Craftsman 917.272262 Bedienungsanleitung

Owner's Manual

JCRRFTSMRN°J

25.0 HP

ELECTRIC START

48" MOWER

AUTOMATIC

LAWN TRACTOR

Model No.

917.272262

• Safety

•Assembly

• Operation

•Maintenance

• Repair Parts

CAUTION:

Read and follow all

Safety Rules and Instructions

before operating this equip-

ment.

For answers to your questions

about this product, Call:

1-800-659-5917

Sears Craftsman Help Line

5 am- 5 pm, Mort- Sat

Sears, Roebuck and Co., Hoffman Estates, IL 60179

Visit our Craftsman website: www.sears.com/craftsman

Warranty ............................................... 2

Safety Rules ......................................... 3

Product Specifications .......................... 6

Assembly .............................................. 8

Operation ............................................ 12

Maintenance Schedule ...................... 18

Maintenance ....................................... 18

Service and Adjustments .................... 23

Storage ............................................... 29

Troubleshooting ................................. 30

Repair Parts........................................ 34

Parts Ordaring ..................... Back Cover

LIMITED TWO YEAR WARRANTY ON CRAFTSMAN RIDING EQUIPMENT PARTS

For two (2) years from the date of purchase, ifthis Craftsman Riding Equipment is

maintained, lubricated and tuned up according to the instructions in the owner's

manual, Sears will repair or replace, free of charge, any parts found to be defective in

matedal or workmanship. Warranty service is available free of charge by returning

your Craftsman dding equipment to your nearest Sears Service Center. In-home

warranty service is available but a tdp charge will apply. This warranty applies only

while this product isin the United States.

This Warranty does not cover:.

• Expendable items which become worn dudng normal use, such as blades, spark

plugs, air cleaners, belts and oil filters.

• Tire replacement or repair caused by punctures from outside objects, such as nails,

thorns, stumps, or glass.

•Repairs necessary because of operator abuse, including but not limitedto, damage

caused by towing objects beyond the capability of the ddlng equipment, impacting

ob ects that bend the frame or crankshaft, or over speeding the engine.

•Repa rs necessary because of operator negligence, includingbut not limited to,

electdcal and mechanical damage caused by improper storage, failure to use the

proper grade and amount of engine oil, failure to keep the deck clear of flammable

debds, or the failure to maintain the equipment according to the instructions

contained in the owner's manual.

•Engine (fuel system) cleaning or repairs caused by fuel determined to be contami-

nated or oxidized (stale). In general, fuel should be used within thirty (30) days of its

purchase date.

•Riding equipment used for commercial or rental purposes. A productis =used for

commercial purpose" it is used for any purpose other than single family household

dwellings or in usage where profit is made.

LIMITED 90 DAY WARRANTY ON BA'R'ERY

For ninety (90) days from date of purchase, if any battery included with this dding

equipment proves defective in matedal or workmanship end our testing determines

the battery willnot hold a charge, Sears will replace the battery at no charge. War-

ranty service is available free of charge by retuming your Craftsman dding equipment

to your nearest Sears Service Center. In-home warranty service Is available but a tdp

charge will apply. This warranty applies only while this product is in the United States.

TO LOCATE THE NEAREST SEARS SERVICE CENTER OR TO SCHEDULE IN-

HOME WARRANTY SERVICE, SIMPLY CONTACT SEARS AT 1-800-4-MY-HOME

This Warranty givesyou specific legal dghts, and you may also have other dghts

whichmay varyfrom stateto state.

Sears, Roebuck and Co., D/617 WA, Hoffman Estates, IL 60179

IMPORTANT: This cutting machine is capable ofamputating hands and feet and

throwingobjects. Failure to observe the following safety instructionscould result in

serious injury or death.

I.GENERAL OPERATION

•Read, understand,and follow all

instructions in the manual and on the

machine before starting.

• Only allow responsible adults,who are

familiarwiththe instructions,to operate

the machine.

• Clear the area of objectssuchas rooks,

toys,wire, etc., whichcouldbe picked

up and thrownby the blade.

• Be surethe area is clear of other people

before mowing. Stop machine if anyone

entersthe area.

•Never carry passengers.

•Do not mow in reverse unless absolutely

necessary. Always look down and

behind before and while backing.

• Be aware of the mower discharge

direction and do not point it at anyone.

Do not operate the mower withouteither

the entire grass catcher or the guard in

place.

• Slow down before tuming.

•Never leave a runningmachine

unattended. Alwaysfum off blades, set

parking brake, stop engine, and remove

keys before dismounting.

•Turn off blades when net mowing.

•Stop engine before removing grass

catcher or uncloggingchute.

•Mow only in daylightor good artificial

light.

•Do not operate the machine while under

the influenceof alcohol or drugs.

•Watch for traffic when operating near or

crossing roadways.

•Use extra care when loading or unload-

ingthe machine intoa trailer or truck.

•Data indicatesthat operators, age 60

years and above, are involvedin alarge

pementage of ridingmower-related

injudas. These operators should

evaluate their abilityto operate the riding

mower safelyenough to protectthem-

selves and othersfrom serious injury.

•Keep machinefree of grass, leaves or

other debris build-upwhich can touch

hot exhaust/engineparts end bum. Do

not allow the mower deck to plow leaves

or other debriswhich can cause build-

upto occur. Clean any oil or fuel

spillage before operatingor storing the

machine. Allow machine tocool before

storage. 3

II. SLOPE OPERATION

Slopes are a majorfactor related toloss-of-

control and tipoveraccidents,whichcan re-

suit in severe injuryor death. All slopes

requireextra caution. Ifyou cannotbeck up

the slope or ifyou feel uneasyon it, do not

mow it.

DO:

• Mow upend down slopes, notacross.

•Remove obstaclessuch as rocks,tree

limbs,etc.

Watch for holes, ruts,or bumps. Uneven

terrain could overturnthe machine. Tall

grass can hide obstacles.

Use slow speed. Choose alow gear so

that youwillnot have tostop orshift

while on the slope.

Followthe manufacturer'srscommenda.

tions for wheel weights or counter-

weights to improve stability.

Use extra care with grasscatchersor

other attachments. These can change

the stabirdyof the machine.

Keep all movement on the slopes slow

and gradual. Do not make sudden

changes in speed or direction.

Avoidstarting or stopping on a slope. If

tireslose traction, disengagethe blades

and pmcaed slowly straightdownthe

slope.

DO NOT:

• Do not fum on slopes unlessnecessary,

and then, turn slowlyand gradually

downhill,if possible.

•Do notmow near drop-offs,ditches,or

embankments. The mower could

suddenlyturn over if a wheal is over the

edge of a cliffor ditch,or If an edge

caves in.

• Do notmow on wet grass. Reduosd

traction could cause sliding.

•Do not try to stabilizethe machine by

putting your foot on the ground.

•Do netuse grass catcher on steep

slopes.

IlL CHILDREN

Tragic accidentscan occur if the operator

is not alertto the presenca of children.

Childrenare often attracted tothe

machine and the mowing activity. Never

assume that children wiif remain where

you last saw them.

• Keep children out of the mowing area

and under the watchful care of another

responsible adult.

• Be alert and turn machine off if children

enter the area.

•Before and when backing, look behind

and down for small children.

•Never carry children. They may fall off

and be seriously injured or interfere

with safe machine operation.

•Never allow children to operate the

machine.

•Use extra care when approaching blind

comers, shrubs,trees, or other objects

that may obscure vision.

IV. SERVICE

•Use extra care in handling gasoline

and other fuels. They are flammable

and vapors are explosive.

-Usa only an approved container.

-Never remove gas cap or add fuel

with the engine running. Allow

engine to cool before refueling. Do

not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel

container inside where there is an

open flame, such as a water heater.

•Never run amachine inside aclosed

area.

•Keep nuts and bolts, especially blade

attachment bolts, tight and keep

equipment in good condition.

•Never tamper with safety devices.

Check their proper operation regularly.

•Keep machine free of grass, leaves, or

other debds build-up. Clean oilor fuel

spillage. Allow machine to cool before

storing.

•Stop and inspectthe equipment it you

stdke an object. Repair, if necessary,

before restarting.

•Never make adjustments or repairs

with the engine running.

•Grass catcher components are subject

to wear, damage, and deterioration,

which could expose moving parts or

allow objects to be thrown. Frequently

check components and replace with

manufacturer's recommended parts,

when necessary.

•Mower blades are sharp and can cut.

Wrap the blade(s) or wear gloves, and

use extra caution when servicingthem.

•Check brake operation frequently.

Adjust and service as required.

•Be sure the area is clear of other

people before mowing. Stop machine if

anyone enters the area.

• Never carry passengers or children

even with the blades off.

•Do not mow in reverse unless abso-

lutely necessary. Always look down

and behind before and while backing.

•Never carry children. They may fall off

and be seriously injured or interfere

with safe machine operation.

•Keep children out of the mowing area

and under the watchful care of another

responsible adult.

•Be alert and turn machine off if children

enter the area.

•Before and when backing, look behind

and down for small children.

•Mow up and down slopes (15° Max),

not across.

•Remove obstacles suchas rocks, tree

limbs, etc.

•Watch for holes, ruts, or bumps.

Uneven terrain could overturn the

machine. Tall grass can hide obstacles.

•Use slow speed. Choose a low gear so

that you willnot have to stopor shift

while on the slope.

•Avoid startingor stoppingon a slope. If

tires lose traction, disengage the

blades and proceed slowly straight

down the slope.

•If machine stops while going uphill,

disengage blades, shift into reverse

and back down slowly.

•Do not turn on slopes unless neces-

sary, and then, turn slowly and gradu-

ally downhill, if possible.

_!l=Look for this symbol to point out

importantsafety precautions. It means

CAUTIONI!! BECOMEALERTlil YOUR

SAFETY ISINVOLVED.

_,CAUTION: In orderto prevent

accidental starting when setting up,

transporting, adjusting or making repairs,

always disconnect spark plug wire and

place wire where it cannot contactspark

plug.

_CAUTION: Do not coast down a hill in

neutral, you may lose control of the

tractor.

_CAUTION: Tow onlythe attachments

that are recommended by and comply

with specifications of the manufacturer of

your tractor. Use common sense when

towing. Operate only at the lowest

possiblespeed when on a slope. Too

heavy of a load, while on a slope, is

dangerous. Tires can lose traction with

the ground and cause you to lose control

ofyour tractor.

_WARNING: Engine exhaust, soma of

its constituents, and certain vehicle

components contain or emit chemicals

known to the State of California to cause

cancer and birthdefects or other repro-

ductive harm.

_IbWARNING: Battery posts,terminals

and related accessories contain lead and

lead compounds, chemicals known to the

State of California to cause cancer and

birth defects or other reproductive harm.

Wash hands after handitng.

PRODUCTSPECIFICATIONS

;ASOLINE 3.5GALLONS

;APACITY UNLEADED

_NDTYPE: REGULAR

:_ILTYPE SAE 30

(ABOVE 32°F)

I_API-SF-SJ): SAE 5W-30

(BELOW 32°F)

OILCAPACITY: W/FILTER: 4.0 PINTS

W/ORLTER: 3.75 PINTS

SPARKPLUG: CHAMPION RC12YC

SAP: .040")

GROUND SPEED FORWARD: 0-5.5

(MPH): REVERSE: 0-2.4

TIRE PRESSURE: FRONT: 14PSI

REAR: 10 PSI

CHARGING

SYSTEM: 16 AMPS @3600 RPM

BATTERY: AMP/HR: 30

MIN. CCA: 240

CASE SIZE: Ul R

BLADE BOLT 45-55 FT. LBS.

TORQUE:

CONGRATULATIONS on your purchase

of a new tractor. It has been designed,

engineered and manufactured to give you

the best possible dependability and

performance.

Should you experience any problem you

cannot easily remedy/,please contact a

Sears or other qualifrsd service center.

We have competent, well-trained techni-

ciansand the proper tools to service or

repair this tractor.

Please read and retain this manual. The

instructionswill enable you to assemble

and maintain your tractor properly. .

Always observe the SAFETY RULES.

REPAIR AGREEMENT

A Repair Agreement is available on this

product. Contact your nearest Sears

store for details.

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow aregular schedule in maintain-

ing, caring for and using your tractor.

•Follow the instructions under =Mainte-

nance" and =Storage" sections of this

owner's manual.

A,WARNING: This tractor is equipped

with an internal combustion engine and

should not be used on or near any

unimproved forest-covered, brush.

covered or grass-covered land unless the

engine's exhaust system is equipped with

aspark arrester meeting applicable local

or state laws (if any). If e spark arrester is

used, it should be maintained in effective

working order by the operator.

In the state of California the above is

required by law (Section 4442 ofthe

Califomia Public Resources Code).

Other states may have similarlaws.

Federal laws apply on federal lands. A

spark arrester for the muffler is available

through your nearest Sears service

center (See REPAIR PARTS sectionof

this manual).

Steering Wheel

Steering

Wheel Insert Steering Sleeve

Seat

(1)w_

17/32x 1-3/16x 12Gauge

_(1) Knob

Mower

Retainer Springs

)

(2) Retainer Springs (single loop)

(2)Flanged j_O

(1)FrontPlate _"

(4) Adjusting Bar Gauge Wheels

_(4)Retainer Springs _,---_ I

_ _ ); __(double loop) (4) Clevis Pinsw

(4)gc ;ut

'_/(4)Wheels (4)Washers _."_"/_/ _-J'(4) ShoulderBo'_"

3/8 x 3/4 x 14 Ga:'_=, _

I m Nose Roller '_1

I_0) Nose Rotler

Nose Rolle_ _(2

(2) Hex Bolts

(2) Locknuts =;/tR tRv 1 ) Washer

.... "..... 17/32 x 7/8 x 16 GaY5/16-18

Video Cassette Keys

_(2) Keys

(;JrOFlluDrlai_j:ube

Slope Sheet

Yournewtractorhas been assembled at the factory with exception ofthose parts left

unassembled for shipping purposes. To ensure Safe and proper operation ofyour

tractor all partsand hardware you assemble must be tightened securely. Use the

correct tools as necessary to insure propertightness. Review the video cassette before

you begin.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly

easier. Standard wrench sizes you need

are listed below.

(1) 9/16" wrench (1) 3/4" Socket w/

(1) 1/2=wrench ddve ratchet

(1) Utility knife (1) Pliers

(1) "[]repressure gauge

When rightor left hand is mentioned in

this manual, it means, from your point of

view, when you are in the operating

position (seated behind the steedng

wheel).

TO REMOVE TRACTOR FROM

CARTON

UNPACK CARTON

1, Remove all accessible loose parts

and partscartons from carton.

2. Cut, from top to bottom, along lines on

ell four comers of carton, and lay

panels flat.

3. Remove mower and packing materi-

als.

4, Check for any additional loose parts

or cartons and remove.

BEFORE REMOVING TRACTOR

FROM SKID

ATrACH STEERING WHEEL

1. Remove hax nut and large flat washer

from steedng shaft.

2. Positionfront wheels of the tractor so

they are pointingstraight forward.

3. Slide the steering sleeve over the

steering shaft.

4. Position steering wheel so cross bars

are horizontal (left to right) and slide

onto steering wheel adapter.

5, Secure steedng wheel to steering

shaft with hex nut and large flat

washer previously removed. Tighten

securely.

6. Snap steering wheel insert into center

of steering wheel.

7. Remove protective materials from

tractor hood and grill.

IMPORTANT: Check for end remove any

staples in skid that may puncture tires

where tractor is to roll off skid.

__...__.._Steedng

wheelIr ort

II i.l<.

Stesdng (tJ _J )

Wheel_

StsedngWheel _._

Adapter/_1_

SteeringShaft_ #" ~'_'-_-'_._'.",,

•/!__ (_'1[_ji: i ill

Sleeve---------'7_,,,._='_:_,vJ ,'J 1.

../ IIH

HOW TO SET UP YOUR TRACTOR

CHECK BA'I'rERY

1. Lift hood to raised position.

NOTE: Ifthis batteryisput intoservice

after month and year indicated on label

(label located between terminals) charge

battery for minimum of one hourat 6-10

amps. (See "BA'I-I'ERY" in Maintenance

section of this manual for charging

instructions),

--._;.-]....- ----:,

INSTALL SEAT

Adjust seat before tightening adjustment

knob.

1, Remove adjustment knob and flat

washer securing seat to cardboard

packing and set aside for assembly of

seat totractor.

2. Pivot seat upward and remove from

the cardboard packing. Remove the

cardboard packing and discard.

3. Place seat on seat pan so head of

shoulder bolt is positioned over large

8 slotted hole in pan.

4. Pushdownonseattoengage

shoulderboltinslotandpullseat

towardsrearoftractor.

5. Pivotseatandpanforwardand

assembleadjustmentknobandflat

washerloosely.Donottighten.

6. Lowerseatinto operating position and

sit in seat.

7. Slide seat untila comfortable position

is reached which allows you to press

clutcWorake pedal all the way down.

8. Get off seat withoutmoving its

adjusted position.

8. Raise seat and tighten adjustment

knob securely.

Shoulder

Bolt

Flat

NOTE: You may now rollor drive your

tractor off the skid. Follow the appropriate

instruction below to remove the tractor

from the skid.

TO ROLLTRACTOR OFF SKID (See

Operation section for location and

function of controls)

1. Press liftlever plunger and raise

attachment lift lever to its highest

position.

2. Release parking brake by depressing

brake pedal.

3. Place freewheel control in freewheel-

ing positionto disengage transmis-

sion (See '1"O TRANSPORT' in the

Operation section of this manual).

4. Roll tractor forward off skid.

TO DRIVE TRACTOR OFF SKID (See

Operation section for location and

function of controls)

WARNING: Before starting,read,

understand and follow all instructionsin

the Operation section ofthis manual. Be

sure tractor is in a well-ventilated area. Be

sure the area in front of tractor is clear of

other people and objects.

1. Be sure all the above assembly steps

have been completed.

2. Check engine oil level and fill fuel

tank with gasoline.

3. Place freewheel control in 'lransmis-

sion engaged" position.

4. Sit on seat in operating position,

depress brake pedal and set the

parking brake.

5. Press liftlever plunger and raise

attachment liftlever to its highest

position.

6. Start the engine. After engine has

started, move throttlecontrolto idle

position.

7. Release parking brake.

8. Slowly depress forward drive pedal

and ddve tractor offskid.

9. Apply brake to stop tractor and set

parking brake.

10.Turn ignitionkey to "OFF"position.

Continue with the instructionsthat follow.

ASSEMBLE GAUGE WHEELS TO

MOWER DECK

The gauge wheels are designed to keep

the mower deck in proper position when

operating mower. Be sure they are

propedy adjusted to ensure optimum

mower performance.

1. Slide gauge wheel bar down into

bracket channel, Be sure that gauge

wheel bar aligning holes are on top.

Assemble gauge wheels as shown

using shoulder bolts. 3/8 washers and

3/8-16 center Iocknutsand tighten

securely.

2. For ease of mower to tractor assem-

bly, raise gauge wheels to highest

position and retain with clevis pins

and spdng retainers.

NOTE: Adjust gauge wheels before

operating mower. See "TO ADJUST

GAUGE WHEELS" inthe Operation

section of this manual.

RetainerSpring__ / F/._C

ou,°or

Gauge _' I<T_ I'1

Wheel_ I /3/8-16 Center

3/8 Washer-/" v _ Locknut

TOATTACHNOSEROLLER

1. Positionbrackets,17/32x7/8x16

gaugewashers,and nose roller

between deck mounting brackets as

shown. Be sure to position brackets

on correct side, as shown.

2. Install hax bolls and lock nuts as

shown. Tighten hardware securely.

NOTE: Be sure bracket tabs are posi-

tioned in tab holes in deck brackets.

Nose Roller

_\ Lock

Nut •"B"Bracket

INSTALL MOWER AND DRIVE BELT

Besuretractorison levelsurface andmower

suspensionarms are raised withattachment

liftcontrol.Engageparkingbrake.

1. Cut and remove ties securing anti-

sway bar and bells. Swing anti-sway

bar to [eft side of mower deck.

2. Slide mower under tractor with

deflectorshield to right side of tractor.

IMPORTANT: Check bell for proper

routingin all mower pulley grooves.

3. If equipped, turn height adjustment

knob counterclockwise untilit stops.

4. Lower mower linkage with attachment

lift control.

5. Be sure bell tension rod is in disen-

gaged position.

Be_tTension Rod

Chassis Bracket

Gauge

Wheet

Double Loop

Retainer Spring,

Anti-Swa_

USEPLIERSFOR I

RETAINERSPR[NGS Suspension Arms

I/_L_p Double Loop Retainer

Spring (Outward

Up pointing deck pins)

6. Install bell into electric clutch pulley

groove.

7. Place the suspension arms on

outward pointing deck pins. Retain

with double loop retainer spring with

loops up as shown.

8. Install front plate assembly to tractor

suspension brackets and retain with

single loop retainer springs as shown.

9. Position front plate assembly between

front mower brackets. Raise deck and

plate assembly to align holes and

insert flanged pins. Secure pins with

double loop retainer springs between

the plate assembly and mower

brackets.

NOTE: Toassist in locating hole in

flanged pin, the hole in pin is inlina with

notch on head of pin. If necessary, move

side-to-side to give space between plate

and mower brackets.

IMPORTANT: Check belt for proper

routingin all mower pulley grooves.

10.Engage bell tension rod by pushing

rod into lockingbracket.

_kCAUTION: Bell tension rod isspring

loaded. Have a tight grip on rodand

engage slowly.

11.Connect anti-sway bar to chassis

bracket under left footrest and retain

with double loop retainer spring.

12.If equipped, turn height adjustment

knob clockwiseto remove slack from

mower suspension.

13.Raise deck to highest position.

14.Adjust gauge wheels before operating

mower as shown in the Operation

section ofthis manual.

Electdc Clutch

Pulley\ Front Suspention Brackets

Front Front Plate Assembly

Mower \ _Double Loop

Bracket Retainer Springs

Single

Loop

Retainer

Springs

10 Sheild

Inhaltsverzeichnis

Andere Craftsman Rasenmäher Handbücher

Craftsman

Craftsman 917.27624 Bedienungsanleitung

Craftsman

Craftsman 3One 917.382781 Bedienungsanleitung

Craftsman

Craftsman 917.370412 Bedienungsanleitung

Craftsman

Craftsman 917.375503 Bedienungsanleitung

Craftsman

Craftsman 917.270823 Bedienungsanleitung

Craftsman

Craftsman 917.254460 Bedienungsanleitung

Craftsman

Craftsman 917.388113 Bedienungsanleitung

Craftsman

Craftsman 917.371720 Bedienungsanleitung

Craftsman

Craftsman 917.376723 Bedienungsanleitung

Craftsman

Craftsman 917.374544 Bedienungsanleitung

Craftsman

Craftsman EZ3 917.377261 Bedienungsanleitung

Craftsman

Craftsman 917.388106 Bedienungsanleitung

Craftsman

Craftsman 917.271062 Bedienungsanleitung

Craftsman

Craftsman 917.28803 Bedienungsanleitung

Craftsman

Craftsman 917.376544 Bedienungsanleitung

Craftsman

Craftsman CMXGMAM2703841 Bedienungsanleitung

Craftsman

Craftsman 917.370604 Bedienungsanleitung

Craftsman

Craftsman 25336 Bedienungsanleitung

Craftsman

Craftsman 247.288843 Bedienungsanleitung

Craftsman

Craftsman C459-36100 Bedienungsanleitung

Craftsman

Craftsman 917.256561 Bedienungsanleitung

Craftsman

Craftsman T1000 series Bedienungsanleitung

Craftsman

Craftsman 917.28821 Bedienungsanleitung

Craftsman

Craftsman 247.38917 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung