Cooper Lighting INVUE IMI-606 Bedienungsanleitung

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible

contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please

contact your nearest representative.

1. Open the Door -

Press both BUTTON LATCHES at the same time and open the door.

See Figure 1.

2. Reflector Removal -

Press the two REFLECTOR TABS outward and

swing the REFLECTOR down.

See Figure 2a and Figure 2b.

NOTE: Disconnect REFLECTOR CONNECTOR from

the HOUSING as shown in Figure 2c.

Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269 IMI-606 AVU040954

Mast Arm Adapter

Sheet 1 of 5

5/26/04 IMI-606

INSTALLATION INSTRUCTIONS

IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.

RETAIN FOR FUTURE REFERENCE.

General: Upon receipt of fixture thoroughly inspect for any

freight damage, which should be brought to the attention of

the delivery carrier. Compare the catalog description listed

on the packing slip with the fixture label on the housing to

assure you have received the correct merchandise.

Safety: This fixture must be wired in accordance with

the national electrical code and applicable local codes

and ordinance. Proper grounding is required to insure

personal safety. Carefully observe grounding procedure.

All work should be done by an electrician.

WARNING: Risk of Electric Shock. Disconnect power at circuit breaker panel or

fuse box before installing or servicing.

Button Latches

Push to Open

Reflector Tabs

Fig. 1

Fig. 2a

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible

contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please

contact your nearest representative.

3. Power Supply Tray Removal -

Unscrew the two THUMB SCREWS and swing the POWER SUPPLY TRAY down as shown in Figure 3a. Disconnect the POWER

CONNECTOR and the OPTIC CONNECTOR from HOUSING. See Figure 3b. The POWER SUPPLY TRAY can now be lifted off the

bracket.

Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269 IMI-606 AVU040954

Mast Arm Adapter

Sheet 2 of 5

5/26/04 IMI-606

INSTALLATION INSTRUCTIONS

IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.

RETAIN FOR FUTURE REFERENCE.

WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing

or servicing.

Power Supply

Tray

Thumb Screws

Reflector

Connector

Reflector Tabs Reflector

Fig. 2b Fig. 2c

Power Connector

Optic Connector

Fig. 3a Fig. 3b

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible

contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please

contact your nearest representative.

4. Attach Housing to Mast Arm Adapter -

Remove the WIREWAY PLUG from the

HOUSING. Move the fixture leads aside so

the THREADED RODS may be accessed

through the fixture HOUSING.

See Figure 4a.

Attach the MAST ARM ADAPTER to the

HOUSING by inserting the threaded studs

into the fixture HOUSING. Feed the fixture

wires through the MAST ARM ADAPTER.

Slide the HOUSING over the threaded

rods and secure it with the PLAIN

WASHERS, LOCK WASHERS, and HEX

NUTS. See Figure 4b.

Torque HEX NUTS as follows:

Medium Icon (ICM) - 450 in-lbs.,

Small Icon (ICS) - 130 in-lbs.

NOTE: It may be helpful to use a deep

socket when installing the HEX NUTS.

Re-install the WIREWAY PLUG into the

wireway in the HOUSING.

Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269 IMI-606 AVU040954

Mast Arm Adapter

Sheet 3 of 5

5/26/04 IMI-606

INSTALLATION INSTRUCTIONS

IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.

RETAIN FOR FUTURE REFERENCE.

WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing

or servicing.

WARNING

Risk of Personal Injury

Fixture may become damaged and/or

unstable if not installed properly

Tighten all fixture components to their

recommended torque values

Wireway Plug

Fig. 4a

Fig. 4b

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible

contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please

contact your nearest representative.

5. Slip the Assembly over the mast arm. Secure Mast Arm Adapter to the mast arm with the four (4) 3/8-16x3/8 Set Screws. Drill a

3/8”hole through the mast arm and install the 3/8”carriage bolt and nut. Use care in drilling hole so as not to damage electrical wires

in the mast arm. Make electrical connections in the Mast Arm Adapter. Install the wire way door with two (2) 6-32x3/8 screws.

See Figure 5.

Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269 IMI-606 AVU040954

Mast Arm Adapter

Sheet 4 of 5

5/26/04 IMI-606

INSTALLATION INSTRUCTIONS

IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.

RETAIN FOR FUTURE REFERENCE.

WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing

or servicing.

Fig. 5

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible

contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please

contact your nearest representative.

6. Buttoning Up -

Re-install the POWER SUPPLY TRAY to the HOUSING. Connect the POWER CONNECTOR and OPTIC CONNECTOR. Swing

the POWER SUPPLY TRAY up and tighten the two THUMB SCREWS. Re-install the REFLECTOR to the HOUSING. Connect the

REFLECTOR CONNECTOR to the HOUSING. Swing the REFLECTOR up until it is secured by the REFLECTOR TABS. You

will hear an audible “click”when the REFLECTOR TABS have properly engaged. Close the fixture DOOR. See Figure 6. You will

hear two audible “clicks”when the two BUTTON LATCHES are properly engaged.

Re-lamping the Fixture

Disconnect the power to the fixture. Open the DOOR by pressing both BUTTON LATCHES at the same time. Remove the lamp

by grasping it close to the base and install the new lamp. Close the fixture DOOR. You will hear two audible “clicks”when the two

BUTTON LATCHES are properly engaged.

Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269 IMI-606 AVU040954

Mast Arm Adapter

Sheet 5 of 5

5/26/04 IMI-606

INSTALLATION INSTRUCTIONS

IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.

RETAIN FOR FUTURE REFERENCE.

WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing

or servicing.

Reflector

Power Supply Tray

Outer Door

Fig. 6

Inhaltsverzeichnis

Andere Cooper Lighting Inneneinrichtung Handbücher

Cooper Lighting

Cooper Lighting Shaper 601V-48 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Sure-Lites CAX Series Bedienungsanleitung

Cooper Lighting

Cooper Lighting IRiS E7T Bedienungsanleitung

Cooper Lighting

Cooper Lighting Lumiere Boca 612 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 603 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 415 Series Bedienungsanleitung

Cooper Lighting

Cooper Lighting AMETRIX ADY071468 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Sure-Lites HZX Series Bedienungsanleitung

Cooper Lighting

Cooper Lighting Stealth Graze Fixture Mounting V90181 Bedienungsanleitung

Cooper Lighting

Cooper Lighting IMI-435 Bedienungsanleitung

Cooper Lighting

Cooper Lighting PORTFOLIO 844 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Sure-Lites EUR Series Bedienungsanleitung

Cooper Lighting

Cooper Lighting PM613CB Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 208 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Fail-Safe DRX Bedienungsanleitung

Cooper Lighting

Cooper Lighting 296 Bedienungsanleitung

Cooper Lighting

Cooper Lighting LUMIERE TR900T Bedienungsanleitung

Cooper Lighting

Cooper Lighting FAIL-SAFE FSR Bedienungsanleitung

Cooper Lighting

Cooper Lighting Profile FTP4 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 683 & Bedienungsanleitung

Cooper Lighting

Cooper Lighting Quiet Ceiling Trimless QCT905RM Bedienungsanleitung

Cooper Lighting

Cooper Lighting Interior Wall Luminaire 688 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Metalux 2HB75 Bedienungsanleitung

Cooper Lighting

Cooper Lighting HALO SPAN PAR30 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung