COOLSTUFF KitchPro Bedienungsanleitung

Ice crusher

Instruction manual

Read the instruction carefully before using your appliance for the first time.

Specifications

Name

Ice crusher

Rated time

1 minute

Size

100x130x285MM

(including base)

Weight

about 0.8kg

Voltage

AC 220-240V

Power

30W

Rated frequency

50Hz/60Hz

Safety instruction

1. Before using the appliance, please read this Safety Instruction carefully.

2. Comply with the safety precautions.

3. Please save this instructional manual after the first application.

4. Appliances can be used by persons with reduced physical, sensitive or mental capabilities or lack of

experience and knowledge, if they have been given supervision or instruction concerning use of the

appliance in a safe way and if they understand the hazards involved.

5. Children shall not play with the appliance.

6. Switch off the appliance and disconnect it from power supply before changing accessories or

approaching moving parts in use.

7. Always disconnect the appliance form the power supply if it is left unattended and before

assembling, disassembling, or cleaning.

8. This appliance shall not be used by children. Keep the appliance and its cord out of reach of

children.

9. Misuse of this appliance may lead to potential injury

10. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similar qualified person to avoid a hazard.

11. Care shall be taken when handling the sharp cutting blades, emptying the bowl and cleaning the

appliance.

12. Be careful if hot liquid is poured into the appliance, as it can be ejected out of the appliance due

to sudden steaming.

1) power cord

2) power plug

3) ON/OFF switch button

4) Main body

5) ice press plate

6) spike

7) ice box

8) inner ring

(The ice amount can not exceed the height of

the inner ring)

9) ice position

10) outlet

11) base

(1)

(2)

(4)

(3)

(5)

(6)

(7)

(8)

(9)

(10)

(11)

Correct Usage

⚫Do not use it on the dining table or similar

places.

⚫Prevent the child from using this appliance,

and keep it away from the children’s reach.

⚫Do not connect the plug before inserting the

main body into the ice box.

1. Take the main body out from the ice box.

◆Please put the product on flat surface

hold the ice box firmly with one hand, and rotate the

main body clockwise with another hand, to coincide with mark and ▲.

2. Put the ice cubes into the ice box.

◆Put the ice cubes from the ice making device on the market

into the ice box, and make sure the ice cubes are under the maximum

line of ice box.

⚫Make sure the top surface of ice cubes are

flat, then connect ice box with main body. If

the amount of ice cubes is over the maximum

line or the top surface of the ice cube is not

flat, it can’t be closed.

⚫Do not use the rock ice sold in the

supermarkets or convenience stores.

3. Connect the ice box with the main body.

◆First of all, make sure that the ice box is assembled on the base

completely.

◆As shown in the right picture: hold the ice box tightly by one hand,

then press the main body hardly with another hand and make sure the

mark ▲fit with coincidentally, rotate the main body

counterclockwise to the position of mark , until hearing the

sound of “click”, and it means it is installed in place.

ice box

ice position

※If the amount of ice cubes is over the maximum position or the top surface of

ice cubes is not flat, it can’t be closed.

※Do not be blocked by the inner reinforcing rib when

assembling the main body with ice box.

4. Please insert the plug into the socket.

5. Shave ice

◆Hold the main body and ice box tightly with two hands,

slowly lift it and press the switch button during lifting.

※The base is not needed when lifting the appliance for using.

◆The appliance will not work without pressing the switch button.

※Even if there is no ice cube in the ice box, the appliance will not

stop working when you press the switch button, so do not forget

to release the switch button when there is no ice cube in ice box.

Possible phenomena during shaving

◆When the ice is stuck, you will hear a locking sound.

Please stop working. This is a normal phenomenon,

which is not fault.

◆With the reduction of ice cubes, the side of ice cubes touching

the blade will become smooth, and the shaving amount will decrease.

Solutions:

No matter what has happened, please turn off the switch and

start it again. If the problem still can’t be solved,

please take the ice box away from the main body, shake the

ice box, reduce the amount of ice cubes, and then

switch on after re-assembly.

⚫It is dangerous to touch plug with wet hand,

and make sure that your hands are dry before

touching the plug.

inner

reinforcingrib

ON/OFFswitch

6. Remove the main body, throw the ice cube way.

※Because of the structure, it is a normal phenomenon that there might be residual ice cubes in

the box, which is not fault.

Make sure to throw the residual ice cubes away for the next application.

If there are residual ice cubes in the ice box, and you continue adding ice cubes, it will cause idling.

⚫Please pull out the plug after using.

⚫Sometimes, the water attaching to the main body will fall,

please put the main body on the cloth to absorb the moisture.

⚫Do not reverse the main body.

⚫During continuous shaving of ice, please make sure a minimum

interval of 30 seconds.

Cleaning and storage

1. Make sure to pull out the plug.

2. Put the appliance on the bottom base.

3. Remove the main body from the ice box.

◆Put the appliance on a flat surface, hold the ice box tightly with one hand, and rotate the main

body clockwise with another hand.

◆Wipe the main body, ice press plate and spikes with dry cloth. Pour the neutral lotion onto the

cloth, dry it gently, and wipe the hard dirt.

◆Please store the appliance in dry condition.

4. Invert the ice box after cleaning, until moisture is dry. Make sure to keep the blade dry.

5. Don’t touch the spikes and blades with hands during cleaning.

6. Don’t soak the appliance into the water or pour water on it, it may cause electric shock.

7. It may rust or mildew if the appliance is not used for a long time, and you could smear edible oil

on the blade and store it after complete drying.

Environment

Meaning of crossed –out wheeled dustbin:

Do not dispose of electrical appliances as unsorted municipal waste, use separate

collection facilities. Contact your local government for information regarding the

collection systems available. If electrical appliances are disposed of in landfills or

dumps, hazardous substances can leak into the groundwater and get into the

food chain, damaging your health and well-being. When replacing old appliances

with new ones, the retailer is legally obligated to take back your old appliance for

disposals at least free of charge.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere COOLSTUFF Küchengerät Handbücher

COOLSTUFF

COOLSTUFF KitchPRO SW-227D Bedienungsanleitung

Beliebte Küchengerät Handbücher anderer Marken

Tayama

Tayama TYG-35AF Bedienungsanleitung

AEG

AEG 43172V-MN Bedienungsanleitung

REBER

REBER Professional 40 Benutzerhandbuch

North American

North American BB12482G / TR-F-04-B-NCT-1 Bedienungsanleitung

Presto

Presto fountain popper Bedienungsanleitung

Westmark

Westmark 1035 2260 Bedienungsanleitung

Zanussi

Zanussi ZCG64396XA Bedienungsanleitung

HOFFEN

HOFFEN SM-9302M Bedienungsanleitung

Philips

Philips HD3133 Bedienungsanleitung

Ronco

Ronco Beef Jerky Bedienungsanleitung

Hendi

Hendi 470411 Bedienungsanleitung

Livoo

Livoo MEN386 Bedienungsanleitung

Vogue

Vogue D446 Bedienungsanleitung

croydon

croydon WR-10313-700 Bedienungsanleitung

ADE

ADE AUTOMATIC-L Bedienungsanleitung

Chefman

Chefman RJ43-SQ Series Bedienungsanleitung

Vacmaster

Vacmaster VP680 Bedienungsanleitung

Jetmaster

Jetmaster 900HG Bedienungsanleitung