COMPRO VideoMateIP50 Bedienungsanleitung

VideoMate IP50/50W

Indoor Fixed Network Camera

Installation Guide

Compro Technology, Inc.

www.comprousa.com

be copied or reproduced in any form or by any means without the prior written

consent of Compro Technology, Inc.

Compro, VideoMate, Poladyne, Play with Power, and the Compro logo are

trademarks of Compro Technology, Inc. Other names and marks are trademarks

of their respective owners.

COMPRO makes no warranties with respect to this documentation and disclaims

any implied warranties of merchantability, quality, or fitness for any particular

purpose. The information in this document is subject to change without notice.

COMPRO reserves the right to make revisions to this publication without

obligation to notify any person or entity of any such changes.

Compro Technology, Inc. www.comprousa.com

Tel. +886 2 2918 0169, Fax +886 2 2915 2389

4/F, No.12, Alley 6, Lane 45, Pao Shin Road Hsintein City, Taipei, Taiwan.

Table of Contents

IP50 / 50W Network Camera Hardware Layout ................... 4

Package Contents ................................................................. 4

Assembly and Disassembly the Stand................................... 5

Mounting on the Ceiling........................................................ 6

Cable Connections ................................................................. 6

Wireless Connection............................................................... 7

IP50(W) Digital I/O Connector Block ................................... 7

Web Browser Access (Internet Explorer) ........................... 20

The Internet Setting ........................................................... 22

Access the IP Camera via 3GPP Mobile Phone .................... 23

Access the IP Camera via iPhone/mobile device ................ 24

Start ComproView ................................................................25

Firmware Update ................................................................ 30

Troubleshooting.................................................................. 31

Initial Hardware / Software Setup ..........................................31

Installation ........................................................................31

iWizard .............................................................................32

Hardware wiring check........................................................32

Camera Reset ....................................................................33

Trouble with the ActiveX Client ..............................................34

Trouble with ComproView ......................................................36

Remote Viewing via Internet Explorer .....................................38

IP50 / 50W Network Camera Hardware Layout

Package Contents

* IP50/IP50W indoor network IP camera

* Quick Installation Guide

* Software CD (Includes ComproView software and manual file)

* DC adapter AC100V-240V in / DC12V

* Screws for ceiling mount

* Screw mount

* LAN cable

*Wireless antenna (IP50W only)

Assembly and Disassembly the Stand

Assembly

Disassembly

Mounting on the Ceiling

If user wants to set IP50(W) on the wall, please use the screws to fix

the bracket on the flat surface. After the bracket is fixed on the wall,

please try to adjust the angle to the desire position.

Cable Connections

If user connects the IP camera on the intranet, then the same group

of user can share that IP camera to use.

1. Plug in the power adapter to camera.

2. Use the standard RJ-45 network cable to connect with the Compro

IP 50(W).

Important!

If the power cable (IP50W) and the network cable (IP50) are not

securely fastened, it could lead to unstable connection.

Wireless Connection (IP50W only):

On the IP50W model, you also have the option of using the wireless

connection method. Please keep in mind that you can only have one

active connection only, via LAN or wireless.

If user connects the IP camera on the intranet, then the same group

of user can share that IP camera to use. Please ensure that the

wireless antenna had been securely fastened, otherwise it could lead

to unstable connection.

Important!

1. The operation of the IP50W wireless network may be interfered

should there be other 2.4GHz devices working in the vicinity, e.g.

microwave oven, digital cordless camera, etc. You may experience

slow frame rate or drops in connection; up on such situation, we

suggest that you try to move the IP camera around the area or try

to shut off other appliances.

2. Since wireless cameras cause interferences during transmission,

you may encounter erratic behaviors when there are more than

10x operating in close proximity.

3. The default wireless connection method is via 802.11g standard

and you should experience a stable connection of up to 20 meters

between the access point and the camera unit. Your wireless

performance may vary depending on the operating environment,

building material, etc.

IP50(W) Digital I/O Connector Block

The I/O connector on the back of the IP50W provides a central

interface between your home security system and various output

devices.

The two digital inputs are normally used with security sensors, e.g.

passive infrared sensor (PIR), smoke detector, door/window open

sensor, etc. This input works by detecting a change in the state, open

and closed circuit. You can check the status of the circuit by going to

the Setup > Event Setup > I/O Status.

The output port is normally used to trigger external audio or visual

indicators, e.g. sirens or strobe lights, etc.

Name

Specification

Note

1 –4

Digital Input

Ports 1 & 2

Max 5VDC,

60mA

Floating, TTL

5 - 7

Digital Output

Port

Max 24VDC, 1A

Max 125VAC,

You can only use

either the normally

open (NO) or

normally closed

(NC) at any given

time.

Note: The above output scenario is where the siren will only sound

when it the input had been triggered. Should you wish to use the

other way where the output device is always on when it had not been

triggered, please use NC.

Hardware and Software Installation

Before Compro software installation, user has to make sure the IP

Camera is beside you. The installer on the software CD will help you to

step-by-step install IP camera hardware and software on your

system.

1. Insert the Compro software installation CD to CD-ROM drive, it will

automatic start the program for installation, please select your

language at first.

2. Please click “IP Camera Setup”and “Start”to install your IP

camera. Also, you can select other icons to open the related

documents, browse CD contents, or exit.

3. Step1: Connect your camera as the picture shown, or you can click

to watch the tutorial video. After connect all the network and

power cables, please click “Next”.

4. Check the LED light of IP camera is working properly. And click

“Next”to searching your camera.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere COMPRO Sicherheitskamera Handbücher

COMPRO

COMPRO IP540 Bedienungsanleitung

COMPRO

COMPRO TN920P Bedienungsanleitung

COMPRO

COMPRO TN900 Bedienungsanleitung

COMPRO

COMPRO TN3230 Bedienungsanleitung

COMPRO

COMPRO TN96P Bedienungsanleitung

COMPRO

COMPRO TN1500 Bedienungsanleitung

COMPRO

COMPRO TN900R Bedienungsanleitung

COMPRO

COMPRO NC420 Bedienungsanleitung

COMPRO

COMPRO VideoMate IP50 Bedienungsanleitung

COMPRO

COMPRO IP70 Bedienungsanleitung

COMPRO

COMPRO IP55 Bedienungsanleitung

COMPRO

COMPRO IP55 Bedienungsanleitung

COMPRO

COMPRO TN900R Bedienungsanleitung

COMPRO

COMPRO TN4230 Bedienungsanleitung

COMPRO

COMPRO IP60 Bedienungsanleitung

COMPRO

COMPRO TN30 Bedienungsanleitung

COMPRO

COMPRO CS530 Bedienungsanleitung

COMPRO

COMPRO IP55 Bedienungsanleitung

COMPRO

COMPRO NC3230 Bedienungsanleitung

COMPRO

COMPRO TN80 Bedienungsanleitung

COMPRO

COMPRO TN50 Bedienungsanleitung

COMPRO

COMPRO TN65 Bedienungsanleitung

COMPRO

COMPRO TN70 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung