COMPX Regulator AT Bedienungsanleitung

, Keyless Locking 8

Rev. A 11/16

PN:

334001000000

, Keyless Locking 1

Instruction Manual

, Keyless Locking 2

Thank you for purchasing the CompX

. The is

an innovative solution for locking cabinet doors and drawers. With (3) cylinder

lengths from which to choose, it can be installed on cabinet doors or drawers

with a material thickness from 1/32” to 1-7/16”. Powered by 2-AAA batteries

(included), operates using a 4 to 8 digit code.

All user programming must be done using the RegulatoR -Active Track

Excel spreadsheet. See http://compx.com/regulator/activetrack

•Minimum System Requirement

oWindows7 – Excel 2007

•USB cable required (not included) for connection to spreadsheet

•is intended for interior use only

•Operating Temperature: 50°F – 120°F (10°C – 48°C)

Packaged Components

CompX

is offered in two versions: manual lock and self-

locking featuring SlamCAM. The contents of the box will vary depending on

the version.

Contents – Manual Lock Version:

•Manual lock Lock assembly

•(2) AAA alkaline batteries

•(1) Offset locking cam & (1) Straight locking cam

•FlexaCam adapters

•Mounting hardware

, Keyless Locking 7

SlamCAM spacer discs (if so equipped) can be inserted between the lock barrel

and SlamCAM mechanism to adjust the backset. See image below:

FlexaCam adaptors (if so equipped) can be attached to the cam to provide up to

12 different dimensional variations. See image below:

, Keyless Locking 6

Part Number Descriptions

Example: REG-AT-S-L-3-BK

REG-AT = RegulatoR Standard Knob w/audit trail

REGS-AT = RegulatoR Short Knob w/audit trail

Version:

S= Self-locking; featuring SlamCAM

M= Manual locking, standard CompX National cams

Mounting:

L= Left hand mount, door application - hinge on left side when facing cabinet

R= Right hand mount door application - hinge on right side when facing cabinet

V= Vertical mount door application (keypad located above locking point)

T= Top vertical mount door application (keypad located below locking point)

Cylinder Length:

1= 7/16" cylinder length

3= 1-3/16" cylinder length

5= 1-3/4" cylinder length

Color:

BK = Matte black housing & knob

No suffix = Standard silver housing & knob

-------------------------------------------------------------------------------------------------

Replacement Parts

REG-KIT-KNOB - replacement knob kit

REG-KIT-KNOBS - replacement short knob kit

213005000000J - replacement battery door

, Keyless Locking 3

Packaged Components cont.

Contents – Self-Lock Version:

•Self-locking Lock assembly featuring

SlamCAM

•(2) AAA alkaline batteries

•SlamCAM spacer discs

•Mounting hardware

Powering Up and Battery Installation

CompX

is shipped with two installed AAA batteries. While

features a low battery indicator, scheduled battery replacement is

recommended. Mixing batteries of different chemistries could damage the

resulting in lock failure.

To power up , pull the red tag. The lock is now ready for use.

Note: In the event the batteries should die, they can be replaced via the external

battery compartment.

If equipped, a tamper resistant T-15 pin-in Torx

(6-lobe) bit or driver (not

included) will be required to remove the battery cover.

Restoring Factory Codes

The RegulatoR -AT features a factory reset code which will restore the default

1-2-3-4 & 1-2-3-4-5 codes. The was shipped with reset stickers;

one attached to the back of the and an extra sticker that should

be kept in a safe and secure location for future reference if needed.

To restore the factory default codes, type the Factory Reset Code assigned to the

and press and hold ENTER for 3 seconds.

Care and Cleaning

To clean the surface, apply non-acid based cleaner to a clean

cotton cloth; do not spray cleaner directly on the . Wipe down

keypad and its respective housing surfaces of excess cleaner.

, Keyless Locking 4

Operating the with Self-locking

CompX

is offered with self-locking featuring SlamCAM. If

your lock is the self -locking version, follow the directions below to unlock and

lock the :

To operate the standard self-locking version:

Type a valid code, press ENTER and rotate knob clockwise 90°, hold knob until

door or drawer is open then release the knob. knob will

automatically return to the locked position and the door or drawer can be closed

at any time.

, Keyless Locking 5

Operating the with Manual locking

CompX

is also offered in a manual locking version. If your

lock is the manual locking version, follow the directions below to unlock and

lock the .

To operate the standard manual locking version:

Type a valid code, press ENTER and rotate knob clockwise 90°. To lock, close

the door or drawer and rotate knob 90° counterclockwise.

, Keyless Locking 4

Operating the with Self-locking

CompX

is offered with self-locking featuring SlamCAM. If

your lock is the self -locking version, follow the directions below to unlock and

lock the :

To operate the standard self-locking version:

Type a valid code, press ENTER and rotate knob clockwise 90°, hold knob until

door or drawer is open then release the knob. knob will

automatically return to the locked position and the door or drawer can be closed

at any time.

, Keyless Locking 5

Operating the with Manual locking

CompX

is also offered in a manual locking version. If your

lock is the manual locking version, follow the directions below to unlock and

lock the .

To operate the standard manual locking version:

Type a valid code, press ENTER and rotate knob clockwise 90°. To lock, close

the door or drawer and rotate knob 90° counterclockwise.

, Keyless Locking 6

Part Number Descriptions

Example: REG-AT-S-L-3-BK

REG-AT = RegulatoR Standard Knob w/audit trail

REGS-AT = RegulatoR Short Knob w/audit trail

Version:

S= Self-locking; featuring SlamCAM

M= Manual locking, standard CompX National cams

Mounting:

L= Left hand mount, door application - hinge on left side when facing cabinet

R= Right hand mount door application - hinge on right side when facing cabinet

V= Vertical mount door application (keypad located above locking point)

T= Top vertical mount door application (keypad located below locking point)

Cylinder Length:

1= 7/16" cylinder length

3= 1-3/16" cylinder length

5= 1-3/4" cylinder length

Color:

BK = Matte black housing & knob

No suffix = Standard silver housing & knob

-------------------------------------------------------------------------------------------------

Replacement Parts

REG-KIT-KNOB - replacement knob kit

REG-KIT-KNOBS - replacement short knob kit

213005000000J - replacement battery door

, Keyless Locking 3

Packaged Components cont.

Contents – Self-Lock Version:

•Self-locking Lock assembly featuring

SlamCAM

•(2) AAA alkaline batteries

•SlamCAM spacer discs

•Mounting hardware

Powering Up and Battery Installation

CompX

is shipped with two installed AAA batteries. While

features a low battery indicator, scheduled battery replacement is

recommended. Mixing batteries of different chemistries could damage the

resulting in lock failure.

To power up , pull the red tag. The lock is now ready for use.

Note: In the event the batteries should die, they can be replaced via the external

battery compartment.

If equipped, a tamper resistant T-15 pin-in Torx

(6-lobe) bit or driver (not

included) will be required to remove the battery cover.

Restoring Factory Codes

The RegulatoR -AT features a factory reset code which will restore the default

1-2-3-4 & 1-2-3-4-5 codes. The was shipped with reset stickers;

one attached to the back of the and an extra sticker that should

be kept in a safe and secure location for future reference if needed.

To restore the factory default codes, type the Factory Reset Code assigned to the

and press and hold ENTER for 3 seconds.

Care and Cleaning

To clean the surface, apply non-acid based cleaner to a clean

cotton cloth; do not spray cleaner directly on the . Wipe down

keypad and its respective housing surfaces of excess cleaner.

, Keyless Locking 2

Thank you for purchasing the CompX

. The is

an innovative solution for locking cabinet doors and drawers. With (3) cylinder

lengths from which to choose, it can be installed on cabinet doors or drawers

with a material thickness from 1/32” to 1-7/16”. Powered by 2-AAA batteries

(included), operates using a 4 to 8 digit code.

All user programming must be done using the RegulatoR -Active Track

Excel spreadsheet. See http://compx.com/regulator/activetrack

•Minimum System Requirement

oWindows7 – Excel 2007

•USB cable required (not included) for connection to spreadsheet

•is intended for interior use only

•Operating Temperature: 50°F – 120°F (10°C – 48°C)

Packaged Components

CompX

is offered in two versions: manual lock and self-

locking featuring SlamCAM. The contents of the box will vary depending on

the version.

Contents – Manual Lock Version:

•Manual lock Lock assembly

•(2) AAA alkaline batteries

•(1) Offset locking cam & (1) Straight locking cam

•FlexaCam adapters

•Mounting hardware

, Keyless Locking 7

SlamCAM spacer discs (if so equipped) can be inserted between the lock barrel

and SlamCAM mechanism to adjust the backset. See image below:

FlexaCam adaptors (if so equipped) can be attached to the cam to provide up to

12 different dimensional variations. See image below:

, Keyless Locking 8

Rev. A 11/16

PN:

334001000000

, Keyless Locking 1

Instruction Manual

Inhaltsverzeichnis

Andere COMPX Sperren Handbücher

COMPX

COMPX Stock Locks C1975 Leitfaden

COMPX

COMPX Timberline CB-280 Bedienungsanleitung

COMPX

COMPX National D150CB Bedienungsanleitung

COMPX

COMPX Timberline CB-265 Bedienungsanleitung

COMPX

COMPX CB095-195 Bedienungsanleitung

COMPX

COMPX 1KSERIES Bedienungsanleitung

COMPX

COMPX Timberline CB-241 Bedienungsanleitung

COMPX

COMPX Stock Locks C1701 Leitfaden

COMPX

COMPX Stock Locks C4201 Leitfaden

COMPX

COMPX 4355-19A Flex-Ace Benutzerhandbuch

COMPX

COMPX Stock Locks C1703 Leitfaden

COMPX

COMPX CB087-187 Bedienungsanleitung

COMPX

COMPX CB085-185 Bedienungsanleitung

COMPX

COMPX Stock Locks C1968 Leitfaden

COMPX

COMPX APEX Bedienungsanleitung

COMPX

COMPX Stock Locks C5002LP Leitfaden

COMPX

COMPX C8139 Leitfaden

COMPX

COMPX Chicago Tubar IC-12L Bedienungsanleitung

COMPX

COMPX TYPE310 Leitfaden

COMPX

COMPX Stock Locks C4073 Leitfaden

COMPX

COMPX elock Bedienungsanleitung

COMPX

COMPX 4255-19RL Benutzerhandbuch

COMPX

COMPX Stock Locks BL12L Series Leitfaden

COMPX

COMPX MFW 29138 Leitfaden

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung

Metra Electronics

Metra Electronics Door Access Terminal Combo Bedienungsanleitung

Kilitronik

Kilitronik miniK10m Bedienungsanleitung