ComXim MT Series Bedienungsanleitung
MT series remote control intelligent turntable user guide
Copyright reserved by Shenzhen ComXim Technology Co., Ltd. 2017
1Revision Record
Table 1
Revision
times
Revision
times
Revised content
Version number
3
2017-11-05
1. Add new models
2.Add USB serial control and secondary
development guide
V1.2
2
2016-05-18
Modify and update part of the content
V1.1
1
2016-03-09
Release for the first time
V1.0
2 DataSheet and software download
2.1 Company Official Website
http://www.comxim.com/Download
User's manual and data download address (both in Chinese and English)
User manual download (Chinese and English)：
http://www.comxim.com/Download/ViewDoc?DocId=20160309_201840_1843
List of CT commands (in English and Chinese)：
http://www.comxim.com/Download/ViewDoc?DocId=20160625_165928_7350
Software download address: Android APP Download links：
http://www.comxim.com/Download/ViewDoc?DocId=20160312_160750_6071
Figure 1Android App QR code
IOS (iPhone) App Download method：
Search "Turntableplus" in the App Store then install
As shown below.：
Figure 2 Turntableplus app in the App store
PC Software (in Chinese and English)：
http://www.comxim.com/Download/ViewDoc?DocId=20170105_171355_7135
USB driver：
http://www.comxim.com/Download/ViewDoc?DocId=20170421_200914_0296
MT series remote control intelligent turntable user guide
Copyright reserved by Shenzhen ComXim Technology Co., Ltd. 2017
3 MT Series Turntable Model Naming rules, identification and main characteristics
MT
200
380
KL
RUWS
L20
L120
H
Series
name
Turntable
Model
code
Diameter
(cm)
Sub code
K: Adjusting knob
R: Remote control
U: USB interface
C: Serial port
B: Bluetooth
W: WIFI
S: Synchronized
shutter
Max Load
（Kg）
International
Identification:
H:International
Notes：
1. The numerical meaning of the main type code：The bigger the number, the longer the diameter is. e.g. MT320 stands for turntable diameter 320mm.
2. Letter meaning in sub model code：The letter represents a key function (the first letter of the English word for the function)，The letter in the model
name indicates that this model supports this function, Such as MT320RUWLxx indicates that this model supports remote control (R) +USB interface
(U) +WIFI (W) at the same time.
MT series remote control intelligent turntable user guide
Copyright reserved by Shenzhen ComXim Technology Co., Ltd. 2017
2
Table 2
Letter
Meaning
Functions
Application
A
A=AC alternating
current
AC motor turntable
With a AC motor，rotate by random direction while power on，Some models can
support control direction
K
K=Knob
Speed adjusted by knob
Adjust the speed of turntable by knob
R
R=Remote
Support controlled by
remote controller
Use remote controller to control the speed, direction angle and rotation mode
of the turntable
U
B= USB Interface
Support connected and
controlled via USB
The turntable could be connected with computer via USB cable, and controlled
with computer software(speed, direction, angle, pause time, rotation mode);
support secondary development with USB interface
C
C= COM Interface
（RS232）
Support connected and
controlled via serial port
(RS232)
The turntable could be connected with computer via serial port (RS232),and
controlled with computer software(speed, direction, angle, pause time, rotation
mode); support secondary development with USB interface
B
B= Bluetooth
Support connected and
controlled via Bluetooth
The turntable could be connected and controlled with smart phone or computer
via Bluetooth, and controlled with App or software(speed, direction, angle,
pause time, rotation mode); support Bluetooth secondary development
W
W= WIFI
Support connected and
controlled via WIFI
The turntable could be connected and controlled with smart phone or computer
viaWIFI, and controlled with App or software(speed, direction, angle, pause
time, rotation mode); WIFI Supports secondary development ,the turntable WIFI
is AP mode, WIFI direct connect and control
S
S= Shutter
Support synchronized
shutter
Support synchronized shutter, the turntable output shutter signal during
intermittent rotation，Intermittent angle and pause time could be set up by
software or APP, also supports secondary development
MT series remote control intelligent turntable user guide
Copyright reserved by Shenzhen ComXim Technology Co., Ltd. 2017
3
4 Infrared Remote Control Instructions
4.1 Remote Control Button Illustration
Figure 3 Remote Control Detailed
MT series remote control intelligent turntable user guide
Copyright reserved by Shenzhen ComXim Technology Co., Ltd. 2017
4
4.2 Key function description supplement
To store key，The rotating parameters of the turntable are stored in the internal Flash for the next use，the
same is true for Windows PC or Android App software，The parameters stored in the turntable are not the
parameters seen on the Windows PC or Android App interface.
The infrared remote controller can not modify the pause time, if you need to modify, through the Windows
PC or Android App software.
The automatic shutter, rotation angle, pause time, repeat times could only be set in intermittent rotation
mode, and invalid in continuous rotation mode.
MTxxxRUWSand above models，If the automatic shutter parameter is on, the first shutter is paused and
rotated after intermittent rotation.
5 Windows PC Software usage instructions（The model contains letters
“U”、“C”、“W”、“B”）
5.1 Function overview
Using software and APP to control the turntable，Its function fully includes all functions of infrared remote
controller，And more powerful than infrared remote control, more flexible control, Mainly manifested in：
The intermittent rotation parameters （Rotation angle, intermission time, repetition frequency and
automatic shutter）It can be set freely. The infrared remote controller can only be limited。
The software is connected with the rotary disc，The infrared remote controller can be shielded to realize the
exclusive control of the turntable，The function is to prevent the infrared remote controller from
misoperation or interference to the turntable。
To support the swing mode
To support complex actions of other user defined
5.2 Software using steps
5.2.1 Installation control software
Download Turntable X.exe（Users can download Turntable X software in 2 ways，Turntable X is Free installation,
you can create shortcuts directly on the desktop），Turntable X Support WIFI, Bluetooth, USB, COM port and
other control turntable from ComXim Company,.
MT series remote control intelligent turntable user guide
Copyright reserved by Shenzhen ComXim Technology Co., Ltd. 2017
5
Figure4 TurntableX Software icon
5.2.2 Computer and turntable with WIFI version connection（Product support with "W"
in the name of the model）
Taking the following Windows PC software to connect MT200RUWSL10 devices as an example,
Introduce the steps of software application.
Attention：If you are using this software for the first time, or have not installed the WIFI driver, please
install the driver first. If the computer does not have a WIFI network card and the purchase device is not
equipped with the USB WIFI network card, please ensure that you have the WIFI network card and then
use the MTxxxW series turntable.
The following introduces how to use WIFI to control MTxxxW series turntable in Windows environment.
Insert the USB WIFI network card into the computer USB interface (using the built-in WIFI network card) and
install the driver according to the requirements。Electrify the WIFI turntable of MTxxxW series or other series of
ComXim company.（Explain：The computer comes with WIFI card, if you don't use the network card, you can also
use the computer to bring your own WIFI network card, if you connect the turntable, you need to use the WIFI
network, should have dual WIFI network card）。
First Step: Find WIFI hotspots
As shown in the diagram below, when the WIFI works properly, the turntable turns on power for 10 seconds，
Click on the network connection icon in the lower right corner of Windows，You can see the software search
"MT200RUWSL10", if the target device is not found, click on the icon ( ) to refresh.
MT series remote control intelligent turntable user guide
Copyright reserved by Shenzhen ComXim Technology Co., Ltd. 2017
6
Figure 5 find the hotspot of turntable WIFI
Second Step: Connect WIFI hotspot
In the WIFI devices found on the disk, click the right mouse button in the pop-up connection, connect to the
network dialog box, enter the WIFI disk connection security key "88889999", and then press the OK button.
Figure 6 Right click turntable hotspot
MT series remote control intelligent turntable user guide
Copyright reserved by Shenzhen ComXim Technology Co., Ltd. 2017
7
Figure 7 Input password
Third Step: Connect the computer and the turntable via WIFI
Figure 8 Connected
First Step : Using Turntable X software to connect WIFI with turntable
Open the Turntable X software, select the Ipv4, click the connection button to connect the turntable, the
software has the default connection IP address input, without modifying (unless the customer service
confirmation IP address changes), click directly on the connection.
MT series remote control intelligent turntable user guide
Copyright reserved by Shenzhen ComXim Technology Co., Ltd. 2017
8
Figure 9 Use IP address to connect turntable (need turntable to support WIFI)
5.2.3 Computer and USB or serial version turntable connection（The product name is
"U" or "C" in the model name）
First Step :Download and install the USB driver
PC End USB driver download address：
http://www.comxim.com/Download/ViewDoc?DocId=20170421_200914_0296
After the first step download, double-click the running program and click Install (wait about 1-2 minutes to
display the installation)，As follows Figure 10
MT series remote control intelligent turntable user guide
Copyright reserved by Shenzhen ComXim Technology Co., Ltd. 2017
9
Figure 10 Install USB Driver
Install the drive, power the turntable, connect the turntable and the computer with the USB line, open
the device manager, and see a multiple COM interface on the port. This is the USB port of the COM
corresponding to the turntable.
Figure 11 Port of USB interface turntable
Second Step : Using Turntable X software to connect USB turntable
Open TurntableX software，Select the COM option showed on Figure 12, select the port corresponding to the
turntable in the drop-down menu, and click the connection turntable.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere ComXim Drehscheibe Handbücher
