Craftsman 917.379420 Bedienungsanleitung

Owner's Manual

CRnFTSMnN"

6.5 HORSEPOWER

22" SIDE DISCHARGE

POWER PROPELLED

ROTARY LAWN MOWER

Model No.

917.379420

• Safety

•Assembly

• Operation

•Maintenance

•Espahol

•Repair Parts

CAUTION:

Read and follow all

Safety Rules and Instructions

before operatingthisequipment

Sears, Roebuck and Co., Hoffman Estates, IL 60179

Visit our Cmfl.sman website: www.ssars.com/cmftsman

Warranty 2 Product Specifications 1(

Safety Rules 2 Service and Adjustments 1,"

Assembly 4 Storage 1_

Operation 5 Troubleshooting 1(

Maintenance Schedule 9 Repair Parts 3,=

Maintenance 9 Parts Ordering Back Cove

LIMITED TWO YEAR WARRANTY ON CRAFTSMAN POWER MOWER

For two years from date of purchase, when this Craftsman Lawn Mower is maintained,

lubricated, and tuned up according to the operating and maintenance instructionsin

the owner's manual, Sears will repair free of charge any defect in material or workman-

ship.

If this Craftsman Lawn Mower is used for commercial or rental purposes, this warranty

applies for only 90 days trom the date of pumhase.

This Warranty does not cover.

•Expendable items which become worn during normal use, such as rotary mower

blades, blade adapters, belts, air cleaners and spark plug.

•Repairs necessary because of operator abuse or negligence, including bent

crankshafts and the failure to maintain the equipment according to the instructions

contained in the owner's manual.

Warranty service is available by returning the Craftsman power mower to the nearest

Sears Service Center/Department in the United States. This warranty applies only

while this product is in use in the United States.

This Warranty gives you specific legal rights, and you may also have other rightswhich

vary from state to state.

SEARS, ROEBUCKAND CO., D/817 WA, HOFFMAN ESTATES, ILLINOIS 60179

Safety standards require operator

presence controls to minimize the dsk of

injury.Your unit is equipped with such

controls. Do not attempt to defeat the

function of the operator presence controls

under any circumstances.

TRAINING:

•Read this operator's manual carefully.

Become familiar with the controls and

know how to operate your mower

properly. Learn howto quicklystop

mower.

• Do not allow children to use your mower.

Never allow adults to use mower without

proper instructions.

•Keep the area of operation clear of all

persons, especially small children and

pets.

•Use mower only as the manufacturer

intended and as described in this

manual.

•Do not operate mower if it has been

dropped or damaged in any manner.

Always have damage repaired before

using your mower.

•Do not use accessory attachmentsthat

are not recommended by the manufac-

turer. Use of such attachments may be

hazardous.

•The blade turns when the engine is

running.

PREPARATION:

• Always thoroughlycheck the area to be

mowed and clear it of all stones, sticks,

wires, bones, and other foreign objects.

These objects will he thrown by the

blade and can cause severe injury.

•Always wear safety glasses or eye

shields when starting and while using

your mower.

• Dress properly, Do not operate mower

when barefoot or wearing open sandals.

Wear only solidshoes with good traction

when mowing.

•Check fuel tank before starting engine.

Do not fillgas tank indoors,when the

engine is runningor when the engine is

hot.Allow the engine to cool for several

minutes before fillingthe gas tank. Clean

off any spilled gasoline before starting

the engine.

•Always make wheel height adjustments

before startingyour mower. Never

attempt to do this whitethe engine is

running.

•Mow only in daylightor good artificial

light.

OPERATION:

•Keep your eyes and mind on your

mower and the area being cut. Do not let

other interestsdistractyou.

•Do not mow wet or slippery grass. Never

run white operating your mower. Always

be sure of yourfooting_keep a firm

holdon the handles and walk.

•Do not put hands or feet near or under

rotatingpads. Keep clear of the dis-

charge opening at alltimes.

•Always stop the engine whenever you

leave or are net using your mower, or

before crossing driveways, walks, roads,

and any grevel.-cevered areas.

•Never directdischarge of matedal

toward bystanders nor allow anyone

near the mower while you are operating

it.

•Before cleaning, inspecting, or repairing

your mower, stop the engine and make

absolutely sure the blade and all moving

parts have stopped. Then disconnect the

spark plug wire and keep it away from

the spark plug to prevent accidental

starting.

•Do not continueto run your mower if you

hita foreign object. Follow the procedure

outlined above, then repair any damage

before restarting and operating you

mower.

•Do not change the govemor settings or

overspeed the engine. Engine damage

or personal injurymay result.

•Do not operate your mower if it vibrates

abnormally. Excessive vibrationis an

indicationof damage; stopthe engine,

safelycheck for the cause of vibration

and repair as required.

•Do net runthe _indoors.Exhaust

fumes are dangerous.

* Never cut grass by pullingthe mower

towards you. Mow across the face of

slopes, never up and down or you

• mightlose your footing. Do not mow

excessively steep slopes. Use caution

when operating the mower on uneven

terrain or when changing directionsm

maintain good footing.

•Never operate your mower without

proper guards, plates, grass catcher or

other safety devices in place.

MAINTENANCE AND STORAGE:

•Check the blade and the engine

mounting bolts often to be sure they are

tightened properly.

•Check all belts, nutsend screws at

frequent intervalsfor proper tightness to

be sure mower is in safe working

condition.

• Keep all safety davices in place and

working.

•To reduce fire hazard, keep the engine

free of grass, leaves or excessive

grease and oil.

•Check grass catcher often fordateriora-

tion and wear and replace wom bags.

Use only replacement begs that are

recommended by and comply with

specificationsof the manufacturer of

your mower.

•Always keep a sharp blade on your

mower.

•Allow engine to cool before storing in

any enclosure.

•Never store mower with fuel in the tank

inside a building where fumes may

reach an open flame or an ignition

source such as a hot water heater,

space heater, clothes dryer, etc.

ALook for this symbol to point out

important safety precautions. It means

CAUTION!I! BECOMEALERT!t! YOUR

SAFETY IS INVOLVED.

ACAUTION: Always disconnect spark

plug wire and place wire where it cannot

contact spark plug in order to prevent

accidental starting when setting up,

transporting, adjusting or making repairs.

AWARNING

The engine exhaust from this product

contains chemicals known to the State of

California to cause cancer, birth defects,

or other reproductive harm.

7_ acQ_;sodss _m avaJa_ wi_Bn_s lawn mower wes produ_d. They am not

shlpped with your mower. They are also availableat mo6tSasrsretailoutists end sewice

centers. MostSearsstorescanalso orderrepairpartsfor you,when youprovidethe model

numberofyourlawnmower. Someof_'tese eccsssofiesmay notapplytoyourlawnmower.

LAWN MOWER PERFORMANCE

CLIPPING DEFLECTOR

FOR REAR OISCHARGE LAWNMOWERS MULCHER KITS

GRASS CATCHERS

FOR

FEAR OISCHARGF-

LAWN MOWERS

_/! GRASS CATCHERS

FOR

SiDE DISCHARGE

LAWN MOWERS

MUFFLERS

LAWN MOWER MAINTENANCE

AIR,FILTERS

BFJ.TS BLADES BLADE ADAPTERS WHEELS

S'rABILIZER

GAS CANS

SPARK PLUGS

s_mm,=on.

Read these instructions and this manual in

itsentirety before you attempt to assemble

or operate your new lawn mower.

IMPORTANT: This lawn mower is shipped

WITHOUT OIL OR GASOLINE inthe

engine.

Your new lawn mower has been as.

sembled at the factory withthe exception of

those parts left unassembled for shipping

purposes. To ensure safe and proper

operation of your lawn mower, all parts and

hardware you assemble must be tightened

securely. Use the correct toolsas neces-

sary to ensure proper tightness. All parts

such as nuts, washers, belts, etc., neces-

sary to complete the assembly have been

placed in the pads bag.

TO REMOVE LAWN MOWER FROM

CARTON

• Remove loose parts included with

mower.

•Cut down two end comers of carton

and lay end panel down flat.

•Remove all packing materials except

padding between upper and lower

handle and padding holding operator

presence control bar to upper handle.

•Roll lawn mower out of carton and

check cartcn thoroughly for additional

loose parts.

HOW TO SET UP YOUR LAWN

MOWER

TO UNFOLD HANDLE

IMPORTANT: Unfold handle carefully so

as not to pinch or damage control cables.

•Raise handles until lower handle

section locks into place in mowing

position.

•Remove protective padding, raise

upper handle section into place on

lower handle and tighten both handle

knobs.

•Remove handle padding holding

operator presence control bar to upper

handle.

•Your lawn mower handle can be

adjusted for your mowing comfort.

Refer to "Adjust Handle" in the Service

and Adjustment section of this manual.

Operatorpresencecontrol

bar

Upper handle

Uft up

Lower

r_ndle

KNOWYOUR LAWNMOWER

READTHIS OWNER'S MANUAL.aND SAFETY RULES BEFORE OPERATING YOUR LAWN

MOWER. Compare the illustrationswflhyourlawnmower tofamil arize yourselfwiththe

Iocat_n o_variouscontrolsand adj--. Save this manualforfuturersference.

These symbols may appear on your lawn mower or in literature supplied with the

product. Leam and understand their meaning.

CAUTIO_ EICQINE ENGINE FA,_T SLOW _FUEL OIL DANQER, KEEPHAND8

ORWARNING ON OFF ANO FEETAWAY

Operator presence control lever

Engine zone control cabF

Starter handle

Handle knob

Engine oil cap with dipstick

Mulcher door

Gasoline Biercap

_lrner

Drive cover

IMPORTANT: This lawn mower is

shipped WITHOUT OIL OR GASOLINE

in the engine.

MEETS CPSC SAFETY REQUIREMENTS

Searsrotarywalk-behind power lawn mowers conform to the safety standards of the

American National Standards Institute and the U.S. Consumer Product Safety Commis-

sion. The blade turns when the engine is running.

Operator pmsance control bar -must be

helddswn to the hande tostartthe engine.

Release to stop the engine.

Pdmer. pte,nl__fusl from b'_e

ca.,burstortothe cytindsrfor usewhen

staringaco dan ne.

Startar hendle - usedforstad_ngthe angine.

I)rlve control lever - used to engage power-

propelledfonNardmotionof lawn mower.

Mulcher - allowsconvemionto dLschargeor

bag ngoperstbn.

_he operationofany lawn mower

can resull_ lorsign,dojsctsthrown

_o the eyes, whichcan resultin

_were eye damege. Alweys wear safsty

glasses or eye shieldswhi_ operatingyour

lawnmoweror performingany adjustments

or repairs. We recommenda wide vision

s_sty mask overspectacl_ or standard

s etyg sses.

_TO USEYOUR LAWN MOWER

ENGINE SPEED CONTROL

The engine speed was set at the factory

for optimum performance. Speed is not

adjustable.

ENGINE ZONE CONTROL

ACAUTION: Federal regulations require

an engine control to be installed on this

lawn mower in order to minimize the risk

of blade contact injury. Do not under any

circumstances attempt to defeat the

function of the operator control. The blade

turns when the engine is running.

• Your lawn rnoweris equippedwith an

operatorpresence controlbar which

requiresthe operatorto be posit)ned

behind_lawn mower handleto startand

operatethelawnmower.

DRNE CONTROL

•Serf-propellingis controlledby holdingthe

operatorpresence controlbar down to the

handle and pushing_le drive controllever

forwarduntilitdicks; then releasethe lever.

•Forwardmotionwillstopwhen the operator

presencecontrolbar isreleased. To stop

forward motionwithoutstoppingengine,

releasethe operatorpresence controlbar

slicjd_ untilthe driveoontroldisengages.

Hold operatorpresence controlbar down

to handleto continuemowingwithouteelf-

propelling.

•To keep drive controlengaged when

turningcorners,push down on handla and

liftfrontwheels off groundwhile turning

lawn mower.

Operator presence control Drive

bar _control

To engage ddve control Drive control

disengaged

TO ADJUST CUTTING HEIGHT

•Raise wheetsfor lowcut and lowerwheels

forhighcut.

•Adjustcuttingheightto suityour require-

ments. Medium_isbestformost

lawns.

•TochangecutUngheight,squeeze

adjusterlevertowardwheel. Move wheel

up or downto suityourrequirements.Be

sureall wheelsare inthe same setling.

NOTE: Adjuster is properly positioned

when plate tab inserts into hole in lever.

Also, 9-position adjusters (if so equipped)

allow lever to be positioned between the

plate tabs.

Lower wheels for Plate tab

high cut Lever

Raise wheels for low

cut

NOTE: Your lawn mower has been

shipped ready for mulching operation. To

convert to discharging operation, you

must install the discharge deflector

attachment included with your mower.

TO INSTALL DISCHARGING

DEFLECTOR

•Lift door upward on it's hinge until the

deflector frame can be hooked over the

door mounting bracket as shown.

•Release the door to rest against

deflector frame.

•To return to mulching operation,

reverse the above steps and be sure

door is in closed position.

Deflector Door

Bracket

ACAUTION: Do not operate your lawn

mower without mulcher door in closed

position, discharge deflector in place, or

approved grass catcher in place.

BEFORE STARTING ENGINE

OIL

Yourlawn mower is shippedwithout oilinthe

engine.

• Be sum moweris leveland area aroundoil

tiffisdeen.

• Remove engineoilcap and filltothe fuN

lineonthe dipstk:k.

NOTE: Allow oil to settle down into

engine for accurate dipstick reading.

•Engine holds 20 ozs.of oil. Fortypeand

grade ofoiltouse, see "ENGINE"

Maintenancesectionof thismanual.

• Pouroilslowly. Do notoverliU.

• Check oil levelbeforeesch use. Addoilif

needed. F# to_u4t_e on dipstk:k.

•To mad properlevel,tightenengineoil cap

each time.

* Reinstallengineoil cap and tighten.

• Change the oilalter every 25 hoursof

operat_ or sech seeson. You may nesd

tochange the _more oftenunderdusty,

Arty

ADD GASOLINE

•Fill fuel tank. Use fresh, clean, regular

unleaded gasoline with a minimum of

87 octane. (Use of leaded gasoline

will increase carbon and lead oxide

deposits and reduce valve life). Do not

mix oil with gasoline. Purchase fuel in

quantities that can be used within 30

days to assure fuel freshness.

aAiW.ARNING: Expe,dence in.dicatest.hat

conol blended fuem (calleo gasonoJor

using ethanol or methanol) can attract

moisture which leads to separation and

formation of acids during storage. Acidic

gas can damage the fuel system of an

engine while in storage. To avoid engine

problems, the fuel system should be

emptied before storage of 30 days or

longer. Drain the gas tank, start the

engine and let it run until the fuel lines

and carburetor are empty. Use fresh fuel

next season. See Storage Instructionsfor

additional information. Never use engine

or carburetor cleaner products in the fuel

tank or permanent damage may occur.

f.A..CAUTION: Fillto bottom of gastank

iller neck. Do not overfill. Wipe on any

spilled oil or fuel. Do not store, spill or use

gasoline near an open flame.

TO START ENGINE

• To start a cold engine, push primer five

(5) times before Wing to start. Use a

firm push. This step is not usually 7

necessary when starting an engine

which has already runfor a few

minutes.

•Hold operator presence control bar

down to the handle and pull starter

handle quickly. Do not allow starter

rope to snap back.

•To stop engine, release operator

presence control bar.

NOTE: In cooler weather it may be

necessary to repeat pdming steps. In

warmer weather over pdming may cause

flooding and engine will not start. If you

do flood engine, wait a few minutes

before attempting to start and do not

repeat pdming steps.

Engine oil, Gasoline filler

cap

MOWING TIPS

•Under certain conditions, such as very

tall grass, it may be necessary to raise

the height of cut to reduce pushing

effort and to keep from ovedoading the

engine and leaving clumps of grass

clippings. It may also be necessary to

reduce ground speed and/or run the

lawn mower over the area a second

time.

•For extremely heavy cutting, reduce the

width of cut by ovedapping previously

cut path and mow slowly.

•For better grass bagging and most

cutting conditions, the engine speed

should be set in the fast position.

•For side discharge lawn mowers,

cutting in a counter-clockwise direction,

starting at the outside of the area to be

cut, spreads grass clippings more

evenly and puts less load on the

engine. To keep clippings olt of

walkways, flower beds, etc., make the

first cuts in a clockwise direction.

•Pores in cloth grass catchers can

become filled with dirt and dust with

use and catchers will collect less grass.

To prevent this, regularly hose catcher

off with water and let dry before using.

•Keep top of engine around starter clear

and clean of grass clippings and chaff.

This will help engine air flow and

extend engine life.

MULCHING MOWING1 IPS

IMPORTANT: For best performance, keep

mower housing free of built-up grass and

trash. See "Cleaning" in MAINTENANCE

section of this manual.

• The specialmulchingblade willrecutthe

grass clippings many timesand

them insize sothatas theyfallontothe

lawn theywill disperseintothe grassand

notbe noticed. Also,the mulchedgrass

willbiodegrade quicldyto providenutrients

forthe lawn. Alwaysmulchwithyour

highestengine(blade) speed as this will

providethe best recuttingactionofthe

blades.

•Avoidcuttingyourlawn when itiswet. Wet

grasstendstoformClLm_psand interferes

v_h the _k_g action. The besttkneto

mowyour lawn isthe earlyafternoon. At

thistimethe grasshasdded and the newty

cutarea wiUnotbe exposedtolhe direct

sun.

• For best results,adjustg_elawn_

cut6ngheightsolhst tbe lawn rnowercuts

offonlythe topone-thirdof_e grass

blades, ffthe lawflisovorgrownitwil be

necessan/to rabe the heightofcutto

reducepushingeffortand to keepfrom

overloacr_gthe engine and leaving

clumpsof mulchedgrass.Forextremely

heavymulching,reduceyourwidthofcut

byove pingpreviouslycutpathand

mow slowly.

• Certaintypesofgrassand gr_ _

may requirethat an area be mulcheda

secor_t_netocompk_yt,_dethe

dippings. When doinga secondcutmow

acrossor perpandlculartothe firstcutp_.

•Change yourcuttingpatternfrom week to

week. Mow northto southoneweek then

charge toeastto westthe nextweek. This

willhelpprevent mattingand grainingof

the lawn.

.A, NANCESCHEOULE

AsYOUCOMPLrrE 1__O_'_.O_'__,_ _ _@__ ;_O_

.v,o

Checkto_Loo_ Fastenem _I_

_an/IrmoectGrassCatcher

(IfE_Jipped) ,liS _

Mi CleanLawnMower

CheckdriveI_./pulleys

E (Power-Propetk_Mowers1

CheckiShaq_Replace Blade _a

Lulxicatton Chad ipe

Cteanaattmy

IE'ectrlcSta_MiI_ I/ 11/4

Check En_ne Oil Level I_ I

ChangeEngineOil I/1.2

Clean Air Rlter iif =

ReplaceAirFitterPaperCartridge _=

1•Ch_ge m0_eollenWhmloperldlr_utld_I heavyIolKIorinhill imbl#_ tm/tpemtun_

2 •SenSe mo_ oll_nwhenopm_ll Ind_lyo_d_y _W_ns.

3-Repinebl_es r_r_ _en _ mow_ Inrandy_.

4•Charge48hoursstendofm.

GENERAL RECOMMENDATIONS

The warrantyonthislawnmowerdoasnot

coveritems_at havebeensul:dectedto

operatorebuseorneg,ge_., TO receivetul

valuefromthewanw_, operatormust

maintain mower as instructed in this manual.

Someadj_ willneedtobe made

_toprope_m_m_ you_ur_

Alladjustmentsinthe,_'vice andAdjust-

rnentSsectionofthismenuelshouldbe

ched(ed at least once eech season.

• Onceawar,rap_=_ ap_rkp_ cV_

or repla_ air filter alenlent and died(

blede for wear. A new spe_ plug and

dean/new air filter element assuras proper

air-fuelmixtureandhelpsyourerminerun

•betterand_st_ger.

•Follow the rnaintenance schedule in this

manual

BEFORE EACH USE

• Checkengineoilleval.

• Cl'mck for loose fastanem,

LUBRICATION

Keep unitwell lubd_ated (See "LUBRICATION

CHART').

LUBRICATION CHART

_)Wheel

adjuster

_)Mulcher

door

_Englne

oil

bracket

mountlng pin

_)Brake

spdng

bracket

_SprayUxk_nte

@Refer to MNNTINANCE "ENGINE'

SECTION.

IMPORTANT: Do not oil or grease plastic

wheel beadngs. Viscous lubdoants will

attract dust and dirt that willshorten the

life of the self lubricating beadngs. If you

|eelthey must be lubricated, use only a

dry, powdered graphite type lubricant

spadngly.

PRODUCT SPECIFICATIONS

MODEL NUMBER 917.379420

SERIALNUMBER

DATE OF PURCHASE

GASOLINE CAPACITY/TYPE: 1.25 QUARTS

UNLEADED REGULAR

OIL TYPE (API-SF/SG/SH): SAE 30 (ABOVE 32°F)

SAE 5W-30 (_BELOW32°F)

OIL CAPACITY: 20 OZS,

SPARK PLUG (GAP: .030") CHAMPION RJ19LM OR J19LM

VALVE CLEARANCE: INTAKE: .004 -.008

EXHAUST: .004 -.008

_OLID STATE IGNITION

AIR GAP: .0125 IN.

BLADE BOLT TORQUE: 35-40 FT. LBS.

, The model and serial numbers will be found on a decal attached to the roar ot the

lawn mower housing.Record both sedai number and date of pumhase in space

provided above.

LAWNMOWF-R

Always observe safety rules when performing

any mainter_nce.

TIRES

• Keepliras froe of gasolne, oiI, or inssct

controlchemicalswhich can harm rubber.

•Avoidsturr_,stones,deapruts,sham

objscts and cthar hazards that may cause

tire damage.

BLADE CARE

For best results, mower blade must be

kept sharp. Replace bent or damaged

blades.

TO REMOVE BLADE

•Disconnect spark plug wire from spark

plug and place wire where it cannot

come in contact with spark plug.

•Turn lawn mower on its side. Make

sure air filter and carburetor are up.

•Use a wood block between blade and

mower housing to prevent blade from

tuming when removing blade bolt.

•Protect your hands with gloves and/or

wrap blade with heavy cloth.

•Remove blade bolt by tuming counter-

clockwise.

•Remove blade and attaching hardware

(bolt, lock washer and hardened

washer).

NOTE: Remove the blade adapter and

check the key inside hub of blade adapter

The key must be in good condition to wort

propedy. Replace adapter if damaged,

TO REPLACE BLADE

•Position the blade adapter on the

engine crankshaft. Be sure key in

adapter and crankshaft keyway are

aligned.

•Position blade on the blade adapter

aligning the two (2) holes in the blade

with the raised lugs on the adapter.

•Be sure the trailing edge of blade

(opposite sharp edge) is up toward the

engine.

•Install the blade bolt with the lock

washer and hardened washer into

blade adapter and crankshaft.

•Use block of wood between blade and

lawn mower housing and tighten the

blade bolt, tuming clockwise.

•The recommended tightening torque is

35-40 ft. Ibs.

IMPORTANT: Blade bolt is grade 8 heat

treated.

Inhaltsverzeichnis

Andere Craftsman Rasenmäher Handbücher

Craftsman

Craftsman LAWN TRACTOR 917.27267 Bedienungsanleitung

Craftsman

Craftsman 917.376741 Bedienungsanleitung

Craftsman

Craftsman 917.377795 Bedienungsanleitung

Craftsman

Craftsman 917.382770 Bedienungsanleitung

Craftsman

Craftsman 917.28812 Bedienungsanleitung

Craftsman

Craftsman 917.377240 Bedienungsanleitung

Craftsman

Craftsman 247.38903 Bedienungsanleitung

Craftsman

Craftsman 917.28857 Bedienungsanleitung

Craftsman

Craftsman 917.376572 Bedienungsanleitung

Craftsman

Craftsman 25411 Bedienungsanleitung

Craftsman

Craftsman 917.272431 Bedienungsanleitung

Craftsman

Craftsman EZ3 917.387261 Bedienungsanleitung

Craftsman

Craftsman 28934 Bedienungsanleitung

Craftsman

Craftsman 917.28836 Bedienungsanleitung

Craftsman

Craftsman 917.388421 Bedienungsanleitung

Craftsman

Craftsman 247.28984 Bedienungsanleitung

Craftsman

Craftsman 259O9 Bedienungsanleitung

Craftsman

Craftsman 944.364152 Bedienungsanleitung

Craftsman

Craftsman 917.370561 Bedienungsanleitung

Craftsman

Craftsman 27743 Bedienungsanleitung

Craftsman

Craftsman 944.101761 Bedienungsanleitung

Craftsman

Craftsman EZ3 917.376340 Bedienungsanleitung

Craftsman

Craftsman 25554 Bedienungsanleitung

Craftsman

Craftsman 917.28922 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung