Cooper Lighting LINEA LV211 Bedienungsanleitung

HALO®

Installation Instructions for LV211 End Feed

701934Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • 770.486.4800 • FAX 770.486.4801

WARNING

Avoid Fire or Electric Shock

•

Follow installation instructions carefully.

•If unsure about electrical installation

consult a qualified electrician.

Safety Information

Read carefully for your protection and save all instructions.

• Turn off the power at fuse or circuit breaker box before installation and

maintenance

• Wear rubber-soled shoes and work on a sturdy wooden ladder

•NOTE: Power supplies should be used on a 120-Volt or 277-Volt fused

circuit. (Check labeling)

• This Lighting System must be installed according to National Electric

Code and local building codes.

• Ground power supply to avoid potential electric shock.

• To avoid a hazard to children, account for all parts and destroy all

packing materials.

• WARNING: Risk of ﬁre. Most dwellings built before 1985 have supply

wire rated 60°C. Consult a qualiﬁed electrician before installing.

• If you are unsure about wiring, consult a qualiﬁed electrician.

•Do not install any lampholder closer than 6" from any curtain or

similar combustible material.

•Wireway Channel is intended to be connected only to 12 volt or

24-volt secondary of an isolated type transformer supply.

Do not exceed nominal supply voltage.

•CAUTION: To reduce risk of ﬁre and electrical shock, use only ﬁxtures

and ﬁttings intended for use with Linea LV 100 series channel, or

Linea LV-114 and LV-214 Wire Way channel.

•CAUTION: Do not exceed 25-amp capacity of Wireway channel

(600 watts at 24 volts).

Layout Planning

Carefully plan your layout and determine location and type of feed point

and connectors required. For most installations it is recommended that

the feed point be attached to the channel prior to mounting the channel

to the mounting surface.

NOTE: The maximum recommended length of Wireway channel feed by

a single feed point is 20' when used with electronic power supplies and

40' when used with magnetic power supplies.

HALO®

1Remove connector cover from connector.

2Insert end of wireway channel into connector and tighten

connector mounting philips screw and tighten allen screws

securely to bus bars.

3Attach 1/2" trade size ﬁtting (supplied by others) to channel

connector using speed nut. The speednut provided with LV211

must be used for surface feed.

4Insert supply wire from transformer secondary as shown and

tighten allen screws securely. Refer to power supply instructions

for recommended supply wire sizes.

5Reinstall connector cover.

701934Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • 770.486.4800 • FAX 770.486.4801

Connector Mounting

Philips Screw

Speed Nut

Buss Bar Allen Screws

1/2" Trade Size Connector

(supplied by others)

Buss Bars

Feed Allen Screws

Cover

Wireway Channel

Connector Mounting

Philips Screw

Cover Screw

Speed Nut

Buss Bar Allen Screws

1/2" Trade Size

Connector

(supplied by

others)

Buss Bars

LV211 Feed

Feeding Wireway Channel with LV211 End feed.

LV211 Feed

Cover

Wireway Channel

Connector Mounting Philips Screw

Cover Screw

Speed Nut

Buss Bar Allen Screw

1/2" Trade Size

Connector

(supplied by

others)

Buss Bars

LV211 Surface Feed

Inhaltsverzeichnis

Andere Cooper Lighting Inneneinrichtung Handbücher

Cooper Lighting

Cooper Lighting MCGRAW-EDISON 1184 Bedienungsanleitung

Cooper Lighting

Cooper Lighting IRiS E7QT4 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 498-RP-TR Series Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 642-A Bedienungsanleitung

Cooper Lighting

Cooper Lighting IMI-435 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 609 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 632-WP SERIES Bedienungsanleitung

Cooper Lighting

Cooper Lighting FAIL-SAFE SCF12 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 417SERIES Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 260 Bedienungsanleitung

Cooper Lighting

Cooper Lighting AMETRIX 1249 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Corelite ADE080932 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 404 Series Bedienungsanleitung

Cooper Lighting

Cooper Lighting MCGRAW-EDISON IMI-687 Bedienungsanleitung

Cooper Lighting

Cooper Lighting AMETRIX 1261 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 600 Bedienungsanleitung

Cooper Lighting

Cooper Lighting PM112cbi Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 645 Series Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 498-RP Bedienungsanleitung

Cooper Lighting

Cooper Lighting VRM Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 1250-3R Bedienungsanleitung

Cooper Lighting

Cooper Lighting FAIL-SAFE VRVT2 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Shaper 640 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Metalux GCAFA Series Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung