Craftsman 917.377050 Bedienungsanleitung

Owner's Manual

CRnFTSMnNo

6.0 HORSEPOWER

22" REAR DISCHARGE

POWER PROPELLED

ROTARY LAWN MOWER

Model No.

917.377050

,Safety

•Assembly

°Operation

• Maintenance

•EspaSol

= Repair Parts

CAUTION'.

Read and follow al!

Safety Rules and Instructions

before operating this equipment

Sears, Roebuck and Co., Hoffman Estates, IL 60179

Visit our Craftsman website: www searscom/craftsman

Warranty Product Specifications 11

Safety Rules 2 Service and Adjustments 14

Assembly 4 Storage 16

Operation 6 Troubleshooting 17

Maintenance Schedule 10 Repair Parts 37

Maintenance 10 Parts Ordering Back Cover

LIMITED TWO YEAR WARRANTY ON CRAFTSMAN POWER MOWER

For two years from date of purchase, when this Craftsman Lawn Mower is maintained,

lubricated, and tuned up according to the operating and maintenance instructions in the

owner's manual, Sears will repair free of charge any defect in material or workmanship.

If this Craftsman Lawn Mower is used for commercial or rental purposes, this warranty

applies for only 90 days from the date of purchase.

'This Warranty does not cover:

,Expendable items which become worn during normal use, such as rotary mower

blades, blade adapters, belts, air cleaners and spark plug.

• Repairs necessary because of operator abuse or negligence, including bent crank-

shafts and the failure to maintain the equipment according to the instructions con-

tained in the owner's manual.

Warranty service is available by returning the Craftsman power mower to the nearest

Sears Service Center/Department in the United States° 1his warranty applies only while

this product is in use in the United States,

This Warranty gives you specific legal rights, and you may also have other rights which

vary from state to state.

SEARS, ROEBUCK AND CO., D/817 WA, HQFFMAN ESTATES, ILLINOIS 60179

Safety standards require operator

presence controls to minimize the

risk of injury. "four unit is equipped

with such controls. Do not attempt to

defeat tile function of the operator

presence controls under any

circumstances.

TRAINING;

o Read this operator's manual carefully°

Become familiar with the controls and

know how to operate your mower

properly. Learn how to quickly stop

mower,

• Do not allow children to use your mower.

Never allow adults to use mower without

proper instructions.

• Keep the area of operation clear of all

persons, especially small children and

pets,

° Use mower only as the manufacturer

intended and as described ill this

manual. 2

*Do not operate mower if it has been

dropped or damaged in any manner,

Always have damage repaired before

using your mower.

.Do not use accessory attachments that

are not recommended by the manufac-

turer. Use of such attachments may be

hazardous.

.The blade turns when the engine is

running.

PREPARATION:

-Always thoroughly check the area to be

mowed and clear it of all stones, sttcks,

wires, bones, and other foreign objects,

These objects wilt be thrown by the

biade and can cause severe injury.

° Always wear safety glasses or eye

shields when starting and while using

your mower.

•Dress properly. Do not operate mower

when barefoot or wearing open sandals.

Wear only solid shoes with good traction

when mowing.

- Checkfueltankbeforestartingengine.

Donotfill gastankindoors,whenthe

engine is running or when the engine is

hot. Allow the engine to cool for several

minutes before filling the gas tank. Clean

off any spilled gasoline before starting

the engine,

• Always make wheel height adjustments

before starting your mower. Never

attempt to do this while the engine is

running,

•Mow only in daylight or good artificial

light,

OPERATION:

• Keep your eyes and mind on your

mower and the area being cut,, Do not let

other interests distract you.

• Do not mow wet or slippery grass. Never

run while operating your mower. Always

be sure of your footing .-- keep a firm

hold on the handles and walk,

,, Do not put hands or feet near or under

rotating parts. Keep clear of the dis-

charge opening at all times.

o Always stop the engine whenever you

leave or are not using your mower, or

before crossing driveways, walks, roads,

and any gravel--covered areas,

oNever direct discharge of material

toward bystanders nor allow anyone

near the mower while you are operating

it.

°Before cleaning, inspecting, or repairing

your mower, stop the engine and make

absolutely sure the blade and all moving

parts have stopped_ Then disconnect the

spark plug wire and keep it away from

the spark plug to prevent accidental

starting.

•Do not continue to run your mower if you

hit a foreign object, Follow the procedure

outlined above, then repair any damage

before restarting and operating you

mower_

° Do not change the governor settings or

overspeed the engine. Engine damage

or personal injury may result.

