Craftsman 13AC26JD293 Leitfaden

Remove the shoulder bolts and lock nuts

from the seat mounting bracket. Remove

the two self-tapping screws factory

installed on the tractor. Align the seat bracket in

place over the holes from where the self-tapping

screws were removed secure the seat bracket with

the self-tapping screws previously removed.

Slide the pedestal cap onto the steering shaft.

Remove the shoulder bolt and lock nut from the

steering shaft. Align the steering wheel so that

with the tractor wheels straight, the large opening on

the steering wheel is facing forward. Lower the steering

wheel assembly onto the lower steering shaft and secure

with shoulder bolt and lock nut. Remove the pedestal

cap mount screw factory installed and located on the

tractor’s steering console. Slide the Pedestal cap down

onto the tractor and slightly rotate to the right to clip

into place. Secure the pedestal with the screw.

Position the seat assembly over the seat mounting

bracket, aligning the holes provided. Install the two

shoulder bolts and lock nuts removed from the

seat mounting bracket.

Make sure that the deck chute/mulch

plug are properly installed and the safety

switch on the deck surface is depressed.

Note: The engine will not start if the safety switch

is not depressed.

PTO (Blade

Engage) Lever

Shift

Lever

Throttle

Control

Oil Fill /

Dipstick

Ignition

Switch

Brake

Pedal

Fuel Cap

READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.

PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY

AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING.

Need Help?

www.CRAFTSMAN.com or Call 1-888-331-4569

Fast Start Guide

Remove the two factory installed hex screws located

on the rear engine cover mounting bracket. Install

the rear engine cover. Tip the engine cover forward

to fit it into the slots provided, then rotate it backwards to

align the mounting holes. Secure the cover with the two

hex screws previously removed. Do not to over-tighten.

Remove the two screws, position the

bumper over the mounting holes and

secure using the two screws.

Insert the tractor key, place the PTO lever

in the disengaged (OFF) position, engage

the parking brake, activate the choke

control, turn the ignition key clockwise to the

START position. After the engine starts, release the

key. Deactivate the choke.

Fill fuel tank with clean, fresh gasoline. Do

not fill above the base of fuel tank neck.

PTO (Blade

Engage) Lever

Shift

Lever

Throttle

Control

Oil Fill /

Dipstick

Ignition

Switch

Brake

Pedal

Fuel Cap

READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.

PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY

AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING.

Need Help?

www.CRAFTSMAN.com or Call 1-888-331-4569

Fast Start Guide

Slide the hitch plate in between the frame

and the rear cover on your rider. When the

holes in the hitch plate and the frame are

aligned, install the two hex screws from the manual

bag up through the frame and into the hitch plate.

Securely tighten the hitch plate.

Attach the red cable to the positive (+) battery

terminal and attach the black cable to the negative

(–) battery terminal with the bolts and hex nuts.

Position the red rubber boot over the positive battery

terminal.

Andere Craftsman Rasenmäher Handbücher

Craftsman

Craftsman 917.377710 Bedienungsanleitung

Craftsman

Craftsman 917.273397 Bedienungsanleitung

Craftsman

Craftsman 917.376791 Bedienungsanleitung

Craftsman

Craftsman 486.37613 Bedienungsanleitung

Craftsman

Craftsman 917.273461 Bedienungsanleitung

Craftsman

Craftsman 25450 Bedienungsanleitung

Craftsman

Craftsman 917.370701 Bedienungsanleitung

Craftsman

Craftsman 917.376560 Bedienungsanleitung

Craftsman

Craftsman 247.203721 Bedienungsanleitung

Craftsman

Craftsman 917.376653 Bedienungsanleitung

Craftsman

Craftsman 917.376581 Bedienungsanleitung

Craftsman

Craftsman 917.388966 Bedienungsanleitung

Craftsman

Craftsman AUTOMATIC LAWN TRACTOR 917.27206 Bedienungsanleitung

Craftsman

Craftsman 917.372230 Bedienungsanleitung

Craftsman

Craftsman 917.388831 Bedienungsanleitung

Craftsman

Craftsman Sears 944.602892 Bedienungsanleitung

Craftsman

Craftsman EZ3 917.256543 Bedienungsanleitung

Craftsman

Craftsman 917.256501 Bedienungsanleitung

Craftsman

Craftsman 944.362460 Bedienungsanleitung

Craftsman

Craftsman 917.371682 Bedienungsanleitung

Craftsman

Craftsman 944.362631 Bedienungsanleitung

Craftsman

Craftsman 917.273505 Bedienungsanleitung

Craftsman

Craftsman 917.273710 Bedienungsanleitung

Craftsman

Craftsman 917.378210 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung