Compaq TP Desktop Connector Bedienungsanleitung

CompaqTPDesktopConnector
forACMS
InstallationGuide
Order Number: AA–PG9DK–TE
May 2002
This document provides information about installing the Compaq TP
Desktop Connector software on desktop systems, and about installing the
Compaq TP Desktop Connector Gateway for ACMS software on systems
running the Compaq OpenVMS operating system and Compaq ACMS
software. It also describes activities associated with these installations,
such as the verification procedure.
Revision/Update Information: This is a revised manual.
Software Version: Compaq TP Desktop Connector
Version 3.2
Compaq Computer Corporation
Houston, Texas

© 2002 Compaq Information Technologies Group, L.P.
Compaq, the Compaq logo, ACMS, ACMS Desktop, ACMSxp, DECnet, the DIGITAL logo,
OpenVMS, and VMScluster are trademarks of Compaq Information Technologies Group, L.P. in
the U.S. and/or other countries.
Microsoft, Windows, Windows NT, and Visual C++ are trademarks of Microsoft Corporation in
the U.S. and/or other countries.
Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems,
Inc., in the U.S. and other countries.
All other product names mentioned herein may be trademarks of their respective companies.
Confidential computer software. Valid license from Compaq required for possession, use, or
copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer
Software Documentation, and Technical Data for Commercial Items are licensed to the U.S.
Government under vendor’s standard commercial license.
Compaq shall not be liable for technical or editorial errors or omissions contained herein. The
information in this document is provided "as is" without warranty of any kind and is subject
to change without notice. The warranties for Compaq products are set forth in the express
limited warranty statements accompanying such products. Nothing herein should be construed
as constituting an additional warranty.

Contents
Preface ..................................................... ix
Part I Using the Software Products Library CD
1 Before Installing TP Desktop Connector from the Software
Products Library CD
1.1 Overview of the Software Products Library Installation ....... 1–1
1.2 Software and Hardware Prerequisites . . ................... 1–2
1.3 Installation Procedure Requirements . . . ................... 1–3
2 Installing TP Desktop Connector from the Software Products
Library CD
2.1 Installing the TP Desktop Connector Gateway for ACMS
Software . ........................................... 2–1
2.2 Installing the Client Kit................................ 2–2
3 After Installing from the Software Products Library CD
3.1 After Installing the Gateway Software. . ................... 3–1
3.2 After Installing TP Desktop Connector Client Software ........ 3–1
3.2.1 Editing Startup Files ............................... 3–2
3.2.2 After Installing Non–VMS Clients . . ................... 3–2
3.2.2.1 Transferring Client Files to a Windows System ........ 3–3
3.2.2.2 Transferring Client Files to a Tru64 UNIX System . . . . . 3–4
3.2.3 Installing the Client Services Interface on OpenVMS
Systems ......................................... 3–5
3.2.4 Verifying the Motif Client Sample on OpenVMS .......... 3–5
3.3 Setting Up the Avertz ACMS Sample Application on an
OpenVMS System . ................................... 3–6
iii

3.3.1 Using the Avertz ACMS Sample with Rdb Version 6.0 with
Multiversion ...................................... 3–7
3.3.2 User Name Quotas for the Avertz ACMS Sample . . ....... 3–8
3.3.3 Access Control List for the Avertz ACMS Sample . . ....... 3–8
3.3.4 Rebuilding the Avertz ACMS Sample. . . ................ 3–8
Part II Installing the TP Desktop Connector Client Software
4 TPware Product Suite CD-ROM Overview
4.1 TPware Product Suite CD-ROM Contents . . ................ 4–1
5 Before Installing TP Desktop Connector Software
5.1 Installation Overview . . ................................ 5–1
5.2 Preparing to Install TP Desktop Connector Software. . . ....... 5–1
5.2.1 Product Licenses . . ................................ 5–2
5.2.2 Disk Space ....................................... 5–2
5.2.2.1 Windows Platforms ............................. 5–2
5.2.2.2 Non-Windows Platforms . . ........................ 5–2
5.3 Removing the Installed Software . ........................ 5–3
6 Installing TP Desktop Connector Software on Windows
Operating Systems
6.1 Installation Procedure on Windows Operating Systems . ....... 6–1
6.2 After Installing TP Desktop Connector Software ............. 6–2
6.2.1 Setting Up the TPware Environment . . . ................ 6–2
6.2.2 Accessing the ACMS System . ........................ 6–3
6.2.3 Defining the Network Transport for the Client Services
Interface. ........................................ 6–3
6.2.4 Verifying the TP Desktop Connector Installation . . . ....... 6–3
6.2.5 Running the Windows Sample Client Application . . ....... 6–3
6.2.6 Code Conversion Libraries for Kanji . . . ................ 6–4
iv

7 Installing the TP Desktop Connector Client Services on
Non-Windows Systems
7.1 Overview of the Client Services Installation ................ 7–1
7.1.1 Software Prerequisites . . . ........................... 7–2
7.1.2 Disk Space ....................................... 7–2
7.1.3 Resources ........................................ 7–2
7.2 Installing the Client Services for OpenVMS ................ 7–3
7.2.1 Setting Up the Client Services ........................ 7–3
7.2.2 Installing the Motif Sample Client for OpenVMS ......... 7–4
7.2.3 Verifying the Motif Sample Installation on OpenVMS ...... 7–5
7.2.4 Setting Up the Avertz ACMS Sample Application on an
OpenVMS System ................................. 7–6
7.2.4.1 Using the Avertz ACMS Sample with Rdb Version 6.0
with Multi-Version . . . ........................... 7–7
7.2.4.2 User Name Quotas for the Avertz ACMS Sample ...... 7–7
7.2.4.3 Access Control List for the Avertz ACMS Sample ...... 7–7
7.2.4.4 Rebuilding the Avertz ACMS Sample................ 7–8
7.3 Installing the Tru64 UNIX Client Software ................. 7–9
7.3.1 Installing the Motif Sample Client on Tru64 UNIX
Platforms ........................................ 7–10
7.3.2 Verifying the Motif Sample Installation on Tru64 UNIX
Platforms ........................................ 7–11
Part III Installing the Gateway Software
8 Preparing to Install TP Desktop Connector Gateway for
ACMS Software
8.1 Required Operating System Components ................... 8–1
8.2 Prerequisite Software.................................. 8–1
8.3 Installation Procedure Requirements . . . ................... 8–1
8.3.1 Disk Space ....................................... 8–2
8.3.2 Privileges and Authorization ......................... 8–2
8.3.3 OpenVMS License Management Facility ................ 8–3
8.3.4 System Disk Backup ............................... 8–4
8.3.5 Stopping the ACMS System and Gateway .............. 8–4
8.3.6 Locating the Saveset Directory ....................... 8–4
v

9 Installing TP Desktop Connector Gateway for ACMS Software
9.1 General Installation Information . ........................ 9–1
9.1.1 Accessing the Online Release Notes .................... 9–1
9.1.2 Files and Logical Names Installed on Your System . ....... 9–2
9.1.3 Installation Verification Procedure ..................... 9–2
9.1.4 Aborting the Installation ............................ 9–3
9.2 Installation Procedure . ................................ 9–3
9.2.1 Invoking VMSINSTAL .............................. 9–3
9.2.2 Installation Questions .............................. 9–4
9.2.3 Informational Messages ............................. 9–7
9.2.4 Running the Installation Verification Procedure . . . ....... 9–8
9.2.5 Completing the Installation Procedure. . ................ 9–8
9.3 Recovering from System and Installation Failures............ 9–8
9.3.1 System Failures . . . ................................ 9–8
9.3.2 Installation Failures ............................... 9–9
9.3.3 IVP Error Recovery ................................ 9–10
10 After Installing TP Desktop Connector Gateway for ACMS
Software
10.1 Editing the OpenVMS System Files ....................... 10–1
10.1.1 Editing the System Startup File ...................... 10–1
10.1.2 Editing the System Shutdown File .................... 10–3
10.2 Performing Cluster Procedures . . ........................ 10–3
10.3 Matching Client and Server Versions ...................... 10–3
11 Running the TP Desktop Connector Gateway for ACMS IVP
11.1 IVP Operations ...................................... 11–1
11.2 Running the IVP Independently . ........................ 11–1
11.2.1 IVP Requirements . ................................ 11–1
11.2.2 IVP Steps ........................................ 11–2
11.2.3 IVP Error Recovery ................................ 11–2
Part IV Appendixes
vi

A Files Installed
B Common Configuration Errors
B.1 Errors Related to the Desktop System . . ................... B–1
B.1.1 Errors on OpenVMS Desktops ........................ B–1
B.1.2 Errors on Tru64 UNIX Desktops . . . ................... B–1
B.2 Errors Related to the ACMS System . . . ................... B–2
Index
Examples
2–1 Sample Client Installation ........................... 2–2
Tables
1–1 TP Desktop Connector Disk Space Requirements ......... 1–3
2–1 TP Desktop Connector Files on the Software Products
Library CD....................................... 2–1
3–1 Contents of ACMSDI$NONVMS_CLIENTS .............. 3–2
3–2 VR_DA_BLD_MMS.COM Parameters .................. 3–9
4–1 Contents of the TPware Product Suite CD ............... 4–1
5–1 TP Desktop Connector Client Services Disk Space
Requirements on Non-Windows Systems ................ 5–2
7–1 VR_DA_BLD_MMS.COM Parameters .................. 7–8
8–1 Disk Space Requirements ........................... 8–2
A–1 Files Installed for TP Desktop Connector Client Services for
OpenVMS Systems................................. A–1
A–2 Files Installed for the Motif Sample for OpenVMS
Systems ......................................... A–1
A–3 Files Installed for the Visual Basic Windows Sample....... A–3
A–4 Files Installed for the Forced NonBlocking Tutorial........ A–4
A–5 Files Installed for the Client Services for Tru64 UNIX
Systems ......................................... A–4
A–6 Files Installed for the Motif Sample for Tru64 UNIX
Systems ......................................... A–4
vii


Preface
This guide presents information about installing the Compaq TP Desktop
Connector software on desktop platforms, and the TP Desktop Connector
Gateway for ACMS software on OpenVMS platforms.
Intended Audience
This document is intended for:
• System managers responsible for Compaq ACMS transaction processing
installations.
• Programmers developing client applications with Compaq TP Desktop
Connector software.
To perform the installation and deinstallation procedures described in this
guide, you must have administrator (for Windows platforms), SYSTEM (for
OpenVMS platforms), or superuser (for Tru64 UNIX platforms) privileges, and
you should be familiar with your operating system’s installation procedure.
Related Software
Compaq TP Desktop Connector is part of a transaction processing software
suite that also contains the following product variants:
• Compaq TP Desktop Connector for ACMSxp
• Compaq TP Web Connector
Complete information about the relationships of other software products
with TP Desktop Connector software is available in the Software Product
Description (SPD). The SPD also identifies which versions of your operating
system are compatible with TP Desktop Connector software.
Your product kit includes a copy of the SPD. You can also find it on the
Compaq Web site at
www.compaq.com
by searching for TP Desktop Connector in
Software Product Descriptions.
ix

Related Documents
Installation instructions for the ACMSxp version of TPware software appears
in the following manual:
•Compaq TP Desktop Connector for ACMSxp Installation Guide
The following manuals contain information about building client applications
with TP Desktop Connector products:
•Compaq TP Desktop Connector Getting Started
•Compaq TP Web Connector Getting Started
The following documents contain information on the TP Desktop Connector
Client Services Interface:
•Compaq TP Desktop Connector for ACMS Client Application
Programming Guide
•Compaq TP Desktop Connector for ACMS Client Services Reference
Manual
•Compaq TP Desktop Connector for ACMS Gateway Management Guide
Other manuals contain information about installing and managing your ACMS
system and TP Desktop Connector Gateway for ACMS software:
•Compaq ACMS for OpenVMS Installation
Describes the installation of ACMS software on OpenVMS systems.
•Compaq ACMS for OpenVMS Managing Applications
Explains how to start and stop the ACMS system, monitor system
performance, and perform some tuning operations. It also tells how to
install applications and how to authorize users, devices, and applications.
This guide does not provide details about the OpenVMS installation procedure.
For that information, refer to the Installation and Operations manual for
the particular device that you use. That manual describes the following
procedures:
• Handling and mounting the distribution media
• Readying the current system and target system devices
For information on recommended system management and operations policies
and procedures, refer to your site management guide and the volumes in
the OpenVMS documentation set that pertain to system management and
operations.
x
Inhaltsverzeichnis
Andere Compaq Computerzubehör Handbücher




















