND OPERATION MANUAL NETWAvE

TECH SUPPORT: 1.888.678.9427

5.2 NetWave Indicating LED Details

WEAK SIGNAL EXCELLENT SIGNAL

LED VISUAL CUE INDICATION

POWER SOLID GREEN Power is supplied to the unit

OFF No power is supplied to the unit or the unit is in reset.

LAN SOLID GREEN LAN Connected

OFF No Connectivity

RSSI1 SOLID RED Weak Connection

RSSI2 SOLID ORANGE Moderate Connection

RSSI3 SOLID GREEN Solid Connection

RSSI4 SOLID GREEN Excellent Connection

(Advisable to check Status Page to confirm RSSI is > -55)

SIGNAL STRENGTH:

RSSI1POWER

RSSI2LAN

RSSI3

RSSI4

5.3 Outdoor Standard Mounting Hardware

This mounting hardware will support pole diameters up to 2 in (5.8 cm). Below are the parts

contained in the standard mounting hardware.

Here is the mounting hardware assembled shown with a NW1/M in a +30° and -30°vertical position

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Comnet Drahtloser Zugangspunkt Handbücher

Comnet

Comnet NW10 Bedienungsanleitung

Comnet

Comnet netwave NW1 Bedienungsanleitung

Comnet

Comnet NetWave NWK7/M Bedienungsanleitung

Comnet

Comnet NetWave NW8 Bedienungsanleitung

Comnet

Comnet NWK7 Bedienungsanleitung

Comnet

Comnet netwave NW1 Bedienungsanleitung

Comnet

Comnet NetWave NWK1/M Bedienungsanleitung

Comnet

Comnet NW10E Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Comnet netwave ComNet Series Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken