CPS FX1234 Bedienungsanleitung

FX1234 SERIES REFRIGERANT RECOVER

/ RECYCLE / VACUUM AND RECHARGE UNIT

OPERATION MANUAL

Models: FX1234 and FX1234V

Covered under US Patent

8,082,750 and other patents

pending.

Certied by ITS under

SAE J2911 to meet SAE

J2843_022013 for R-1234yf.

Certied by ITS under SAE

J2911 to meet high voltage

compressor service per SAE

J2843 for R-1234yf.

Table of Contents

Specications 2

General Safety 3

Icon Library 4-5

First Time Start Up 6

Theory of Operation 7-8

Other Functions 9

Maintenance and Care 10-11

Parts List and Warranty 11

A/C Database End-User License Agreement 12-13

Unit Consists Of:

Specications

• FX1234 Automotive Refrigerant Management Center

• Low and High side service hoses R-1234yf

• Low and High side R1234yf Service Couplings

• Tank Rell Adapter-Fits High side female for R-1234yf tank thread

• R-1234yf conversion ttings for hose storage and oil ush block

• 41 cubic Inch CPS lter drier (Replacement part number FX3030X1)

• 1 lb (454 gram) check weight

• Operation manual

• 1 Roll 2.25” x 50” Thermal Paper (Printer not included with FX1234V)

• Built-in Refrigerant Identier

End user to provide:

• Refrigerant oil and/or dye for injection system

• Refrigerant

FX1234 Specications

Power 115vac. 60Hz, 15a; 10” 12 gauge power cord

Compressor 12.67 CC Twin Cylinder Oil-less

Vacuum Pump 6 CFM, single stage

Gauges 3.5” Low side, 30 in/Hg to 250 psi; High Side, 0 to 600 psi

Hoses 120” barrier type

Refrigerant R1234yf

Storage Tank 30lb DOT with Heat Band (Heat Band optional on FX1234V)

Display 7” Touch Screen with 256 color graphical display

Printer 22mm heat transfer graphical (Optional on FX1234)

Construction Sheet metal frame adorned by injection and rotary molded plastic. Two handle bars, 4” front casters and 10” foam-lled rear tires for

exceptional maneuverability

Only qualied service personnel should operate this unit. Most states, countries, etc... may require the user to be licensed. Please check with

your local government agency.

DANGER – this unit’s recovery tanks contains liquid refrigerant. Overlling of a recovery tank may cause a violent explosion resulting in severe

injury or even death. Do not disable the overll safety features. Always make sure the correct tank is on the scale.

DANGER - Only use the recovery tanks provided with this unit. See distributor for replacement tanks.

DANGER - Avoid breathing refrigerant vapors and lubricant vapor or mist. Breathing high concentration levels may cause heart arrhythmia, loss

of consciousness, or even cause suffocation.

DANGER - Electrical shock hazard!!!! Always disconnect power source when servicing this equipment.

DANGER - DO NOT USE COMPRESSED AIR TO PRESSURE TEST OR LEAK TEST THE UNIT OR VEHICLE AIR CONDITIONING SYSTEM. Mixtures of air

and refrigerant are combustible at elevated pressures. These mixtures are potentially dangerous and may result in re or explosion causing

personal injury or property damage.

CAUTION - all hoses may contain liquid refrigerant under pressure. Contact with refrigerant may cause frostbite or other related injuries. Wear

proper personal protective equipment such as safety goggles and gloves. When disconnecting any hose, please use extreme caution.

CAUTION - avoid breathing refrigerant vapors and/or lubricant mist. Exposure may irritate eyes, nose, throat, and skin. Please read the

manufacturers Material Safety Data Sheet for further safety information on refrigerants and lubricants.

CAUTION - do not use this equipment in the vicinity of spilled or open containers of gasoline or other ammable substances. Make certain that

all safety devices are functioning properly before operating the equipment.

CAUTION- to reduce the risk of re, avoid the use of extension cords thinner than NO. 16 awg. (1,5mm2). The following table references

extension cord wire size vs. maximum length:

CAUTION- do not use this equipment in the vicinity of spilled or open containers of gasoline or other ammable substances. Make certain that all

safety devices are functioning properly before operating the equipment.

CAUTION- This equipment should be used in locations with mechanical ventilation that provides as least 4 air changes per hour.

CAUTION- RISK OF INJURY, the equipment should only be operated by certied personnel.

CAUTION- Use only CPS certied hose assemblies on this unit. The hose assemblies are made to proper length, contain shut offs where required

and have direct affect on the proper operation of this equipment.

CAUTION- R-1234yf is a Class A2L ammable refrigerant. Use in well ventilated areas. Minimize leakage from the unit. Periodically check unit for

leaks.

INTRODUCTION

GENERAL SAFETY

The CPS FX Series Refrigerant Management Centers are designed to revolutionize A/C equipment ease and endurance. From the seven inch 256

color touch screen display, to the patented and patent-pending oil-less compressor and motorized ball valves, we are condent the FX Series

equipment will quickly impress you with its ease of use and superior functionality.

There are many features built into the FX Series equipment. Below are the most noteworthy:

• A/C System Capacities Database—provides refrigerant/oil type and capacities for most vehicles sold in North America since 1994.

• Multiple Language Support—the FX series comes standard in English. Other languages will be made available and easily installed via an

SD card.

• Heated tank—to help reduce the times the vehicle AC system must be started in order to complete charging, we have added a tank heating

blanket to every FX machine.

• Care and Maintenance—the FX Series designers made ease of maintenance a priority. The vacuum pump oil drain and ll ports are

accessible from the outside — no disassembly is required. The refrigerant lter is located on top of the tank and machines Graphical User

Interface walks you through the lter replacement process.

CPS is pleased to bring to the automotive technician the many innovations commercial HAVC/R technicians have enjoyed for years. We hope you

will enjoy using your new FX Series Refrigerant Management Center.

Cord Gauge (awg) Cord Length (Ft)

16 10

14 20

12 25

ICON LIBRARY

ICON NAME DESCRIPTION IMAGE

AIR PURGE Tap to select AIR PURGE

AIR PURGE The AIR PURGE icon indicates that the

unit is purging air from the tank

AMERICAN Tap to select AMERICAN Units

BAR Tap to select BAR

BOTH COUPLERS Tap to select BOTH couplers

° C Tap to select CELSIUS

CALIBRATION Tap to select CALIBRATION

CHANGE TANK The CHANGE TANK icon noties the user

to change the tank

CHANGE UOM Tap to change the unit of measurement

CHARGE Tap to perform a CHARGE service

CHARGE

COMPLETE

Indicates that the CHARGE service is

COMPLETE

Charge Low Side Press to select Low Side Charging

CHECK SCALE

COMPLETE

The SCALE CHECK COMPLETE noties

users that a scale check is complete

Close Ball vale Press to close ball valve

CLOSE COUPLER

The CLOSE COUPLER icon noties

the user to close the coupler during a

recharge service

CLOSE HP Noties the user to CLOSE HP valve

during a CHARGE service

CLOSEVALVE Noties user to CLOSE VALVE

COMPLETE Indicates that a given operation is

COMPLETE

CONNECT HP Noties user to connect HP port during

tank rell

CPS FILTER CPS FILTER

DATABASE Tap to access the vehicle DATABASE

DISCONNECT

COUPLERS

Noties the user to DISCONNECT

COUPLERS

DRAIN OIL The DRAIN OIL icon noties the user

that oil is draining from the vehicle

ERROR Displays when there is an ERROR

° F Tap to select FARENHEIGHT

FAILED Indicates that a given operation FAILED

FILTER Displays the current status of the lter

life.

ICON NAME DESCRIPTION IMAGE

FILTER CHANGE Displays when a lter change is

required

FILTER CHANGE Tap to CHANGE FILTER

FULL CYCLE

COMPLETE

Indicates that the FULL CYCLE service

is COMPLETE

GRAMS Tap to select GRAMS as UOM

HELP Tap to launch the HELP Menu

HELP Provides Firmware version

HIGH COUPLER Tap to select the HIGH SIDE coupler only

HOME Tap to launch the HOME screen

INJECTION Noties the user to INJECT oil and/or

dye at this point in the service

INTERNATIONAL TAP to select INTERNATIONAL UOM’s

KGCM2 Tap to select KGCM2

KGS Tap to select KGS as UOM

KPA Tap to select KPA

LANGUAGE Tap to select LANGUAGE

LBS Tap to select LBS as UOM

LBS:OZ Tap to select LBS:OZ as UOM

LEAKCHECK Indicates that a LEAK CHECK is being

performed

LOW COUPLER Tap to select the LOW SIDE coupler only

MAINTENANCE Tap to launch the MAINTENANCE menu

MAINTENANCE

FILTER CHANGE Tap to CHANGE FILTER

MANIFOLD Tap to launch the MANIFOLD function

METRIC Tap to select METRIC UOM’s

MPA Tap to select MPA

NOT NOW Tap to postpone suggested operation

Open Ball Valve Press to Open Ball Valve

OZ Tap to select OZ as UOM

ICON LIBRARY

ICON NAME DESCRIPTION IMAGE

PLACE WEIGHT Noties user to PLACE WEIGHT on the

scale

PRINT Tap to PRINT a report of the service

PSIG Tap to select PSIG

PT Tap to select PRESSURE TRANSDUCER

PURITY PURITY

QUIT Tap to quit the current function

R1234yf Tap to select R1234yf Refrigerant

R134a Tap to select R134a Refrigerant

R22 Tap to select R22 Refrigerant

R407 Tap to select R407 Refrigerant

RECOVERY Tap to perform an RECOVERY service

RECOVERY

COMPLETE

Indicates that the RECOVERY service is

COMPLETE

REFRIGERANT REFRIGERANT

REFRIGERANT

CHANGE Tap to CHANGE REFRIGERANT

RELAY Tap to select RELAY

REMOVE WEIGHT Noties user to REMOVE WEIGHT from

scale

SAE Tap to select SAE

SAE CHARGE Tap to perform a SAE CHARGE service

SAE CHARGE

COMPLETE

Indicates that the SAE CHARGE service

is COMPLETE

SCALE Tap for SCALE functions

SCALE CHECK Tap to perform SCALE CHECK

SCALE CHECK The SCALE CHECK icon noties users

that a scale check is in progress

FULL

CALIBRATION Tap to perform full calibration

SCALE ZERO Tap to RE-ZERO the scale

SERVICE Tap to select SERVICE

SERVICE HOSES

BEING FLUSHED

Indicates that the SERVICES HOSES are

BEING FLUSHED

ICON NAME DESCRIPTION IMAGE

SET TIME Tap to SET TIME

SETTINGS Tap to launch the SETTINGS screen

SETUP Tap to launch the SEUP menu

SPEAKER Tap to enable sound

START AC Noties user to start vehicle and turn

on AC during service

TANK Indicates the level of refrigerant in the

TANK

TANK FULL Noties user that TANK is FULL

TANK HOSE

TANK REFILL Tap to perform a TANK REFILL

Tank Tare Setup Press to change tank weight and WC

TANKS REFILL

COMPLETE

Indicates that the TANK REFILL is

COMPLETE

TARE Tap to select TARE

TURN UPSIDE

DOWN

Noties user to TURN TANK UPSIDE

DOWN during tank rell

UNIT Tap to select UOM

UPDATE Tap to UPDATE

UPGRADE Tap to select UPGRADE

UPKEEP Tap to launch the UPKEEP menu

VACUUM Tap to perform a VACUUM service

VACUUM

COMPLETE

Indicates that the VACUUM service is

COMPLETE

VOLUME Tap to Choose VOLUME UOM

WARNING The WARNING icon appears to caution

users of a potential hazard

WEIGHT Tap to Choose WEIGHT UOM

ZERO Tap to RE-ZERO the pressure transducer

ZEROING Indicates that the unit is ZEROING

FIRST TIME START UP

1. Remove the black tank cover (cover not included on FX1234V) on the back of the unit by unscrewing the two thumb screws located on each

side of the cover. Remove the protective packaging from between the storage tank and the scale. See Figure A below.

Figure A: Shipping support to be removed before start up.

2. Plug the unit into the proper power source. Push the blue lighted power switch. All functions will be operated directly from the 7” Touch

Screen.

3. Connect service hoses to the machine.

4. Install oil purge bottle

Registration: To register your machine for warranty, please visit:

https://www.cpsproducts.com/support/equipment-warranty-registration/

5. Press the key to enter your shop information into your unit. This information will appear on certain screens and on print outs. Press-

ing will cause the unit to proceed with set up without personalizing your unit. Selecting will cause the unit to ask you later if you

want personalize your FX1234.

6. When personalization has been completed, press OK and the unit will proceed through self-calibration. When complete, the Home screen

will appear.

7. Select the Gear icon to enter mode to change the default language, Date/Time and units of measure. The FX1234 will allow you to

modify the weight unit of measure prior to entering the charge amount. This feature anticipates that the vehicle may be asking for a unit of

measure that is not your selected default.

8. Fill the internal storage tank. From the Home screen, select Connect the red high side hose to a virgin, or recycled refrigerant tank

using the supplied tank adapter. Refrigerant will be moved from the external tank to the internal tank in a liquid state. Therefore, a virgin

tank may be turned upside down, or if lling from a recycled tank, the hose may be connected to the “liquid” port. Follow the directions on

the FX display.

Congratulations, your FX Series Refrigerant Management Center is ready to use.

Note: Each time the machine is turned on it MUST be disconnected from a vehicle

THEORY OF OPERATION

FX Series Refrigerant Management Centers feature a touch screen graphical user interface that makes operation a breeze. In this section, we

will cover each operation and what the machine is actually doing. While the screen provides much of this information during operation, the

descriptions below will offer more detail than can be displayed.

Recovery

Select “Recovery” if you want to recover and recycle refrigerant currently in the vehicle prior to opening the system for repair. This process

will begin by checking the refrigerant in the vehicle system. If the refrigerant is at least 98% pure R1234yf, recovery will commence automati-

cally. If the refrigerant is less than 98% pure, the recovery function will not be allowed and the machine will vent the hoses to prevent internal

contamination of the machine and storage tank. Note: DO not connect service hoses to refrigerant source until instructed to do so.

The recovery process creates a vacuum on the vehicle system, pulling the refrigerant into a distillation chamber. The chamber has a coil inside

that is heated by compressor outlet gas. This process distills the refrigerant (turns it to gas) and separates liquids and debris from the refriger-

ant. The refrigerant passes through the chamber and compressor and is condensed into a liquid before coming to rest in the internal storage

tank.

The process ends when the machine detects that the system is void of refrigerant. The machine will display the amount recovered throughout

the process and at the end. The ending amount may be printed by pressing the icon visible on the Home screen after recovery is com-

pleted.

Vacuum

Select “Vacuum” if the vehicle system is void of refrigerant and is ready to be recharged. Evacuating the vehicle utilizes the FX Series’ 6 CFM

vacuum pump to pull air and boil moisture from the AC system. A specic vacuum time may be selected, or one of the preset times may be

used. If a vacuum time of 15 minutes or greater is selected, vacuuming will be followed by a 2 minute leak test (vacuum decay test).

Charge

Select “Charge” to rell the vehicle system to its designed capacity. Enter the desired charge amount. An A/C Database feature is built into the

FX1234, but will not have data available until 2016.

The charging sequence begins with a 10-minute vacuum leak test. This is an SAE requirement in SAE J2843 (R1234yf systems only). If the

system passes the vacuum leak test, the machine will charge the system to 15% of the selected charge. At this time, an electronic leak detector

meeting SAE J2913 for R1234yf is used to leak test the evaporator(s). After performing the leak test, the user will select the appropriate answers

to the displayed questions and proceed with charging. The FX1234 will continue allowing the remaining 85% of the charge. The FX1234 is

equipped with a heat blanket to assist in completing charging, but if the FX1234 cannot complete a charge due to pressure equalization, it will

notify the user to close the high side coupler and start the vehicle. This process will quickly complete the charge.

THEORY OF OPERATION

OTHER FUNCTIONS

Change Units

This function will be displayed when setting the charge amount. It allows

you to change from the defaulted unit of measure to that on the J639 tag

on the vehicle. For instance, the machine default was set to lbs:oz and the

vehicle tag provides refrigerant capacity in grams. Use this feature to

change the unit of measure to grams for this charge only.

Add Oil

This icon appears the end of the charge operation and is a reminder to add back the amount of oil that was removed during recovery. If you

had entered the amount of oil after charging, that amount will also appear with the icon. If not, check the oil discharge bottle to determine the

change in volume since the last recovery. Add this amount back to the system.

Full Cycle

Select “Full Cycle” to recover, recycle, vacuum, leak check and charge the vehicle AC system. The display will prompt you to enter the vehicle

charge amount. As in the “Charge” sequence, the database may be used to retrieve the charge amount for most vehicles sold in North America.

The full cycle process begins with a refrigerant purity test and the vehicle system. This is required for SAE2843 for R1234yf only. Note that if

you have purchased the FX1234W, you will need to have an external identier connected to the machines USB port at start up. If the system

passes the purity test, the machine will proceed with recovery.

The Full Cycle process continues after recovery with pre-charge vacuuming and leak testing. Leak testing is required under SAEJ2843 for

R1234yf systems. The system is rst vacuumed. After vacuuming, the 5-minute vacuum test is performed. If vacuum is held, the unit will pro-

ceed to adding 15% of the selected charge amount to the system. Using a SAE J2913 approved leak detector, inspect the evaporator(s) for leaks

and answer the displayed questions. If the system passes leak detection, the machine will continue charging the remaining 85%. If the leak

tests fail, the machine will recover any refrigerant and return to the Home screen. After the leak is repaired, the process can be run again. The

results may be printed by pressing the icon visible on the Home screen after Full Cycle is complete.

Tank Rell

Select “Tank Rell” to add refrigerant to the internal storage tank. It is suggested that at least 4.5 lbs or 2 kg of refrigerant be available in the

storage tank to begin any operation. If less is observed, choose this operation to add refrigerant to the internal tank. This operation transfers

refrigerant in the liquid state to the internal storage tank. The Refrigerant amount transferred in this mode is not counted toward the lter life.

Start with hoses disconnected and couplers closed. Press “Tank Rell” and follow the on screen instructions.

Caution: If hoses were connected be fore instructed, the machine will post a warning and instruct that the couplers be closed and the hoses

removed. Not doing so will result in refrigerant loss at the user’s expense.

OTHER FUNCTIONS

Car System Health Mode

This mode allows for checking of system pressures and vent temperature before and after servicing the AC

system. System parameters can be printed while in this mode to provide a before and after comparison.

When entering the Car Health mode, the machine will prompt you to start the AC system. You can then

collect and print readings. If you plan to recover next, press the button. You will be taken to the

Home screen. If all is well, press and the machine will guide you through clearing the hoses of

refrigerant back into the AC system.

Change Unit of Measure or Language

Press the maintenance icon and select . This will take you to a screen to allow you to select

either or .

Air Purge

The FX series features automatic air purge at unit start up. An air purge may also be selected in the maintenance mode. Air purges reduce “non-

condensable gases” in the storage tank to an acceptable level and may take a few minutes to complete. Do not turn the machine off or unplug

the unit during an Air Purge cycle.

Loading new Firmware

The latest FX rmware is online at https://www.cpsproducts.com/support/rmware-updates/

Select the brand and model and follow the instructions also available on this page.

Refrigerant ID

Pressing this icon enables the user to use the FX1234 as a refrigerant identier.

MAINTENANCE AND CARE

Filter Changes

The lter/dryer has the capacity to dry 150lbs of recovered refrigerant. A lter life monitor is displayed on the Home

screen. When indicated the lter must be changed.

To change the lter:

1. Remove the black plastic tank cover. Have the lter reset code available before proceeding. It comes with each

new lter.

2. On the display Press the key and select . Then select

3. Follow the displayed directions. Replace the black tank cover when completed.

Scale Maintenance

Use this mode to check, tare or calibrate the internal tank scale. To access “Scale Maintenance”, press the icon, then select

Select the desired function and follow the on screen instructions. To perform the “Test” mode, you will need to remove the black plastic tank

cover and then use the 1lb test weight included with the system. The Test mode will alert the user to the need to re-calibrate the scale.

A requires lifting the tank while operating the display. It is best to have two people available for and

Use to reset the empty tank weight to zero, thereby enabling indication of the refrigerant weight. Calibration is suggested only if the

calibration test was off by more than .02lbs. Calibration may be performed by a service center. CPS technical support can also assist with the

process. Calibration requires a certied 25lb weight.

Pressure Transducer Maintenance

Use this mode if you suspect that the internal pressure transducer readings are inaccurate. The internal pressure transducers are used during

recovery, vacuum, air purge and in the manifold mode.

To enter this mode, press the maintenance icon. Then select PT. This will allow the transducer to be set, or calibrated. Calibration will

require a certied pressure source of 180 psig. Setting zero requires removal of the system hoses.

Follow the displayed direction for the select transducer maintenance function.

High Pressure Alert

The FX1234 will alert the user should a high pressure condition exist on the outlet side of the compressor. When such a condition is detected,

the compressor will be turned off and not allowed to restart until the high pressure condition is remedied. In such case, check that the tank

valves and hose ball valves to the tank and lter are all open. If all valves are open, then contact technical support to determine the cause of the

alarm.

Tank Overll Limit

The FX Series’ 50lb internal storage tank is designed to contain a maximum of 38lbs of refrigerant. If this amount is exceeded, the user will

be alerted and system operations will be halted. Before normal operation can continue, the overll condition must be remedied by moving

refrigerant from the FX tank to another storage tank or into a vehicle AC system. The charge function may be used to transfer internally stored

refrigerant to an external storage facility.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CPS Steuerungssystem Handbücher

CPS

CPS FX134a Series Bedienungsanleitung

Beliebte Steuerungssystem Handbücher anderer Marken

Pentair Pool Products

Pentair Pool Products Compool Bedienungsanleitung

ComfortNET

ComfortNET CTK04 Bedienungsanleitung

Fireye

Fireye InSight II 95DSS3 Bedienungsanleitung

CAME

CAME G3000 Bedienungsanleitung

Idemia

Idemia MorphoAccess VP MD Bedienungsanleitung

Axis

Axis P1445-LE-3 Bedienungsanleitung

HEIDENHAIN

HEIDENHAIN TNC 150 B Bedienungsanleitung

CNC-Step

CNC-Step High-Z T-Series Bedienungsanleitung

Doosan

Doosan DVF Series Bedienungsanleitung

Honeywell

Honeywell KAP 140 Bedienungsanleitung

Honeywell

Honeywell vk41 series Bedienungsanleitung

AirBench

AirBench FPW Installationsanleitung

Cypress

Cypress HHR-3160 Bedienungsanleitung

CAME

CAME GLT40AOS Bedienungsanleitung

Zonex

Zonex GEN II -VVT Benutzerhandbuch

Altronics

Altronics K 9650 Bedienungsanleitung

micro-trak

micro-trak RoadMaster Bedienungsanleitung

micro-trak

micro-trak Calc-An-Acre II Bedienungsanleitung