Compaq 386746-001 - ProLiant - 1600 Kurzanleitung



August 1998

ECG1090898

Prepared by Internet Solutions

Business Unit

Compaq Computer Corporation

Contents

Compaq ProLiant 1600............... 3

Key Features............................. 3

Performance Results................. 4

APPENDIX A: TEST

DISCLOSURE............................... 7

Performance Data

Disclosure.................................. 7

Descriptive Terms ..................... 8

APPENDIX B: RELATED

DOCUMENTS............................. 10





Abstract: The Compaq ProLiant 1600 is well suited as a Microsoft

Exchange Server deployment platform for small and medium-sized

organizations, and for satellite locations of larger organizations. It is

a high performance server with uptime features unmatched in its

class. Using Microsoft’s Load Simulation utility, the new ProLiant

1600 with two 400 MHz Intel Pentium®II processors was tested with

user loads of 8000 simultaneous MAPI e-mail users at Compaq’s

Microsoft Competency Center located in Redmond, Washington.

Microsoft Exchange Server has been the focal point for extensive

development and testing by both Microsoft and Compaq. Throughout

this activity, Compaq and Microsoft have worked to optimize

Microsoft Exchange Server performance on Compaq server products

to provide an optimal balance between performance, availability,

manageability, and cost

 

ECG1090898

Notice

The information in this publication is subject to change without notice and is provided “AS IS” WITHOUT

WARRANTY OF ANY KIND. THE ENTIRE RISK ARISING OUT OF THE USE OF THIS

INFORMATION REMAINS WITH RECIPIENT. IN NO EVENT SHALL COMPAQ BE LIABLE FOR

ANY DIRECT, CONSEQUENTIAL, INCIDENTAL, SPECIAL, PUNITIVE OR OTHER DAMAGES

WHATSOEVER (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS

PROFITS, BUSINESS INTERRUPTION OR LOSS OF BUSINESS INFORMATION), EVEN IF

COMPAQ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

The limited warranties for Compaq products are exclusively set forth in the documentation accompanying

such products. Nothing herein should be construed as constituting a further or additional warranty.

This publication does not constitute an endorsement of the product or products that were tested. The

configuration or configurations tested or described may or may not be the only available solution. This test

is not a determination or product quality or correctness, nor does it ensure compliance with any federal

state or local requirements.

Product names mentioned herein may be trademarks and/or registered trademarks of their respective

companies.

Compaq, Contura, Deskpro, Fastart, Compaq Insight Manager, LTE, PageMarq, Systempro, Systempro/LT,

ProLiant, TwinTray, ROMPaq, LicensePaq, QVision, SLT, ProLinea, SmartStart, NetFlex, DirectPlus,

QuickFind, RemotePaq, BackPaq, TechPaq, SpeedPaq, QuickBack, PaqFax, Presario, SilentCool,

CompaqCare (design), Aero, SmartStation, MiniStation, and PaqRap, registered United States Patent and

Trademark Office.

Netelligent, Armada, Cruiser, Concerto, QuickChoice, ProSignia, Systempro/XL, Net1, LTE Elite,

Vocalyst, PageMate, SoftPaq, FirstPaq, SolutionPaq, EasyPoint, EZ Help, MaxLight, MultiLock,

QuickBlank, QuickLock, UltraView, Innovate logo, Wonder Tools logo in black/white and color, and

Compaq PC Card Solution logo are trademarks and/or service marks of Compaq Computer Corporation.

Microsoft, Windows, Windows NT, Windows NT Server and Workstation, Microsoft SQL Server for

Windows NT are trademarks and/or registered trademarks of Microsoft Corporation.

NetWare and Novell are registered trademarks and intraNetWare, NDS, and Novell Directory Services are

trademarks of Novell, Inc.

Pentium is a registered trademark of Intel Corporation.

Microsoft Exchange Server 5.5 on the Compaq ProLiant 1600

Performance Brief prepared by Internet Solutions Business Unit

First Edition (August 1998)

Document Number ECG1090898

 

ECG1090898

Compaq ProLiant 1600

The Compaq ProLiant 1600 6/400 is a high performance server for workgroup and remote-office

applications with uptime features unmatched in its class. A state-of-the-art 400 MHz Pentium II

processor with dual processing capability provides exceptional performance, while the hot-plug

drives and optional hot-plug redundant power supply deliver increased uptime. The ProLiant

1600 6/400 also provides plenty of headroom for growing network demands, with support for

45.5 GB of hot-plug storage, memory expandable to 1GB and 6 I/O expansion slots.

Key Features

•Intel Pentium® II processor 350 or 400 MHz (dual processor capability)

•512-KB second level ECC cache standard

•100 MHz GTL Bus Design

•64-MB 100 MHz registered SDRAM memory standard, expandable to 1 GB

•Two PCI and four shared PCI/ISA slots (six total slots)

•Compaq Netelligent 10/100 TX PCI UTP Controller (embedded) on the PCI local bus

•Integrated Dual Channel Wide-Ultra SCSI-3 Controller

•Support for up to five 1-inch or two 1.6-inch and one 1-inch hot-plug hard drives

•Internal hot-plug storage capacity up to 45.5 GB. Maximum storage up to 63.7 GB (includes

two available removable media bays)

•I2O Ready

•Integrated Management Display (IMD) (optional)

•Compaq Hot-Pluggable Redundant Power Supply (optional)

•Easy-to-service chassis

•Preinstalled CD-ROM Drive IDE

•Compaq Insight Manager, SmartStart, Integrated Remote Console (IRC) and Automatic

Server Recovery-2 (ASR-2)

•Protected by Compaq Services, including a three-year on-site limited warranty and extended

Pre-Failure Warranty which covers Intel Pentium II processors, memory and disk drives.



ECG1090898

Performance Results

The benchmark was conducted using Microsoft’s Load Simulator tool. For each test, the Load

Simulator Medium MAPI canonical profile was chosen. The Medium MAPI profile reflects the

task workload of a typical corporate e-mail user, including common daily mail tasks such as send,

browse, read, and forward, as well as calendaring tasks and distribution list usage. The Response

Time score represents a 95th-percentile score of the measured test run. The score is expressed in

milliseconds (ms). The ProLiant 1600 Response Time score of 230 ms is well below the 1000 ms

acceptable threshold for e-mail users utilizing Exchange Server’s MAPI protocol. Microsoft has

certified these benchmark results based on the Microsoft Exchange Server 5.5 UPS (Users Per

Server) Policy Guidelines V1.0.

Table 1. Performance Highlights (ProLiant 1600, 6/400, 2 CPU, 1024 MB RAM)

User Load 8,000

Response Time (milliseconds) 230

Messages Submitted (8-hour period) 115,712

Messages Delivered (8-hour period) 147,090

Messages Recipients Delivered (8-hour period) 644,042

Messages Sent (8-hour period) 31,374

Note: Test results based on Microsoft Exchange Server 5.5 UPS Policy Guidelines V1.0. The test result disclosure

can be found in Appendix A

Table 2. Compaq ProLiant 1600 Tested configuration

(2) Intel Pentium II 400-MHz – 512K Level-2 writeback cache per processor

1024 MB ECC SDRAM DIMMs

(2) SMART-2/DH Array Controller

OS/Pagefile/Exchange DS/MTA Files: (2) 4.3-GB Drives – RAID1

Exchange Log Files: (2) 4.3-GB Drives – RAID1

Exchange Information Store Files: (12) 4.3-GB Drives – RAID0

Compaq Netelligent 10/100 TX Embedded UTP NIC

Microsoft Windows Enterprise Server NT 4.0 with Service Pack 3

Exchange Server v5.5 –Enterprise Edition (Tuning: Perfwiz defaults)

Note: The test results disclosure can be found in Appendix A.

What the Benchmarks Don’t Tell You

It is important to understand that benchmarks such as these are designed to give Exchange Server

implementation planners baseline references for understanding the capabilities of hardware

platforms from a single vendor such as Compaq or other competing hardware vendors. When

interpreting these benchmarks, however, two things should be kept in mind.

 

ECG1090898

First, consider whether benchmarks are performed on what can be referred to as customer-

deployable configurations. A hardware vendor may publish a result that is based on a platform or

configuration that should not be deployed in a real-world Exchange Server deployment. For

example, many vendors have published results using disk subsystems configured with RAID0

disk arrays. While RAID0 does provide the highest levels of disk subsystem performance, it fails

to provide any protection against data loss. In addition, most vendors, including Compaq, conduct

benchmarks for Microsoft Exchange Server that are single-server in nature. In the real-world of

messaging, customer sites are usually multi-server and multi-site. Single-server, single-site lab

benchmarks do not account for the communication demands from other servers on the network.

Second, keep in mind that benchmarks do not account for issues such as backup and disaster

recovery or information store maintenance sizing. Whatever the issue, care must be taken when

interpreting benchmarks to ensure that they represent useful information for your Exchange

Server deployment and are based on valid simulation methodologies.

While it is significant that the ProLiant 1600 server can successfully scale to 8000 medium MAPI

e-mail users in a single site, single store benchmark exercise, Compaq does not recommend

deploying 8000 users on this configuration. Compaq recommends careful evaluation of all issues

involved in real-world Exchange Server deployments such as management, administration, and

disaster recovery.

Load Simulator

The main tool used in generating the workload for this scalability demonstration was the

Microsoft Exchange Server Load Simulation utility called Load Simulator. Load Simulator is a

tool for simulating a client user load on an Exchange Server. Its purpose is to enable a single

Windows NT machine called a LoadSim client to simulate multiple Microsoft Exchange client

users.

The operation of Load Simulator users is governed by a Load Simulator profile. This profile

controls factors such as how long a Load Simulator "day" is, how many e-mail messages to send

in a day’s time, how many times to open and read e-mail, whether to use distribution lists,

whether to use public folders, etc.

Load Simulator creates a highly accurate simulation of reality. It mimics the full Microsoft

Exchange Client in many respects. First, it uses .MSG files, the same format used by the

Exchange Client. This guarantees that messages generated by Load Simulator have the same

properties as those sent by real users of the Exchange Client. Second, Load Simulator uses the

same MAPI remote procedure call (RPC) semantics as those used by the Client. Third, Load

Simulator registers MAPI change notifications in the same manner as they are registered by the

Client. Finally, Load Simulator even emulates the Microsoft Exchange Client list box cache,

which the Client uses for folder and message panes in the viewer when a user browses and selects

messages on the server.

 

ECG1090898

Several steps are necessary to perform a successful simulation. The Load Simulator setup and

initialization process comes first. Load Simulator creates the test topology by generating the user

directory entries. Next, the test store is initialized and populated with the test messages and folder

items. The tests are typically run for up to 8 hours depending upon the user load simulated and

amount of time required to reach a steady state for measurement purposes. During a test run,

users log on to the Exchange Server and begin processing various messaging tasks. Task response

time data is logged to the LSPERF.LOG file and client messages and error logging are stored in

the LOADSIM.OUT file. To produce test scores, the LSLOG utility is used to parse the

LSPERF.LOG file and calculate the response time score. By default, 95th- and 50th-percentile

response time scores are calculated. Ninety-fifth-percentile response time scores for the

MAPI/RPC protocol should be less than 1000 ms, according to Microsoft. Also, the Exchange

Server IS Send Queue and the MTA Work Queue (other message and delivery queues should also

be considered, depending on the protocol) must consistently return to near zero during the steady-

state period for which test measurements are taken. Queues that continue to grow and fail to

return to near zero indicate that the server is not sustaining the required workload. There should

be no errors logged by the LoadSim clients during the test. When these conditions are met, a

successful test run has been completed. For more information on LoadSim Medium canonical

profiles, please refer to the LoadSim documentation at:

http://www.microsoft.com/exchange/library/loadsim55x86.exe.

Balancing Scalability and Availability

While server performance and capacity are key criteria in selecting a messaging deployment

platform, one must also consider price and performance. Several competing hardware vendors

offer platforms capable of supporting heavy user loads. They also provide these systems at a price

significantly higher than Compaq's price. Compaq delivers leading performance on industry-

standard platforms with the lowest total cost of ownership.

For many corporations, messaging and collaboration have recently become mission critical.

Unscheduled downtime for any server can result in a significant loss of productivity. To limit

exposure to downtime, Exchange Server 5.5 and Compaq ProLiant Clusters provide high

availability through Microsoft Cluster Server (MSCS). When MSCS is deployed on Compaq

ProLiant Clusters, enterprise-messaging customers can achieve scalability without sacrificing the

reliability that is required in an enterprise environment.

Another critical concern is backup and disaster recovery. Compaq provides industry-leading tape

array and library hardware solutions integrated with applications such as Computer Associates’

Cheyenne ArcServe. These solutions will help meet the requirements of enterprise customers

deploying messaging and collaboration applications.

 !

ECG1090898

APPENDIX A: TEST DISCLOSURE

Table 3. LoadSim Clients and Configuration

LoadSim Clients Configuration

Network type (10Base T, Token Ring, etc.) 100 Base-TX

Number and type of clients (≤40) 2x5/133, 128 MB RAM (≤250 users each) or better

(indicates minimum configuration)

Number and type of hubs/concentrators (full duplex,

switching, etc.) Compaq Netelligent 5708 Switch and Netelligent 2624 Hub

Number of clients/segment 

Client CPU type and speed in percentages 2P/133-MHz Pentium processors or better

"#$""%$&#%' ("")

"#$#&*&+"+

&,

-&#(.-$ #

.)/

0'"#$ (

(#$""# ("")&

& *12"&3!,

Note: Response time measurements were taken from a LoadSim Control Client simulating 100

users configured with 96 MB RAM and a Pentium/166 CPU. The client is located on an isolated

network segment connected to a 100-Mb/s switch.

Performance Data Disclosure

8,000 Users (Measured during test run at steady state)

Table 4. Summary

Supported Benchmark Load 8,000 Users

Weighted 95th Percentile Score 230 milliseconds

Benchmark Profile LoadSim Medium User

Protocol Exchange MAPI

Length of Steady State 4 hours

Length of Test 8 hours

Table 5. Transaction Load (hourly)

Messages Submitted 14,464.0

Messages Recipients Delivered 80,505.25

Messages Sent 3,921.75

Table 6. Transaction Load (per second)

Messages Opens/Sec 30.133

Folders Opens/Sec 7.482

RPC Read Bytes/Sec 25,592

RPC Write Bytes/Sec 179,444

 3

ECG1090898

Table 7. Transaction Queues

IS Send Queue Average Length 3.737

MTA Work Queue Average Length 0.737

Table 8. Processor Utilization

System Processor Utilization (%) 72.84

System Processor Queue Length 2.899

System Context Switches/Sec 2,388

Process % CPU Time - Store 115.20

Process % CPU Time - DS 9.82

Process % CPU Time - MTA 7.38

Table 9. Memory Utilization

Available Bytes 4.89 MB

Pages/Sec 0.038

Process Working Set Bytes - Store 965 MB

Process Virtual Bytes - Store 1.40 GB

Table 10. Logical Drive Utilization

IS Database Disk Reads/Sec 205.469

IS Database Disk Writes/Sec 122.614

IS Database Average Disk Queue Length 4.847

IS Log Disk Reads/Sec 0

IS Log Disk Writes/Sec 91.572

IS Log Average Disk Queue Length 0.039

Descriptive Terms

Messages Submitted

Submit calls made by clients. This equates to total message sends by users.

Messages Sent

Messages that the Store sends to the MTA (not messages sent by clients). Normally all messages

submitted by the clients are sent to the MTA, except in the case where all recipients are local

mailboxes. In that case, since all the deliveries can be performed locally, no message is sent to the

MTA.

Message Recipients Delivered

Separate mailboxes that messages have been delivered to. Think of this as the number of Reads

that are ‘caused’ by sending a message (one per recipient).

Message Opens/Sec

Messages accessed for reading per second

 4

ECG1090898

Folder Opens/Sec

Folders opened for browsing per second

RPC Read Bytes/Sec

RPC Bytes read from clients (i.e., submit calls)

RPC Write Bytes/Sec

RPC Bytes written to clients (i.e., message opens)

IS Send Queue Average Length

Send Queue Size is the number of messages in the private information store's send queue.

MTA Work Queue Average Length

Work Queue Length is the number of outstanding messages in the Work Queue, which indicates

the number of messages not yet processed to completion by the MTA.

Note: Performance results were measured using Microsoft NT Performance Monitor.

Measurements were obtained by measuring averages for the period of steady-state activity (i.e.,

after 8,000 users were successfully logged on). Tests measure the messaging throughput of a

single-server, single-site topology. For deployment-specific information, contact a Microsoft or

Compaq representative. More information can be found at:

http://www.microsoft.com/exchange/support/deployment/planning/deploy.asp?A=5&B=1

 

ECG1090898

APPENDIX B: RELATED DOCUMENTS

These documents are available on the Compaq website.

Compaq and Microsoft Demonstrate Enterprise Scalability with Exchange Server 5.5

http://www.compaq.com/support/techpubs/whitepapers/ECG0961197.html

Microsoft Exchange Server 5.5 on the Compaq ProLiant 850R

http://www.compaq.com/support/techpubs/whitepapers/ECG0710698.html

Microsoft Exchange Server 5.5 on the Compaq ProLiant 3000

http://www.compaq.com/support/techpubs/whitepapers/ECG0720698.html

Microsoft Exchange Server 5.5 on the Compaq ProLiant 6000 Class Servers

http://www.compaq.com/support/techpubs/whitepapers/ECG0730698.html

Compaq Deployment and Configuration Guide: Microsoft Exchange Server on Compaq

ProLiant Servers

http://vcmproapp02.compaq.com/

Performance of Exchange Server 4.0 on Compaq ProLiant Servers

http://www.compaq.com/support/techpubs/whitepapers/444A0696.html

Deschutes Family Processor Technology

http://www.compaq.com/support/techpubs/whitepapers/ecg0500698.html

Disk Subsystem Performance and Scalability

http://www.compaq.com/support/techpubs/whitepapers/ECG0250997.html

Configuring Compaq RAID Technology for Database Servers

http://www.compaq.com/support/techpubs/technotes/184206-1html

Compaq SMART-2SL Array Controller Technology

http://www.compaq.com/support/techpubs/whitepapers/667A0697.html

Hardware vs. Software Fault Tolerance

http://www.compaq.com/support/techpubs/whitepapers/ECG0660298.html

Compaq Pentium Pro Processor-based Servers

http://www.compaq.com/support/techpubs/whitepapers/308A0496.html

Configuring the Compaq ProLiant 5000 Server for Peak Performance

http://www.compaq.com/support/techpubs/whitepapers/679A0697.html

Compaq White Paper Index

http://www.compaq.com/support/techpubs/whitepapers

Andere Handbücher für 386746-001 - ProLiant - 1600

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Compaq Server Handbücher

Compaq

Compaq ProLiant 8500 Handbuch

Compaq

Compaq N2400 - TaskSmart - 1 GB RAM Bedienungsanleitung

Compaq

Compaq ProLiant 400 Bedienungs- und Sicherheitshinweise

Compaq

Compaq ProSignia 200 6/233 Bedienungs- und Sicherheitshinweise

Compaq

Compaq ProLiant 8000 Handbuch

Compaq

Compaq AlphaServer DS20 Bedienungsanleitung

Compaq

Compaq ProLiant 400 Kurzanleitung

Compaq

Compaq DH-64BAA-AA - AlphaServer - ES40 Bedienungsanleitung

Compaq

Compaq BL10e - HP ProLiant - 512 MB RAM Bedienungsanleitung

Compaq

Compaq 234664-002 - ProLiant - ML330T02 Handbuch

Compaq

Compaq AlphaServer ES40 Bedienungs- und Wartungsanleitung

Compaq

Compaq DL760 - ProLiant - 1 GB RAM Installationsanleitung

Compaq

Compaq AlphaServer 160 Bedienungsanleitung

Compaq

Compaq ProLiant 1000 Kurzanleitung

Compaq

Compaq 179740-001 - ProLiant - 3000 Kurzanleitung

Compaq

Compaq t1000 - Terminal Thin Client PC Bedienungsanleitung

Compaq

Compaq 108164-003 - ProLiant - 800 Kurzanleitung

Compaq

Compaq TruCluster Server AA-RHGWB-TE Bedienungsanleitung

Compaq

Compaq BL10e - HP ProLiant - 512 MB RAM Bedienungsanleitung

Compaq

Compaq ProLiant 400 Kurzanleitung

Compaq

Compaq Evo Thin Client t20 Bedienungsanleitung

Compaq

Compaq 108164-003 - ProLiant - 800 Kurzanleitung

Compaq

Compaq 1850R - ProLiant - 128 MB RAM Bedienungs- und Sicherheitshinweise

Compaq

Compaq 195294-001 - ProLiant - ML370R Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung