coval PSA100C Bedienungsanleitung
v 03
Dimensions and characteristics may be modified without notice.
®
Electronic vacuum switch PSA100C
1Display
Mode To select the different modes
+/- To change settings
LED output 1 & 2 Switching indicators
2 Switch output 1 adjustment
To adjust switch output 1 threshold, push the “mode” key
1 time.
The display is alternating between “H1” and the adjusted
value.
To change this adjustment, push “+/-” keys until the
requested value is displayed.
After 5 seconds, the
chosen value registers
automatically and the
screen returns to the
vacuum display.
To change this adjustment, push “+/-” keys to display the
requested value.
After 5 seconds, the chosen value registers
automatically and the screen returns to the vacuum
display.
3 Switch output 2 adjustment
To adjust the switch output 2 threshold, push the “mode”
key 2 times quickly.
The display is alternating between “H2” and the adjusted
value.
To change this adjustment, push “+/-” keys to display the
requested value.
After 5 seconds, the
chosen value registers
automatically and the
screen returns to the
vacuum display.
Mode
+
-
To adjust the hysteresis
h1, push the mode key.
The display is alterna-
ting between “h1” and
the adjusted value.
or
To adjust the hysteresis
h2, push the mode key.
The display is alterna-
ting between “h2” and
the adjusted value.
or
Attendre
5 sec.
- 1
46H1
+75H1
75
1xM
-
Attendre
5 sec.
- 2
46H2
+65H2
75
2xM
-
+-
07h1
75
Attendre
5 sec.
10h1
nc
no
+-
07h2
10
Attendre
5 sec.
After 5 seconds, the
chosen value registers
automatically and the
screen returns to the
vacuum display.
To adjust output 1
configuration, push
the “mode” key.
To change this adjust-
ment, push “+/-” keys.
NO or NC are
displayed.
or
v 03
Dimensions and characteristics may be modified without notice.
Electronic vacuum switch PSA100C
®
To change this adjustment, push “+/-” keys until the
requested value is displayed.
4 Locking / Unlocking
The locking of the settings guarantees that they can-
not be changed by mistake.
To activate the locking, push simultaneously and during 3
seconds the “mode” and the “-” keys.
is displayed in order to show that the locking is
activated.
To deactivate the locking, push simultaneously and
during 3 seconds the “mode” and the “-” keys.
is displayed in order to show that the locking is
deactivated.
5 180° display rotation
To rotate the display push the “+” and “-” keys during 3
seconds at least.
6 Factory settings
To reprogram the factory settings, push the “mode” and
“+” keys during 5 seconds.
is displayed.
7 Preset values
H1 : 75 h1 : 10 Output NO
H2 : 65 h2 : 10 Output NO
8 Tightening couple
Manual mounting.
Do not use tools.
LC
UC
PO
Maintenir
3 sec.
Maintenir
3 sec.
h2 10
+-
+-
nc
no
M-
UC
LC
PO
Maintenir au
moins 3 sec.
Maintenir au
moins 5 sec.
+-
M-
M+
10
Attendre
5 sec.
After 5 seconds, the
chosen value registers
automatically and the
screen returns to the
vacuum display.
To adjust output 2
configuration, push
the “mode” key.
To change this adjust-
ment, push “+/-” keys.
NO or NC are
displayed.
or
Andere coval Schalten Handbücher
