Safety Information.............................................. 2
20” Floor Fan...................................................... 3
24” Barrel Fan.................................................. 4-5
30” Pedestal Fan............................................. 6-7
30” Drum Fan................................................ 8-10
Troubleshooting................................................ 11
Warranty........................................... Back Cover
Table of Contents
Safety Information
- Turn off, unplug unit, and wait for fan to stop
before moving, storing, and / or changing
operating locations.
- Operate only on 115 volt 60 Hz (cycle) current
with a minimum of a 15 amp circuit.
- Before operating always check fan for loose or
damaged parts. Inspect power cord for any
damage. Never use fan if any parts are
damaged or missing. Never use fan without
safety guards attached.
- When used with an extension cord, use only
cord of proper size (Amp rating), UL listed, and
with receptacle to accept three prong grounded
plug furnished on the fan’s power cord. Always
keep power cord and extension cords away
from heat, oil, and sharp edges. Inspect cords
periodically and replace if damaged.
- Disconnect fan from power source when not in
use, before servicing and when cleaning or
repairing.
- Repair of this appliance should be done by a
qualified electrician.
- In case of power failure, turn fan off at knob or
power chain to prevent unexpected restarting
and component damage.
- Keep children away from fan at all times.
IMPORTANT: READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY, SERVICE OR USE
OF THIS FAN. FAILURE TO COMPLY WITH THESE INSTRUCTIONS COULD RESULT IN
SERIOUS PERSONAL INJURY AND / OR PROPERTY DAMAGE.
This unit is designed for indoor
use only. Do not expose to
elements or allow to become wet.
WARNING
To guard against electric shock
while operating, do not allow fan
to come in contact with other grounded objects
such as pipes, radiators, etc.
WARNING
To Reduce The Risk Of Fire Or
Electric Shock, Do Not Use This
Fan With Any Solid- State Speed Control
Device.
WARNING
Risk of fire, electric shock, or
personal injury when performing
service or maintenance. Unplug or disconnect
the fan from the power supply before servicing.
WARNING
If safety guards have been removed to service or maintain this fan, reinstall or remount the safety
guards as previously installed.
To Reduce The Risk Of Electric
Shock And Injury To Persons, Do
Not Use In a Window.
WARNING
For General Ventilating Use Only.
Do Not Use To Exhaust
Hazardous Or Explosive Materials And Vapors.
WARNING
NEVER LEAVE A FAN
UNATTENDED WHILE
OPERATING OR WHILE
CONNECTED TO A POWER
SOURCE
2www.TractorSupply.com For customer support, call 1-866-641-4540 HVF Air Circulator User’s Manual
DO NOT MOVE FAN WHILE
OPERATING! MOVING FAN DURING
OPERATING CAN CAUSE BLADE DAMAGE.
WARNING
