Contura C 35T-Low Bedienungsanleitung

www.contura.eu

Installation

instruction

C 35T-Low

CERTIFICATE

PRODUCT

Product type Stove lit with solid biofuels

Type designation Contura 35TL

Manufacturing number See rating plate on the stove

Intended area of use Heating of rooms in residential buildings

Fuel Wood

MANUFACTURER

Name NIBE AB / Contura

Address Box 134, Skulptörvägen 10

SE-285 23 Markaryd, Sweden

CHECKS

According to AVCP System 3

European standard EN 13240:2001 / A2:2004

Test institute Rein-Ruhr Feuerstätten Prüfstelle, NB 1625,

has checked declared performance and issued test report no. RRF-40 09 1955

PERFORMANCE DECLARATION

No. C35TL-CPR-130618-SE-1

DECLARED PERFORMANCE

Essential characteristics Performance Harmonised technical

speciﬁcation

Reaction to fire A1 WT

Minimum distance to combustible material 100 mm to rear

415 mm to side

Other safety distances according to

the installation instructions

Risk of falling embers Approved

Emissions from combustion CO 0.05%

NOx 106 mg/m3

OGC 53 mg/m3

PM 27 mg/m3

Surface temperatures Approved

Cleaning options Approved

Mechanical durability Approved

Emissions of hazardous substances Approved

Nominal output 5 kW

Efficiency 80%

Flue gas temperature in connector at nominal

output

300°C

EN 13240:2001 / A2:2004

The undersigned is responsible for the manufacture and conformity with the declared performance.

Niklas Gunnarsson, Business area manager NIBE STOVES

Markaryd, 1st July 2013

List of Contents

Technical details 84

Installation distance to walls and ceiling 85

Supply of combustion air 86

Connection to chimney 88

Installation of surround 90

A warm welcome to Contura.

A warm welcome to the Contura family. We hope you

will get a great deal of pleasure from your new stove.

As a new owner of a Contura stove, you have secured

a product with timeless design and long service life.

Contura also has a combustion process that is both

environmentally friendly and efficient, for the best heat

production.

Read through these installation instructions carefully

before installation. Read how to best light your stove

in the lighting instructions.

NOTE:

Report the installation of a stove to your

local authority.

The owner of the house is personally responsible

for ensuring compliance with the mandatory safety

requirements and must have the installation approved

by a qualified inspector. Your local chimney sweep must

also be informed of the installation, as this will affect the

routines for regular chimney-sweeping services.

WARNING!

The stove becomes very hot

During operation, certain surfaces of the stove become

very hot and can cause burn injuries if touched. Also,

take heed of the strong heat radiated through the door

glass. Placing flammable material closer than the safe

distance indicated may cause a fire. Smoulder combustion

can cause quick gas ignition with the risk of damage to

property and personal injury.

CONTENTS

Eldstadsbeklädnad

Rosterreglage Asklåda

Förbränningsluftsreglage

Brasbegränsare

Effect 3-7 kW

Nominal effect 5 kW

Efficiency 80 %

Model C35TL

Weight (kg) 188

Width (mm) 550

Depth (mm) 430

Height (mm) 1100

Installation by authorised

technician

This manual contains instructions on

how the stoves must be assembled and

installed. To ensure the function and

safety of the stove, we recommend that

the installation be carried out by an

authorised technician. Contact one of

our dealers who can recommend suitable

fitters.

Building permission

Before installing a stove or erecting a

chimney, it is necessary for you to make

an application for building permission

to your local authority. Ask your local

authority for advice regarding building

regulations and the application.

Structural support

Check that the wood joists are strong

enough to bear the weight of the stove

and chimney. The stove and chimney can

usually be placed on a normal wooden

joist in a single occupancy house, if the

total weight does not exceed 400 kg.

Hearth plate

Due to the risk of embers falling out, a

flammable floor must be protected by

a hearth plate. It must extend 300 mm

in front of the stove and 100 mm on

each side of the stove, or have a 200 mm

extension on each side of the opening.

The hearth plate can consist of natural

stone, concrete, metal plate or glass.

A painted metal or glass hearth plate

is available as an accessory for these

models.

Important to remember!Technical details

Type approved in accordance with:

European standard EN-13240

Swedish type approval,

P-marking cert. no. 0112/07

Norwegian standard NS 3059,

SINTEF 110-0275

German standard DIN Plus,

RRF-40 09 1955

FACTS

Fire bars

Hearth cladding

Grate control

Combustion air control

Ash-pan

C 35TL

Installation distance to walls and ceiling

*To prevent discolouration of painted fire walls, we recommend the same side distance as to combustible walls.

INSTALLATION DISTANCES

The minimum distance in front of

the stove opening to combustible

parts of the building or interior

decoration must be at least 1 m.

The dimension diagrams only

show the minimum permitted

installation distances for the

stove. When connecting to a steel

flue, also note the safety distance

requirements of the flue. The

safety distance between an un-

insulated flue and a combustible

part of the building should be at

least 300 mm.

368

150

729

781

Combustible wall

267

100

415

435

690

Combustible wall

Permitted area for

combustible parts

of the building

268

629

900

640

Fire-retardant wall of

brick or concrete

217

700

1100

50*

325*

Fire-retardant wall of

brick or concrete

550

1100

min 2100

105

220

Air inlet Ø64

Combustible roof

430

355

975

1065

167

120 Hole in foot plate Ø120

HK HK

40 mm

Combustion air can be provided directly via a duct from outside,

or indirectly via a vent in the outer wall of the room where the

stove is placed. The amount of combustion air that is used for

combustion is approx. 20 m3/h.

Outside air can be connected through the floor plate or at two

different heights through the two panels in the back of the stove.

Tap out the knockout using a hammer. The air duct connector on

the stove has an external diameter of Ø64 mm.

In hot areas, the duct has to be insulated with 30 mm mineral wool

covered with a moisture barrier (plastic). It is important that the

lead-in, between the pipe and the wall (or floor), is sealed using

jointing compound. When duct routing for further than 1 m, the

pipe diameter must be increased to 100 mm and a correspondingly

larger wall vent must be selected.

A 1 m length of condensation-insulated ducting for combustion air

is available as an accessory.

SUPPLY AIR/ACCESSORY

Supply of combustion air

Self-closing door

The stove is equipped with a spring to close the door

automatically. The spring is situated above the heat deflector.

The closing force of the hatch can be adjusted by moving the

spring between the three notches on the lever. The angle of the

stove also affects the closing force of the spring.

If the spring force seems weak, despite the spring being

mounted at the end of the lever, the angle of the stove

should be checked. Adjust with adjustable feet if necessary.

SUPPLY AIR/ACCESSORY

Ø ca 180 mm

Rear connection to a masonry chimney

The back panel must be installed before the stove is connected at

the rear.

Connection to chimney

Make sure that the connector

gasket does not come loose when

the connection pipe is placed on the

sleeve. If further sealing material is

required, heat-resistant sealant may

be used.

• The stove meets the requirements for connecting to chimneys

dimensioned for flue gas temperatures of 350°C.

• The external diameter of the connection sleeve is 150 mm.

• The stove requires a draft in the chimney of at least –12

Pa. The draft is affected both by the length and area of

the chimney, and by how well sealed it is. The minimum

recommended chimney length is 3.5 m and suitable cross-

sectional area is 150-200 cm² (140-160 mm in diameter).

• A flue with sharp bends and horizontal routing reduces the

draught in the chimney. The maximum horizontal flue is 1 m,

on the condition that the vertical flue length is at least 5 m.

• It must be possible to sweep the full length of the flue and the

soot doors must be easily accessible.

• Carefully check that the chimney is sealed and that there is no

leakage around soot doors and flue connections.

CHIMNEY

In the bag with these installation instructions

are two wing screws for the cover.

Top connection to the chimney

The hot air grille must be installed before the chimney is

connected to the top.

Connection to chimney

Sweeping

When sweeping, the smoke baffle must be removed; on the

Contura 30 series this can be done by lifting the smoke baffle

and removing the side piece. Lift the smoke baffle out and

remove the remaining sections. Handle the parts with care.

CHIMNEY

1 2

803280

(H=41)

803294

(H=351)

803296

(H=351)

803313

(H=392)

803312

(H=392)

803025

(H=343)

803023

(H=343)

603652

(H=351)

803349

(H=392)

803027

(H=343)

Installation of surround

INSTALLATION

Do not tighten the screws.

Take care of the soapstones!

They scratch easily and are easily stained by

grease. Small grease marks can be removed

with pure acetone.

The stones are numbered as illustrated above. We recommend that

the stones be installed in the order described on the following pages.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Contura Holzofen Handbücher

Contura

Contura C 450T Bedienungsanleitung

Contura

Contura C 780 Bedienungsanleitung

Contura

Contura C 790K Bedienungsanleitung

Contura

Contura C 26K Low Bedienungsanleitung

Contura

Contura 650 Bedienungsanleitung

Contura

Contura C 850 Bedienungsanleitung

Contura

Contura C330G Bedienungsanleitung

Contura

Contura C i5AN Bedienungsanleitung

Contura

Contura C 685 Bedienungsanleitung

Contura

Contura C 586W Bedienungsanleitung

Contura

Contura 560T Bedienungsanleitung

Contura

Contura C 556 Bedienungsanleitung

Contura

Contura Turntable C500 Bedienungsanleitung

Contura

Contura 550 Bedienungsanleitung

Contura

Contura C 34T Bedienungsanleitung

Contura

Contura 510 Bedienungsanleitung

Contura

Contura C i4 FS Bedienungsanleitung

Contura

Contura C 660K Bedienungsanleitung

Contura

Contura 510 Bedienungsanleitung

Contura

Contura C i31 Bedienungsanleitung

Contura

Contura C600 Style Series Bedienungsanleitung

Beliebte Holzofen Handbücher anderer Marken

Plamen

Plamen ECO MINIMAL 50 Bedienungsanleitung

RAIS

RAIS 800 Bedienungsanleitung

Henley

Henley Arklow Bedienungsanleitung

Jøtul

Jøtul F 500 Bedienungsanleitung

Englander

Englander BLUE RIDGE 100 Bedienungsanleitung

WoodPro

WoodPro WS-TS-1500 Bedienungsanleitung

Nordpeis

Nordpeis N-20 T Bedienungsanleitung

Palazzetti

Palazzetti EVA Konfigurationshandbuch

Lopi

Lopi 1250 Republic Bedienungsanleitung

Panadero

Panadero CAPRI 3V Programmierhandbuch

RAIS

RAIS RONDO 92 Bedienungsanleitung

RAIS

RAIS attika NEXO 100 GAS Bedienungsanleitung

ADURO

ADURO 15-3 Benutzerhandbuch

Pacific energy

Pacific energy SUPER 27 SPECTRUM Bedienungsanleitung

Avalon

Avalon Olympic 11190 Bedienungsanleitung

Ventis

Ventis HES350 Bedienungsanleitung

IronStrike

IronStrike Striker S160GL Bedienungsanleitung

EdilKamin

EdilKamin LOGO Kurzanleitung