Craftsman 917.377991 Bedienungsanleitung

Owner's Manual

IVlllM°

ROTARY LAWN MOWER

Model No.

917.377991

o Safety

oAssembly

Operation

Maintenance

oEspaSoi

-Repair Parts

CAUTION:

Read and follow all

Safety Rules and Instructions

before operating this equipment

Sears, Roebuck and Co., Hoffman Estates, IL 60179

Visit our Craftsman website: www_sears,com/craftsman

Warranty 2 Product Specifications 11

Safety Rules 2 Service and Adjustments 14

Assembly 4 Storage 16

Operation 6 Troubleshooting 17

Maintenance Schedule t0 Repair Parts 37

Maintenance 10 Parts Ordering Back Cover

LIMITED TWO YEAR WARRANTY ON CRAFTSMAN POWER MOWER

For two years from date of purchase, when this Craftsman Lawn Mower is maintained,

lubricated, and tuned up according to the operating and maintenance instructions in the

owner's manual, Sears wil! repair free of charge any defect in material or workmanship.

If this Craftsman Lawn Mower is used for commercial or rental purposes, this warranty

applies for only 90 days from the date of purchase.

This Warranty does not cover:

•Expendable items which become worn during normal use, such as rotary mower

blades, blade adapters, belts, air cleaners and spark plug.

o Repairs necessary because of operator abuse or negligence, including bent crank-

shafts and the failure to maintain the equipment according to the instructions con-

tained in the owner's manual.

Warranty sen,ice is available by returning the Craftsman power mower to the nearest

Sears Service Center/Department in the United States. This warranty applies only while

this product is in use in the United States.

This Warranty gives you specific legal rights, and you may also have other rights which

vary from state to state.

SEARS, ROEBUCK AND CO., D/817 WA, HOFFMAN ESTATES, ILLINOIS 60179

Safety standards require operator

presence controls to minimize the

risk of injury_ Your unit is equipped

with such controls. Do not attempt to

defeat the function of the operator

presence controls under any

circumstances.

TRAINING;

° Read this operator's manual carefully.

Become familiar with the controls and

know how to operate your mower

properly° Learn how to quickly stop

mower.

,Do not allow children to use your mower.

Never allow adults to use mower without

proper instructions°

o Keep the area of operation clear of all

persons, especially small children and

pets.

,Use mower only as the manufacturer

intended and as described in this

manual 2

• Do not operate mower if it has been

dropped or damaged in any manner.

Always have damage repaired before

using your mower°

° Do not use accessory attachments that

are not recommended by the manufac-

turer. Use of such attachments may be

hazardous.

°The blade turns when the engine is

running.

PREPARATION"

° Always thoroughly check the area to be

mowed and clear it of all stones, sticks,

wires, bones, and other foreign objects.

These objects will be thrown by the

blade and can cause severe injury.

° Always wear safety glasses or eye

shields when starting and while using

your mower.

° Dress properly. Do not operate mower

when barefoot or wearing open sandals.

Wear only solid shoes with good traction

when mowing.

o Checkfuel tankbeforestartingengine.

Do notfill gastankindoors,whenthe

engineis runningor whenthe engineis

hot,Allowthe engineto coolforseveral

minutesbeforefillingthe gas tank.Clean

off any spilledgasolinebeforestarting

the engine.

o Always make wheel height adjustments

beforestartingyour mower.Never

attemptto dothiswhiletheengineis

running.

• Mowonly in daylightor goodartificial

lighL

OPERATION:

o Keepyoureyes andmindon "your

mowerandthe areabeingcut. Donot let

other interests distract you.

o Do not mow wet or slippery grass. Never

run while operating your mower. Always

be sure of your footing -- keep a firm

hold on the handles and walk.

° Do not put hands or feet near or under

rotating parts. Keep clear of the dis-

charge opening at all time&

° Always stop the engine whenever you

leave or are not using your mower, or

before crossing driveways, walks, roads,

and any gravel--covered areas.

°Never direct discharge of material

toward bystanders nor allow anyone

near the mower while you are operating

it.

° Before cleaning, inspecting, or repairing

your mower, stop the engine and make

absolutely sure the blade and all moving

parts have stopped. Then disconnect the

spark plug wire and keep it away from

the spark plug to prevent accidental

starting,

° Do not continue to run your mower if you

hit a foreign object. Follow the procedure

outlined above, then repair any damage

before restarting and operating you

mower°

o Do not change the governor settings or

overspeed the engine. Engine damage

or personal injury may result.

o Do not operate your mower if it vibrates

abnormally. Excessive vibration is an

indication of damage; stop the engine,

safely check for the cause of vibration

and repair as required

° Do not run the engine indoors. Exhaust

fumes are dangerous°

o Never cut grass by pulling the mower

towards you° Mow across the face of

slopes, never up and down or you

might lose your footing. Do not mow

excessively steep slope& Use caution

when operating the mower on uneven

terrain or when changing directions

maintain good footing.

o Never operate your mower without

proper guards, plates, grass catcher or

other safety devices Jnp_ace.

MAINTENANCE AND STORAGE:

°Check the blade and the engine

mounting bolts often to be sure they are

tightened properly.

o Check all bolts, nuts and screws at

frequent intervals for proper tightness to

be sure mower is in safe working

condition°

° Keep all safety devices in place and

working°

° To reduce fire hazard, keep the engine

free of grass, leaves or excessive

grease and oil.

-Check grass catcher often for deteriora-

tion and wear and replace worn bags.

Use only replacement bags that are

recommended by and comply with

specifications of the manufacturer of

your mower.

° Always keep a sharp blade on your

mower°

° Allow engine to cool before storing in

any enclosure.

-Never store mower with fuel in the tank

inside abuilding where fumes may

reach an open flame or an ignition

source such as a hot water heater,

space heater, clothes dryer, etc.

ALook for this symbol to point out

important safety precautions. It means

CAUTION!!! BECOME ALERT!!! YOUR

SAFETY IS INVOLVED°

_I,CAUTION: Always disconnect spark

plug wire and place wire where it cannot

contact spark plug in order to prevent

accidental starting when setting up,

transporting, adjusting or making repairs.

AWARNING

The engine exhaust from this product

contains chemicals known to the State of

California to cause cancer, birth defects,

or other reproductive harm.

These accessories were available when this lawn mower was produced. They are not

shipped with your mower. They are also available at most Sears retail outlets and service

centers. Most Sears stores can atso order repair parts for you, when you provide the model

number of your lawn mower. Some of these accessories may not apply to your lawn mower.

LAWN,,M,OWER PERFORMANCE

CLIPPING DEFLECTOR

FOR REAR DISCHARGE LAWN MOWERS MULCHER KITS

GRASS CATCHERS

FOR

REAR DISCHARGE

LAWN MOWERS

f- GRASS CATCHERS

FOR

SIDE DISCHARGE

LAWN MOWERS

, illllllllll

STABILIZER

GAS CANS

LAWN MOWER MAINTENANCE

MUFFLERS

...... ,,, u,.,.i AIR FILTERS

lu i,..ul i i

BLADES BLADE ADAPTERS WHEELS

BELTS

SPARK PLUGS

ENGINE OIL

Read these instructions and this manual in its

entirety before you attempt to assemble or

operate your new lawn mower,

IMPORTANT: This lawn mower is shipped

WITHOUT OiL OR GASOLINE in the engine,

",(ournew lawn mower has been assembled

at the factory with the exception of those parts

left unassembled for shipping purposes. All

parts such as nuts, washers, bolts, etc.,

necessary to complete the assembly have

been placed in the parts bag. To ensure safe

and proper operation of your lawn mower, at!

parts and hardware you assemble must be

tightened securely. Use the correct tools as

necessary to ensure proper tightness.

TO REMOVE LAWN MOWER FROM

CARION

• Remove loose parts included with mower.

oCut down two end comers of carton and

lay end panel down flat,

o Remove all packing materials except

padding between upper and lower handle

and padding holding operator presence

control bar to upper handle.

° Roll lawn mower out of carton and check

carton thoroughly for additional loose

parts.

HOW TO SET UP YOUR LAWN MOWER

TO UNFOLD HANDLE

IMPORTANT: Unfold handles carefully so as

not to pinch or damage control cables_

• Raise handles until lower handle section

locks into place in mowing position.

= Remove protective padding, raise upper

handle section into place on lower handle

and tighten both handle knobs.

° Remove handle padding holding operator

presence control bar to upper handle°

° Your lawn mower handle can be adjusted

for your mowing comfort. Refer to "Adjust

Handle" in the Service and Adjustment

section of this manual

Operator presence control

barUpper handle "-_ //// Lift up

uftup \//!L

_'__"-_,_/_=_ ._ Mowing

/position

Lower handle

TO INSTALL ATTACHMENTS

Your lawn mower was shipped ready to be

used as a mulcher. To convert to bagging or

discharging:

,, Open rear door and remove mulcher plug.

Store mulcher plug in a safe place.

o You can now install catcher or optional

clipping deflector_

o To retum to mulching operation, install

mulcher plug into discharge opening of

mower° Be sure all tabs are seated

properly.

Mulcher plug

ACAUTION: Do not run your lawn

mower without mulcher plug in place or

approved clipping deflector or grass

catcher in place. Never attempt to

operate the lawn mower with the rear

door removed or propped open.

KNOW YOUR LAWN MOWER

READ THIS OWNER'S MANUALAND SAFETY RULES BEFORE OPERATING YOUR LAWN

MOWER, Compare the illustrations with your lawn mower to familiarize yourself with the

location of various controls and adiustments. Save this manual for future reference.

Thesesymbolsmay appearonyourlawnmoweror inliterature suppliedv_lf=tfleproduct.Learn and understand

theremeaning.

CAUTION ENGINE ENGINE FAST SLOW CHOKE FUEL OIL DANGER, KEEP HANDS

OR WARNING ON OFF AND FEET AWAY

Engine zone control cable Operator presence control bar

Drive control lever

Starter handle

Grass

Mulcher plug

Gasoline cap

Handle knob

Engine oil

cap w!

dipstick

Housing

Drive cover

Primer

IMPORTANT: 3_is lawn mower is shipped Wheel adjuster

WITHOUT OIL OR GASOLINE in the engine. (on each wheel)

MEETS CPSC SAFETY REQUIREMENTS

Sears rotary walk-behind power lawn mowers conform to the safety standards of the American

National Standards Institute and the U,S° Consumer Product Safety Commission. The blade

tums when the engine is running,

Operator presence control bar - must be

held down to the handle to start the engine.

Release to stop the engine.

Primer - pumps additional fuel from the

carburetorto the cylinderfor use when starting

acoldengine.

Starter handle- used for starting the engine.

Drive control lever -used to engage power-

propelled forward motion of lawn mower.

Mulcher plug - must be removed to convert to

bagging or discharging operation.

The operation of any lawn

mower can result in foreign

objects thrown into the eyes,

which can result in severe eye damage.

Always wear safety glasses or eye shields

while operating your lawn mower or

performing any adjustments or repairs°

We recommend a wide vision safety mask

over spectacles or standard safety

glasses.

HOWTO USEYOUR LAWN MOWER

"ENGINE SPEED

The engine speed was set at the factory

for optimum performance. Speed is not

adjustable.

ENGINE ZONE CONTROL

&CAUTION: .Federal regulations require

an engine control to be installea on this

lawn mower in order to minimize the risk

of blade contact injury. Do not under any

circumstances attempt to defeat the

function of the operator control. The blade

turns when the engine is running°

• Your lawn mower is equipped with an

operator presence control bar which

requires the operator to be positioned

behind the lawn mower handle to start and

operate the lawn mower.

TO ADJUST CUTTING HEIGHT

o Raise wheels for low cut and lower wheels

for high cut.

• Adjust cutting height to suit your require-

ments. Medium position is best for most

lawns.

° To change cutting height, squeeze adjuster

lever toward wheel Move wheel up or

down to suit your requirements. Be sure all

wheels are in the same setting.

NOTE; Adjuster is properly positioned

when plate tab inserts into hole in lever.

Also, 9-position adjusters (if so equipped)

allow lever to be positioned between the

plate tabs.

Plate Tab

LowerWheelsf°rHighC_o._b.__,.__._.

__ Lever

Raise Wheels for Low Cut

TO ATTACH GRASS CATCHER

° Close the lift top tid_ Lift top lid must be

closed while operating lawn mower°

° Lift the rear door on the mower housing

and place the grass catcher frame onto the

formed tabs on the rear door hinge

bracket.

° The grass catcher is secured to the lawn

mower housing when the rear door is

lowered onto the grass catcher frame,

ACAUTION: Do not run your lawn

mower without clipping deflector or

approved grass catcher in place_ Never

attempt to operate the lawn mower with

the rear door removed or propped open.

Hinge

bracket Rear door

Grass catcher

frame

Formed

tabs

TO EMPTY GRASS CATCHER

• To remove grass catcher, release operator

presence control bar to stop engine°

° Lift up rear door and remove the grass

catcher by the handle.

NOTE: Do not drag the bag when

emptying; it will cause unnecessary wear°

DRIVECONTROL

o Self-propellingiscontrolledby holding

the operatorpresencecontrol bardown

to the handleand pushing the drive

control lever forward until it clicks; then

release the lever.

° Forward motion will stop when the

operator presence control bar is

released. To stop forward motion

without stopping engine, release the

operator presence control bar slightly

until the drive control disengages° Hold

operator presence control bar down to

handle to continue mowing without self-

propelling.

o To keep drive control engaged when

turning corners, push down on handle

and lift front wheels off ground while

turning lawn mower.

Operator presence control bar Drive

control

To engage drive Drive control

control disengaged

BEFORE STARTING ENGINE

OIL

Your lawn mower is shipped without oil in the

engine.

• Be sure mower is level and area around oil

fill is clean.

° Remove engine oil cap and fill to the full

line on the dipstick.

NOTE: Allow oil to settle down into engine

for accurate dipstick reading,

• Engine holds 27 oz& of oil. For type and

grade of oil to use, see "ENGINE" in

Maintenance section of this manual.

° Pour oi! slowly. Do not over fill.

° Check oil level before each use. Add oil if

needed. Fill to full line on dipstick.

• To read proper level, tighten engine oil cap

each time.

° Reinstall engine oil cap and tighten.

° Change the oil after every 25 hours of

operation or each season. You may need

to change the oil more often under dusty,

dirty conditions.

ADD GASOLINE

o FTttfuel tank° Use fresh, clean, regular

unleaded gasoline with a minimum of 87

octane. Do not mix oil with gasoline.

Purchase fuel in quantities that can be

used within 30 days to assure fuel

freshness.

_WARNING: Experience indicates that

alcohol blended fLiels (called gasohol or

using ethanol or methanol) can attract

moisture which leads to separation and

formation of acids during storage. Acidic gas

can damage the fuel system of an engine

while in storage. To avoid engine problems,

the fuel system should be emptied before

storage of 30 days or longer. Drain the gas

tank, start the engine and let it run until the

fuel lines and carburetor are empty° Use

fresh fuel next season. See Storage

Instructions for additional information. Never

use engine or carburetor cleaner products in

the fuel tank or permanent damage may

occur.

ACAUTION: Fill to bottom of gas tank

filler neck. Do not overfill. Wipe off any

spilled oil or fuel. Do not store, spill or

use gasoline near an open flame.

Gasoline filler cap Engine oilcap

TO START ENGINE

°To start a cold engine, push primer three

(3) times before trying to start° Use a firm

push. This step is not usually necessary

when starting an engine which has

already runfor a few minutes.

° Hold operator presence control bar down

to the handle and pull starter handle

quickly. Do not allow starter rope to snap

back.

• To stop engine, release operator presence

control bar.

NOTE: In cooler weather it may be

necessary to repeat priming steps. In

warmer weather over priming may cause

flooding and engine will not start° If you

do flood engine, wait a few minutes

before attempting to start and do not

repeat priming steps.

MOWING TIPS

o Under certain conditions, such as very

tall grass, it may be necessary to raise

the height of cut to reduce pushing effort

and to keep from overloading the engine

and leaving clumps of grass clippings It

may also be necessary to reduce

ground speed and/or run the lawn

mower over the area a second time,

o For extremely heavy cutting, reduce the

width of cut by overlapping previously

cut path and mow slowly.

o For better grass bagging and most

cutting conditions, the engine speed

should be set in the fast position.

o When using a rear discharge lawn

mower in moist, heavy grass, clumps of

cut grass may not enter the grass

catcher. Reduce ground speed (push-

ing speed) and/or run the lawn mower

over the area a second time_

° if a trail of clippings is left on the right

side of a rear discharge mower, mow in

a clockwise direction with a small

overlap to collect the clippings on the

next pass.

• Pores in cloth grass catchers can

become filled with dirt and dust with use

and catchers will collect less grass. To

prevent this, regularly hose catcher off

with water and let dpj before using.

oKeep top of engine around starter clear

and clean of grass clippings and chaff°

This will help engine air flow and extend

engine life,

MULCHING MOWING TIPS

IMPORTANT; For best performance, keep

mower housing free of built-up grass and

trash. See "Cleaning" in Maintenance section

of this manual,.

oThe special mulching blade will recut the

grass clippings many times and reduce

them in size so that as they fall onto the

lawn they will disperse into the grass and

not be noticed. Also, the mulched grass will

biodegrade quickly to provide nutrients for

the lawn, Always mulch with your highest

engine (blade) speed as this will provide the

best recutting action of the blades.

•Avoid cutting your lawn when it is wet. Wet

grass tends to form clumps and interferes

with the mulching action. The best time to

mow your lawn isthe eady aftemoon_ At

this time the grass has dried and the newly

cut area will not be exposed to the direct

sun_

° For best results, adjust the lawn mower

cutting height so that the lawn mower cuts

off only the top one-third of the grass blades.

If the lawn is overgrown it will be necessary

to raise the height of cut to reduce pushing

effort and to keep from overloading the

engine and leaving clumps of mulched

grass. For extremely hearty mulching,

reduce your width of cut by overlapping

previously cut path and mow slowly°

oCertain types of grass and grass conditions

may require that an area be mulched a

second time to completely hide the

clippings° When doing a second cut, mow

across or perpendicular to the first cut path.

° Change your cutting pattern from week to

week. Mow north to south one week then

change to east to west the next week, This

will help prevent matting and graining of the

lawn.

Max 1/3

........€heck for Loose Fasteners

clear,Jlnspect Grass Catcher

(If Equipped) $/ ,64_

M .Clean Lawn Mower ......

O Clean Under Drive Cover

(Power-Propelled Mowers)

Check drive beitipuiieys

(P0we.r.rprop.eIledMowe rs)

ChecldSharpen/RepTac e Blade

Lubrication Chart

Clean Battery/Recharge

(Electric Start Mowers! ........

EC.heck Engine Oil Level Mi'

U C.hange Engine Oil

FILL IN DATES _,-_ _ ,k-_._ 5k_

AS YOU COMPLETE /__J_"

.,_'%?_-'Y_.q_" _'49"_ _ _ SERVICE DATES

........... _ _, _4 ..... ,,., . .,,....,.,,

GClean Air Filter i_' 2

........ . =

Iinspect Muffler ........ 6/

N C!ean 9_ ReP(ace Spark Piug ..... II/

EReplace Air Filter Paper Cartridge IV#2

1-Change more often when operating under a heavy load or in high ambient temperatures

2 - Service more oflen when opera_ng in dirty or dusly conditions

3- Replace blades more often when mowtng tn sandy soil

4 - Charge 48 hours at end of season.

GENERAL RECOMMENDATIONS

The warranty on this lawn mower does not

cover items that have been subjected to

operator abuse or negligence. To receive

full value from the warranty, operator must

maintain mower as instructed in this

manual°

Some adjustments will need to be made

periodically to properly maintain your unit°

All adjustments in the Service and

Adjustments section of this manual should

be checked at least once each season.

o Once a year, replace the spark plug,

replace air filter element and check

blade for wear. A new spark plug and

clean/new air filter element assures

proper air-fuel mixture and helps your

engine run better and last longer.

-Follow the maintenance schedule in this

manual.

BEFORE EACH USE

° Check engine oil level.

° Check for loose fasteners.

LUBRICATION

Keep unit well lubricated (See "LUBRICA-

TION CHART")°

LUBRICATION CHART

(_ Wheel adjuster

Rear door hinge

L'_ HandIe bracket mounting pin

["_'_.)Spray lubricant

(_) Refer to Maintenance "ENGINE" section,

Engine oil

IMPORTAI'tl': Do not oil or grease plastic

wheel bearings. Viscous lubricants will attract

dust and dirt that will shorten the life of the self

lubricating bearings, tf you feel they must be

lubricated, use only a dry, powdered graphite

type lubricant sparingly.

Inhaltsverzeichnis

Sprachen:

Andere Craftsman Rasenmäher Handbücher

Craftsman

Craftsman 25915 Bedienungsanleitung

Craftsman

Craftsman 486.243293 Bedienungsanleitung

Craftsman

Craftsman 917.388383 Bedienungsanleitung

Craftsman

Craftsman 917.272953 Bedienungsanleitung

Craftsman

Craftsman 28934 Bedienungsanleitung

Craftsman

Craftsman 917.370670 Bedienungsanleitung

Craftsman

Craftsman 917.385411 Bedienungsanleitung

Craftsman

Craftsman 247.375900 Bedienungsanleitung

Craftsman

Craftsman 917.388812 Bedienungsanleitung

Craftsman

Craftsman 247.3729 Bedienungsanleitung

Craftsman

Craftsman 25946 Bedienungsanleitung

Craftsman

Craftsman 917.251482 Bedienungsanleitung

Craftsman

Craftsman 917.272241 Bedienungsanleitung

Craftsman

Craftsman 917.376234 Bedienungsanleitung

Craftsman

Craftsman EZ3 917.273031 Bedienungsanleitung

Craftsman

Craftsman 917.256450 Bedienungsanleitung

Craftsman

Craftsman CMCMW270 Bedienungsanleitung

Craftsman

Craftsman 247.374900 Bedienungsanleitung

Craftsman

Craftsman 25832 Bedienungsanleitung

Craftsman

Craftsman Sears 944.602892 Bedienungsanleitung

Craftsman

Craftsman 917.378760 Bedienungsanleitung

Craftsman

Craftsman CTX 9000 Bedienungsanleitung

Craftsman

Craftsman 917.272244 Bedienungsanleitung

Craftsman

Craftsman 917.273421 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung