Comtrend Corporation CT-5365 Bedienungsanleitung

CT-5365

ADSL2+ Wireless Router

Quick start Guide

Version Eng-0, July 14, 2009

260094-002

Preface

This manual provides information related to quick start guide of this device. The

individual reading this manual is presumed to have a basic understanding of

telecommunications terminology and concepts.

If you find the product to be inoperable or malfunctioning, please contact technical

support for immediate service by email at INT-supp[email protected]

For product update, new product release, manual revision, or software upgrades,

please visit our website at http://www.comtrend.com

Important Safety Instructions

With reference to unpacking, installation, use, and maintenance of your electronic

device, the following basic guidelines are recommended:

Do not use or install this product near water, to avoid fire or shock hazard. For

example, near a bathtub, kitchen sink or laundry tub, or near a swimming pool.

Also, do not expose the equipment to rain or damp areas (e.g. a wet basement).

Do not connect the power supply cord on elevated surfaces. Allow it to lie freely.

There should be no obstructions in its path and no heavy items should be placed

on the cord. In addition, do not walk on, step on, or mistreat the cord.

Use only the power cord and adapter that are shipped with this device.

To safeguard the equipment against overheating, make sure that all openings in

the unit that offer exposure to air are not blocked.

Avoid using a telephone (other than a cordless type) during an electrical storm.

There may be a remote risk of electric shock from lightening. Also, do not use

the telephone to report a gas leak in the vicinity of the leak.

Never install telephone wiring during stormy weather conditions.

CAUTION:

To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line

cord.

Always disconnect all telephone lines from the wall outlet before servicing or

disassembling this equipment.

WARNING

Disconnect the power line from the device before servicing.

Power supply specifications are clearly stated in Appendix C of User Guide.

contained herein is proprietary to Comtrend Corporation. No part of this document

may be translated, transcribed, reproduced, in any form, or by any means without

prior written consent of Comtrend Corporation.

NOTE: This document is subject to change without notice.

Protect Our Environment

This symbol indicates that when the equipment has reached the end of its

useful life, it must be taken to a recycling centre and processed separate

from domestic waste.

The cardboard box, the plastic contained in the packaging, and the parts that make

up this router can be recycled in accordance with regionally established regulations.

Never dispose of this electronic equipment along with your household waste. You

may be subject to penalties or sanctions under the law. Instead, ask for disposal

instructions from your municipal government.

Table of Contents

CHAPTER 1 SUMMARY .....................................................................................................................4

CHAPTER 2 CHANGE PASSWORD..................................................................................................5

2.1 PASSWORDS.....................................................................................................................................5

2.2 DEFAULT SETTINGS .........................................................................................................................5

CHAPTER 3 ROUTER’S CONFIGURATION...................................................................................6

3.1 DYNAMIC MULTI-CONFIGURATION...................................................................................................6

3.1.1 Setup WAN port using manual setup.................................................................................6

3.1.2 Setup LAN port .................................................................................................................9

3.1.3 Setup Access control.......................................................................................................11

3.2 STATIC MULTI-CONFIGURATION......................................................................................................12

3.2.1 Setup WAN port using Quick Setup.................................................................................12

3.2.2 Setup Access control.......................................................................................................17

3.3 SINGLE DYNAMIC CONFIGURATION (BRIDGING).............................................................................19

3.3.1 Setup WAN port...............................................................................................................19

3.3.2 Setup LAN port ...............................................................................................................21

3.3.3 Setup Access control.......................................................................................................22

3.4 SINGLE STATIC CONFIGURATION (IPOA) ........................................................................................24

3.4.1 Setup WAN port...............................................................................................................24

3.4.2 Setup LAN port ...............................................................................................................27

3.4.3 Setup Access control.......................................................................................................28

3.5 NAT ..............................................................................................................................................30

3.5.1 Virtual Servers................................................................................................................30

3.6 WIRELESS......................................................................................................................................32

3.6.1 Basic ...............................................................................................................................32

3.6.2 Security...........................................................................................................................33

3.6.3 MAC Filter......................................................................................................................39

3.6.4 Advanced ........................................................................................................................40

3.6.5 Station Info......................................................................................................................43

3.7 UPDATE SOFTWARE .......................................................................................................................43

3.8 SAVE AND REBOOT ........................................................................................................................44

Chapter 1 Summary

Comtrend’s CT-5365 is an 802.11g (54Mbps) Wireless and Wired ADSL2+ Router. It

comes equipped with four 10/100 Base-T Ethernet ports and an ADSL2+ port for

wired connectivity. An integrated 802.11g WLAN Access Point (AP) with Wi-Fi

Protected Setup (WPS) provides wireless coverage.

To setup the ADSL service that provides Telefónica, it is recommended to follow the

instructions in the User Manual that came with the kit.

This guide complements the manual explaining how to use router’s web configurator

rather than using the setup Wizard included in the kit for the Microsoft Windows SO.

We recommended using the Telefonica’s Wizard.

The CT-5365 contains state of the art security features, such as WPA data

encryption, Firewall and VPN pass through. This model supports up to 16

contiguous virtual connections allowing for multiple simultaneous Internet

connections. The front and back panels are TR-068 compliant, which means they

are color-coded for easy installation and use. These features make the CT-5365

especially suited to a home or small business environment.

NOTE: Before to use Manufacturer’s tool of this product and Telefonica’s tools, you

are informed that this procedure is a orientate procedure. Telefonica does not have

support regarding this document.

Chapter 2 Change password

This section describes how to access the device via the web user interface using an

Internet browser such as Microsoft Internet Explorer (version 5.0 and later).

2.1 Passwords

The Passwords option configures the user account access passwords for the device.

Access to the device is limited to the following user accounts:

1234 is to be used for local unrestricted access control.

Use the fields in the screen below to select a username and change its password.

Passwords must be 16 characters or less. Click Save/Apply to continue.

2.2 Default Settings

The following are the default settings for the device.

Local (LAN) access (username: 1234 , password: 1234)

LAN IP address: 192.168.1.1 - Subnet Mask: 255.255.255.0

DHCP server on LAN interface: enabled

Chapter 3 Router’s configuration

After login, the Quick Setup screen will appear. It is the default screen when no

connections exist. It allows for the configuration of DSL and IP settings.

3.1 Dynamic multi-configuration

3.1.1 Setup WAN port using manual setup

Follow these steps to configure the WAN interfaces.

STEP 1: To Add a new WAN connection, click the Add button.

Heading

Description

VPI/VCI

ATM VPI (0-255) / VCI (32-65535)

Con. ID

WAN connection ID number

Category

ATM service category

Service

Name of the WAN connection

Interface

Name of the interface for WAN

Protocol

Shows the connection type

IGMP

Shows enable or disable IGMP proxy

QoS

Shows if IP QoS is enabled or disabled

VlanId

VLAN ID is used for VLAN Tagging (IEEE 802.1Q)

State

Shows the connection state of the WAN connection

Remove

To remove a connection select the radio button in this column and

click the Remove button under the table.

Edit

Used to edit connections

STEP 2: Adjust the VPI/VCI settings for the connection you wish to establish.

Select Enable Quality Of Service if required. Click Next to continue.

STEP 3: Select PPP over Ethernet (PPPoE) and click Next. The following

screen appears. Enter the Username and Password and select the

connection options you wish. Review the descriptions below for more

details. Click Next to continue.

PPP Username / PPP Password

The PPP Username and the PPP password requirement are dependent on the

particular requirements of the service provider. A maximum of 256 characters is

allowed for the PPP user name and a maximum of 32 characters for PPP password.

PPPoE Service Name

For PPPoE service, PADI requests contain a service label. Some PPPoE servers (or

BRAS) of ISP check this service label to make a connection.

Dial on Demand

The device can be configured to disconnect if there is no activity for a period of time

by selecting this check box. When the checkbox is ticked, you must enter the

inactivity timeout period. The timeout period ranges from 1 to 4320 minutes.

PPP IP Extension

The PPP IP Extension is a special feature deployed by some service providers.

Unless your service provider specifically requires this setup, do not select it.

PPP IP Extension does the following:

Allows only one PC on the LAN

The public IP address assigned by the remote side using the PPP/IPCP

protocol is actually not used on the WAN PPP interface. Instead, it is

forwarded to the PC LAN interface through DHCP. Only one PC on the

LAN can be connected to the remote, since the DHCP server within the

device has only a single IP address to assign to a LAN device.

NAT and firewall are disabled when this option is selected.

The device becomes the default gateway and DNS server to the PC

through DHCP using the LAN interface IP address.

The device extends the IP subnet at the remote service provider to the

LAN PC. i.e. the PC becomes a host belonging to the same IP subnet.

The device bridges the IP packets between WAN and LAN ports, unless

the packet is addressed to the device’s LAN IP address.

Use Static IP Address

Unless your service provider specially requires this setup, do not select the

checkbox. If selected, enter the static IP address in the IP Address box.

Enable PPP Debug Mode

More PPP connection information will be listed in the System Log. This is used for

debugging. Please don't enable it for normal usage as it uses system resources.

STEP 4: This screen allows the user to control IGMP Multicast and WAN Service.

Enable IGMP Multicast checkbox:

Tick the checkbox to enable IGMP multicast (proxy). IGMP (Internet Group

Membership Protocol) is a protocol used by IP hosts to report their multicast group

memberships to any immediately neighboring multicast routers.

Enable WAN Service checkbox:

Tick this item to enable the ATM service. Untick it to stop the ATM service.

Service Name: This is the WAN Service label.

STEP 5: Click Next to display the WAN Setup - Summary screen that presents the

entire configuration summary. Click Back to modify the settings.

STEP 6: Click Save/Reboot to apply these settings. The configuration will be

saved to flash memory and then the device will reboot. After the device

reboots, the Web UI should refresh the browser window. If the browser

does not refresh, restart the browser and login again.

3.1.2 Setup LAN port

This screen allows the user to configure the LAN Interface on the device.

Andere Handbücher für CT-5365

Inhaltsverzeichnis

Andere Comtrend Corporation WLAN-Router Handbücher

Comtrend Corporation

Comtrend Corporation WR-6895 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WR-5887 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation NexusLink 3120 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation CT-535 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WR-5882 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation CT-5361 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation VR-303 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation VR-3030 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation CT-5365 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WR-5882 Montage- und Wartungsanleitung

Comtrend Corporation

Comtrend Corporation CT-5372E Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WR-5881 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation VG-8050 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation CT-5361T Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation WAP-5813n Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation AC 1200 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation CT-536+ Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation CT-5365 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation CT-535 Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation CT-6382T Bedienungsanleitung

Comtrend Corporation

Comtrend Corporation Wireless-N Broadband Router Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung