Inflatable
Air Bladder
Hose
Electric
Air Motor
Hand Held
Remote
Slide mattress 2 feet toward the foot of the
bed
Place air bladder at head of bed and slide
mattress over it
RED DOT disappears when
in locked & sealed position
1. Place Bladder on the Bed
Slide mattress about 2 feet toward
foot of the bed.
Place air bladder at head of bed
and slide mattress on top of it.
Press |for power on
Press 0 for power o
When the Mattress Genie is turned
on, you can use the hand held
remote to easily adjust the angle
of elevation.
UP - Hold button down to inflate the
air bladder.
DOWN - Hold button down to
deflate the air bladder.
FLAT - Press button once to
completely to deflate your air bladder.
Do not press any other button or it will
cancel the deflation.
The flat button starts a 2 minute timer to
open the valve in the motor to allow air
to escape and deflate the unit.
Note: You will not hear any motor noise
when deflating.
3. Power Mattress Genie On
Plug the black power cord into a
dedicated wall outlet.
Turn the black power button on
the motor to the “on” position.
2. Attach and Connect Hose
Attach hose to the electric air
motor.
Turn hose connector 90 degrees
clockwise until the red dot is no
longer visible.
Scan QR or visit www.contourliving.com/
mattress-genie-adjustable-wedge/
for tips to set up and to achieve the most out
of elevated sleep & relaxation.
HOW TO SET UP YOUR MATTRESS GENIE
USING YOUR MATTRESS GENIE HAND
HELD REMOTE
Reach out to our Customer Care Team if you have
any questions or concerns.
Phone:
800-950-0230 or 704-944-2800
Email:
customerserv@contourliving.com
Oce & Live Chat Hours:
Mon. - Fri., 8:30 am - 5:00 pm ET Visit contourliving.com
& click “chat now”
C0132_2022-03-29
NEED HELP? CONTACT US!