° Do not operate your mower if it vibrates

abnormally. Excessive vibration is an

indicat)on of damage; stop the engine,

safely check for the cause of vibration

and repair as required.

° Do not run the engine indoors_ Exhaust

fumes are dangerous.

• Never cut grass by pulling the mower

towards you. Mow across the face of

slopes, never up and down or you

might lose your footing. Do not mow

excessively steep slopes, Use caution

when operating the mower on uneven

terrain or when changing directions --

maintain good footing.

• Never operate your mower without

proper guards, plates, grass catcher or

other safety devices in place.

MAINTENANCE AND STORAGE:

•Check the blade and the engine

mounting bolts often to be sure they are

tightened properly.

o Check all bolts, nuts and screws at

frequent intervals for proper tightness to

be sure mower is in safe working

condition°

° Keep all safety devices in place and

working.

° To reduce fire hazard, keep the engine

free of grass, leaves or excessive

grease and oil.

° Check grass catcher often for deteriora-

tion and wear and replace worn bags.

Use only replacement bags that are

recommended by and comply with

specifications of the manufacturer of

your mower.

, Always keep a sharp blade on your

mower.

• Allow engine to cool before storing in

any enclosure.

• Never store mower with fuel in the tank

inside a building where fumes may

reach an open flame or an ignition

source such as a hot water heater,

space heater, clothes dryer, etc.

_i, Look for this symbol to point out

important safety precautions. It means

CAUTION!!! BECOMEALERT!!! YOUR

SAFETY IS INVOLVED.

&CAUTION; Always disconnect spark

plug wire and place wire where it cannot

contact spark plug in order to prevent

accidental starting when setting up,

transporting, adjusting or making repairs_

_IbWARNING

The engine exhaust from this product

contains chemicals known to the State of

Catifornia to cause cancer, birth defects,

or other reproductive harm.

These accessories were available when this lawn mower was produced. They are not

shipped with your mower, They are also available at most Sears retail outlets and service

centers, Most Sears stores can also order repair parts for you, when you provide the model

number of your lawn mower° Some of these accessories may not apply to your lawn mower:

LAWN MOWER PERFORMANCE

[____,_ GRASS CATCHERS

FOR

.REAR DISCHARGE

LAWN MOWERS _

CLIPPING DEFLECTOR

FOR REAR DISCHARGE LAWN MOWER S . MULCHER KITS

,,,,,,,,,,,............

LAWN MOWER MAINTENANCE

MUFFLERS

BELTS

GRASS CATCHERS

FOR

SIDE DISCHARGE

LAWN MOWERS

c==r'-----/-_ ...0,/'

STABILIZER

GAS CANS

AIR FtLTERN SPARK PLUGS

,•i i _ J,,,, , II i

BLADES

,,,,,.............. BLADE ADAPTERS WHEELS ENGINE OIL

Read these instructions and this manual in its

entirely before you attempt to assemble or

operate your new lawn mower..

IMPORTANT= This lawn mower is shipped

WITHOUT' OIL OR GASOLINE in the engine,

Your new lawn mower has been assembled

at the factory with the exception of those parts

left unassembled for shipping purpose& AIt

parts such as nuts, washers, bolts, etc.,

necessary to complete the assembly have

been placed in the parts bag, To ensure safe

and proper operation of your lawn mower, all

parts and hardware you assemble must be

tightened securely. Use the correct tools as

necessary to ensure proper tightness.

TO REMOVE LAWN MOWER FROM

CARTON

o Remove loose paris Included with mower.

*Cut down two end comers of carton and

lay end panel down fiat,

. Remove all packing materials except

padding between upper and lower handle

and padding holding operator presence

control bar to upper handle,

, Roll lawn mower out of carton and check

carton thoroughly for additional loose

pads,

HOWTO SETUPYOUR LAWN MOWER

TO UNFOLD HANDLE

IMPORTANT: Unfold handles carefully so as

not to pinch or damage control cables,

•Raise handles until lower handle section

locks into place in mowing position°

•Remove protective padding, raise upper

handle section into place on lower handle

and tighten both handle knobs°

•Remove handle padding holding operator

presence control bar to upper handle.

• Your lawn mower handle can be adjusted

for your mowing comfort, Refer to "Adjust

Handle" in the Service and Adjustment

section of this manual,

Operator presence

barUpper handle "--..,...

Lift up up

Mowing

position

Lower handle

TO INSTALL ATTACHM ENTS

Your lawn mower was shipped ready to be

used as a muicher. To convert to bagging or

discharging:

• Open rear door and remove mulcher plug.

Store mulcher p_ug in a safe place.

_, You can now install catcher or optional

clipping deflector.

° To return to mulching operation, install

mulcher plug into discharge opening of

mower. Be sure all tabs are seated

properly.

Mulcher plug

,&CAUTION: Do not run your lawn

mower without mulcher plug in place or

approved clipping deflector or grass

catcher In place. Never attempt to

operate the lawn mower with the rear

door removed or propped open,

KNOW YOUR LAWN MOWER

READ THIS OWNER'S MANUALAND SAFETY RULES BEFORE OPERATING YOUR LAWN

MOWER, Compare the illustrations with your lawn mower to familiarize yourself with the

location of var ous controls and adjustments, Save this manual for futurereference: .... _...............

3"basesymbolsmayappear onyour lawnmowerortn literaturesuppliedwflhtheproduct,Learnandunderstand

theremeaning,

CAUTION ENGINE ENGINE FAST SLOW CHOKE FUEL OIL DANGER, KEEP HANDS

OR WARNING ON OFF AND FEET AWAY

Engine zone control cable Operator presence control bar

Drive control lever

Starter handle

Grass catcher

Mulcher plug

Handle knob

Engine oil

dipstick

Housing

Drive cover

Gasoline cap

Primer

IMPORTANT: This lawn mower is shipped Wheel adjuster

WITHOUT OIL OR GASOLINE in the engine_ (on each wheel)

_EETSCP_SAFETY REQUiRE:MENTS _ .... ".................. " " '_"........."' _'

Sears rotary walk-behind power lawn mowers conform to the safety standards of the American

National Standards institute and the US. Consumer Product Safety Commission, The blade

turns when the englne is running,

Operator presence control bar- must be S_rter handle ' used for starting the engine.

held down to the handle to start the engine, Drive control lever - used to engage power-

Release to stop the engine, propelled forward motion of lawn mower.

Primer - pumps additional fuel from the Mulcher plug - must be removed to convert to

carburetor to the cylinder for use when bagging or discharging operation,

starting a cold engine,

_ he operation of any lawn

mower can result in foreign

objects thrown into the eyes,

which can result in severe eye damage.

Always wear safety glasses or eye shields

while operating your lawn mower or

performing any adjustments or repairs,

We recommend a wide vision safety mask

over spectacles or standard safety

glasses,

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED

The engine speed was set at lhe factory

for optimum performance. Speed is not

adjustable°

ENGINE ZONE CONTROL

&CAUTION: Federal regtTla!ions re.quire

an engine control to be Insiairea on this

lawn mower in order to minimize the risk

of blade contact injury. Do not under any

circumstances attempt to defeat the

function o[ the operator control. "['he blade

turns when the engine is running.

• Your lawn mower is equipped with an

operator presence control bar which

requires the operator to be positioned

behind the lawn mower handle to start and

operate the lawn mower.

TO ADJUST CUTTING HEIGHT

•Raise wheels for low cut and lower wheels

for high cut,

° Adjust cutting height to suit your require-

ments. Medium position is best for most

lawns,

• To change cutting height, squeeze adjuster

lever toward wheel. Move wheel up or

down to suit your requirements° Be sure all

wheels are in the same setting+

NOTE: Adjuster is properly positioned

when plate lab insells into hole in lever.

Also, 9-position adjusters (if so equipped)

allow lever to be positioned between the

plate tabs.

Plate Tab

TO ATTACH GRASS CATCHER

• Lift the rear door of the lawn mower

and place the grass catcher frame

hooks onto the door pivot pins,

•The grass catcher is secured to the

lawn mower housing when the rear

door is lowered onto the grass catcher

frame,

,&CAUTION: Do not run your lawn

mower without clipping deflector or

approved grass catcher in place, Never

attempt to operate the lawn mower with

the rear door removed or propped open_

,Rear door

Grass

catcher

handle

Pivot

pins

TO EMPTY GRASS CATCHER

•Lift up on grass catcher using the frame

handle,

.Remove grass catcher with clippings

from under lawn mower handle.

.Empty clippings from bag using both

frame handle and bag handle.

NOTE: Do not drag the bag when

emptying; it will cause unnecessary wear,,

Grass

catcher

Bag frame

handle handle

DRIVE CONTROL

• Self-propelling is controlled by holding

the operator presence control bar down

to the handle and pushing the drive

control lever forward until it clicks; then

release the lever.

• Forward motion will stop when the

operator presence control bar is

released. To stop forward motion

without stopping engine, release the

operator presence control bar slightly

until the drive control disengages. Hold

operator presence control bar down to

handle to continue mowing without self-

propelling.

• To keep drive control engaged when

turning corners, push down on handle

and lift front wheels off ground while

turning lawn mower.

Operator presence control bar

/\. Drive

:\. _,,. control

To engage drive Drive control

contro! disengaged

BEFORE STARTING ENGINE

OIL

Your lawn mower is shipped without oil in the

engine.

= Be sure mower is level and area around oi!

fill is clean.

• Remove engine oil cap and fill to the full

line.

NOTE: Allow oil to settle down into engine

for accurate dipstick reading,

o Engine holds 20 ozs. of oil. For type and

grade of oil to use, see "ENGINE" in

Maintenance section of this manual.

,, Pour oit slowly. Do not over fill

• Check oil level before each use. Add oil if

needed° Fill to full line.

• To read proper level, tighten engine oil cap

each time.

•Reinstall engine oil cap and tighten,

° Change the oi! after ever,/25 hours of

operation or each season. You may need

to change the oil more often under dusty,

ditty conditions.

ADD GASOLINE

NOTE: Before filling fuel tank, remove

and discard the debris plug that is inside

the tank.

° Fill fuel tank. Use fresh, clean, regular

unleaded gasoline with a minimum of 87

octane° Do not mix oil with gasoline.

Purchase fuel in quantities that can be

used within 30 days to assure fuel

freshness.

RNING,: Experience indicates that

I blenaed fuels (called gasohof or

using ethanol or methanol) can attract

moisture which leads to separation and

formation of acids during storage. Acidic gas

can damage the fuel system of an engine

while in storage. To avoid engine problems,

the fuel system should be emptied before

storage of 30 days or longer. Drain the gas

tank, slart the engine and let it run until the

fuel lines and carburetor are empty. Use

fresh fuel next season. See Storage

Instructions for additional information. Never

use engine or carburetor cleaner products in

the fuel tank or permanent damage may

occur.

_,CAUTION: Fill to bottom of gas tank

filler neck° Do not overfill° Wipe off any

spilled oil or fuel. Do not store, spill or

use gasoline near an open flame,.

Gasoline tiler cap Engine oil cap

(Discard

debris plug

inside)

TO START ENGINE

," To start a cold engine, push primer three

(3) times before trying to start. Use a firm

push. This step is not usually necessary

when starting an engine which has

already run for a few minutes,

• Hold operator presence control bar down

to the handle and pull starter handle

quickly. Do not allow starter rope to snap

back.

° To stop engine, release operator presence

control bar.

NOTE: tn cooler weather it may be

necessary to repeat priming steps, in

warmer weather over priming may cause

flooding and engine will not start, If you

do flood engine, wait a few minutes

before attempting to start and do not

repeat priming steps.

MOWING TIPS

, Under certain conditions, such as very

tall grass, it may be necessary to raise

the height of cut to reduce pushing effort

and to keep from overloading the engine

and leaving c]umps of grass clippings. It

may also be necessary to reduce

ground speed and/or run the lawn

mower over the area a second time,

oFor extremely heavy cutting, reduce the

width of cut by overlapping previously

cut path and mow slowly.

•For better grass bagging and most

cutting conditions, the engine speed

should be set in the fast position.

• When using a rear discharge lawn

mower in moist, heavy grass, clumps of

cut grass may not enter the grass

catcher. Reduce ground speed (push-

ing speed) and/or n_n the lawn mower

over the area a second time,

• If a trail of clippings is left on the right

side of a rear discharge mower, mow in

a clockwise direction with a small

overlap to collect the clippings on the

next pass.

• Pores in cloth grass catchers can

become filled with dirt and dust with use

and catchers will collect less grass. To

prevent this, regularly hose catcher off

with water and let dry before using.

• Keep top of engine around starter clear

and clean of grass clippings and chafL

This will help engine air flow and extend

engine life.

MULCHING MOWING TIPS

IMPORTANT: For best performance, keep

mower housing free of built-up grass and

trash. See "Cleaning" in Maintenance section

of this manual.

• The special mulching blade will recut the

grass clippings many times and reduce

them in size so that as they fall onto the

lawn they will disperse into the grass and

not be noticed. Also, the mulched grass will

biodegrade quickly to provide nutrients for

the lawn. Always mulch with your highest

engine (blade) speed as this witl provide the

best recurring aclion of the blade&

• Avoid cutting your lawn when it is weL Wet

grass tends to form clumps and interferes

with the mulching action. The best time to

mow your lawn is the early afternoon. At

this time the grass has dried and the newly

cut area will not be exposed to the direct

sun,

• For best results, adjust the lawn mower

cutting height so that the lawn mower cuts

off only the top one-third of the grass blades.

If the lawn is overgrown it will be necessary

to raise the height of cut Io reduce pushing

effort and to keep from overloading the

engine and leaving clumps of mulched

grass, For extremely heavy mulching,

reduce your width of cut by overlapping

previously cut path and mow slowly.

• Certain types of grass and grass conditions

may require that an area be mulched a

second time to completely hide the

clippings, When doing a second cut, mow

across or perpendicular to the first cut path.

° Change your cutting pattern from week to

week. Mow north to south one week then

change to east to west the next week. This

will help prevent matting and graining of the

fawn_

Max 1/3

_A 'NTENA_]C E ls CH EDUL _ .... l__)_y o_b_ o o ge._._o

REGULAR SERVICE /_/ SERVICE DATES

Check for Loose Fasteners .................................... !/' ......................

Clean/inspect Grass Catcller

(.Equipped) ,'LmL__V'

M Clean LawnMower

O Clean Under Drive Cover(PowePPropelled Mowers! ............

Check drive belt/pulleys

E (Power,Propel!ed Mowers)

a ChecldSharperdReplace Blade

Lubrication Chart

.... 1/_ ti'

v' v' t

N iClean or Replace Spark Plug If'

E Replace A_FFiller Paper Cadridge t/'2

i * Change more often whsn oper_ling Under a hea','y load or in high ambient lemperalures

2_- Service mote often when operallng in dirty or dusly condlllons

3, Replace blades rno_e oltenwhen mowing tn sandy soil

4 Charge 48 hours al end of season

Clean BatlerylRech arge

{Electric Start Mowers) _ V' ...... i i _4 .........................................

Check Engine Oil Level t/

Clean Air Filter .......... ............. _ 2

inspec! Muffler V'

GENERAL RECOtVIMENDATIONS

The warranty or] this lawn mower does not

cover items that have been subjected to

operator abuse or negligence. To receive

full value from the warranty operator must

maintain mower as instructed in this

manual

Sorne adjustments will need to be made

periodically to properly maintain your unit

All adjustments in the Service and

Adjustments section of this manual should

be checked at least once each season

*Once a year, replace the spark plug,

replace air filter element and check

blade for wear A new spark plug and

clean/new air filter element assures

proper aiPfuel mixture and helps your

engine run better and last longer

° Follow the maintenance schedule in this

manual

BEFORE EACH USE

,Check engine oil level°

,Check for loose fasteners°

LUBRICATION

Keep unit well lubricated (See "LUBRICA-

TION CHART)

LUBRICATION CHART

Wheel adjuster Engine oil

Rear door hinge

Handle bracket mounting pin

Spray lubricant

(_) Refer to Maintenance "ENGINE" section,

IMPORTANT: Do not oil or grease plastic

wheel bearings Viscous lubricants will attract

dust and dirt that will shorten the life of the self

lubricating bearings If you feel they must be

lubricated, use only a dry powdered graphite

type lubricant sparingly

Inhaltsverzeichnis

Sprachen:

Andere Craftsman Rasenmäher Handbücher

Craftsman

Craftsman 917.276180 Bedienungsanleitung

Craftsman

Craftsman 917.25891 Bedienungsanleitung

Craftsman

Craftsman 247.28904 Bedienungsanleitung

Craftsman

Craftsman 917.370872 Bedienungsanleitung

Craftsman

Craftsman 917.374030 Bedienungsanleitung

Craftsman

Craftsman 9*17.255940 Bedienungsanleitung

Craftsman

Craftsman T100 Series Bedienungsanleitung

Craftsman

Craftsman 917.25148 Bedienungsanleitung

Craftsman

Craftsman 917.374353 Bedienungsanleitung

Craftsman

Craftsman 917.376156 Bedienungsanleitung

Craftsman

Craftsman 917.255560 Bedienungsanleitung

Craftsman

Craftsman 917.378530 Bedienungsanleitung

Craftsman

Craftsman 25832 Bedienungsanleitung

Craftsman

Craftsman 917.28008 Bedienungsanleitung

Craftsman

Craftsman 27712 Bedienungsanleitung

Craftsman

Craftsman 247.282820 Bedienungsanleitung

Craftsman

Craftsman 944.362080 Bedienungsanleitung

Craftsman

Craftsman 917.271831 Bedienungsanleitung

Craftsman

Craftsman 917.271140 Bedienungsanleitung

Craftsman

Craftsman 917.274951 Bedienungsanleitung

Craftsman

Craftsman ZT 7000 Bedienungsanleitung

Craftsman

Craftsman 917.27668 Bedienungsanleitung

Craftsman

Craftsman 917.9994A Bedienungsanleitung

Craftsman

Craftsman 917.2565 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung