Costar CR16PVM Bedienungsanleitung

Quick Guide

4K Decoder

Please read this manual thoroughly before use and keep it handy for future reference.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EX- POSE

THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC

OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON

THE EQUIPMENT.

CAUTION

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is in- tended

to alert the user to the presence of dangerous voltage within the products enclosure

that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the

literature accompanying the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF ELECTRICSHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICABLE PARTSINSIDE.

REFER SERVICINGTO QUALIFIED SERVICE PERSONNEL

FCC COMPLIANCE STATEMENT

CE COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful inter-

ference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

FCC INFORMATION: This equipment has been tested and found to

comply with the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commer-

cial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the in-

struction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful in-

terference in which case the user will be required to correct the interference

at his own expense.

CAUTION: Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

This Class A digital apparatus complies with Canadian ICES-003.

Cet

appareil

nume

rique

classe

est

conforme

norme

NMB-003

Canada.

WARNING

This is a Class A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate

measures.

CAUTION

RISK OF EXPLOSION IF BATTERYIS REPLACED BYAN INCORRECT TYPE.

DISPOSE OF USED BATTERIESACCORDING TO THE INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the third prong is provided for

your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

15.

CAUTION –THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED

SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO

NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE

OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.

16.

Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2

power source only.

17. ITE is to be connected only to PoE networks without routing to the outside plant.

Quick Guide

Overview

Table of Contents

Table of Contents ......................................................................................................................................1

1. Overview..................................................................................................................................................3

1.1 Package Contents ...........................................................................................................................4

1.2 Decoder Description........................................................................................................................4

2. Installation ...............................................................................................................................................6

2.1 Starting System ..............................................................................................................................6

2.2 Quick Setup ...................................................................................................................................7

2.2.1 Account ..............................................................................................................................7

2.2.2 System ...............................................................................................................................8

2.2.3 Network..............................................................................................................................9

2.2.4 Time/Date...........................................................................................................................9

2.2.5 Easy Installation Wizard .....................................................................................................10

3. Live Screen Configuration ........................................................................................................................11

3.1 Icons in Live screen ...................................................................................................................... 12

3.2 Quick menu.................................................................................................................................. 13

3.2.1 Channel Assign .................................................................................................................. 14

4. Setup menu............................................................................................................................................ 15

4.1 General buttons in Setup menu................................................

4.2 SYSTEM.................................................................................

4.2.1 System ....................................................................

4.2.2 Time/Date................................................................

4.2.3 Account > User ........................................................

4.2.4 Configuration (Config) ...............................................

4.3 CAMERA ................................................................................

4.3.1 Channel ...................................................................

4.4 DEVICE .................................................................................

4.4.1 Display.....................................................................

4.4.2 Serial Device ............................................................

4.5 EVENT...................................................................................

4.5.1 Alarm In ..................................................................

4.5.2 Motion .....................................................................

4.5.3 Video Loss................................................................

4.6 NETWORK .............................................................................

4.6.1 Basic .......................................................................

5. Web Setup.............................................................................................................................................. 16

5.1 Log In ......................................................................................................................................... 16

Quick Guide

Overview

5.2 General buttons in Setup menu ...................................................................................................... 17

5.3 SYSTEM ..............................................................................

5.3.1 System ....................................................................

5.3.2 Time/Date................................................................

5.4 CAMERA .............................................................................

5.4.1 Channel Assign .........................................................

5.5 DEVICE...............................................................................

5.5.1 Display.....................................................................

5.5.2 External ...................................................................

5.6 EVENT ................................................................................

5.6.1 Alarm In ..................................................................

5.6.2 Motion .....................................................................

5.6.3 Video Loss................................................................

5.7 NETWORK .............................................................................

5.7.1 Basic ...........................................................................

6. Product Specification ......................................................................

Quick Guide

Overview

1. Overview

This chapter describes device overview, components and their terms and features.

This product is a device that displays images transmitted from an IP camera on monitor.

The device features include the following:

Convenient UI from user’s viewpoint

16 IP camera input

Providing H.264, H.265 compression

Support dashboard display

4K resolution support

Remote control through a network or local monitor

Quick Guide

Overview

1.1 Package Contents

The device package contents consist of the following:

Note

Please check all components involved.

Table 1-1 Package contents

Name

Decoder

Mounting Bracket

DC 12V Adaptor

Bracket fixing screw

Quick guide

Program CD

1.2 Decoder Description

Each part is listed in the below:

Figure 1-1 Name and Connection of each front section

Table 1-2 Name and Function of each front section

No.

Name

Function

USB port

USB port is connected for USB mouse or firmware upgrade.

Micro SD

Store media file.

LAN LED

Pointing out network in connection.

Power status LED

Pointing out device on/off.

USB port

USB port is connected for USB mouse or firmware upgrade, and data

back-up.

Quick Guide

Overview

Figure 1-2 Name and Connection of rear section

Table 1-3 Name and Function of rear section

No.

Name

Function

NETWORK

Network connector for IP Camera and CMS.

AUDIO OUT

Audio output port.

CVBS

CVBS(Spot Video) output port.

HDMI

HDMI output port.

ALARM OUT

Alarm output connector.

DC12V

Power supply connector.

Quick Guide

Installation

2. Installation

You can fix the product on the wall using the supplied bracket.

Refer to the drawing below for the hole position of the bracket.

Figure 2-1 Dimension

2.1 Starting System

Power supply begins with system operation as follows:

1 Switching on initialize with below icons in order.

2 With buzzer sounds, the start screen is presented.

3 In Log in screen, enter the ID, Password and press OK.

Note

Default ID & Password is admin/admin.

Attention

Please change password after login due to security.

Inhaltsverzeichnis

Andere Costar Medienkonverter Handbücher

Costar

Costar CMIPVM20 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung