Craftsman 917.28001 Bedienungsanleitung

Operator's Manual

III IIII

RRFTSMRN°!

IIII II I

30" RIDING MOWER

SIDE DISCHARGE

ELECTRIC START

Model No.

917.28001

IMPORTANT:

Read and follow all Safety

Rules and Instructions before

operating this equipment,

This product has a low emission engine which operates

differently from previously built engines. Before you start the

engine, read and understand this Owner's Manual,

For answers to your questions

about this product, Call:

1-800-659-5917

Sears Craftsman Help Line

5am - 5 pm, Mon- Sat

Gasoline containing up to 10% ethanol (El O)is acceptable for use In this machine.

The use of any gasoline exceeding 10% ethanol (El0) will void the product warranty.

Esta mdqulna puede utilizar gasolina con un contenido de hasta el 10% de etanol (E10).

El uso de una gasolina que supere el 10% de etanol (EIO) anularzt la gamntia del producto.

SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179 U.S.A.

Visit our Craftsman website:www.sears.com!craftsman

439526 Rev. 2

Warranty ................................................. 2

Safety Rules ........................................... 3

Product Specifications ............................ 6

AssemblyiPre-Qperation ........................ 7

Operation .............................................. 11

Maintenance Schedule ......................... 18

Maintenance ......................................... t8

Service and Adjustments ...................... 23

Storage ................................................. 27

Troubleshooting .................................... 28

Sears Service ........................ Back Cover

Craftsman Riding Equipment Warranty

CRAFTSMAN FULL WARRANTY

FOR TWO YEARS from the date of purchase, all non-expendable parts of this riding equipment are

warranted against any defects in material or workmanship. A defective non-expendable part will

receive free in-home repair or replacement if repair is impossible.

FOR FIVE YEARS from the date of purchase, the frame and front axle of this riding equipment are

warranted against any defects in materiai or workmanship. A defective frame or front axle willreceive

free in-home repair or replacement if repair is impossible.

FOR 90 DAYS from the date of purchase, the battery {an expendable part) of this riding equipment

is warranted against any defects in material or workmanship (our testing proves that it will not hold a

charge). A defective battery will receive free in-home replacement.

ADDITIONAL LIFETIME LIMITED WARRANTY on CAST IRON FRONT AXLE (if equipped)

FOR AS LONG AS IT IS USED by the original owner after the fifth year from the date of purchase, the

cast iron front axle (ifequipped) of this riding equipment iswarranted against any defects in material or

workmanship. With proof of purchase, adefective cast front axle will receive free in-home replacement

WARRANTY SERVICE

For warranty coverage details to obtain free repair or replacement, call 1-800-659-5917 or visit the

web site: www.craftsman.com

In all cases above, if part repair or replacement is impossible, the riding equipment will be replaced

free of charge with the same or an equivalent model.

All of the above warranty coverage is void if this riding equipment is ever used while providing

commercial services or if rented to another person.

This warranty covers ONLY defects in material and workmanship. Warranty coverage does NOT

include:

• Expendable parts (except battery) that can wear out from normal use within the warranty period,

including but not limited to blades, spark plugs, air cleaners, belts, and oil filters.

- Standard maintenance servicing, oil changes, or tune-ups.

- Tire replacement or repair caused by punctures from outside objects, such as nails, thorns,

stumps, or glass.

• Tire or wheel replacement or repair resulting from normal wear, accident, or improper operation or

maintenance.

; Repairs necessary because of operator abuse, including but not limited to damage caused by

towing objects beyond the capability of the riding equipment, impacting objects that bend the

frame, axle assembly or crankshaft, or over-speeding the engine.

•Repairs necessary because of operator negligence, including but not limited to, electrical and

mechanical damage caused by improper storage, failure to use the proper grade and amount

of engine oil, failure to keep the deck clear of flammable debris, or failure to maintain the riding

equipment according to the instructions contained in the operator's manual.

• Engine (fuel system) cleaning or repairs caused by fuel determined to be contaminated or oxidized

(stale). In genera], fuel should be used within 30 days of its purchase date.

• Normal deterioration and wear of the exterior finishes, or product label replacement.

This warranty gives you specific legal rights, and you may also have other rights which vary from

state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

DANGER: This cutting machine is capable of amputating hands and feet and throwing

objects. Failure to observe the following safety instructions could result in serious injury

or death.

_IbWARNING: In order to prevent acci-

dental starting when setting up,transporting,

adjusting or making repairs, always discon-

nect spark plug wire and place wire where

it cannot contact spark plug.

_IbWARNING: Do not coast down a hill

in neutral, you may lose control of the rid-

ing mower.

WARNING: Engine exhaust, someof its

constituents, and certainvehicle components

contain or emit chemicals known tothe State

ofCaliforniato cause cancer andbirthdefects

or other reproductive harm.

_WARNING:This unit is not intended

for the use of wheel weights. Only use

attachments designed specifically for this

riding mower.

_WARNING: Battery posts, terminals

and related accessories contain lead and

lead compounds, chemicals known to the

State of California to cause cancer and birth

defects or other reproductive harm. Wash

hands after handling.

I. GENERAL OPERATION

- Read, understand, and follow all instruc-

tions on the machine and in the manual

before starting.

* Donot put hands orfeet near rotating parts

or under the machine. Keep clear of the

discharge opening at all times.

-Only allow responsible adults, who are

familiar with the instructions, to operate

the machine.

, Clearthe area of objects such as rocks,

toys, wire, etc., which could be picked up

and thrown by the blade.

• Be sure the area is clear of bystanders

before operating. Stop machine if anyone

enters the area.

, Never carry passengers.

, Do not mow in reverse unless absolutely

necessary. Always lookdown and behind

before and while backing.

•Never direct discharged material toward

anyone. Avoid discharging material

against awalf or obstruction. Material may

ricochet back toward the operator. Stop

the blade when crossing gravel surfaces.

•Do not operate machinewithoutthe entire

grass catcher, discharge chute, or other

safety devices in place and working.

*Slow down before turning.

•Never leave a running machine unat-

tended. Always turn off blade, set park-

ing brake, stop engine, and remove keys

before dismounting.

, Disengage blade when not mowing. Shut

off engine and wait for all parts to come

to a complete stop before cleaning the

machine, removing the grass catcher, or

unclogging the discharge chute.

°Operate machine only in daylight or good

artificial light.

, Do not operate the machine while under

the influence of alcohol or drugs.

• Watch for traffic when operating near or

crossing roadways.

,Use extra care when loading or unloading

the machine into a trailer or truck.

- Always wear eye protection when operat-

ing machine.

-Data indicates that operators, age 60

years and above, are involved in a large

percentage of riding mower-related inju-

ries. These operators should evaluate

their ability to operate the riding mower

safely enough to protect themselves and

others from serious injury.

- Keep machine free of grass, leaves or

other debris build-up which can touch hot

exhaust /engine parts and burn. Do not

allow the mower deck to plow reaves or

other debris which can cause build-up to

occur. Clean any oil or fuel spillage before

operating or storing the machine. Allow

machine to cool before storage.

Ii. SLOPE OPERATION

Slopes are a major factor related to loss of

control and tip-over accidents, which can

result in severe injury or death. Operation

on all slopes requires extra caution. If you

cannot back upthe slope or ifyoufeel uneasy

on it, do not mow it.

• Mow up and down slopes (15° Max), not

across.

•Watch for holes, ruts, bumps, rocks, or

other hidden objects. Uneventerrain could

overturn the machine. Tallgrass can hide

obstacles.

• Choose alow ground speed so that you

will not have to stop or shift while on the

slope.

° Do not mow on wet grass. Tires may lose

traction,

° Always keep the machine in gear when

going down slopes. Do not shift to neutral

and coast downhill.

• If machine stops while going uphill,

disengage blade, shift into reverse and

back down slowly.

• Avoid starting, stopping, or turning on a

slope. Ifthetires]osetraction, disengage

the bladeand proceed s]owlystraight down

the slope.

• Keep all movementon the slopes slow and

gradual. Do not make sudden changes

in speed or direction, which could cause

the machine to roll over.

• Use extra care while operating machine

with grass catchers or other attachments;

they can affect the stability ofthe machine,

• Do no use on steep slopes,

- Do not try to stabilize the machine by

putting your foot on the ground.

• Do not mow near drop-offs, ditches, or

embankments. The machine could sud-

denly roll over if a wheel is over the edge

or if the edge caves in.

III. CHILDREN

Tragic accidents can occur if the operator

is not alert to the presence of children.

Children are often attracted to the machine

and the mowing activity. Never assume

that children will remain where you last

saw them.

• Keep children outofthe mowing areaand

in the watchful care of a responsible adult

other than the operator.

• Be alert and turn machine off if a child

enters the area.

• Before and while backing, lookbehind and

down for small children.

• Never carry children, even with the blade

shutoff. They mayfall offand beseriously

injured or interfere with safe machine

operation. Children who have been given

rides inthe past may suddenly appear in

the mowing area for another ride and be

run over or backed over by the machine.

• Never allow children to operate the ma-

chine.

•Use extra care when approaching blind

corners, shrubs, trees, or other objects

that may block your view of a child.

IV, SERVICE

SAFE HANDLING OF GASOLINE

To avoid personal injuryor property dam-

age, use extreme care in handling gasoline.

Gasoline is extremely flammable and the

vapors are explosive.

• Extinguish all cigarettes, cigars, pipes,

and other sources of ignition.

• Use only approved gasoline container.

•Never remove gas cap or add fuel with

the engine running. Allow engine to cool

before refueling.

• Never fuel the machine indoors.

o Never storethe machine or fuel container

where there is an open flame, spark, or

piJot light such as on a water heater or

other appliances.

• Never fill containers inside a vehicle or

on a truck or trailer bed with plastic liner.

Always place containers on the ground

away from your vehicle when fitling.

- Removegas-poweredequipmentfromthe

truck or trailer and refuel it on the ground.

If this is not possible, then refuel such

equipment with a portable container, rather

than from a gasoline dispenser nozzle.

• Keep the nozzle in contact with the rim

of the fuel tank or container opening at

all times until fueling is complete. Do not

use a nozzle lock-open device.

• Iffuel isspitled on clothing, change clothing

immediately.

° Never overfill fuel tank, Replace gas cap

and tighten securely.

GENERAL SERVICE

-Never operate machine in a closed area.

•Keep all nuts and bolts tight to be sure the

equipment is in safe working condition.

-Never tamper with safety devices, Check

their proper operation regularly.

• Keep machine free of grass, leaves, or

other debris build-up. Clean oilorfuelspill-

age and remove any fuel-soaked debris.

Allow machine to cool before storing.

If you strike a foreign object, stop and

inspectthe machine. Repair,if necessary,

before restarting.

•Never make any adjustments or repairs

with the engine running.

• Check grass catcher components and the

discharge chute frequently and replace

with manufacturer's recommended parts,

when necessary.

•Mower blade is sharp, Wrap the blade or

wear gloves, and use extra caution when

servicing them,

• Check brake operation frequently. Adjust

and service as required.

• Maintain or replace safety and instruction

labels, as necessary.

, Be sure the area is clear of bystanders

beforeoperating. Stop machine ifanyone

enters the area.

• Never carry passengers.

• Do not mow in reverse unless absolutely

necessary. Always look down and behind

before and while backing.

PRODUCT SPECIFICATIONS

[GasolineCapacity 1.5Gallons

!andType: UnleadedRegular

OilType SAE30 (Above 32°F)

(APISG-SL): SAE5W30(Below32°F)

OilCapacity: 48 Oz.

SparkPlug: ChampionRC12YC

(Gap: .030")

GroundSpeed Forward: 0- 4

(Mph): Reverse: 0 - 2

ChargingSystem: 3 Amps@ Battery

BladeBoltTorque: 45-55Ft.Lbs.

CONGRATULATIONS on your purchase of

a new riding mower, It has been designed,

engineered and manufactured to give you

the best possible dependability and perfor-

mance.

Should you experience any problem you

cannot easily remedy, pleasecontact aSears

or other qualified service center. We have

competent, well-trained representatives

and the proper tools to service or repair this

riding mower.

Please read and retain this manual. The

instructions will enable you toassemble and

maintain your ridingmower properly. Always

observe the "SAFETY RULES".

CUSTOMER RESPONSIBILITIES

• Read and observe the safety ruies.

• Follow a regular schedule in maintaining,

caring for and using your riding mower.

• Follewthe instructions under Maintenance

and Storage sections of this manual.

_,WARNING: This riding mower is

equipped with an internal combustion en-

gine and should not be used on or near any

unimproved forest-covered, brush-covered

or grass-covered land unless the engine's

exhaust system is equipped with a spark

arrester meeting applicable local or state

taws (ff any). If a spark arrester is used, it

should be maintained in effective working

order by the operator.

lnthe state of Californiathe above is required

by law (Section 4442 of the California Public

Resources Code). Other states may have

similar laws. Federal laws apply on federat

lands. A spark arrester for the muffler is

available through your nearest Sears service

center (See REPAIR PARTS manual).

REPAIR PROTECTIONAGREEMENTS

Congratulations on making a smart pur-

chase. Your new Craftsman® product is

designed and manufactured for years of

dependable operation. But like all products,

itmay require repairfrom timeto time.That's

when having a Repair Protection Agreement

can save you money and aggravation.

Purchase a Repair Protection Agreement

now and protect yourself from unexpected

hassle and expense.

Here's what's included in the Agreement:

, Expert service byour 12,000professional

repair specialists.

• Unlimitedserviceand nochargefor parts

and labor on all covered repairs.

• Product replacement if your covered

product can't be fixed.

• Discount of t0% from regular price of

service and service-related parts not

covered bythe agreement; also, 10% off

regular price of preventive maintenance

check.

•Fast help by phone -phone support

from a Sears representative on products

requiring in-home repair,plus convenient

repair scheduling.

Onceyou purchasethe Agreement, asimple

phone call is allthat ittakes foryou tosched-

uleservice. Youcan callanytime dayor night,

or schedute a service appointment online.

Sears has over 12,000 professional repair

specialists, who have access to over 4.5

million quality parts and accessories. That's

the kind ofprofessionalism you can count on

to help prolong the life ofyour new purchase

for years to come. Purchase your Repair

Protection Agreement today[

Some limitations and exclusions apply.

Forprices and additional information call

1-800-827-6655.

SEARS INSTALLATION SERVICE

For Sears professional installation of home

appliances, garage door openers, water

heaters, and other major home items,inthe

U.S.A. call 1-800-4-MY-HOME®

Steedng Wheel

Insert Steering

Boot

Steedng Wheel

(1) 5t16-18 x4

Hex Bolt (1) Lockwasher Steedng

j_ @ Shaft Cover

Steedng Shaft Stee_ng Wheel (1) Large Flat

Extension Adapter Washer

(1) Cup Washer

Seat (I) Knob

(t) Rear Bumper (1) Front Bumper

(4)Screw

#10 x0,200

(1) Shroud

(2)Key

Slope Sheet

Your new riding mower has been assembled atthe factorywith the exception ofthose parts

left unassembled for shipping purposes. To ensure safe and proper operation ofyour riding

mower all parts and hardware you assemble must be tightened securely. Use the correct

tools as necessary to ensure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly

easier. Standard wrench sizes you need

are listed below.

(1) 1/2" wrench (1) Utility knife

(1) Tire pressure gauge

When right or left hand is mentioned in

this manual, it means when you are in the

operating position (seated behind the steer-

ing wheel).

TO REMOVE RIDING MOWER FROM

CARTON

UNPACK CARTON

1. Remove all accessible loose parts and

parts boxes from carton.

2. Cut along dotted lines on all four panels

of carton. Remove end panels and lay

side panels flat.

3. Remove packing materials from riding

mower.

4. Check for any additional loose parts or

cartons and remove.

NOTE: Only cut carton with ashort blade

utility knife, along blade or saw can puncture

tires on unit.

HOW TO SET UP YOUR RIDING

MOWER

CHECK BA'I-rERY

Ensure battery issecurelyfastened, andthat

all wiresare securely connected,

°Batteryislocated under the seat,

• Battery has been fully charged from the

factory,beforeinstallation.

Seat artery

TO INSTALL STEERING WHEEL

1. Slide extension shaft ontosteering shaft.

2. Slide steering shaft protective foam cover

over steering shaft.

3. Place steering boot over steering shaft

and push down to secure.

4. Position fr0nt wheels ofthe riding mower

so they are pointing straight forward.

5. Remove steering wheel adapter from

steering wheel and slide adapter onto

steering shaft,

7. Press steering wheel into position on

shaft, install large washer, lock washer,

bolt and tighten securely.

8. Snap steering wheel insert into center of

steering wheel securely.

7. Slide seat until a comfortable position is

reached whichallows you to pressclutch/

brake pedal all the way down.

8. Get off seat without moving its adjusted

position.

9. Raise seat and tighten adjustment knob

securely.

Seat Pan

Pads

SteeringBoot_.....

Extension

Shaft _ FoamCover

gShaft

TO INSTALL SEAT

Adjust seat before tightening adjustment

knob.

t. Remove adjustment knob and cup

washer securing seat tocardboard pack-

ing and set aside.

2, Remove seat from the cardboard pack-

ing and set seat aside, Remove the

cardboard packing and discard.

3. Place seat on seat pan so all three (3)

bottom pads are positioned over large

slotted holes in pan.

4. Push down on seat to engage pads in

slots and pull seat towards rear of the

riding mower,

5. Pivotseat andpanforward andassemble

adjustment knoband cup washerloosely.

Do not tighten.

6. Lower seat into operating position and

sit in seat,

Cup Washer

Adjustment _'_\

NOTE: You may now rolt your riding

mower off the skid. Follow the appropriate

instruction below to removethe ridingmower

from the skid.

WARNING: Before starting, read, un-

derstand and fo_low all instructionsin the

Operation section of this manual. Be sure

riding mower is in a well-ventilated area.

Be sure the area in front of riding mower is

clear of other people and objects.

TO ROLL RIDING MOWER OFF

SKID (See Operation section for

location and function of controls)

1. Raisedeck liftleverto itshighest position.

2. Release parking brake by depressing

clutch/brake pedal.

3. Shift unit to neutral.

4. Roll riding mower forward off skid.

•

TO ATTACH FRONT BUMPER

NOTE: Foreaseofassembly, you maywish

to obtain the assistance of another person

for mounting bumper to riding mower.

1. Remove (2)screws from front chassis of

riding mower,

2. Tilt the front bumper sothat the bumper

tabs catch the slots on the front of the

chassis andlower the bumper into place.

3, Attachthe bumper tofront of chassiswith

screws removed in step 1.

4. Tighten the two (2) screws securely.

Screw

5, Position plastic shroud over bumper as

shown and loosely assmeble to bumper

with the four (4) supplied screws,

6, Tighten ati four (4) screws securely.

Screws

Plasti_

Shroud

TO ATTACH REAR BUMPER

NOTE: Foreaseofassembly,you may wisl

to obtainthe assistance of another person

for mountingbumper to riding mower.

1. Remove (4) screws from rear chassisof

riding mower,

2. Positionbumper asshownandassemble

to rear chassis with screws removed in

step 1.

3, Tighten the four (4) screws securely,

RearBumper

CHECK TIRE PRESSURE

The tires onyour ridingmowerwere overin-

flated at the factory for shipping purposes.

Correct tire pressure is important for best

cuttingperformance.

CHECK DECK LEVELNESS

For best cutting results, mower housing

shouldbe properlyleveled, See "TO LEVEL

MOWER HOUSING" in the Service and

Adjustments section of this manual.

CHECK FOR PROPER POSITON OF

MOWER DRWE BELT

See the figure that isshownfor replacingthe

mower drivebelt inthe service and adjust-

ment section ofthis manual, Verify that the

belt isroutedcorrectly.

CHECK BRAKE SYSTEM

After you learn how to operate your riding

mower, check to see that the brake is oper-

ating properly.

t_CHECKLIST

Before you operate your new riding mower,

we wish to assure that you receive the best

performance and satisfaction from this Quai-

it,/Product.

Please review the following checklist:

J All assembly instructions have been

completed.

,/ No remaining loose parts in carton.

,/ Battery is properly connected.

,I Seat is adiusted comfortably and tight-

ened securely.

,/ All tires are properly inflated, (For ship-

ping purposes, the tires were overinflated

at the factory.)

,/ Be sure mower deck is properly leveled

side-to-side/front-to-rear far best cutting

results. Fires must be properly inflated

for leve_ing.)

€" Check mower belt. Be sure it is routed

properly around pulleys andinside allbelt

keepers,

v" Check wiring. See that all connections

are still secure and wires are properly

clamped.

While learning how to useyour riding mower,

pay extra attention to the following important

iterr_s:

7" Engine oil is at proper level.

JFueltank isfilled with fresh, clean, regutar

unleaded gasoline.

J Become familiar with all controls, their

location and function. Operate them

before you start the engine.

,/ Besure brake system isin safe operating

condition.

,/ Be sure Operator Presence System and

Reverse Operation System (ROS) are

working properly (Seethe Operation and

Maintenance sections in this manual,)

Andere Handbücher für 917.28001

Inhaltsverzeichnis

Sprachen:

Andere Craftsman Rasenmäher Handbücher

Craftsman

Craftsman 917.25051 Bedienungsanleitung

Craftsman

Craftsman 917.28608 Bedienungsanleitung

Craftsman

Craftsman EZ3 917.256711 Bedienungsanleitung

Craftsman

Craftsman 917.389621 Bedienungsanleitung

Craftsman

Craftsman 917.377641 Bedienungsanleitung

Craftsman

Craftsman 917.377423 Bedienungsanleitung

Craftsman

Craftsman 143 Bedienungsanleitung

Craftsman

Craftsman 917.255723 Bedienungsanleitung

Craftsman

Craftsman 917.377292 Bedienungsanleitung

Craftsman

Craftsman EZ3 917.386240 Bedienungsanleitung

Craftsman

Craftsman 917.271531 Bedienungsanleitung

Craftsman

Craftsman 917.376160 Bedienungsanleitung

Craftsman

Craftsman 917.371622 Bedienungsanleitung

Craftsman

Craftsman 917.377424 Bedienungsanleitung

Craftsman

Craftsman 917.273351 Bedienungsanleitung

Craftsman

Craftsman 917.270623 Bedienungsanleitung

Craftsman

Craftsman 917.377941 Bedienungsanleitung

Craftsman

Craftsman 247.370160 Bedienungsanleitung

Craftsman

Craftsman 917.276860 Bedienungsanleitung

Craftsman

Craftsman 917.378840 Bedienungsanleitung

Craftsman

Craftsman 917.25024 Bedienungsanleitung

Craftsman

Craftsman 917.389070 Bedienungsanleitung

Craftsman

Craftsman 917.388852 Bedienungsanleitung

Craftsman

Craftsman 917.272673 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung