CP CPM Bedienungsanleitung
Instruction manual for spiral mixer mod. CPM80-200
1
INSTRUCTION MANUAL
AUTOMATIC SPIRAL
MIXERS 80-200
MODELS CPM, CPMel
Instruction manual for spiral mixer mod. CPM80-200
2
Index
General Infor ation Pag.4
Documentation supplied 4
This manual 4
Information property rights 4
Conventions 5
Manufacturers identification details 6
Machine identification details 6
EC declaration of conformity CE 7
Guarantee 7
se of the manual 8
Description of the machine 9
Main parts of the machine 10
Security infor ation 11
Safety criteria 11
Qualification of personnel 12
Safeguards 13
Hazardous areas and residual risks 16
Machine specification
17
Technical specifications 17
Installation 18
Hazardous areas and residual risks during installation 18
Qualifications of the operator 18
Transport 19
Preliminary operations 21
Installation 21
Preparation for start-up 22
Testing 22
Operator interface 24
Controls
Machine operation 26
Qualification of the operator 26
Spiral mixer model CPM 26
Spiral mixer model CPMel 28
Maintenance 33
Routine maintenance 33
Scheduled servicing 33
Head belts tightening procedure 34
Bowl belts tightening procedure 35
Instruction manual for spiral mixer mod. CPM80-200
3
Trouble-shooting 36
Qualification of the operator 36
Machine scrapping 38
Qualification of the operator 38
Disconnecting the machine 38
Disconnecting procedure 38
Residual risks after machine disconnection 39
List of attached docu entation 39
Instruction manual for spiral mixer mod. CPM80-200
4
Cap. 1
General infor ation
1.1
Docu entation supplied
•Instruction manual ( this booklet )
•Spare parts catalogue
Other docu entation
•Wiring diagrams
1.2
This anual
ADRESSEES
•Carrier
•Installer
•End user
•Maintenance engineer
1.3
Infor ation property rights
This manual contains copyright information. All rights are reserved. No part of this
manual can be reproduced or photocopied without prior written permission of the
manufacturer. Permission to use this documentation has only been given to the
customer to whom this manual has been supplied as part of the machine’s equipment
and only for the purpose of installation, operation and mainteanance of the machine
to which the manual refers.
The manufacturer declares that all the information container herein is in accordance
with the technical and safety specifications of the machine to which the manual refers.
The manufacturer will not be held responsible for direct or in direct damage or injury
to people, objects or animals resulting from the use of this documentation or the
machine in non-standard conditions.
The manufacturer reserves the right to introduce technical modifications or
improvements both to the documentation and to the machines without prior notice.
Modifications and improvements may also concern machines of the same model
described in this manual, but which have a different serial number. The information
container herein refers in particular to the machine specified in 1.6 “ Machine
identification details “ .
Instruction manual for spiral mixer mod. CPM80-200
5
1.4
Conventions
LINGUISTIC CONVENTIONS
•
On the left, on the right : When speaking of such, we refer to the operator’s
position when facing the control panel.
•
Qualified workers : all those people who thanks to their training,
experience, education as well as their knowledge of standards, regulations,
safety precautions and operation conditions, have been authorised by the
people in charge of the plant safety to carry out any necessary action and are
capable of identifying and avoiding possible danger.
PRINTING CONVENTIONS
PSE
: Personal Safety Equipment
: Where N represents a generic number ( e.g. ); symbolic representation
of a control or warning device ( e.g. buttons, selectors and indicator lights ).
: Where L represents a generic letter ( e.g. ); symbolic representation of
the machine.
NOTE: Notes contain important information and are highlighted separately from the
text to which they refer.
BEWARE : Beware indications describe the procedures, the partial or total non-
observance of which can cause damage to the machine or to the devices connected to
it.
DANGER: Ranger indications describe the procedures, the partial or total non-
observance of which can injure or harm the operator.
A
L
N
3
Instruction manual for spiral mixer mod. CPM80-200
6
1.5
Manufacturer identification details
Via Perotti, 5
25125 Brescia -ITALY-
Tel: +39.030.3581864
Fax: +39.030.3581859
Mail: [email protected]
1.6
Machine identification details
Type: AUTOMATIC SPIRAL MIXER MOD.
CPM 80-200
Fig. 1.1 Position of the name plate
TI
TI
Instruction manual for spiral mixer mod. CPM80-200
7
1.7
EC declaration of confor ity “ CE”
See Enclosure 1 EC declaration of conformity “CE”
1.8
Warranty
GENERAL CONDITIONS
•This machine ( indicatine the appropriate serial number ) is guaranteed for 12
months. This guarantee is, however, subject to the claim being made by means
of a registered letter, within 8 days after the discovery of the faults or defects
providing that confirmation and acknowledgement is obtained prior from the
manufacturer.
•The warranty covers the replacement or repair of the faulty part ( component,
machine or part of the machine ) but does not cover the cost of
dismantlement, re-assembly or shipping.
•The replacement of any part does not bring about the renewal of the guarantee
period for the entire machine, unless the entire machine was replaced.
Therefore, under no circumstance shall the manufacturer be liable for
compensation of whatever type and the purchaser shall relinquish any claim
for damage, loss or expense, even to third parties arising from the machine
stoppage.
•The guarantee does not cover the electrical parts and the parts subject to
normal wear or deterioration due to external atmospheric or environmental
agents nor does it cover any defects arising from poor or insufficient
maintenance, nor does it cover the misuse of unqualified personnel,
unauthorised alterations or tampering of any kind.
•The validity of the warranty is subject to the performance of correct
maintenance as described in Chapter 7 “Maintenance” of this instruction
manual.
•The warranty is not valid if payment conditions have not been observed.
•If parts are supplied by some other manufacturer, he is responsible for the
warranty of these parts.
•Any controversy shall be governed directly by the court of Competent
Jurisdiction.
NOTE: In the event of repairs performed at the place where the machine is
installed, the machine guarantee certificate must be presented to the service
engineer and the guarantee is valid only if fully completed.
THE GUARANTEE WILL EXPIRE IN THE FOLLOWING CASES :
•Improper use of the machine ( see
I proper use pag. 9).
•se of different equipment from those specified in Chapter 7 “Maintenance”
•Assembly of the machine in different conditions from those specified in Chapter 4
“Installation”.
•Connections which fail to comply with the specifications given in Chapter 4 “
Installation”.
•se of non-original parts.
Instruction manual for spiral mixer mod. CPM80-200
8
REQUEST FOR SPARE PARTS
When requesting spare parts please state the following information :
•Type of machine
•No. Of production order marked on the label.
•Year of production.
•Reference number of the required part which can be found on the correspondent
drawing.
1.9
Use of the anual
Read carefully the following chapters : Charter 1 “ General information”, Charter 2
“Safety Information”, Chapter 3 “Machine specifications”, Chapter 5 “Operator
interface”. Consult the relevant charter before attempting installation, operation,
maintenance or dismantlement.
NOTE: This manual must be kept in good conditions for the whole life of the
machine and should be stored where it can be easily found when required. The
manual should be handed over to the purchaser of the machine if it is sold to someone
else.
Instruction manual for spiral mixer mod. CPM80-200
9
1.10
Description of the achine
INTENDED USE:
INTENDED OPERATIONS
The machine has been built and designed for cake and bread mixing to obtain shorter
working times.
The working cycle can be manual or automatic with two speeds and a premixing cycle,
all with timer.
CONDITIONS OF USE INTENDED
The machine has been designed and built to operate in a closed environment,
protected from atmospheric agents.
INTENDED USE OF POWER
The machine is driver by electric energy, which is converted into mechanical energy for
the intended operations.
IMPROPER USE
Improper use means any operation not expressly stated in the intended uses indicated
at the beginning of the paragraph, in particular :
•se of the machine in an explosive environment
•se of the machine in a flammable environment
•Washing the machine control panel with jets of water.
MACHINE STRUCTURE
This section describes the main machine components and their function within the
production cycle.
MAIN MACHINE COMPONENTS
The machine is composed of the following principal components :
•Body of the machine
•Mixing unit
•Transmission unit
•Electric panel
Instruction manual for spiral mixer mod. CPM80-200
10
Fig. 1.2 Main parts of the machine
Dieses Handbuch passt für folgende Modelle
11
Inhaltsverzeichnis
Andere CP Mischer Handbücher
