COP-USA AU40MZ Bedienungsanleitung
1
Intelligent Control Keyboard
Manual Operation
Please read the operation manual carefully before using
2
SAFETY PRECAUTIONS
CAUTION
RI SK OF ELECTRI C
SHOCK. DO NOT OPEN!
CAUTION:
TO REDUCE THE RI SK OF ELECTRI CAL SHOCK, DO DOT
OPEN COVERS. NO USER SERVICEABLE PARTS INSI DE.
REFER SERVI CI NG TO QUALI FI ED SERVI CE PERSONNEL
The l i ght i ng f l ash wi t h a ar rowhead symbol, in an
equilateral triangle, is intended to alert the user.
There i s uni nsul ated “ dangerous vol tage” presence
near by the product ' s encl osure whi ch may be risk of
to persons .
The excl amation point within an equilateral
triangle is intended to alert the user to reference
of t he i mport ant operati ng and mai ntenance
(servicing) instructions .
THE PRODUCT CODE MARKED ON THE BOTTOM COVER. PLEASE
FILL THE CODE IN THE FOLLOWING BLANK. PLEASE SAVING
THIS SPECIFICATION CAREFULLY, SOTHAT CHECKING.
MODEL: ________________________
PRODUCT CODE:________________________
V2.1
3
Contents
Notes for Attention………………………………………………………………4
Ⅰ、The first chapter Panel and functions ……………………………………….6
1.1 Front Panel…………………………………………………………………...6
1.2 back Panel……………………………………………………………………7
1.3 Technical Parameter………………………………………………………….8
、The second chapter Operation Specification………………………………….9
2.1 Please keep all the packing documents……………………………………………9
2.2 Dimension……………………………………………………………………9
2.3 Exterior connecting introduction………………………………………………9
2.4 Display after power on………………………………………………………...10
2.5 Keyboard Operation …………………………………………………………10
2.6 The operation of keyboard menu……………………………………………….13
AppendixⅠ：Troubleshooting ………………………………………………..16
AppendixⅡ：Maintenance service terms ……………………………………..17
4
Notes for Attention：
This manual is to help you use the product correctly, before using for the first time,
make sure read the manual carefully, the safe information and other attentions in
terms mentioned will help you use this products well.
¾Electric safe
Observe all national and area electric safety standards in application. Adopt
DC12V/1.0A power supply, input rated voltage is marked in relative space, If the
power supply and voltage can’t be sure in installation place, please contact with
distributor or factory.
¾Transport carefully
Avoid incorrect operation methods such as heavy pressing, strong vibration, dip in,
etc. during the course of transportation, store and installation otherwise the product
could be damaged. There are sophisticated optical and electronic components inside
the product. Please do not dismount components inside the product to avoid
occurrence of trouble. Whether delivery or return for repair, if there is no part inside
the product, then needs repair by customer himself.
¾The competency requirement on maintenance person
The installation, maintenance about the device should be installed by the qualified
maintenance technologic person. When the device has problem, find the problem
according to spec first instead of maintaining it in a hurry, find the professional
maintenance person if can’t find the reason. About the maintenance, should be
carry out by the authorized maintenance person.
¾Installation request
zDon’t storage, install and use the product in inflammable, explosive dangerous
eare.
zDo not apply the product under the state exceeding limited temperature,
humidity or specifications of power supply.
zFor open or dismantle panel, maybe cause electric shock, don’t try to repair by
yourself, please contact us about all maintenance.
zPlease pull out the power supply, before clear such product. Do not use the
liquid or spray cleaner. Please don’t brush by wet cloth to avoid scratch and
corrosive liquid be into the machine which cause danger.
zContact us if followings appear:
5
a. Lines of power supply and control are broken
b. Using the wrong power supply type or voltage
c.fallorcoverisbroken
d. Capability in Products is abnormal
e. Doesn’t work if according to manual
The whole machine can be kept repair for 3 years
(Remark: LCD screen savers repair for one year)
6
Ⅰ、The first chapter Panel and functions
Such Keyboard is a product supporting with Intelligence Dome Camera,
decoder and other terminal receivers. It connects to the receiver by EIA/RS-485
electric interface. Without the bus driver, one keyboard at most to control 32 domes
or decoders, and the longest communication distance is 1.2Km. the intelligence
dome camera can be controlled and setup expediently by such control keyboard, and
it can also control the terminal decoder directly, achieve the control to the Pan/Tilt,
lens, light, wiper and other front equipments.
1.1 Front Panel
Smart appearance, LCD screen, key-press area, 3-Axis joystick compose the
front panel; Among, LCD Screen is used to display system state and operation
information;3-Axis is mainly used to up and down, left and right of P/T or Dome
control shift gears, far and near of focus lens.
②
③
①
Picture 1
①LCD Screen ②Joystick ③Function Area
Press-key：
Type Name Remark
①LCD screen Display system state and operation information
②Joystick
Assistant menu and key-press operation,
including control up and down, left and right of
P/T or Dome control shift gears, far and near of
focus lens.
③function key-press see keyboard key-press operation
7
1.2 Back Panel
Picture 2
①Power interface ②Brightness of LDC screen adjustable press
③Power、communication interface ④Video interface
S.N. Name Mark Remark
1 Power interface
POWER Connect to exterior steady power supply input
DC12V/1A DC voltage from the interface,
standard power adapter can be used directly.
2
Brightness
adjustment
button
Brightness adjustment button
3
Communication
interface
RS485+
RS485 Communication interface
RS485-
RS485+
RS485 Communication interface
RS485-
DC12V
Power supply DC12V/1A
GND
4 Video interface
VIDEO OUT one video output
VIDEO IN four video input
8
1.3 Technical Parameter
Communication Integrate 16 protocols ，band rate from 2400bps 、
4800bps、9600bps、19200 bps adjustable.
Control RS-485，can control many front end equipments such as
dome, decoder, intelligent P/T, etc. directly.
Joystick control 3-Axis shift joystick, control P/T, lens.
Menu function OSD menu function
Screen display LCD
Communication distance Max to 1200 meters
Power supply DC12V/1A
Dimension 260mm×185mm×80mm
9
、The second chapter Operation Specification
2.1 Please keep all the packing documents
Please keep the original packing documents after opening the packing in order
to packing the keyboards to send to the agent or factory to deal with if problems
have.
2.2 Dimensions
Picture 3
2.3 Exterior connecting introduction
When connecting with other equipments, can’t be connected crossed, must
connect with the corresponding pole.
Picture 4
10
2.4 Display after power on
When the keyboard is powered on, there will be displayed the address of current dome,
baud rate, protocol code and version code, such information will be displayed for 10
seconds. If the user has known the information, can operate the keyboard directly,
such information will be disappeared automatically. If there are displaying the
information as follows:
It means the current address is 001, the baud rate is 2400bps, the protocol code is
P003（the corresponding relations of the protocol code with the protocol will be listed
in Table 2）,the version code is V1.0 After 10 seconds, it will be displayed to keyboard
operation interface, the content of input data buffer ,and the current address will be
displayed at the furthest bottom of the screen. As the following picture, the input data
is 0000, the current address is 001.
Please setup the address,protocol,baudrate as the same with
the dome;Otherwise it would cause the failure communication
to be out of control of the PTZ.
2.5 Keyboard operation
¾modify the dome camera address CAM
zpress number: “1-1024”
zpress key: CAM
After modify, the area of current address will display the address inputted
¾setup the preset position: PRESET
zpress number: “1-128”
zpress: PRESET
¾call preset position CALL
Inhaltsverzeichnis
Andere COP-USA Tastatur Handbücher
