Craftsman 917.378070 Bedienungsanleitung

Owner's Manual

JCRAFTSMRN'J

6.0 HORSEPOWER

22" SIDE DISCHARGE

ROTARY LAWN MOWER

Model No.

917.378070

•Safety

• Assembly

• Operation

•Maintenance

•EspaRol

•Repair Parts

CAUTION:

Read and follow all

Safety Rulesand Instructions

before operating this equipment

Sears, Roebuck and Co., Hoffman Estates, IL 60179

VisitourCraftsmanwebeite:www.sears.com/craftsrnan

Warranty............................................... 2

Safety Rules......................................... 2

Assembly.............................................. 6

Operation.............................................. 6

Maintenance Schedule...................... 10

Maintenance....................................... 10

Product Specifications ........................ 11

Service and Adjustments .................... 14

Storage ............................................... 16

Troubleshooting ................................. 17

Repair Parts ........................................ 37

Parts Ordering ..................... Back Cover

LIMITEDTWO YEARWARRANTYON CRAFTSMAN POWER MOWER

Fortwoyears from dateofpurchase,whenthisCraftsmanLawnMowerismaintained,

lubricated,and tunedup accordingto the operatingand maintenanceinstructionsin

theowners manual,Searswillrepairfree of chargeanydefectin materialorworkman-

ship.

IfthisCraftsmanLawn Mowerisusedfor commercialor rentalpurposes,thiswarranty

appliesfor only90 daysfrom the dateof purchase.

ThisWarrantydoes notcover:

• Expendableitemswhichbecomewornduringnormaluse, suchas rotarymower

blades,blade adapters,Pelts,air cleanersand sparkplug.

•Repairsnecessarybecause of operatorabuse or negligence,includingbent

crankshaftsand the failure to maintainthe equipmentaccordingtothe instructions

containedin the owner'smanual.

Warranty service is available by retuming the Craftsman power mower to the nearest

Sears Service Center/Department in the United States. This warranty applies only

while this product is in use in the United States.

ThisWarrantygivesyou specificlegalrights,and you may alsohaveotherrightswhich

varyfrom statetostate,

Sears, Roebuckand Co., D/817 WA, HoffmanEstates,Illinois60179

IMPORTANT: This cutting machine is capable of amputating hands and feet and

throwing objects. Failure to observe the following safety instructions could result in

serious injury or death.

I.GENERAL OPERATION

•Road, understand, and follow all

instructions on the machine and in the

manual(s) before starting. Be thor-

oughly familiar with the controls and

the proper use of the machine before

starting. °

•Do not put hands or feet near or under

rotating parts. Keep clear of the

discharge opening at all times.

•Only allow responsible individuals, •

who are familiar with the instructions, to

operate the machine.

•Clear the area of objects such as °

rocks,toys, wire, bones, sticks, etc.,

which could be picked up and thrown

by the blade. 2

Be sure the area is clear of other

people before mowing. Stop machine if

anyone enters the area.

Do not operate the mower when

barefoot or wearing open sandals.

Always wear substantial foot wear.

Do not pull mower backwards unless

absolutely necessary. Always look

down and behind before and while

moving backwards.

Do not operate the mower without

proper guards, plates, grass catcher or

other safety protective devices in place.

See manufacturer's instructions for

proper operation and installation of

accessories. Only use accessories

approved by the manufacturer.

•Stop the blade(s) when crossing gravel

drives, walks, or roads.

• Stop the engine (motor) whenever you

leave the equipment, before cleaning

the mower or unclogging the chute.

•Shut the engine (motor) off and wait

until the blade comes to complete stop

before removing grass catcher.

• Mow only in daylight or good artificial

light.

•Do not operate the machine while

under the influence of alcohol or drugs.

•Never operate machine in wet grass.

Always be sure of your footing: keep a

firm hold on the handle and walk;

never run.

•Disengage the self-propelled mecha-

nism or drive clutch on mowers so

equipped before starting the engine

(motor).

•If the equipment should start to vibrate

abnormally, stop the engine (motor)

and check immediately for the cause.

Vibration is generally a waming of

trouble.

•Always wear safety goggles or safely

glasses with side shields when

operating mower.

II, SLOPE OPERATION

Slopes are a major factor related to slip

and fall accidents which can result in

severe injury. All slopes require extra

caution. If you feel uneasy on a slope, do

not mow it.

DO:

•Mow across the face of slopes: never

up and down. Exercise extreme

caution when changing direction on

slopes.

•Remove obstacles such as rocks, tree

limbs, etc.

•Watch for holes, ruts, or bumps. Tall

grass can hide obstacles.

DO NOT:

• Do not trim near drop-offs, ditches or

embankments. The operator could lose

footing or balance.

•Do not trim excessively steep slopes.

•Do not mow on wet grass. Reduced

footing could cause slipping.

II1. CHILDREN

Tragic accidents can occur if the operator

is not alert to the presence ofchildren.

Children are often attracted to the

machine and the mowing activity. Never

assume that children will remain where

you last saw them.

•Keep children out of the trimming area

and under the watchful care of another

responsible adult.

•Be alert and turn machine off if children

enter the area.

•Before and while walking backwards,

look behind and down for small

children.

•Never allow children to operate the

machine.

•Use extra care when approaching blind

comers, shrubs, trees, or other objects

that may obscure vision.

IV. SERVICE

•Use extra care in handling gasoline

and other fuels. They are flammable

and vapors are explosive.

- Use only an approved container.

-Never remove gas cap or add fuel

with the engine running. Allow

engine to cool before refueling. Do

not smoke.

-Never refuel the machine indoors.

- Never store the machine or fuel

container inside where there is an

open flame, such as a water heater.

•Never run a machine inside a closed

area.

•Never make adjustments or repairs

with the engine (motor) running.

Disconnect the spark plug wire, and

keep the wire away from the plug to

prevent accidental starting.

• Keep nuts and bolts, especially blade

attachment bolts, tight and keep

equipment in good condition.

•Never tamper with safely devices.

Check their proper operation regularly.

•Keep machine free of grass, leaves, or

other debris build-up. Clean oil or fuel

spillage. Allow machine to cool before

storing.

•Stop and inspect the equipment if you

strike an object. Repair, if necessary,

before restarting.

•Never attempt to make wheel height

adjustments while the engine (motor) is

running.

•Grass catcher components are subject

to wear, damage, and deterioration,

which could expose moving parts or

allow objects to be thrown. Frequently

check components and replace with

manufacturers recommended parts,

when necessary.

•Mower blades are sharp and can cut.

Wrap the blade(s) or wear gloves, and

use extra caution when servicing them.

•Do not change the engine governor

3 setting or overspeed the engine.

J&Look for this symbol to point out

important safety precautions. It means

CAUTIONt!t BECOMEALERTI!! YOUR

SAFETY IS INVOLVED.

WARNING: In order to prevent

accidental starting when setting up,

transpoding, adjusting or making repairs,

always disconnect spark plug wire and

place wire where it cannot contact spark

plug.

.4,WARNING: Engineexhaust,someofits

constituents,and certainvehiclecompo-

nentscontainor emitchemicalsknownto

the State of CalJfom,_tocausecancer

and birthdefectsor otherreproductive

harm.

_WARNING: Batteryposts,terrolnalsant

relatedaccessoriescontainlead and

lead compounds, chemicalsknowntothe

State ofCaliforniato causecancerand

bidhdefectsorotherreproductiveharm.

Wash handsafter handling.

Theseaccessorieswereavailablewhenthislawnmowerwasproduced.Theyare not

shippedwi_ yourmower.Theyarealsoavailal_eatmostSearsretailoutletsandservice

centers.M_t Seatsstorescana/soorderrepairpartsforyou,whenyouprovidethemodel

nurrt_rofyourlawnmower,Someoftheseaccessoriesmaynotapplytoyourlawnmower.

LAWN MOWER PERFORMANCE

CUPPING DEFLECTOR

FOR REAR DISCHARGE LAWN MOWERS

GRASS CATCHERS

FOR

REAR DISCHARGE

LAWN MOWERS

MULCHER KITS

GRASS CATCHERS

FOR

SIDE DISCHARGE

LAWN MOWERS

STA_UT._R

GAS CANS

LAWN MOWER MAINTENANCE

MUFFLERS

BELT8 ., 8LADES •

AIR FILTERS

BLADE ADAPTERS WHEELS

SPAR,K pLUGS

ENGINE OIL

Read these instructions and this manual

in its entirety before you attempt to

assemble or operate your new lawn

mower.

IMPORTANT: This lawn mower is

shipped WITHOUT OIL OR GASOLINE in

the engine.

Your new lawn mower has been as-

sembled at the factory with the exception

of those parts left unassembled for

shipping purposes. All parts such as nuts,

washers, bolts, etc., necessary to com-

plete the assembly have been placed in

the parts bag. To ensure safe and proper

operation of your lawn mower, all parts

and hardware you assemble must be

tightened securely. Use the correct tools

as necessary to ensure proper tightness.

TO REMOVE LAWN MOWER FROM

CARTON

1. Remove loose parts included with

mower.

2. Cut down two end comers of carton

and lay end panel down flat.

3. Remove all packing matedals except

padding between upper and lower

handle and padding holding operator

presence control bar to upper handle.

4. Roll lawn mower out of carton and

check carton thorougly for additional

loose pads.

HOWTO SET UPYOUR LAWN

MOWER

TO UNFOLD HANDLE

IMPORTANT: Unfold handle carefully so

as not to pinch or damage control cables.

1. Raise handles until lower handle

section locks into place in mowing

position.

2. Remove protective padding, raise

upper handle section into place on

lower handle and tighten both handle

knobs.

3. Remove handle padding holding

operator presence control bar to

upper handle.

Your lawn mower handle can be adjusted

for your mowing comfort. Refer to "Adjust

Handle" in the Service and Adjustments

section of this manual.

Operator

control bar

Upper handle

Lift up

handle

KNOWYOUR LAWN MOWER

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR

LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself

with the location of various controls and adjustments, Save this manual for future

These symbols may appearonyour lawn moweror in literature suppliedwiththe

product. Learnand understandtheirmeaning.

CAUTION ENGINE ENGINIE FAST SLOW CHOKE FUEL OIL DANGER, KEEP HANDS

OR WARNff_G ON OFF ANO FEET AWAY

Throttle

presence controlbar

control lever

Handle knob zone control cable

Engine oil cap w/dipstick

Housing

cover

IMPORTANT:Thislawnmowerisshipped _.Wheeladjuster

withoutoilor gasoline in theengine. (oneve_jwheel)

MEETS CPSC SAFETY REQUIREMENTS

Sears rotarywalk-behindpowerlawnmowersconform tothe safetystandardsofthe

Amedc_nNationalStandardsInstituteand theU.S. ConsumerProductSafetyCommis-

sion. The bladeturnswhenthe engineisrunning.

Operator presence control bar - must

be held down to the handle to start the

engine. Release to stop the engine,

Primer -pumps additional fuel from the

carburetor to the cylinder for use when

starting a cold engine.

Starter handle- used for starting the

engine.

Drive control lever - used to engage

power-propelled forward motion of lawn

mower,

Throttle control - Used for starting the

engine and allows you to select either

fast or slow engine speed.

The operationof any lawn

mowercan resultin

foreign objectsthrowninto

theeyes,whichcan result

in severeeye damage.

Alwayswearsafetyglassesor eye

shieldswhileoperatingyour lawn mower

orperformingany adjustmentsor repairs.

We recommenda widevisionsafety

maskoverspectaclesor standardsafety

glasses.

HOWTO USEYOUR LAWN MOWER

ENGINE SPEED

The engine speed is controlled by a

throttle located on the side of the upper

handle. Fast position is for starting,

normal cutting, trimming and better grass

bagging. Slow position is for light cutting,

tdmming and fuel economy.

Slow

Fast ,'-";.

ENGINE ZONE CONTROL

_CAUl"ION: Federal regulations require

an engine control to be installed on this

lawn mower in order to minimize the dsk

of blade contact injury. Do not under any

circumstances attempt to defeat the

function of the operator control. The blade

turns when the engine is running.

• Your lawn mower is equipped with an

operator presence control bar which

requires the operator to be positioned

behind the lawn mower handle to start

and operate the lawn mower.

TO ADJUST CUTFING HEIGHT

Raise wheels for low cut and lower

wheels for high cut, adjust cutting height

to suit your requirements. Medium

position is best for most lawns.

•To change cutting height, squeeze

adjuster lever toward wheel. Move

wheel up or down to suit your require-

ments. Be sure all wheels are in the

same setting..

NU1 E: Aajuster Js properly positioned

when plate tab inserts into hole in lever.

Also, 9-position adjusters (if so equipped)

allow lever to be positioned between the

plate tabs. PlateTab

LowerWheelsfor HighCutr.___

Raise WheelsforLowCut

TO CONVERTTO DISCHARGING

MOWER

Your mower is shipped ready to be used

as a mufcher.To convert to bagging or

discharging:

•Lift discharge guard and remove

mulcher plate.

•Mower can now be used for side

discharging or optional grass catcher

can be attached.

•To retum to mulching operation, simply

reinstall mulcher plate as shown.

_iLCAUTION: Do not run your lawn

mower without discharge guard, ap-

proved grass catcher or mulcher plate in

place. Dischargeguard

Mulcherplats

DRIVECONTROL

•Self-propellingis controlledby holding

theoperatorpresencecontrolbar down

tothe handleand pushingthe drive

controlleverforward untilitclicks;then

releasingthe lever.

•Forwardmotionwillstopwhen the

operatorpresencecontrolbar is

released.To stopforward motion

withoutstoppingengine,release the

operatorpresencecontrolbar slightly

untilthe drivecontroldisengages.Hold

operatorpresencecontrolbar down

against handleto continuemowing

Withoutself-propelling.

•To keep drivecontrolengaged when

turningcomers,pushdownon handle

and liftfront wheelsoffgroundwhile

turninglawn mower.

Operator presence control bar

Drive Drive

control control

To engage Drive control

ddve control disengaged

BEFORE STARTING ENGINE

ADD OIL

Yourlawnmoweris shippedwithoutoil in

the engine.Engineholds 20 oz.of oil.

Fortypeand grade ofoiltouse, see

=ENGINE"in Maintenancesectionof this

manual.

1. Be sure lawnmoweris leveland area

aroundoilfill isclean.

2. Removeengine oilcap and fill tothe

full lineon thedipstick.Pouroilslowly.

Do notoverfill.

NOTE: Allowoiltosettledownintoengine

for accuratedipstickreading.To read

properlevel,tightenengineoil cap, then

removeitto read thedipstick.

3. Reinstallengine oilcap and tighten.

•Chockoillevelbeforeeach use. Add

oilifneeded. Fillto full lineondipstick.

•Changethe oilaftereven/25 hoursof

operationor eachseason. You may

need to changetheoil moreoften

underdusty,dirtyconditions.

ADD GASOLINE

NOTE: Before filling fuel tank, remove

and discard the debris plug that is inside

the tank.

• Fillfuel tank. Use fresh, clean, regular

unleaded gasoline with a minimum of

87 octane. Do not mix oil with gaso-

line. Purchase fuel in quantities that

can be used within 30 days to assure

fuel freshness.

_WARNING: Experience indicates that

alcohol blended fuels (called gasohol or

using ethanol or methanol) can attract

moisture which leads to separation and

formation of acids during storage. Acidic

gas can damage the fuel system of an

engine while in storage. To avoid engine

problems, the fuel system should be

emptied before storage of 30 days or

longer. Drain the gas tank, start the

engine and let it run until the fuel lines

and carburetor are empty. Use fresh fuel

next season, See Storage Instructions for

additional information. Never use engine

or carburetor cleaner products in the fuel

tank or permanent damage may occur.

ACAUTION: Fill to bottom of gas tank

filler neck. Do not overfill. Wipe off any

spilled oil or fuel. Do not store, spill or

use gasoline near an open flame.

Gasolinefillercap Engineoilcap

(Discard

debris plug

inside)

TO START ENGINE

NOTE: Due to protoctive coatings on the

engine, a small amount of smoke may be

present during the initial use of the

product and should be considered

normal.

1. To start a cold engine, push primer

three (3) times before trying to start.

Use a firm push. This step is not

usually necessary when starting an

engine which has already run for a

few minutes.

2. Move throttle control lever to fast

position.

3. Hold operator presence control bar

down to the handle and pull starter

handle quickly. Do not allow starter

rope to _r_a_ back.

MUWINU TiPS

• Under cedain conditions, such as very

tall grass, it may be necessary to raise

the height of cut to reduce pushing

effort and to keep from overloading the

engine and leaving clumps of grass

clippings. It may also be necessary to

reduce ground speed and/or run the

lawn mower over the area a second

time.

•For extremely heavy cutting, reduce the

width of cut by overlapping previously

cut path and mow slowly.

•For better grass bagging and most

cutting conditions, the engine speed

should be set in the fast position.

• When using a rear discharge lawn

mower in moist, heavy grass, clumps of

cut grass may not enter the grass

catcher. Reduce ground speed

(pushing speed) and/or run the lawn

mower over the area a second time.

•If a trail of clippings is left on the dght

side of a rear discharge mower, mow in

a clockwise direction with a small

ovedap to collect the clippings on the

next pass.

•Pores in cloth grass catchers can

become filled with dirt and dust with

use and catchers will collect less grass.

To prevent this, regularly hose catcher

off with water and let dry before using.

•Keep top of engine around starter clear

and clean of grass clippings and chaff.

This will help engine air flow end

extend engine life.

MULCHING MOWING TIPS

IMPORTANT: For best performance,

keep mower housing free of built-up

grass and trash. See "Cleaning" in

MAINTENANCE section of this manual.

•The special mulching blade will recur

the grass clippings many times and

reduce them in size so that as they fall

onto the lawn they will disperse into the

grass and not be noticed. Also, the

mulched grass will biodegrade quickly

to provide nutrients for the lawn.

Always mulch with your highest engine

(blade) speed as this will provide the

best recutting action of the blades.

•Avoid cutting your lawn when it is wet.

Wet grass tends to form clumps and

interferes with the mulching action. The

best time to mow your lawn is the eady

afternoon. At this time the grass has

dded and the newly cut area will not be

exposed to the direct sun.

•For best results, adjust the lawn mower

cutting height so that the lawn mower

cuts off only the top one-third of the

grass blades. If the lawn is overgrown it

will be necessary to raise the height of

cut to reduce pushing effort end to keep

from overloading the engine and

leaving clumps of mulched grass. For

extremely heavy mulching, reduce your

width of cut by overlapping previously

cut path and mow slowly.

•Certain types of grass and grass

conditions may require that an area be

mulched a second time to completely

hide the clippings. When doing a

second cut, mow across or perpendicu-

lar to the first cut path.

•Change your cutting pattern from week

to week. Mow north to south one week

then change to east to west the next

week. This will help prevent matting

and graining of the lawn.

RE O RSERV,CE SERV,CEOATES

Check for Loose Fasteners I_ IS'

Clean/Inspect Grass Catcher

(ifEquipped)

MC,eanLawnMower _' _/

O CleanUnderDriveCover(Power-PropelledMowers)

Checkdrivebelt/ulfflys

E (Power.Prope_leaPMowers) I//

CbecldSharpen/Replace Blade _:_

LubricationChart _/ !/

Clean Sattery/Rechar

IElectdcStart Mowe_ e II/ 11/4

ECheck En_line OilLevel

N Change Engine Oil I_1.2

GCJ,eanAirFilter I_ 2

IInspectMuffler

NClean or Replace Spad( Plug

E Replace Air Rlter Paper Cadddge I/2

1 * Change mole often1_nea o_ef_In 9 und4N'aheavy Ioed or in highamblerd tel1_eratums,

2 * Service more olten when ope_a_3g in ditty or dustyconditinns,

3-R_olace bindes more often when mowing In undy oo41,

4°Charoe 48 hours at lind of aeason.

GENERAL RECOMMENDATIONS

The warranty on this lawn mower does

ROtcover items that have been subjected

to operator abuse or negligence. To

receive full value from the warranty,

operator must maintain mower as

instructed in this manual.

Some adjustments will need to be made

pedodically to properly maintain your

unit.

All adjustments in the Service and

Adjustments section of this manual

should be checked at least once each

season.

• Once a year, replace the spark plug,

clean or replace air filter element and

check blade for wear. A new spark

plug and clean/new air filter element

assures proper air-fuel mixture and

helps your engine run better and last

longer.

•Follow the maintenance schedule in

this manual.

BEFORE EACH USE

1. Check engine oil level.

2. Check for loose fasteners.

LUBRICATION

Keep unit well lubricated (See "LUBRI-

CATION CHART").

LUBRICATION CHART

Wheel Adjuster

(_ Rear door hinge

_) Handle bracket

mounting pin

_) Refer to maintenance "Engine" section,

(_ Spray lubricant

IMPORTANT: Do not oil or grease

plastic wheel bearings, viscous lubd-

cants will attract dust and dirtthat will

shorten the life of the self-lubricating

bearings, if you feel they must be

lubricated, use only a dry, powdered

graphite type lubricant sparingly.

Inhaltsverzeichnis

Andere Craftsman Rasenmäher Handbücher

Craftsman

Craftsman 917.379243 Bedienungsanleitung

Craftsman

Craftsman 917.388895 Bedienungsanleitung

Craftsman

Craftsman 917.272231 Bedienungsanleitung

Craftsman

Craftsman 917.27537 Bedienungsanleitung

Craftsman

Craftsman 917.387612 Bedienungsanleitung

Craftsman

Craftsman 917.370721 Bedienungsanleitung

Craftsman

Craftsman 917.272232 Bedienungsanleitung

Craftsman

Craftsman 917.378781 Bedienungsanleitung

Craftsman

Craftsman 917.374062 Bedienungsanleitung

Craftsman

Craftsman 917.275223 Bedienungsanleitung

Craftsman

Craftsman 247.288811 Bedienungsanleitung

Craftsman

Craftsman 247.374330 Bedienungsanleitung

Craftsman

Craftsman 917.254850 Bedienungsanleitung

Craftsman

Craftsman 917.276070 Bedienungsanleitung

Craftsman

Craftsman 917.374095 Bedienungsanleitung

Craftsman

Craftsman 917.275023 Bedienungsanleitung

Craftsman

Craftsman EZ3 917.387301 Bedienungsanleitung

Craftsman

Craftsman 917.259542 Bedienungsanleitung

Craftsman

Craftsman 917.28928 Bedienungsanleitung

Craftsman

Craftsman 37763 Bedienungsanleitung

Craftsman

Craftsman 247.372370 Bedienungsanleitung

Craftsman

Craftsman 917.372751 Bedienungsanleitung

Craftsman

Craftsman 917.271023 Bedienungsanleitung

Craftsman

Craftsman LAWN TRACTOR 917.27105 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung