Compliant Technologies E-Band Bedienungsanleitung

The E-Band / E-Vest

USER MANUAL

Compliant+Technologies+–+User+Manual+

TABLE OF CONTENTS

CHAPTER 1: ……….......……………………….….. Safety and Terms

Safety…………….……………………………………………Page 3

Terms…..……………….…………………………….………Page 4

CHAPTER 2: General Overview, Specifications and Components

General Overview and Specifications...……...………..Page 5

Components ……………………….………………………..Page 6

CHAPTER 3: …….…..………… Pre Operational Checks, Charging

Pre Operational Checks…………………………………..Page 8

Charging…………………………….……………………….Page 9

CHAPTER 4: ……..………….…… Basic E-Band/E-Vest Operations

Basic E-Band/E-Vest Operations………………………Page 10

CHAPTER 5: …………… Medical, Physiological Effects and ExDS

Medical and Physiological Effects……………………Page 11

ExDS………………………………………………………..Page 12

CHAPTER 6: ..…....…..Tactical Considerations for Use of Force

Tactical Considerations for Use of Force……..……Page 13

CHAPTER 7: …..……....…..…. Suggested ROE and Post Incident

Suggested ROE………………………………………….Page 15

Post Incident…….……………………………………….Page 18

CHAPTER 8: ……...….… Trouble Shooting and Decontamination

Trouble Shooting……………………………………..…Page 19

Decontamination………………………………..………Page 23

CHAPTER 9: …….…..………… Warranty and Contact Information

Warranty………………………………………………….Page 24

Contact Information…………………………….……..Page 24

Pictured on cover:

Compliant Technologies CT-EBA / CT-EV

Compliant+Technologies+–+User+Manual+

CHAPTER 1: Safety and Terms

SAFETY:

CEW’S (Conducted Electrical Weapon) are not risk free and should be treated

seriously like any other weapon. Follow all laws, agency policies and TTP’s

(Tactics Techniques and Procedures) when employing the E-Band / E-Vest CEW

or any weapon.

CEW’s can provide force multiplication to one or more officers and thus

enhance the safety of the user(s) and the public through apprehension and de-

escalation by non-lethal means of force but at the same time can be dangerous

if not used correctly. Follow all Cautions, Warnings and Notes highlighted

throughout this manual.

TERMS:

If not followed can result to injury or death

If not followed can result in equipment damage or failure

Information to be highlighted

Compliant+Technologies+–+User+Manual+

CHAPTER 1: Safety and Terms

TERMS: CONTINUED…

WILL/SHALL Mandatory and Non-Negotiable

SHOULD Suggested Course of Action

MAY Option at the users discretion

CEW Conducted Electrical Weapon

E-BAND Electronic Band Restrictor (Arm / Leg)

E-VEST Electronic Vest

TTP’s Tactics, Techniques and Procedures

NPI Neuro Peripheral Interference

ROE Rules of Engagement

In order to operate The E-Band or E-Vet you must be trained and qualified

on this tool. See your agency’s instructor for training and qualification or

contact Compliant Technologies for more information.

Once qualified and certified on The E-Band /E-Vest an individual’s

certification is good for 2 years from the date of course completion. All

individuals will have to go through re-certification or instructor level

courses by the end of their second year. Failure to complete the bi-annual

training will disqualify you from device use until you recertify.

Compliant+Technologies+–+User+Manual+

CHAPTER 2: General Overview, Specifications and Components

The E-Band and E-Vest are tools used within the Force Continuum to

supplement existing Law Enforcement, Corrections, Security, Military and EMS

personnel. It is not intended to replace any intermediate tool but to supplement

existing assets and agency TTP’s.

The E-Bands and E-Vests are CEW tools are ideal for Corrections and Law

Enforcement transporting individuals, court room appearances and medical

visits.

The E-Band / E-Vest construction is made up of high-grade leather and man-

made materials. There are 3 models for these devices but the CEW functionality

of each model is the same.

GENERAL SPECIFICATIONS:

(Pictured on Right):

Compliant Technologies

A2G2 Fingerless Gloves with Carbon Fiber Knuckles

Color: Black

Material: calf or goat skin, neoprene and polyester fiber

Two models to choose from: Arm or Leg

Charge time: 4 hours

Stand-by time: 24 hours

Continuous working time: 2 hours

Snap-type locking mechanism

Magnetically operated

Remotely controlled (300 meters)

3.7 Volt Lithium Ion Battery

Maximum Voltage: 210-320V (cannot go above 380V)

Maximum Current: 0.9-1.5A

Pulse Duration (µS) : 105-115 (.0001 second)

Pulse charge [µC] 84 –125 (.0001 Amp-Second)

Pulse repetition rate [pps] 29.7 –30.8

Duty cycle [%] 0.32 –0.35

Compliant+Technologies+–+User+Manual+

CHAPTER 2: General Overview, Specifications and Components

Compliant+Technologies+–+User+Manual+

DO NOT

WASH

CHAPTER 2: General Overview, Specifications and Components

Do not purposely immerse The E-Band / E-Vest in water or put into the

washing machine. This will destroy the electronics in these devices and

void the manufactures warranty!

Compliant+Technologies+–+User+Manual+

CHAPTER 3: Pre-Operational Checks and Charging

PRE-OPERATIONAL CHECKS

Before going on duty inspect Compliant Technologies’ E-Bands / E-Vest

CEW’s for overall condition to include:

•Velcro adherence

•Tears or frays in materials inside and out

•General condition of Contact Pad

•Loose components

•Stains or contaminates

•Remote Control Condition, switch and light activation

•On/Off Activation (Red and Green Light on)

•Operational “Tap Test” – Optional

•Visually inspect Charger for proper connections and loose wiring (Red

and Green Light)

If any component that effects the operational worthiness and readiness of

the device is deemed unserviceable remove it from service and contact

Compliant Technologies.

Compliant+Technologies+–+User+Manual+

CHAPTER 3: Pre-Operational Checks and Charging

Inspect the E-Band / E-Vest charger before plugging it in. Make sure there are no

frayed or broken wires and that the adaptor plug is securely connected to the

wires leading to the power supply.

The power supply has a light that glows red or green. Each light represents the

status of the device. When charging, the power supply light will be red until

charging is complete at which time the light will turn green. Simply unplug The E-

Band / E-Vest and the power supply and store until use is required.

The charge on the device can last for months if not turned on and up to a few days

when in the “ON / STANDBY” mode. Once in action the device can stun for over 2

hours of continuous use.

When the charge on device is getting low the light will flash red indicating it’s

time to recharge the battery. If not use for a prolonged period charge the device

monthly to keep it in a ready mode.

Compliant+Technologies+–+User+Manual+

CHAPTER 4: Basic E-Band / E-Vest Operations

The E-Band / E-Vest is magnetically operated and remotely controlled. The

devices are turned ON/OFF by holding the magnetic key up to the right upper

side of battery compartment for 3 seconds. The red stand-by light will

illuminate. Pressing the remote will active the device and the light on the

battery compartment will turn green letting you know the device is activated

and current is flowing to the contact pads. Releasing the button will stop the

flow of current and light will return back to red indicating the device is back in

the stand-by mode. To turn device off reverse the process with same magnetic

key again for 2-3 seconds and the red light will go out.

An Operational “Tap Test” which is Optional can be performed by activating the

remote control on the E\Band \ E-Vest and quickly tapping it on the hand or

forearm. The device will give the user a slight electrical charge letting the

operator know it’s operational.

When turning on the devices, current momentarily crosses the pads

prior to entering Stand-By mode. Turn the device on before attaching to

the body.

The device must come in contact with the subject’s skin.

The device is not affective through clothing or hair and can be degraded

on individuals who are extremely hairy.

The user and other officers can touch the person the device is applied to

without fear of being shocked.

The device can get wet but can’t be immersed in water. The

effectiveness of The device does not change or diminish when the

subject or user are wet.

The device should not be operated around flammable substances.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Compliant Technologies Schutzvorrichtung Handbücher

Compliant Technologies

Compliant Technologies G.L.O.V.E. GEN 3 Technisches Datenblatt

Beliebte Schutzvorrichtung Handbücher anderer Marken

Sola HD

Sola HD STV100K Series Bedienungsanleitung

socomec

socomec COUNTIS AMd Bedienungsanleitung

Kemo Electronic

Kemo Electronic M148-24 Bedienungsanleitung

SK ClickClick Bedienungsanleitung

Endress+Hauser

Endress+Hauser HAW569 Bedienungsanleitung

Ultrasonic

Ultrasonic SonicPRO Bedienungsanleitung

nxt

nxt BIA-nXt-DPC 1-22 Bedienungsanleitung

TFortis

TFortis SG-Switch Bedienungsanleitung

BERNINI DESIGN

BERNINI DESIGN Be172 Bedienungsanleitung

Rayleigh Instruments

Rayleigh Instruments RI-ENERGYSET-3P-ESS-50-100 Bedienungsanleitung

GE Multilin 3 Series Bedienungsanleitung

E.K.T.

E.K.T. ke-DP01 Bedienungsanleitung

Siemens

Siemens SIPROTEC 7SD80 Bedienungsanleitung

cias

cias MICRO-RAY Bedienungsanleitung

Sungrow

Sungrow PVS-16MH Bedienungsanleitung

Reer

Reer 32010 Bedienungsanleitung

Tyco

Tyco ESFR-17 Bedienungsanleitung

Ross

Ross Opengear SRA-8901-R Bedienungsanleitung