COP-USA CHLP120IR-SDI Bedienungsanleitung

• 1/2.8” COLOR SDI High Definition

• 1080P Full HD, 0 Lux, ICR, IR cut Filter.

• Slow Shutter (Sense Speed 32X)

• 224 High Power Intensity LED, 300 Feet.

• 10-120mm Auto Iris 2.0 Megapixels IR Lens

• Dual CDS, front CDS is High Resolution camera,

back CDS is License Plate Camera

• 10 dipswitch control, Bracket included

• Dual Power DC12V 4A /AC24V 60VA

100Feet

Normal Camera

IR On

0Feet50Feet200Feet300Feet

100Feet300Feet

“IR On” Effective Distance“IR On” Effective Distance

CHLP120IR-SDI

* Specifications are subject to change without notice ** Designed in U.S.A.

SDI 1080P Shuttle & License Plate Camera

Serial Digital Interface

12345678910

OFF

Warning

SDI High Definition Camera

OFF

License Plate Camera

The DIP Switch

NO.10

MENU LENS AUTO

EXP AIS SHUTTER

Shu tt er speed se lec t

License Plate

0 OFF 20 M i l e s 30 KM

60 KM

1A.FLK 40 Miles

2 1/160sec. 50 M i l e s 80 K M

100 KM

31/250sec. 65 Miles

4 1/500sec. 80 M i l e s 130 KM

160 KM

5 1/700sec. 90 Miles

6 1/1000sec. 110 M i l e s 180 KM

200 KM

7 1/1600sec. 120 Miles

8 1/2500sec. 140 M i l e s 230 KM

RS485 Housing Control

(Box camera)

User's Manual

Notice

To reduce the risk of electric shock, please do not disassemble by yourself, it

should be repaired by a qualified technician.

The lightning arrow symbol reminds users that there is

dangerous voltage nearby, enough for a body to produce an

electric shock and cause bodily harm.

The caution symbol, reminds users to pay close attention to the

relevant instructions during the operation and maintenance of

the product.

Please fill in the product model and manufacturing number. This information will

assist you in the future should you need to refer to it for service or repair.

Model:

Number:

Important Safety Precautions

1、Before installation, please read the manual, and keep this

guide for future reference.

2、Please comply with all warnings on the device and follow the

instructions carefully.

3、 Please wipe or clean the device before connecting the device

to power, and please do not use liquid/spray cleaning agents.

4、Please used our recommended factory parts when in need of

repair, otherwise, failure may occur.

5、The device should use the recommended power and voltage from

the manual. If the power and voltage of the installation site

is unclear, please contact us for further assistance.

6、 Protect the power cord, especially along the plug and camera

data lines. Do not submerge in water or any liquids.

7、 To prevent lightning surge damage, please install surge

protectors.

8、 To prevent fire and electric shock, please do not over-extend

the data lines or allow foreign substances into

the machine which

may cause dangerous corrosion.

9、Do not install in areas that have unstable brackets, walls,

roofs, etc. Otherwise, it may result in bodily harm.

10、Please contact your dealer should you have the following

issues:

10.1 Wrong power supply or voltage.

10.2 Damaged housing unit.

10.3 Abnormal behavior with device performance.

10.4 After consulting the user manual and it still does not

operate.

11、When part replacement is needed, please contact your dealer

so we can provide approved parts to maintain the same

performance.

I Summary .............................................. 6

II Features ............................................ 6

III Product Size Chart ................................. 8

IV Socket Function .................................... 9

1.Camera control board layout ...................... 9

2.Power board socket diagram ....................... 10

V Connecting different camera models ................. 12

1、Color box camera with DC12V .................... 12

2、Color box camera with AC24V ..................... 12

VI Auxiliary Preset Function ......................... 13

I. Summary

The integrated shell uses an all-metal construction, the

compatible color camera is protected and is for outdoor and

indoor equipped with light compensation at night。The unit has

a waterproof grade of IP66, uses EIA/RS-485 connections for

remote control, has internal and external infrared compensation

light for both near and far distances. The unit also is set

automatically to have infrared light at night.

II. Features

1、AC24V or DC12V compatible

2. When using DC12V, use FPC flexible connect lines;

3、When connecting integrated devices, a wire control function

is available for convenience.

4、The unit is set at default with a range address of:0-255, baud

rate is 2400, Pelco-D protocol;

5、 Dual power supply input, input voltage DC12V±10%/AC24V±

10%;

6、Photo Sensor can be adjusted on four levels,

front or back settings may be chosen;

7、Double-sided infrared is 15°distance more than 120M/394ft, power

is 15W, internal infrared is 45 ° ,5W, both near and far

infrared radiation;

8、All-metal construction is strong and durable, with IP66

Grade.

9、Unit can use RS485 control, 120Ω Resistor;

10、IR Lights are optically triggered by camera

11、Preset positions up to 32;

12、Has automatic on/off Infrared Control;

13、Manual Settings to open or close;

III. Product Size Chart

IV. Socket Function

1、Camera control board layout

1.1 BK1：DIP switch

1.1.1 1—8 address code，binary representation，ON is 1，OFF

is 0, from 8 to 1 reading:

If 1 is set ON, all other set off, is 00000001,that is decimal 1.

f 2 is set ON, all other set off, is 00000010,that is decimal 2.

And so on, the largest that is decimal 11111111，that is decimal 255.

1.1.2 The 9th is RS485 120Ω resistance select

switch,

1.1.3 The 10th is Photo Sensor switch,

set ON for the Photo Sensor in the Front, set OFF for the Photo Sensor i

in the Back

1.1 S1:Photo Sensor sensitivity has four Settings:

(00):1lux,(01):2lux,(02):4lux,(03):10lux

1.2 S3：D/N signal voltage

output select, low level, 3.3V option

1.3 J1：DC12V output，suitable DV12V box camera power supply.

1.4 J2：System program interface

Inhaltsverzeichnis

Andere COP-USA Sicherheitskamera Handbücher

COP-USA

COP-USA CM25P Bedienungsanleitung

COP-USA

COP-USA CC45WD Bedienungsanleitung

COP-USA

COP-USA CM1-VP Bedienungsanleitung

COP-USA

COP-USA CM259VAIR-WF Bedienungsanleitung

COP-USA

COP-USA CC35NVD-OSD Bedienungsanleitung

COP-USA

COP-USA CD69IRICR-1K Bedienungsanleitung

COP-USA

COP-USA CD45IRIP-9531 Bedienungsanleitung

COP-USA

COP-USA CG36WD Bedienungsanleitung

COP-USA

COP-USA CD15-VPSL Bedienungsanleitung

COP-USA

COP-USA CD35N Bedienungsanleitung

COP-USA

COP-USA CM35IR Bedienungsanleitung

COP-USA

COP-USA CC25NVD?H Bedienungsanleitung

COP-USA

COP-USA CD259IP-9533R Bedienungsanleitung

COP-USA

COP-USA CD260XIRICR-WDR Bedienungsanleitung

COP-USA

COP-USA NC48IR Bedienungsanleitung

COP-USA

COP-USA CD55NV Bedienungsanleitung

COP-USA

COP-USA CD358D-IPVP Bedienungsanleitung

COP-USA

COP-USA CC25NVD-SL Bedienungsanleitung

COP-USA

COP-USA CM15 Bedienungsanleitung

COP-USA

COP-USA CC24ANV Bedienungsanleitung

COP-USA

COP-USA CMR35-SL Bedienungsanleitung

COP-USA

COP-USA CC25NVD Bedienungsanleitung

COP-USA

COP-USA CM25SH Bedienungsanleitung

COP-USA

COP-USA CS35W Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung