Compaq 307713-001 - V 75 - 17" CRT Display Bedienungsanleitung
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 10/29/97 10:27 AM
Pages: 1 Words: 184 Template: d:\word6\template\commnoti.dot
The information in this guide is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE
LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR
OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE
FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL.
This guide contains information protected by copyright. No part of
this guide may be photocopied or reproduced in any form without
prior written consent from Compaq Computer Corporation.
1997, 1998 Compaq Computer Corporation.
All rights reserved. Printed in Taiwan.
Compaq, Deskpro, and QVision are registered in the U.S. Patent and
Trademark Office.
Microsoft, MS-DOS, Windows, Windows NT, and other names of
Microsoft products referenced herein are trademarks or registered
trademarks of Microsoft Corporation.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
The software described in this guide is furnished under a license
agreement or nondisclosure agreement. The software may be used or
copied only in accordance with the terms of the agreement.
User’s Guide
Compaq V75 Color Monitor
Second Edition (January 1998)
First Edition (November 1997)
Part Number 307716-002
Compaq Computer Corporation
Notice
English 1-1
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 3:26 PM
Pages: 14 Words: 2536 Template: c:\msoffice\templates\working\comm.dot
File Name Ch1_en.doc Part Number 307716-002
book1
ENGLISH
Introduction The Compaq V75 Color Monitor is a microprocessor-based,
intelligent scanning monitor that automatically locks in on the
most common display modes. This monitor operates most
efficiently when used with a Compaq compatible graphics
controller.
Product Features The monitor features include the following:
■ 17-inch CRT with a 16.0-inch (40.6 cm) diagonal viewable
image size
■ Easy-to-access front panel controls to adjust screen
brightness and contrast
■ On-screen display in six different languages: English,
Dutch, French, German, Italian, and Spanish
1-2 English
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 3:26 PM
Pages: 14 Words: 2536 Template: c:\msoffice\templates\working\comm.dot
File Name Ch1_en.doc Part Number 307716-002
■ Universal Serial Bus (USB) pass-through connectors for use
with USB peripherals (mouse, etc.)
■ Plug and Play capability if supported by your system
■ Tilt control (image rotation) functionality
■ Automatically scans all horizontal frequencies between 31.5
and 69 kHz and vertical frequencies between 50 and 100 Hz
■ Supports VGA, Super VGA, and 1024 × 768 resolutions
■ Energy Saver feature, when activated, results in a power
savings of greater than 90 percent
■ Macintosh-compatible timing with optional connector
■ Compliant with the following regulated specifications:
❏ Swedish MPR II 1990
❏ EPA Energy Star
❏ European Union CE Directives
❏ Swedish TCO 1995
Graphics Driver
Compaq has created a Universal Driver Manager (UDM)
release that supports all Compaq QVision graphics controllers
and most graphics controllers found on Compaq Deskpro
products. The UDM eases graphics driver deployment across all
Compaq Deskpro platforms ensuring cross-compatibility and
backward-compatibility. The resulting solution enables
customers to manage and control ongoing software maintenance
costs. The UDM is available on the Support Software CD for
Compaq Desktop, Portable, and Workstation Products and the
Compaq World Wide Web site (www.compaq.com).
✎If the updated Universal Driver Manager that supports the
Compaq monitor is not available on the Web site, contact your
authorized Compaq dealer or reseller.
English 1-3
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 3:26 PM
Pages: 14 Words: 2536 Template: c:\msoffice\templates\working\comm.dot
File Name Ch1_en.doc Part Number 307716-002
■ You can order the Support Software CD for Compaq
Desktop, Portable, and Workstation Products. This compact
disc contains the latest device drivers, utilities, and
flashable ROM images needed to run MS-DOS, Microsoft
Windows 3.1, Windows 95, Windows NT Workstation, and
IBM OS/2 on your Compaq commercial Desktop, Portable,
or Workstation product.
■ You can download the Support software from the Compaq
World Wide Web site (www.compaq.com).
■ You can purchase backup diskettes from your Compaq
authorized reseller, dealer, or service provider.
If you choose to purchase the Support Software CD, you have
two options:
■ You can purchase a single CD-ROM that gives you one-
time access to the latest support software (North America
only, Compaq part number 272505-001).
■ You can purchase a yearly subscription that delivers up to
12 monthly CD-ROMs (Compaq part number 183426-xxx).
The annual subscription ensures your continuous access to the
latest developments.
For help and service outside of the U.S. and Canada or to order
the CD or backup diskettes, contact your Compaq authorized
reseller, dealer, or service provider.
✎If you call Compaq to place an order, be sure to have the serial
number of your monitor available. The serial number is
located on the back of your monitor. This number is necessary
for all purchases.
1-4 English
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 3:26 PM
Pages: 14 Words: 2536 Template: c:\msoffice\templates\working\comm.dot
File Name Ch1_en.doc Part Number 307716-002
Setting Up the
Monitor To set up the monitor, ensure that the power is turned off to the
monitor, computer system, and other attached devices, then
follow these steps:
1. Place the monitor in a convenient, well-ventilated location
near your computer.
2. Remove the door on the rear panel by grasping the thumb
tab and pulling down.
English 1-5
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 3:26 PM
Pages: 14 Words: 2536 Template: c:\msoffice\templates\working\comm.dot
File Name Ch1_en.doc Part Number 307716-002
3. Connect the monitor signal cable 1to the 15-pin connector
on the rear panel of the computer and tighten the screws.
✎Be sure the signal cable aligns with the 15-pin connector. Do not
force the cable onto the connector or you may damage the signal
cable.
4. Connect the monitor power cord 2to the rear panel of the
monitor, then plug the other end into an electrical outlet
that is easily accessible and close to the monitor.
!WARNING: To reduce the risk of electric shock or damage to your
equipment, do not disable the power cord grounding feature. This
equipment is designed to be connected to a grounded (earthed)
power outlet that is easily accessible to the operator. The grounding
plug is an important safety feature.
CAUTION: Be sure that the power outlet you plug your power cord
into is easily accessible and located as close to the monitor as
possible. When you need to disconnect power to the equipment, be
sure to unplug the power cord from the power outlet.
1-6 English
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 3:26 PM
Pages: 14 Words: 2536 Template: c:\msoffice\templates\working\comm.dot
File Name Ch1_en.doc Part Number 307716-002
USB Connectors
The base of the monitor has two Universal Serial Bus (USB)
connectors. Use USB connector ❶to connect the USB signal
cable to the computer. Use connector ❷to connect USB
compatible plug and play devices such as a keyboard, mouse, or
joystick if supported by your computer. This feature provides
USB pass-through and does not support USB host requirements.
CAUTION: This USB connector is not designed for use with high
speed USB devices such as a video camera, scanner, etc. Compaq
recommends connecting high speed devices directly to the computer.
✎These USB connectors operate as a pass-through system. Your
computer must have a USB host controller installed for any
USB-connected devices to operate.
CAUTION: To prevent deterioration of signal transfer or malfunction of
USB devices, USB cables should not exceed 9.75 feet (2.95 meters) in
length. This specific length includes both the USB upstream cable and the
USB downstream cable.
English 1-7
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 3:26 PM
Pages: 14 Words: 2536 Template: c:\msoffice\templates\working\comm.dot
File Name Ch1_en.doc Part Number 307716-002
Operating the Monitor
Front Control Panel
Icon Control Function
1Contrast Adjusts contrast.
2Brightness Adjusts brightness.
3Select Button 1. Launches on-screen display.
2. Selects Function adjustments.
3. Exits menus and on-screen display.
4−Minus Button Selects and adjusts functions.
5+Plus Button Selects and adjusts functions..
6Power Saving LED 1. Green indicates monitor is turned on.
2. Yellow indicates suspend mode.
3. Amber indicates sleep mode.
7Power Switch Turns the monitor on and off.
✎Setting Contrast and Brightness controls to their maximum
settings may cause the screen to seem out of focus. To correct
this appearance, decrease the Brightness setting.
1-8 English
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 3:26 PM
Pages: 14 Words: 2536 Template: c:\msoffice\templates\working\comm.dot
File Name Ch1_en.doc Part Number 307716-002
On-Screen Display Settings
The adjustments for screen settings are located in the on-screen
display (OSD) and can be viewed in one of six available
languages. The on-screen Main Menu displays the following
seven functions:
■ Size and Position—Adjusts the horizontal and vertical size
and position of the screen.
■ Geometry—Adjusts the screen to the required pincushion,
tilt, or trapezoid viewing area.
■ Moiré—Minimizes interference patterns that occasionally
appear on the screen.
■ Degauss—Corrects image distortion or color impurity
caused by magnetic fields.
■ Language—Lists six languages available to display on-
screen menus.
■ Power Saver—Turns power saving features On/OFF.
■ Factory Reset—Resets the screen to its factory settings.
Individually Adjusted Modes
The following functions are individually adjustable for each
mode:
■ Horizontal Size and Position
■ Vertical Size and Position
■ Pincushion
■ Trapezoid
Settings for Tilt, Moiré, Manual Degauss, and Language
Selection apply to all modes.
English 1-9
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 3:26 PM
Pages: 14 Words: 2536 Template: c:\msoffice\templates\working\comm.dot
File Name Ch1_en.doc Part Number 307716-002
Making Adjustments Using the OSD
To make a selection from the on-screen display:
1. Press the Select button ➊on the monitor front panel. The
Main Menu will display on the monitor screen.
Monitor with On-Screen Display
2. To make a selection from the Main Menu, scroll down by
pressing the Minus (−) button ➋located on the monitor
front panel, or by pressing the Plus (+) button ➌to reverse
or back up.
3. Highlight your choice and press the Select button ➊again.
For example, if your selection is Size and Position, press the
Minus button ➋until Size and Position is highlighted, then
press the Select button ➊to choose it.
4. A second level menu displays additional menu items.
Again, press the Minus (−) button ➋to scroll down, or press
the Plus (+) button ➌to reverse or backup.
✎The degauss selection does not have a menu. When you select degauss, the
monitor will correct color impurities on the screen without bringing up
another menu. Color impurities are usually caused by moving or rotating
the monitor or by external magnetic fields. The monitor screen
automatically degausses when the monitor is turned on.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Compaq Monitor Handbücher
Compaq
Compaq V70 Bedienungsanleitung
Compaq
Compaq 8000 - Elite Convertible Minitower PC Bedienungsanleitung
Compaq
Compaq P1100 Bedienungsanleitung
Compaq
Compaq Compaq S720 Bedienungsanleitung
Compaq
Compaq W19Q Bedienungsanleitung
Compaq
Compaq V55 Bedienungsanleitung
Compaq
Compaq 1024 Bedienungsanleitung
Compaq
Compaq TFT5010 Bedienungsanleitung
Compaq
Compaq MV7540 Bedienungsanleitung
Compaq
Compaq P75 Bedienungsanleitung
Compaq
Compaq V700 Bedienungsanleitung
Compaq
Compaq Q2022a Bedienungsanleitung
Compaq
Compaq P 110 Bedienungsanleitung
Compaq
Compaq TFT5000S Gebrauchsanweisung
Compaq
Compaq TFT450 Bedienungsanleitung
Compaq
Compaq Compaq S710 Bedienungsanleitung
Compaq
Compaq P710 Bedienungsanleitung
Compaq
Compaq 1825 Bedienungsanleitung
Compaq
Compaq V900 Gebrauchsanweisung
Compaq
Compaq TFT1720 Bedienungsanleitung
