Comtrend Corporation WAP-EN1750W Bedienungsanleitung

WAP-EN1750W

NMS User Manual

Version 1.0, November 2015

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B Digital Device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction, may cause harmful

interference to radio communication. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected

Consult the dealer or an experienced radio/TV technician for help.

The changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be

co-located or operating to conjunction with any other antenna or transmitter.

This equipment should be installed and operated with minimum distance 20cm between the radiator &

your body.

proprietary to Comtrend Corporation. No part of this document may be translated, transcribed,

reproduced, in any form, or by any means without the prior written consent of Comtrend Corporation.

This program is free software: you can redistribute it and/or modifyit under the terms of the GNU

General Public License as published bythe Free Software Foundation, either version 3 of the License,

or(at your option) any later version.

This program is distributed in the hope that it will be useful,but WITHOUT ANY WARRANTY; without

even the implied warranty ofMERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See theGNU

General Public License for more details.

You should have received a copy of the GNU General Public Licensealong with this program. If not, see

http://www.gnu.org/licenses/

NOTE: This document is subject to change without notice.

Protect Our Environment

This symbol indicates that when the equipment has reached the end of

It’s useful life, it must be taken to a recycling centre and processed separate from domestic

waste.

The cardboard box, the plastic contained in the packaging, and the parts that make up this router can be

recycled in accordance with regionally established regulations. Never dispose of this electronic

equipment along with your household waste; you may be subject to penalties or sanctions under the

law. Instead, please be responsible and ask for disposal instructions from your local

I. Product Information

The Network Management Suite (NMS) supports the central management of a

group of access points, otherwise known as an AP Array. NMS can be

installed on one access point and support up to 5 access points with no

additional wireless controller required, reducing costs and facilitating efficient

remote access point management.

Access points can be deployed and configured according to requirements,

creating a powerful network architecture which can be easily managed and

expanded in the future, with an easy to use interface and a full range of

functionality –ideal for small and mid-sized office environments. A secure

WLAN can be deployed and administered from a single point, minimizing cost

and complexity.

II. Quick Setup

One AP (access point) is designated as the AP Controller (master) and other

connected APs are designated as Managed APs (slaves). Using the NMS you

can monitor, configure and manage all Managed APs (up to 5) from the single

AP Controller.

Follow the steps below:

1. Connect all APs to an Ethernet or PoE switch which is connected to a

gateway/router.

You can use your router as a DHCP server or you can later

configure your AP Controller as a DHCP server.

2. Ensure all APs are powered on and check the LED status.

3. Designate one AP as the AP Controller which will manage all other

connected APs (up to 5).

4. Connect a computer to the AP Controller using an Ethernet cable.

Connect the AP Controller to power and power on the unit.

5. Open a web browser and enter the AP Controller’s IP address in the

address field. The default IP address is 192.168.2.2.

DHCP is enabled on the access point by default. If no DHCP

Service is found, the access point will default to IP address

192.168.2.2.

Your computer’s IP address must be in the same subnet as the AP

Controller. 192.168.2.10 is being used in this example.

6. Enter the username & password to login. The default username &

password are admin & 1234 respectively.

7. You will arrive at the Access Point Information screen. Go to “Operation

Mode” and select “AP Controller Mode” from the drop down menu.

8. Click “Apply” to save the settings.

9. Your Controller AP & Managed APs should be fully functional. Use the top

menu to navigate around the NMS.

Use Local Network & Local Settings to configure your Controller AP.

Use Dashboard, Zone Plan, NMS Monitor & NMS Settings to configure

Managed APs.

Use Toolbox to diagnose connection issues.

III. Software Layout

The top menu features 7 panels: Dashboard, Zone Plan, NMS Monitor, NMS

Settings, Local Network, Local Settings & Toolbox.

Dashboard

The Dashboard panel displays an overview of your network and key system

information, with quick links to access configuration options for Managed APs

and Managed AP groups. Each panel can be refreshed, collapsed or moved

according to your preference.

Zone Plan

Zone Plan displays a customizable live map of Managed APs for a visual

representation of your network coverage. Each AP icon can be moved around

the map, and a background image can be uploaded for user-defined location

profiles using NMS Settings Zone Edit. Options can be configured using the

menu on the right side and signal strength is displayed for each AP.

NMS Monitor

The NMS Monitor panel provides more detailed monitoring information

about the AP Array than found on the Dashboard, grouped according to

categories in the menu down the left side.

NMS Settings

NMS Settings provides extensive configuration options for the AP Array. You

can manage each access point, assign access points into groups, manage

WLAN, RADIUS as well as upgrade firmware across multiple access points. The

Zone Plan can also be configured using “Zone Edit”.

Local Network

Local Network settings are for your AP Controller. You can configure the IP

address and DHCP server of the AP Controller in addition to 2.4GHz & 5Ghz

Wi-Fi and security, with WPS, RADIUS server, MAC filtering and WMM settings

also available.

Andere Handbücher für WAP-EN1750W

Inhaltsverzeichnis

Andere Comtrend Corporation Drahtloser Zugangspunkt Handbücher

Comtrend Corporation

Comtrend Corporation WAP-5940 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-EN1750W Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-EN1750R Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-PC1750W Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-EN300C Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-EN1200C Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-EN1750R Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation GMK4500 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-60AX Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WLC-6404 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-PC1750W Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-EN900R Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-EN1200 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-EN1750C Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-EN1200E Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung