Costway FP10120US Bedienungsanleitung

Please give us a chance to make it right and do better !

Contact our friendly customer service department for help first.

Replacements for missing or damaged parts will be shipped ASAP !

Do NOT return this item.

Portable Air Conditioner

FP10120US

USER’S MANUAL

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

US office: Fontana UK office: Ipswich AU office: Truganina

DE office: Hamburg

FR office: Saint Vigor d'Ymonville

PL office: Gdańsk

US:cs.us@costway.com

UK:cs.uk@costway.com

AU:[email protected]

Before You Start

Please read all instructions carefully.

Retain instructions for future reference.

Separate and count all parts and hardware.

Read through each step carefully and follow the proper order.

We recommend that, where possible, all items are assembled

near to the area in which they will be placed in use, to avoid

moving the product unnecessarily once assembled.

Always place the product on a flat, steady and stable surface.

Keep all small parts and packaging materials for this product

away from babies and children as they potentially pose a serious

choking hazard.

1. BEFORE YOU BEGIN

1.1 PRODUCT DESCRIPTION

Our powerful portable air conditioners are great cooling solutions for

single rooms, creating a comfortable atmosphere in your space. It

also has ventilation and dehumidifying function for circulating air and

removal of moisture. They're self-contained systems that do not

require any permanent installation allowing you to move to the space

in which it is most needed. They're commonly used in kitchen,

temporary-resided place, computer rooms, garages, and many other

places where installation of Air-conditioner Outdoor Unit is limited.

2. FOR YOUR SAFETY

Your safety is the most important thing we concerned!

2.1 OPERATIONAL PRECAUTIONS

WARNING- To reduce the risk of fire, electric shock or injury

to persons or property:

■ Please let the portable air conditioner stand upright for at least 24

hours before plugging in.

■ If the supply cord is damaged, it must be replaced by the

manufacturer or similarly qualified persons in order to avoid a hazard.

Please read this manual carefully and fully

understand before operating your appliance.

WARNING

02 03

■The appliance shall be disconnected from its power source during

service.

■Always operate the unit from a power source of equal voltage,

frequency and rating as indicated on the product identification plate.

■Always use a power outlet that is grounded.

■Unplug the power cord when cleaning or when not in use.

■Do not operate with wet hands. Prevent water from spilling onto

the unit.

■Do not immerse or expose the unit to rain, moisture or any other

liquid.

■Do not leave the unit running unattended. Do not tilt or turn

over the unit.

■Do not unplug while the unit is operating.

■Do not unplug by pulling on the power cord.

■Do not use an extension cord or an adapter plug.

■Do not put objects on the unit.

■Do not climb or sit on the unit.

■Do not insert fingers or other objects into the air outlet.

■Do not touch the air inlet or the aluminum fins of the unit.

■Do not operate the unit if it is dropped, damaged or showing

signs of product malfunction.

■Do not clean the appliance with any chemicals.

■Ensure the unit is far away from fire, inflammable, or explosive

objects.

■The unit shall be installed in accordance with national wiring

regulations.

■Do not use means to accelerate the defrosting process or to

clean, other than those recommended by the manufacture.

■The appliance shall be stored in a room without continuously

operation sources (for example: open flames, an operating gas

appliance or an operating electric heater).

■The appliance shall be stored so as to prevent mechanical

damage from occurring.

■Do not piece or burn, even after use.

■Be aware that refrigerants may not contain an odour.

■Compliance with national gas regulations shall be observed.

■Keep any required ventilation openings clear of obstruction.

■The appliance shall be stored in a well-ventilated area where the

room size corresponds to the room area as specified for operation.

If you don't understand something or need help, please

contact our customer service.

04 05

3. PRODUCT OVERVIEW

3.1 PRODUCT DIAGRAM

3.2 FEATURES

√ High Capacity in a compact size with fan, cooling and

dehumidifying function.

√ Temperature setting and display

√ LED Digital display

√ Electronic control with built-in timer, sleep mode

√ Self-evaporating system for better efficiency

√ Auto shut off when tank is full

√ Automatic restart in the event of power outage

√ Auto defrosting function at low ambient temperatures

√ Remote control

√ 2-speed fan

√ Casters for easy mobility

4.1 UNPACKING

● Unpack the carton and take the appliance and accessories out.

● Check the device after unpacking for any damage or scratches on it.

● Accessories:

Note: The appearance is only for reference. Please see the real

product for detailed information.

4. INSTALLATION

Control panel

Front display

Air outlet with adjustable louver

Handle

Air inlet with air filter

Caster

Drainage hole

Air exhaust

■1. Exhaust hose

■2. Hose connector

■ 3. Window kit adapter

■4. Remote control

■ 5. Window kit

123

06 07

4.2 Choose your location

4.3 ATTACH THE EXHAUST HOSE

The air conditioner requires being vented outside so that the exhaust

air which comes from the appliance and contains waste heat and

moisture can escape the room.

Do not replace or extend exhaust hose which will result in decreased

efficiency, even worse shut down the unit due to low back-pressure.

● If tipped more than 45°, allow the unit to

set upright for at least 24 hours before start

up.

● Place the unit on a firm, level surface in an

area with at least 20 inch of free space

around it to allow for proper air circulation.

● Do not operate in close proximity to walls,

curtains, or other objects that may block air

inlet and outlet. Keep the air inlet and

outlet free of obstacles.

● Never install the unit where it could be

subject to:

★ Heat sources such as radiators, heat registers, stoves or other

products that products that produce heat.

★ Direct sunlight

★ Mechanical vibration or shock

★ Excessive dust

★ Lack of ventilation, such as cabinet or bookcase

★ Uneven surface

r=20 inch

Step 1:

Connect the hose connector to one

end of the exhaust hose.

Step 2:

Connect the window kit

adapter to the other end

of the exhaust hose.

Step 3:

Extend the adjustable window

kit to the length of the

window. Connect the exhaust

hose to the window kit.

Step 4:

Close the window to secure the

kit in place. It needs to hold the

windows kit firmly in place,

secure the window kit with duct

tape if required. It is

recommended that the gap

between the adapter and the

sides of the window should be

sealed off for maximum

efficiency.

08 09

Step 7:

Adjust the louver at the air outlet, and then switch on the unit.

Step 5:

Attach the hose connector to the exhaust air

outlet of unit.

Step 6:

Adjust the length of the flexible

exhaust hose, and avoid bends in the

hose. Then place Air Conditioner near

an electrical outlet.

5. OPERATION

5.1 CONTROL PANEL AND DISPLAY

Lock Press it for 3 seconds to enable/disable

the lock function.

Mode

Press it repeatedly to switch the operating

mode among Fan, Cooling and

Dehumidifying Mode.

Up Increase the room temperature

(60.8℉~89.6℉) or adjust timer setting.

Power Press it to turn the on/off the machine.4

Down Decrease the room temperature or timer

setting.

10 11

35 4

108 9

5.3 SETTINGS

5.3.1 Start-up and Shutdown

Press POWER to turn the unit on.

Press MODE button to select the desired operation mode.

Press POWER again to turn off the power.

5.3.2 Operation mode

The unit has four operation modes: Cool, dry, fan and sleep.

A. Cooling your room

Select the cool mode to lower the temperature in your room.

Press MODE button repeatedly until the COOL indicator lights

up.

Press Up/Down button to adjust the temperature which is

displayed on the screen. The temperature can be set between 60.8℉

and 89.6℉.

Press SPEED button repeatedly until the desired fan speed

indicator lights up.

To control the direction of the air flow horizontally, please adjust the

inner louver by hand.

Note: The air conditioner stops if the room temperature is lower than

selected temperature.

B. Ventilating your room

Press MODE button repeatedly until the FAN indicator lights up.

(In ventilation mode the room air is circulated, but not cooled.)

Press SPEED button repeatedly to select the fan speed as

desired.

5.2 REMOTE CONTROL

Speed Press it to switch the fan speed between

High and Low.

Timer

Set a time for the unit to automatically

start or stop. Press the Up and Down

buttons to adjust the time.

Fan speed

indicator Indicate the High/Low fan speed.8

Digital display Display the hours of timer setting or room

temperature.

Mode indicator Indicate the machine operating mode

(Cooling, Dehumidifier or Fan).

12 13

High Up Cool

Low Fan

Timer Power

Down Dry

Sleep ℃/℉

5.4 DRAINAGE

Manual drainage:

1) When the machine stops after the water is full, please unplug the

power plug.

Notes: Please move the machine carefully, so as not to spill the water

in the water pan at the bottom of the body.

2) Place the water container below the side water outlet behind the

body.

3) Unplug the water plug, the water will automatically flow into the

water container.

5.3.4 Automatic Defrost

At low room temperatures, frost may build up at the evaporator

during operation. The unit will automatically start defrosting, the

POWER LED indicator blinking. The defrost control sequence is as

follows:

A. When the unit operates in the cool or dry mode, the ambient

temperature sensor detects the evaporator coil temperature is below

30.2℉, then the compressor will stop operating for 10 minutes or the

coil temperature reaches 44.6℉, the unit will restart to cooling

operation mode.

B. When the unit operates in dry mode, once the coil temperature

sensor detects the temperature of the evaporator is below 104℉and

the differential temperature between coil temperature and room

temperature is below 66.2℉after the compressor runs for 20

minutes, the unit starts defrosting for 5 minutes and the power

indicator blinking.

5.3.5 Overload Protection

In the event of a power loss, to protect the compressor there is a

3-minute delay until the compressor restarts.

C. Drying your room

Press MODE button on the control panel or remote control, the

dry indicator lights up. The fan speed is unable to select. User should

connect the hose to the drain outlet at the bottom of the unit.

Note: In this mode, the fan speed switches over to low speed and

cannot be selected.

D. Sleep mode

The sleep mode can be activated when in cool mode.

(Note: Sleep mode can only be turned on by remote control.)

■In cool mode :

After 1 hour the preset temperature will increase by 33.8℉, and after

another hour the preset temperature will again increase by 33.8℉.

The timer has two ways of operation:

To turn off

(When power

on)

Press Timer key

to turn on the

timer function.

Press Up /Down

repeatedly to set

the delay OFF time.

To turn on

(When power

off)

Press Timer key

to turn on the

timer function.

Press Up /Down

repeatedly to set

the delay OFF time.

Cancel timer

Press Up /Down repeatedly until the LED

shows ‘00’.

Note: Pressing POWER button will also exit the

timer setting.

5.3.3 TIMER SETTING (1hour-24hours) :

14 15

Notes:

1. Keep the water plug properly.

2. During drainage, the body can be tilted

slightly backwards.

3. If the water container cannot hold all the

water, before the water container is full,

stuff the water outlet with the water plug as

soon as possible to prevent water from

flowing to the floor or the carpet.

4. When the water is discharged, stuff the

water plug.

Notes: Restart the machine after the water

plug and drainage cover are installed,

otherwise condensate water of the machine

will flow to the floor or the carpet.

Continuous drainage

The self-evaporating system uses the collected water to cool the

condenser coils for better efficient performance. It is no need to

empty the drainage tank in cooling operation except in drying

operation and high humidity conditions. The condensate water

evaporates at the condenser and evacuated through the exhaust

hose.

For continuous operation or unattended operating in drying operation,

please connect the attached drain hose to the unit. Condensate water

can be automatically flow into a bucket or drain by gravity.

● Switch off the unit before

operating.

● Remove the plug of the water

outlet opening, and keep it in a

safe area.

● Securely and properly connect

the drain hose and make sure it is

not kinked and clear of

obstruction.

● Place the outlet of hose over a

drain or bucket and ensure that

water could freely flow out of the

unit.

● Do not submerge the end of

hose into water; otherwise it can

cause "Air Lock" in the hose.

To avoid water spillage:

• As the negative pressure of condensate drain pan is large, tilt the

drain hose downward toward the floor. It is appropriate that the

degree of inclination should exceed 20 degrees.

• Straighten the hose to avoid a trap existing in the hose.

16 17

6. CLEANING AND CARE

6.1 CLEANING THE AIR FILTER (every two weeks)

Dust collects on the filter and restricts the airflow. The restricted

airflow reduces the efficiency of the system and if it becomes blocked

it can cause damage to the unit.

The air filter requires regular cleaning. The air filter is removable for

easy cleaning. Do not operate the unit without an air filter, or the

evaporator may be contaminated.

1. Press POWER button to switch off the unit and unplug the power

cord.

2. Remove the filter mesh from the unit.

3. Use a vacuum cleaner to suck dust from the filter.

4. Turn the filter over and rinse the air filter under running water. Let

the water run through the filter in the opposite direction of air flow.

Set aside and allow the filter to air dry completely before reinstalling.

6.2 CLEANING UP OF REFRIGERANT

General Measures:

1. Gas/vapor heavier than air. May accumulate in confined spaces,

particularly at or below ground level.

2. Eliminate every possible source of ignition.

3. Use appropriate personal protection equipment (PPE).

4. Evacuate unnecessary personnel, isolate, and ventilate the area.

5. Do not get into eyes, on skin, or on clothing. Do not breathe

vapors or gas.

6. Prevent entry to sewers and public waters.

7. Stop the source of the release, if safe to do so. Consider the use of

water spray to disperse vapors.

8. Isolate the area until gas has dispersed. Ventilate and conduct a

gas test in the area before entering. Contact competent authorities

after a spill.

Switch off the unit and

remove the air filter.

Rinse the air filter under

running water.

Warning!!!

Do not touch the evaporator surface with bare-hand, or your fingers

may be injured.

18 19

Inhaltsverzeichnis

Andere Costway Klimaanlage Handbücher

Costway

Costway EP23475 Bedienungsanleitung

Costway

Costway EP24555US-WH Bedienungsanleitung

Costway

Costway ES10141US Bedienungsanleitung

Costway

Costway ES10113US-WH Bedienungsanleitung

Costway

Costway ES10125US-WH Bedienungsanleitung

Costway

Costway FP10344 Bedienungsanleitung

Costway

Costway FP10346 Bedienungsanleitung

Costway

Costway FP10259US Bedienungsanleitung

Costway

Costway FP10267US Bedienungsanleitung

Costway

Costway FP10264US Bedienungsanleitung

Costway

Costway FP10343CA-WH Bedienungsanleitung

Costway

Costway EP24041 Bedienungsanleitung

Costway

Costway EP25102 Bedienungsanleitung

Costway

Costway ES10115US-WH Bedienungsanleitung

Costway

Costway FP10234 Bedienungsanleitung

Costway

Costway FP10233 Bedienungsanleitung

Costway

Costway FP10119US Bedienungsanleitung

Costway

Costway ES10043 Bedienungsanleitung

Costway

Costway FP10137UC-WH Bedienungsanleitung

Costway

Costway FP10269US Bedienungsanleitung

Costway

Costway ES10122US Bedienungsanleitung

Costway

Costway FP10118DE Bedienungsanleitung

Costway

Costway FP10271US Bedienungsanleitung

Costway

Costway EP24581US-WH Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung