Craftsman 917.378431 Bedienungsanleitung

Owner's Manual

JCRRFTSMRWI

6.75 HORSEPOWER

21" REAR DISCHARGE

POWER PROPELLED

ROTARY LAWN MOWER

Model No.

917.378431

•Safety

• Assembly

• Operation

• Maintenance

•Espa_ol

•Repalr Parts

CAUTION:

Read and follow all

Safety Rules and Instructions

before operating this equipment

Sears, Roebuck and Co., Hoffman Estates, IL 60179

Visit our Craftsman website: www.sears.corrVcraffsman

Warranty ................................................. 2Product Specifications .......................... 11

Safety Rules ........................................ 2-4 Service and Adjustments................. 13-14

Assembly ............................................. 4-5 Storage ............................................ 15-16

Operation ............................................. 6-9 Troubleshooting .............................. 16-17

Maintenance Schedule ........................ 10 Repair Parts ..................................... 35-43

Maintenance .................................... 10-13 Parts Ordering ........................ Back Cover

LIMITED'I3NO YEAR WARRANTY ON CRAFTSMAN POWER MOWER

For two years from date of purchase, when this Craftsman Lawn Mower is maintained,

lubricated,and tuned up according to the operating and maintenance instructions in

the owner's manual, Sears will repair free of charge any defect in material or workman-

ship.

If this Craftsman Lawn Mower is used for commemial or rental purposes, this warranty

applies foronly 90 days from the date of purchase.

This Warranty does notcover:

• Expendable items which become worn during normal use, such as rotary mower

blades, blade adapters, belts, air cleaners and spark plug.

•Repairs necessary because of operator abuse or negligence, including bent

crankshafts and the failure to maintain the equipment according to the instructions

contained in the owner's manual.

Warranty service is available by returningthe Craftsman power mower to the nearest

Sears Service Centar/Departmant in the United States. This warranty applies only

while this productis in use in the United States.

This Warranty gives you specific legal rights, and you may also have other rightswhich

varyfrom state tostate.

Sears, Roebuck and Co., D/817 WA, Hoftman Estates, Illinois60179

IMPORTANT= This cutting machine is cepabte of amputating hands and feet and

throwingobjects. Failure to observe the following safety instructionscould result in

serious injuryor death.

I. GENERAL OPERATION

•Read, understand, and follow all

instructionson the machine and in the

manual(s) before starting. Be thor-

oughly familiar with the controls and

the proper use of the machine before

starting.

•Do not put hands or feet near or under

rotatingparts. Keep clear of the

discharge opening at atl times.

• Only allow responsibte individuals,

who are familiar with the instructions,to

operate the machine.

•Clear the area of objects such as

rocks,toys, wire, bones, sticks, etc.,

which could be picked up and thrown

by the blade.

•Be sure the area isclear of other

people before mowing. Stop machine if

anyone enters the area.

•Do not operate the mower when

barefoot or weadng open sandals.

Always wear substantial foot wear.

• Do not pull mower backwards unless

absolutely necessary, Always look

down and behind before and while

moving backwards.

•Do not operate the mower without

proper guards, plates, grass catcher or

other safety protective devices in place.

• See manufacturer's instructionsfor

proper operation and installation of

accessories. Only use accessories

approved by the manufacturer.

•Stop the blade(s) when crossing gravel

drives, walks, or roads.

•Stop the engine (motor) whenever you

leave the equipment, before cleaning

the mower or uncloggingthe chute.

•Shut the engine (motor) off and wait

untilthe blade comes to complete stop

before removing grass catcher.

•Mow only in daylight or good artificial

light.

•Do not operate the machine while

under the influence of alcohol or drugs.

•Never operate machine in wet grass.

Always be sure of your footing: keep a

firm hold on the handle and walk; never

run.

•Disengage the self-propeUed mecha-

nism or drive clutch on mowers so

equipped before starting the engine

(motor).

•If the equipment should start tovibrate

abnormally, stop the engine (motor)

and check immediately for the cause.

Vibration is generally a warning of

trouble.

•Always wear safety goggles or safety

glasses with side shields when

operating mower.

IL SLOPE OPERATION

Slopes are a major factor related to slip

and fail accidents which can result in

severe injury.All slopes require extra

caution. If you feel uneasy on a slope, do

notmow it.

DO:

• Mow across the face of slopes: never

up and down. Exercise extreme caution

when changing direction on slopes.

•Remove obstacles such as rocks, tree

limbs, etc.

•Watch for holes, ruts, or bumps. Tall

grass can hide obstacles.

DO NOT=

•Do not trim near drop-offs, ditches or

embankments. The operator could lose

footing or balance.

•Do nottdm excessively steep slopes.

•Do not mow on wet grass. Reduced

footing could cause slipping.

Ill.CHILDREN

Tragic accidents can occur if the operator

isnot alert to the presence of children.

Childrenare often attracted to the

machine and the mowing activity. Never

assume that children will remain where

you last saw them.

• Keep children out of the trimming area

and under the watchful care of another

responsible adult.

•Be alert and turn machine off if children

enter the area.

• Before and while walking backwards,

look behind and down for small

children.

• Never allow children to operate the

machine.

• Use extra care when approaching blind

corners, shrubs, trees, or other objects

that may obscure vision.

IV. SERVICE

•Use extra care in handling gasoline

and other fuels. They are flammable

and vapors are explosive.

- Use only an approved container.

-Never remove gas cap or add fuel

with the engine running.Allow

engine to cool before refueling. Do

not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel

container inside where there is an

open flame, such as a water heater.

• Never run a machine inside a closed

area.

• Never make adjustments or repairs with

the engine (motor) running. Disconnect

the spark plug wire, and keep the wire

away from the plug to prevent acciden-

tal starting.

• Keep nuts and belts, especially blade

attachment belts, tight and keep

equipment in good condition.

• Never tamper with safety devices.

Check their proper operation regularly.

• Keep machine free of grass, leaves, or

other debris build-up. Clean oil or fuel

spillage. Allow machine to cool before

storing.

• Stop and inspect the equipment if you

strike an object. Repair, if necessary,

before restarting.

• Never attempt to make wheel height

adjustments while the engine (motor) is

running.

•Grass catcher components are subject

to wear, damage, and deterioration,

which could expose moving parts or

allow objects to be thrown. Frequently

check components and replace with

manufacturer's recommended parts,

when necessary.

•Mower blades are sharp and can cut.

Wrap the blade(s) or wear gloves, and

use extra caution when servicing them.

•Do notchange the engine governor

setting or overspeed the engine.

ALook for this symbol to point out

importantsafety precautions. It means

CAUTION!!t BECOMEALERT!t! YOUR

SAFETY ISINVOLVED.

ACAUTION: In orderto prevent

accidental starting when setting up,

transporting, adjusting or making repairs,

always disconnect spark plug wire and

place wire where it cannot contactspark

plug.

&WARNING: Engine exhaust, some of its

constituents, and certain vehicle

components contain or emit chemicals

known to the State of California to cause

cancer and birth defects or other

reproductive harm.

_,WARNING: Battery posts,terminals and

related accessories contain lead and lead

compounds, chemicals known to the State

of California to cause cancer and birth

defects or other reproductive harm. Wash

hands after handling.

_, CAUTION: Muffler and other engine

parts become extremely hotduring

operation and remain hot after engine has

stopped. To avoid severe burns on

contact, stay away fromthese areas.

These accessories were available when this lawn mower was produced. They are not

shipped with your mower. They are also available at most Sears retail outlets and

service centers. Most Sears stores can also order repair partsfor you, when you

provide the model number of your lawn mower. Some of these accessories may not

apply to your lawn mower.

LAWN MOWER PERFORMANCE

CUPPING DEFLECTOR

FOR REAR DISCHARGE LAWN MOWERS MULCHER KITS STABILIZER

GRASS CATCHERS GRASS CATCHERS

FOR FOR

REAR DISCHARGE SIDE DISCHARGE

LAWN MOWERS LAWN MOWERS

GAS CANS

LAWN MOWER MAINTENANCE

MUFFLERS AIR FILTERS SPARK PLUGS

BELTS BLADES BLADE ADAPTERS WHEELS ENGINE OIL

Read these instructions and this manual

in its entirety before you attempt to

assemble or operate your new lawn

mower.

IMPORTANT: This lawn mower is

shippedWITHOUT OIL OR GASOLINE in

the engine.

Your new lawn mower has been as-

sembled at the factory with the exception

of those parts left unassembled for

shipping purposes. All parts such as nuts,

washers, bolts, etc., necessary to com-

plete the assembly have been placed in

the parts bag. To ensure safe and proper

operationof your lawn mower, all parts

and hardware you assemble must be

tightened securely. Use the correct tools

as necessary to ensure proper tightness.

TO REMOVE LAWN MOWER FROM

CARTON

1. Remove loose parts included with

mower.

2. Cut down two end corners of carton

and lay end panel down flat.

3. Remove all packing materials except

padding between upper and lower

handle and padding holding operator

presence control bar to upper handle.

4. Roll lawn mower out of carton and

check carton thorougly for additional

loose pads.

HOW TO SET UP YOUR LAWN

MOWER

TO UNFOLD HANDLE

IMPORTANT: Unfold handle carefully so

as not to pinch or damage control cables.

1. Raise handles until lower handle

section locks intoprace in mowing

position.

2. Remove protective padding, raise

upper handle section into place on

lower handle and tighten both handle

knobs.

3. Remove handle padding holding

operator presence control bar to

upper handle.

Your lawn mower handle can be adjusted

for your mowing comfort. Refer to "AD-

JUST HANDLE" in the Service and

Adjustmentssection of this manual.

Operator

con_'olbar

Liftu

Mowing

position

TO INSTALL A'I'I'ACHM ENTS

Your lawn mower was shipped ready to

be used as a mulcher. To convert mower

to bagging, see "TO CONVERT MOWER"

in the Operation section of this manual.

TO PREPARE BA'I'rERY

NOTE: Your battery must be charged

before you can start your lawn mower.

1. Disconnect engine battery connector

(male) from battery connector (female)

2. Connect battery charger connector

(male) to battery connector (female).

3. Plug battery charger into110 volt A.C.

outlet.

4. Leave battery charger connected for

24 hours before starling your engine

forthe first time.

5. After charging, connect engine

connector (male) to battery connector

(female).

Your engine has an integral alternator for

partial charging. Connect your battery

charger to charge battery as required.

IMPORTANT: The engine alternator will

not charge a discharged battery.

At the end of the mowing season the

battery should be charged for 48 hours to

protect the battery duringwinter storage.

ACAUTION: Always disconnect the

engine connector (male) from the battery

connector (female) to prevent accidental

starting when transperting or storing your

lawn mower after the season.

Charger connector Battery connector

Engine connector (male) Battery charger

Lowerhandle5

KNOWYOURLAWNMOWER

READ THIS OWNER'S MANUALAND SAFETY RULES BEFORE OPERATING YOUR

LAWN MOWER. Compare the illustrationswith your lawn mower to familiarize yourself

with the locationof various controls and adjustments. Save this manual for future

reference.

These symbols may appear on your lawn mower or In literature supplied with the

product, Learn and understand their meaning.

CAUTION ENGINE ENGINE FAST SLOW CHOKE FUEL OIL DANGER, KEEP HANDS

OR WARNING ON OFF AND FEET AWAY

Engine zone

control

Auxlfiary

starter handle

presence control her

start switch

Engine oil cap

with

Gasoline cap

Air filter

Primer

Muffler

Ddve cover

Housin

IMPORTANT: This lawn mower is shipped _Wheel adjuster

WITHOUT OIL OR GASOLINE in the engine (on eachwheel)

MEETS CPSC SAFETY REQUIREMENTS

Sears rotarywalk-behind power lawn mowers conformto the safety standards of the

American National Standards Instituteand the U.S. Consumer Product Safety Commis-

sion. The blade turns when the engine is running.

Operator presence control bar - must

be held down to the handle to start the

engine. Release to stop the engine,

Key start switch- used for starting the

engine,

Auxiliary starter handle -used for

starting the engine.

Primer -pumps additional fuel from the

carburetor to the cylinderfor use when

starting a cold engine.

Drive control lever - used to engage

power-propelled forward motion of lawn

mower,

Theoperationofany lawn

mower can result in foreign

objects thrown into the

eyes, which can result in

severe eye damage.

Always wear safety glasses or eye

shields while operating your lawn mower

or performing any adjustments or repairs.

We recommend a wide vision safety

mask over spectacles or standard safety

glasses.

HOW TO USEYOUR LAWN MOWER

ENGINE SPEED

The engine speed was set at the factory

for optimumperformance. Speed is not

adjustable.

ENGINE ZONE CONTROL

ACAUTION: Federal regulations require

an engine controlto be installed on this

lawn mower in order to minimize the risk

of blade contact injury.Do notunder any

circumstances attempt todefeat the

function of the operator control. The blade

turns when the engine is running.

•Your lawn mower is equipped with an

operator presence control bar which

requires the operator to be positioned

behind the lawn mower handle to start

and operate the lawn mower.

DRIVE CONTROL

•Self-propelling is controlled by holding

the operator presence control bar down

to the handle and pushing the drive

control Teverforward until it clicks;then

releasing the lever.

•Forward motionwill stop when the

operator presence control bar is

released. To stop forward motion

without stopping engine, release the

operator presence control bar slightly

until the drive control disengages. Hold

operator presence control bar down

against handle to continue mowing

without self-propelling.

•To keep drive control engaged when

turningcomers, push down on handle

and liftfront wheels off ground while

turning lawn mower. Drive

control

TO ADJUST CU'I-rlNG HEIGHT

Raise wheels for low cut and lower

wheels for high cut, adjust cuttingheight

to suit your requirements. Medium

positionis best for most lawns.

•TO change cutting height, squeeze

adjuster lever toward wheel. Move

wheel up or down to suit your require-

ments. Be sure all wheels are in the

same setting.

NOTE: Adjuster is properly positioned

when plate tab inserts into hole in lever.

Also. 9-pesition adjusters (if so equipped)

allow lever to be positioned between the

plate tabs.

LowerWheelsfor High Cut Plat_Ta_l,

RaiseWheels forLowCut Lever

TO CONVERT MOWER

Yourlawnmowerwas shippedreadytobe

usedas a mulcher.Toconverttobegging :

REAR BAGGING

• Uft mar door ofthe lawn mower and place

the grass catcherframe hooksonto the

doar pivct p_ns.

•To convert tomulching ope_, remove

grasscatcher and dose reardoor.

ACAUTION: Do not runyour lawn mower

without clipping deflector or approved

grass catcher in place, Never attempt to

operate the lawn mower with the rear

door removed or propped open.

Pivot " Rear Grass

catcher

handle

Catcher frame hook

To engage Ddve control

drive control disengaged 7

TO EMPTY GRASS CATCHER

1. Open door and lift up on grass catcher

using the frame handle.

2. Remove grass catcher with clippings

from under tawn mower handle.

3. Empty clippingsfrom bag using both

frame handle and bag handle.

NOTE: Do not drag the bag when

emptying; itwill cause unnecessary wear.

Grass

catcher

handle

Bag

handle

BEFORE STARTING ENGINE

ADD OIL

Your lawnmower is shipped without oil in

the engine. Engine holds 20 oz. of oil.

For type and grade ofoil to use, see

"ENGINE" in Maintenance section of this

manual.

1. Be sure lawnmower is level and area

around oil fill is clean.

2. Remove engine oft cap and fill to the

full line on the dipstick. Pour oil slowly.

Do not over fill.

NOTE: Allow oil to settle down intoengine

foraccurate reading. To read proper level,

tighten engine oil cap, then remove it to

read the dipstick.

3. Reinstall engine oil cap and tighten.

• Check oil level before each use. Add

oil if needed. Fillto full lineon dipstick.

•Change the oil after every 25 hours of

operation or each season. You may

need to change the oil more often

under dusty, dirty conditions.

ADD GASOLINE

•Fillfuel tank. Use fresh, clean, regular

unleaded gasoline with a minimum of

87 octane. Do not mix oil with gaso-

line. Purchase fuel in quantities that

can be used within 30 days to assure

fuel freshness.

AWARNING: Experience indicatesthat

alcohol blended fuels (called gasohol or

using ethanol or methanol) can attract

moisture which leads to separation and

formationof acids during storage. Acidic

gas can damage the fuel system of an

engine while in storage. To avoid engine

problems, the fuel system should be

emptied before storage of 30 days or

longer. Drain the gas tank, start the

engine and let it run untilthe fuel lines

and carburetor are empty. Use fresh fuel

next season. See Storage Instructionsfor

additional information. Never use engine

or carburetor cleaner products in the fuel

tank or permanent damage may occur.

A CAUTION: Filltobottom ofgas tank

filler neck. Do not ovedill. Wipe off any

spilled oil or fuel. Do not store, spill or

use gasoline near an open flame.

filler cap

Engine

oil cap

TO START ENGINE

NOTE: Due to protective coatings onthe

engine, a small amount ofsmoke may be

present during the initial use of the

product and should be considered

normal.

I. TO start a cold engine, push primer

three (3) times before tryingto stad.

Use afirm push, This step is not

usually necessary when starting an

engine which has already run for a

few minutes.

2. Hold operator presence control bar

down to the handle.

3. Turn electric start key clockwiseto

crank engine.

IMPORTANT:Do notcrank engine more

than five continous seconds between

each time you try to start. Wait 5 to 10

seconds between each attempt.

1. To start engine using the auxiliary

starter handle, follow the steps above.

Exchange the use of the start key for

starter handle. Pull starter handle

quickly. Do not allow starter rope to

snap back.

TO STOP ENGINE

To stop engine, release operator

presence control bar.

NOTE: In cooler weather it may be

necessary to repeat priming steps. In

warmer weather over priming may cause

flooding and engine will notstart. If you

do flood engine wait a few minutes before

attemptingto start and do not repeat

priming steps.

MOWING TIPS

•Under certain conditions, such as very

tall grass, it may be necessary to raise

the height of cut to reduce pushing

effort and to keep from overloading the

engine and leaving clumps of grass

clippings. It may also be necessary to

reduce ground speed and/or run the

lawn mower over the area a second

time.

•For extremely heavy cuffing, reduce the

width of cut by overlapping previously

cut path and mow slowly.

•For better grass bagging and most

cuttingconditions, the engine speed

should be set in the fast position.

•When using a rear discharge lawn

mower in moist, heavy grass, clumps of

cut gross may notenter the grass

catcher. Reduce ground speed

(pushing speed) and/or run the lawn

mower over the area a second time.

•If a trailof clippingsis left on the right

side of a rear discharge mower, mow in

a clockwise directionwith asmall

overlap to collect the clippings on the

next pass.

•Pores in cloth grass catchers can

become filled with dirt and dust with

use and catchers will collect less grass.

To prevent this, regularly hose catcher

off with water and let dry before using.

•Keep top of engine around starter clear

and clean of grass clippings and chaff.

This will help engine air flow and

extend engine life.

MULCHING MOWING TIPS

IMPORTANT: Forbestperformance,

keep mower housing free of built-up

grass and trash. See "CLEANING" in the

Maintenance section of this manual.

•The special mulching blade will recut

the grass clippings many times and

reduce them in size so that as they fall

onto the lawn they will disperse into the

grass and notbe noticed. Also,the

mulched grass will biodegrade quickly

to provide nutdents for the lawn.

Always mulch with your highest engine

(blade) speed as this will provide the

best recutting action of the blades.

• Avoid cutting your lawn when it is wet.

Wet grass tends to form clumps and

interferes with the mulching action.

The best time to mow your lawn is the

early afternoon. At this time the grass

has dried and the newly cut area will

not be exposed to the direct sun.

• For best results, adjust the lawn mower

cutting height so that the lawn mower

cuts off only the top one-third of the

grass blades. If the lawn is overgrown

it will be necessary to raise the height

of cut to reduce pushing effort and to

keep from overloading the engine and

leaving clumps of mulched grass. For

extremely heavy mulching, reduce your

width of cut by overlapping previously

cut path and mow slowly.

• Certain types of grass and grass

conditions may require that an area be

mulched a second time to completely

hide the clippings. When doing a

second cut, mow across or perpendicu-

larto the first cut path.

•Change your cuttingpattern from week

to week. Mow north to south one week

then change to east towest the next

week. This will help prevent matting

and graining of the lawn.

Max 1/3

.A,NTENANCEBC.EDU'E

Check forLoose Fasteners _I_

Clean/Inspect Grass Catcher

(if Equipped) I_ I/

MClean Lawn Mower I_ I/Clean Under Drive Cover

WIPower-PrOpelled Mowers) t_SCheck drive bel ulleys

(Powe r-Propell_lPMowers) V

R check/Sharp•n/ReplaceBlade r_'_

LubriCationChart ¥/ i/

Clean BatteP//ReChar_

Electric Start Mowers li/ 1/4

ECheck Engine Oil Level t/

N Change Engine Oil t/l_t

Clean Air Filter I_ 2

Inspect Muffler

Clean or Replace Spark Plug f_

E Replace Air Filtar Paper Cadridge ItS=

t - Change monaoftenwhen opgralklgunde_• heavy loador inhigh ambkml I_111_alum$.

2-Sarvk:emorl o_len_operetlng Indirty or dusty conditions.

3 - Re_,uce bladesmo,e often whim mowing insandy =o_,

4- Cha_e 48 hour_ atend of =e_

GENERAL RECOMMENDATIONS

The warranty on this lawn mower does

notcover items that have been subjected

to operator abuse or negligence. To

receive full value from the warranty,

operator must maintain mower as

instructedin this manual.

Some adjustments will need to be made

periodicallyto properly maintain your

unit.

All adjustments in the Service and

Adjustments section ofthis manual

should be checked at least once each

season.

•Once a year, replace the spark plug,

clean or replace air filter element and

check blade for wear. A new spark

plug and clean/new air filter element

assures proper air-fuel mixture and

helps your engine run better and last

longer.

•Follow the maintenance schedule in

this manual.

LUBRICATION CHART

(_) Wheeladjuster

eachwheel)

(_) Brake

spring

bracket

Rear

(_) Handle bracket mounting pins door hinge

(_) Spray lubricant

(_) See "ENGINE" In Maintenance section.

BEFORE EACH USE

1. Check engine oil level.

2. Check for loose fasteners.

LUBRICATION

Keep unit well lubricated (See "LUBRI-

CATION CHART'). 10

IMPORTANT: Do notoil or grease

plastic wheel bearings. Viscous

tubricantswillattract dust and did that

will shorten the life of the self-lubricat-

ing bearings. Ifyou feel they must be

lubricated, use onlyadry, powdered

graphite type lubricantsparingly.

Inhaltsverzeichnis

Sprachen:

Andere Craftsman Rasenmäher Handbücher

Craftsman

Craftsman 917.273641 Bedienungsanleitung

Craftsman

Craftsman 28991 Bedienungsanleitung

Craftsman

Craftsman 917.25081 Bedienungsanleitung

Craftsman

Craftsman 917.255890 Bedienungsanleitung

Craftsman

Craftsman 917.388450 Bedienungsanleitung

Craftsman

Craftsman 38973 Bedienungsanleitung

Craftsman

Craftsman 917.378440 Bedienungsanleitung

Craftsman

Craftsman 917.371601 Bedienungsanleitung

Craftsman

Craftsman 917.275033 Bedienungsanleitung

Craftsman

Craftsman 917.376460 Bedienungsanleitung

Craftsman

Craftsman 917.374552 Bedienungsanleitung

Craftsman

Craftsman 917.388512 Bedienungsanleitung

Craftsman

Craftsman 917.385140 Bedienungsanleitung

Craftsman

Craftsman 917.374543 Bedienungsanleitung

Craftsman

Craftsman 25415 Bedienungsanleitung

Craftsman

Craftsman 917.286380 Bedienungsanleitung

Craftsman

Craftsman 917.377524 Bedienungsanleitung

Craftsman

Craftsman 28913 - LTS 1500 17.5 HP/42" Lawn Tractor Bedienungsanleitung

Craftsman

Craftsman 247.37125 Bedienungsanleitung

Craftsman

Craftsman 917.376461 Bedienungsanleitung

Craftsman

Craftsman 917.272464 Bedienungsanleitung

Craftsman

Craftsman 917.375351 Bedienungsanleitung

Craftsman

Craftsman 917.383223 Bedienungsanleitung

Craftsman

Craftsman 944.364740 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung