Craftsman 917.275010 Bedienungsanleitung

Owner's Manual

ICRRFTSMRN*I

23 HP

ELECTRIC START

48" MOWER

6 SPEED

GARDEN TRACTOR

Model No,

917.275010

• Safety

•Assembly

•Operation

•Maintenance

•Repair Parts

CAUTION:

Read and follow all Safety

Rules and Instructions before

operating this equipment.

For answers to your questions

about this product, Call:

1-800-659-5917

Sears Craftsman Help Line

5 am -5 pro, Mon-Sat

SEARS, ROEBUCKAND CO., HOFFMAN ESTATES, ]L60179

VisitourCraftsmanwebsite:www.sears.com/craftsman

Warranty ............................................... 2

Safety Rules ......................................... 3

Product Specifications.......................... 6

Assembly .............................................. 9

Operation ............................................ 12

Maintenance Schedule ...................... 19

Maintenance ....................................... 18

Service and Adjustments.................... 22

Storage ............................................... 29

Troubleshooting ................................. 30

Repair Parts........................................ 34

Parts Ordedng ..................... Back Cover

LIMITED TWO YEAR WARRANTY ON CRAFTSMAN RIDING EQUIPMENT PARTS

For two (2) years from the date of purchase, if this Craftsman Riding Equipmentis

maintained, lubdcated and tuned up according to the instructionsin the owner's

manual, Sears will repair or replace, free of charge, any parts found to be defective in

matedal or workmanship. Warranty service is available free of charge by returning your

Craftsman dding equipment toyour nearest Sears Service Center. In-home warranty

service is available but a tdp charge will apply. This warranty applies onlywhile this

productisin the United States.

This Warranty does not sever:

• Expendable items which become worn dudng normal use, such as blades, spark

plugs, air cleaners, belts and oil filters.

• Tire replacement or repair caused by punctures from outside objects, such as nails,

thorns, stumps,or glass.

•Repairs necessary because of operator abuse, including but not limited to, damage

caused by towing objects beyond the capability of the dding equipment, impacting

objects that bend the frame or crankshaft, or over speeding the engine.

•Repairs necessary because of operator negligence, includingbut net limited to,

electdcal and mechanical damage caused by improper storage, failure to use the

proper grade and amount of engine oil, failure to keep the deck clear offlammable

debds, or the failure to maintain the equipment accordingto the instructionscon-

tained in the owner's manual.

•Engine (fuel system) cleaning or repairs caused by fuel determined to be contami-

nated or oxidized (stale). In general, fuel should be used withinthirty (30) days of its

purchase date.

•Riding equipment used for commercial or rental purposes. A productis =used for

commercial purpose" if is used for any purpose other than single family household

dwellingsor in usage where profitis made.

LIMITED 90 DAYWARRANTY ON BATTERY

For ninety (90) days from date of purchase, if any battery included with this dding

equipment proves defective in matedal or workmanship and our testing determines the

batterywill not hold a charge, Sears will replace the battery at no charge. Warranty

service is available free of charge by returning your Craftsman dding equipment to

your nearest Sears Service Center. In-home warranty service is available but atrip

charge will apply. This warranty applies only while this product is in the United States.

TO LOCATE THE NEAREST SEARS SERVICE CENTER OR TO SCHEDULE IN-HOME

WARRANTY SERVICE, SIMPLY CONTACT SEARS AT 1-800-4-MY-HOME

This Warranty gives you specificlegal dghts, and you may also have other dghts which

may vary from state to state.

Sears, Roebuck and Co., D/817 WA, Hoffman Estates, IL 60179

IMPORTANT:Thiscuttingmachineiscapableofamputatinghandsandfeetand

throwing,objects.Failuretoobservethefollowing safety instructionscoeld result in

sedous injury or death.

I. GENERAL OPERATION

•Read, understand, and follow all

instructionsin the manual and on the

machine before starting.

•Only allow responsible adults, who are

familiar with the instructions,to operate

the machine.

•Clear the area of objects such as

rocks, toys,wire, etc., whichcould be

picked up and thrown by the blade.

• Be sure the area isclear of other

people before mowing. Stop machine

if anyone enters the area.

•Never can'y passengers.

•Do not mow in reverse unless abso-

lutely necessary, Always look down

and behind before and while backing.

• Be aware of the mower discharge

directionand do not point itat anyone.

Do not operate the mower without

either the entire grass catcher or the

guard in plane.

•Slow down before turning.

•Never leave a running machine

unattended. Always turn off blades, set

parking brake, stop engine, and

remove keys before dismounting.

•Turn off blades when not mowing.

•Stop engine before removing grass

catcher or unclogging chute.

•Mow only in daylight or good artificial

light.

•Do not operate the machine while

under the influence of alcohol or drugs.

•Watch for traffic when operating near or

crossing roadways.

•Use extra care when loading or

unloading the machine into a trailer or

truck.

•Data indicates that operators, age 60

_/aearsand above, are involved in a

rge percentage of dding mower-

related injudes. These operators

should evaluate their ability to operate

the dding mower safely enough to

protectthemselves and others from

sedous in ury.

•Keep mach ne free of grass, leaves or

other debds build-up which can touch

hotexhaust /engine parts and bum. Do

not allow the mower deck to plow

leaves or other debds which can cause

build-upto occur. Clean any oil or fuel

spillage before operating or storing the

machine. Allow machine to cool before

storage.

II. SLOPE OPERATION

Slopes are a majorfactor related to loss-of-

control and tipover accidents, which can

result in severe in ury or death. All slopes

requ re extra caut on. fyoucannot back up

the slope or if you feel uneasy on it, do not

mow it.

DO:

•Mow up and down slopes, not across.

•Remove obstacles such as rocks, tree

limbs,etc.

•Watch for holes, ruts, or bumps.

Uneven terrain could overturn the

machine. Tall grass can hide ob-

stacles.

•Use slow speed. Choose a low gear

so that you will not have to stop or shift

while on the slope.

•Follow the manufacturer's recommen-

dationsfor wheel weights or counter-

weights to improve stability.

•Use extra care with grass catchers or

other attachments. These can change

the stabilityof the machine.

•Keep all movement on the slopes slow

and gradual. Do not make sudden

changes in speed or direction.

•Avoid startingor stoppingon a slope. If

tires lose traction, disengage the

blades and proceed slowly straight

down the slope.

DO NOT:

• Do not tum on slopes unless neces-

sary, and then, turn slowlyand gradu-

ally downhill, if possible.

•Do nat mow near drep-offs, ditches, or

embankments. The mower could

suddenly turnover if a wheel is over

the eddieof a cliff or ditch,or if an edge

caves In.

•Do notmow on wet grass. Reduced

traction could cause sliding.

•Do not try to stabilizethe machine by

putting your foot on the ground.

•Do not use grass catcher on steep

slopes.

III.CHILDREN

Tragicaccidentscanoccuriftheoperator

isnot alert tothe pmsanca ofchildren.

Children ere often attracted to the

machine and the mowing activity. Never

assume that children will remain where

you last saw them.

•Keep children out of the mowing area

and under the watchful care of another

responsible aduif.

•Be alert and turn machine off if children

enter the area.

• Before and when backing, look behind

and down for small children.

• Never carry children. They may fall off

and be sariously injured or interfere

with safe machine operation.

•Never allow children to operate the

machine.

•Use extra care when approaching blind

comers, shrubs, trees, or other objects

that may obscure vision.

IV. SERVICE

•Use extra care in handling gasoline

and other fuels. They are flammable

and vapors are explosive.

-Use only an approved container.

-Never remove gas cap or add fuel

with the engine running. Allow

engine to cool before refueling. Do

not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel

container inside where there is an

open flame, such as a water heater.

•Never run amachine inside a closed

area.

•Keep nuts and bolts, especially blade

attachment bolts, tightand keep

equipment in good condition.

•Never tamper with safety devices.

Check their proper operation regularly.

•Keep machine free of grass,leaves, or

other debds build-up. Clean oil or fuel

spillage. Allow machine to cool before

storing.

•Stop and inspect the equipment ifyou

strike an object. Repair, if necessary,

before restarting.

•Never make adjustments or repairs

with the engine running.

•Grass catcher components are subject

to wear, damage, and deterioration,

which could expose moving parts or

allow objects to be thrown. Frequently

check components and replace with

manufacturer's recommended pads,

when necessary.

•Mower blades are sharp and can cut.

Wrap the blade(s) or wear gloves, and

use extra caution when servicingthem.

•Check brake operation frequently.

Adjust and service as required.

• Be sure the area isclear of other

people before mowing. Stop machine if

anyone enters the area.

•Never carry passengers or children

even with the blades off.

•Do notmow in reverse unless abso-

lutely necessary. Always look down

and behind before and while backing.

•Never carry children. They may fall off

and be seriously injured or interfere

with safe machine operation.

•Keep children out of the mowing area

and under the watchful care of another

responsible adult.

•Be alert and tum machine offif children

enter the area.

•Before and when backing, look behind

and down for small children.

•Mow up and down slopes (15 °Max),

not across,

•Remove obstacles suchas rocks, tree

limbs,etc.

•Watch for holes, ruts, or bumps.

Uneven terrain could ovedum the

machine. Tall grass can hide obstacles.

• Use slow speed. Choose a low gear so

that you will not have to stopor shift

while on the slope.

• Avoid starting or stoppingon aslope. If

tires lose traction, disengage the

blades and proceed slowly straight

down the slope.

• If machine stops while going uphill,

disengage blades, shift into reverse

and back down slowly.

•Do notturn on slopes unless neces-

sary, and then, turn slowlyand gradu-

ally downhill, if possible.

_Look for this symbolto point out

important safety precautions. It means

CAUTIONI!t BECOMEALERT!ll YOUR

SAFETYIS INVOLVED.

CAUTION: In order to prevent

accidental starting when setting up,

transporting, adjusting or making repairs,

always disconnect spark plug wire and

place wire where it cannot contact spark

plug.

,_ CAUTION: Do not coast down a hill

in neutral,you may lose control of the

tractor.

_, CAUTION: Towonly the attachments

that are recommended by and comply

with specificationsof the manufacturer of

your tractor. Use common sense when

towing. Operate only at the lowest

possiblespeed when on a slope. Too

heavy of a load, while on a slope, is

dangerous. Tires san lose traction with

the ground and cause you to lose control

of your tractor.

,_LWARNING: Engine exhaust, some of

its constituents, and certain vehicle

components contain or emit chemicals

known to the State of California tocause

cancer and birthdefects or other repro-

ductive harm.

_WARNING: Battery posts,terminals

and related accessories contain lead and

lead compounds, chemicals known to the

State of CaSfomia to cause cancer and

birthdefects or other reproductive harm.

Wash hands after handling,

PRODUCTSPECIFICATIONS

GASOLINE 3.5GALLONS

CAPACITY UNLEADED

AND TYPE: REGULAR

OILTYPE SAE 10W30

API-SF-SJ): (ABOVE 32°F)

SAE 5W-30

(BELOW 32°F)

OILCAPACITY: W/FILTER: 4.5PINTS

W/O FILTER: 4.0PINTS

SPARK PLUG: CHAMPION

GAP: .030") RC12YC

GROUND SPEED LO: HI:

(MPH): 0.7 1.7

1.4 3.3

2.3 5.4

REVERSE: 0.9 2.1

TIRE FRONT: 14 PSI

PRESSURE: REAR: 10 PSI

CHARGING 15AMPS @ 3600RPM

SYSTEM:

BATTERY: AMP/HR: 35

MIN. CCA: 280

CASE SIZE:U1R

BLADE BOLT 45-55 FT. LBS

TORQUE:

CONGRATULATIONS on your purchase

of a new tractor. It has been designed,

engineered and manufactured to give

you the best possible dependability and

performance.

Should you expodenea any problem you

cannot easily remedy, please contact a

Sears or other qualifiedservice center.

We have competent, well-trained techni-

cians and the proper tools to service or

repair this tractor.

Please read and retain thismanual. The

instructionswill enable you to assemble

and maintain your tractor propody.

Always observe the =SAFETY RULES".

REPAIRAGREEMENT

A Repair Agreement is available on this

product. Contact your nearest Sears

storefor details.

CUSTOMER RESPONSIBILITIES

• Read and observe the safety rules.

•Follow a regular schedule in maintain-

ing, caring for and using your tractor.

•Follow the instructionsunder =Mainte-

nance"and =Storage" sectionsof this

owner's manual.

I_WARNING: This tractor is equipped

with an internal combustion engine and

should not be used on or near any

unimproved forest-covered, brush-

covered or grass-covered land unless the

engine's exhaust system is equipped with

a spark arrester meeting applicable local

or state laws (if any). If a spark attester is

used, it should be maintained in effective

workingorder by the operator.

In the state of California the above is

required by law (Section 4442 of the

California Public Resources Cede).

Other states may have similarlaws.

Federal laws apply on federal lands. A

spark arrester for the muffler is available

through your nearest Sears service

center (See REPAIR PARTS sectionof

this manual).

Steering Wheel

Insert

Steering Wheel

Steedng Sleeve Steering

Extension Sleeve

(1) Washer

17132 x %3/16 x 12 Gauge

_(1) Knob

(5) Retainer Spdngs (double loop)

(2) Retainer Spdngs (single loop) ns

i_1 Gauge Wheels

._ !2da)_Ustin _ (W2)eGe_sUge-

/_ (2)Retainer Springs _(_'_

__double loop) (2) Locknut 3/8-16

(2) Shoulder Bolt

(2) Washers

3/8 x 3/4 x 14 Ga.

Video Cassette _Slope Sheet '

(1) UII uraln lUl3e

Keys

_(2) Keys

Yournewtractorhasbeenassembled at the factory with exceptionof those partsk

unassembled for shipping purposes. To ensure safe and proper operation ofyour

tractor all parts and hardware you assemble must be tightened securely. Use the

correoftools as necessary to insure proper t_jhteess.

TOOLS REQUIRED FORASSEMBLY

A socket wrench set will make assembly

easier. Standard wrench sizes you need

are listed below.

(1) 9/t6"wrendn (1) Pliers

(1) 1/2"wrench (1) Utility knife

(1) 3N" socket with

ddve ratchet

(1) "fire pressure gauge

When rightor left hand is mentioned in

this manual, it means, from your pointof

view,when you are in the operating

position (seated behind the steering

wheel).

TO REMOVE TRACTOR FROM

CARTON

UNPACK CARTON

1. Remove all accessible loose parts and

partscartons from carton.

2. Cut, fromtop to bottom, along lines on

all fourcorners of carton, and lay

panels fiat.

3. Remove mower and packing mated-

ais,

4. Check for any additionalloose parts or

cartons and remove.

BEFORE REMOVING TRACTOR

FROM SKID

ATTACH STEERING WHEEL

1. Remove hex bolt, lock washer and

large flat washer from steedng shaft.

2. Positionfront wheels of the tractor so

they are pointingstraight forward.

3. Slide the steering sleeve over the

steedng shaft.

4. Align tabs and press steedng sleeve

extension into bottom of steering

wheel

5. Position steering wheel so cross bars

are horizontal (left to right) and slide

onto steedng wheel adapter,

6. Secure steedng wheel to steedng

shaft with hex bolt, lock washer and

large flat washer previously removed.

Tighten securely.

7. Snap steering wheel insert into center

of steering wheel.

8. Remove protective materials from

tractor hood and grill.

IMPORTANT: Check for and remove

staples in skid that may puncture tires

where tractor isto roll off skid.

Steering

_ _ WheelIn.,

_LockWashe

Steering _ Large

Wheel _ Wash_

Steedng W|

Adapter

Steering

Shaft _ .,__"._,='_'-.

Steerin _k, ?_',I_

Sleeve .' _"_,'_

HOWTO SET UPYOUR TRACTOR

CHECK BATTERY

1. Lifthoed to raised position.

NOTE: If this batteryis put intoservic_

after monthand year indicated on lab

(label located between terminals) ch_

batteryfor minimum ofone hour at 6-'

amps. (See "BATTERY" in Maintenanc

section of this manual for charging

instructions).

Label

INSTALL SEAT

Adjust seat before tighteningedjustn

knob.

1. Remove adjustment knob and flat

washer sscudng seat to cardbean

packing and set aside for assembl

seat totractor.

2. Pivotseatupwardand remove from

the cardboard packing. Remove the

cardboard packing and discard.

3. Place seat on seat pan so head of

shoulder bolt is positioned over large

slotted hole in pan.

4. Push down on seat to engage

shoulder bolt in slot and pull seat

towards rear of tractor.

5. Pivot seat and pan forward and

assemble adjustment knob and fiat

washer loosely. Do nottighten.

6. Lower seat into operating position and

sit in seat.

7. Slide seat untila comfortable position

is reached which allows you to press

clutch/brake pedal all the way down.

8. Get off seat without movingits

adjusted position.

9. Raise seat and tighten adjustment

knob securely. Seat Shoulder

Seat Par

ASSEMBLE GAUGE WHEELS TO

MOWER DECK

The gauge wheels are designed to keep

the mower deck in proper positionwhen

operating mower. Be sure they are

propedy adjusted to ensure optimum

mower performance.

1. Slide gauge wheel bar down into

bracket channel, Be sure that gauge

wheel bar aligningholes are on top.

Assemble gauge wheels as shown

using shoulder bolts, 3/8 washers and

3/8-16 center Iocknutsand tighten

securely.

2. For ease of mower to tractor assem-

bly, raise gauge wheels to highest

position and retain with clevis pins

and spdng retainers.

NOTE: Adjust gauge wheels before

operatingmower. See =TOADJUST

GAUGE WHEELS" in the Operation

sectionof this manual.

Retainer Sprin

Shoulder

Bolt\Adjusting

Gauge _ __11 I

Wheel-- _J.J 3/8-16 Center

3/8 Washer__Locknut

TO ROLL TRACTOR OFF SKID (See

Operation section for location and

function of controls)

1. Press liftlever plunger and raise

attachment lift leverto its highest

position.

2, Release parking brake by depressing

clutch/brake pedal.

3. Place gearshift lever in neutral (N)

position.

4. Rolltractor forward off skid.

TO DRIVE TRACTOR OFF SKID (See

Operation section for location and

function of controls)

_WARNING: Before starting, read,

understand and follow all ins_roctionsin

the Operation sectionof this manual. Be

sure tractor is in a well-ventilated area. Be

sure the area in front oftractor is clear of

other people and objects.

1. Be sure all the above assembly steps

have been completed.

2, Check engine oil level and fill fuel

tank with gasoline.

3, Sit on seat in operating position,

depress clutch/brake pedal and set

the parking brake.

4. Place gear shiftlever in neutral (N)

position.

5. Press lift lever plunger and raise

attachment lift lever to its highest

position.

6. Start the engine. After engine has

started, move throttle controlto idle

position.

7. Depress clutch/brake pedal intofull

"BRAKE" position and hold. Move

gearshiftlever to 1stgear.

8. Slowly release clutch/brake pedal and

slowly drive tractor off skid.

9. Apply brake tostop tractor, set parking

brake and place gearshift lever in

neutral position.

lO.Turo ignition key to "OFF" position.

Continue with the instructions that follow.

INSTALL MOWER AND DRIVE BELT

Be sure tractor is on level surface and

mower suspension arms are raised with

attachment liftcontrol Engage parking

brake.

1. Cut and remove ties securing anti-

sway bar and belts. Swing anti-sway

barto left side of mower deck.

2. Slide mower under tractor with

deflector shield to rightside of tractor.

IMPORTANT: Check belt for proper

routingin all mower pulley grooves.

3. Turn height adjustment knob counter-

clockwise until it stops•

4. Lower mower linkage with attachment

liftcontrol,

5. Install belt into electric clutch pulley

groove.

6. Place the suspension arms on

outward pointingdeck pins. Retain

with double loop retainer spring with

loops up as shown.

7. Installfront plate assembly to tractor

suspension brackets and retain with

single loop retainer springs as shown.

Chassis

Gauge

Retainer

Spring

USE PLIERS FOR

RETAINER SPRINGS

Anti-Sway

Bar

Suspension

Double Loop

Retainer Spring

(Outward pointing

deck pins)

8. PositionfTontplate assembly between

front mower brackets. Raise deck and

plate assembly toalign holes and

insert flanged pins. Secure pinswith

double loop retainer springs between

the plate and mower brackets.

NOTE: To assistin locatinghole in

flanged pin, the hole in pin is inline with

notchon head of pin. If necessary, move

mulcher side-to-side to give space

between plate and mower brackets.

IMPORTANT: Check belt for proper

routingin all mower pulley grooves.

9. Connect anti-sway bar to chassis

bracket under left footrestand retain

with double loop retainer spring.

10.Tum height adjustmentknob clock-

wise to remove slackfrom mower

suspension.

11. Raise deck to highest position.

12.Adjust gauge wheels before operating

mower as shown in the Operation

section of this manual.

Electric Clutch Front

Pulley Suspention Front

Brackets Plate

Assembly

,LoopRetainer

Springs

/_ .._" Single

.... Loop

,Flanged Retainer

_ !" _Pin Springs

: . _\ /,

Inhaltsverzeichnis

Andere Craftsman Rasenmäher Handbücher

Craftsman

Craftsman ELECTRIC START 917.27108 Bedienungsanleitung

Craftsman

Craftsman 917.272058 Bedienungsanleitung

Craftsman

Craftsman 917.377820 Bedienungsanleitung

Craftsman

Craftsman 917.371820 Bedienungsanleitung

Craftsman

Craftsman 917.98642 Bedienungsanleitung

Craftsman

Craftsman 917.388421 Bedienungsanleitung

Craftsman

Craftsman 917.255460 Bedienungsanleitung

Craftsman

Craftsman 944.367742 Bedienungsanleitung

Craftsman

Craftsman 917.376654 Bedienungsanleitung

Craftsman

Craftsman 944.369340 Bedienungsanleitung

Craftsman

Craftsman 25363 Bedienungsanleitung

Craftsman

Craftsman 25428 Bedienungsanleitung

Craftsman

Craftsman 917.272352 Bedienungsanleitung

Craftsman

Craftsman 944.363341 Bedienungsanleitung

Craftsman

Craftsman 917.371571 Bedienungsanleitung

Craftsman

Craftsman 917.276071 Bedienungsanleitung

Craftsman

Craftsman 917.388572 Bedienungsanleitung

Craftsman

Craftsman 917.388651 Bedienungsanleitung

Craftsman

Craftsman 251360 Bedienungsanleitung

Craftsman

Craftsman 917.270740 Bedienungsanleitung

Craftsman

Craftsman 917.255890 Bedienungsanleitung

Craftsman

Craftsman 247.887330 Bedienungsanleitung

Craftsman

Craftsman 247.374302 Bedienungsanleitung

Craftsman

Craftsman 917.273320 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung