INSTALLATION
Suspended T5/T8 Luminaire
1
21
1
2
3
4
2
Insert Barrel Terminal
into keyhole slot.
1Slide Cable Coupler onto Main Suspension Cable
and secure Coupler to appropriate mounting point
at ceiling.
3Insert Cross Cable into Cable Gripper and install
thumbscrew.
Loosen thumbscrew to level xture. Re-tighten
as necessary once xture leveling has been
completed.
2Install Cable Gripper onto Main Suspension Cable.
4Adjust Main Cable to desired length and cut
excess cable if necessary.
! IMPORTANT: Install CABLE CRIMP prior to
cutting cable.
Fully insert Toggle into
keyhole slot.
3Install Screw(s)
CROSS CABLE INSTALLATION
CABLE/GRIPPER INSTALLATION
12” Aircraft Cable with Barrel Terminals
and Steel Toggles (included).
J-BOX
(by others)
POWER FEED
SJT CordCable
Cable Coupler
Cable
Cable Crimp
NON-POWER FEED
Please refer to Corelite“Connection at Ceiling” instructions
for detailed information on various mounting methods.
Cable Coupler
CONNECTION AT FIXTURE
SAVE THESE INSTRUCTIONS
WARNINGS
1) WARNING! – Risk of Fire/Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing.
2) WARNING! – Risk of Fire/Electric Shock. If not qualifiied, consult an electrician.
3) WARNING! – Risk of Fire/Electric Shock. Luminaires wiring, ballasts, or other electrical parts may be damaged when drilling for installation of reflector kit hardware. Check for
enclosed wiring and components.
NOTES
1) NOTE! – This product must be installed in accordance with local/ national electrical codes.
2) NOTE! – Only those open holes indicated in the photographs and/or drawings may be made or altered as a result of kit installation. Do not leave any other open holes in an
enclosure of wiring or electrical components.
3) NOTE! – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or any sharp objects.
4) NOTE! – Disconnect all power before proceeding.
Not all options available. Please consult your Cooper Lighting Representative for availability. Specications and Dimensions subject to change without notice.
JAYLUM
ADE130026
