Craftsman 917.379591 Bedienungsanleitung

Owner's Manual

£RAFTSMANo

6.75 HORSEPOWER

22" REAR DISCHARGE

POWER PROPELLED

ROTARY LAWN MOWER

Model No.

917.379591

•+Safety

•Assembly

•Operation

•Maintenance

•EspaSol

•Repair Parts

CAUTION:

Read and follow all

Safety Rules and Instructions

before operating this equipment

Sears, Roebuck and Co., Hoffman Estates, IL 60179

Visit our Craftsman website: www.sears.corrdcraftsman

Warranty

Safet Rules .........

...... t .......... • ............... 2

.... 10

Product Specifications .......................... 11

Service and Adjustments ...................... 14

Storage ................................................. 16

Troubleshooting ................................... 17

Repair Parts .......................................... 37

Parts Ordering ...................... Back Cover

POWER MOWER

of purchase, when this Craftsman Lawn Mower is maintained,

, according to the operating and maintenance instructions in

_rs will repair free of charge any defect in material or workman-

thj_ M_wer;is used for commercial or rental purposes, this warranty

._pptJ_es for (_nly 90. days from the date of purchase.

_TJ}i_ Warra_y does not cover:,

,,: ExpenclaUle it_rns_which bec_me worn during normal use, such as rotary mower

blades blade adapters, belt_ air cleaners and spark plug,

• Repairs nee"essary because of operator abuse or negligence, including bent

crankshafts and the failure to maintain the equipment according to the instructions

contained in the owner's manual.

Warranty service is available by returning the Craftsman power mower to the nearest

Sears Service Center/Department in the United States. This warranty applies only

while this product is in use in the United States.

This Warranty gives you specific legal rights, and you may also have other rights which

vary from state to state.

SEARS, ROEBUCKAND CO., D/817 WA, HOFFMAN ESTATES, ILLINOIS 60179

Safety standards require operator

presence controls to minimize the

risk of injury. Your unit is equipped

with such controls. Do not attempt to

defeat the function of the operator

presence controls under any

circumstances.

TRAINING:

• Read this operator's manual carefully.

Become familiar with the controls and

know how to operate your mower

properly. Learn how to quickly stop

mower.

• Do not allow children to use your mower.

Never allow adults to use mower without

proper instructions.

• Keep the area of operation clear of all

persons, especially small children and

pets.

• Use mower only as the manufacturer

intended and as described in this

manual.

•Do not operate mower if it has been

dropped or damaged in any manner.

Always have damage repaired before

using your mower.

• Do not use accessory attachments that

are not recommended by the manufac-

turer. Use of such attachments may be

hazardous.

• The blade turns when the engine is

running.

PREPARATION:

• Always thoroughly check the area to be

mowed and clear it of all stones, sticks,

wires, bones, and other foreign objects.

These objects will be thrown by the

blade and can cause severe injury.

• Always wear safety glasses or eye

shields when starting and while using

your mower.

• Dress properly. Do not operate mower

when barefoot or wearing open sandals.

Wear only solid shoes with good traction

when mowing.

•Check fuel tank before starting engine.

Do not fill gas tank indoors, when the

engine is running or when the engine is

hot. Allow the engine to cool for several

minutes before filling the gas tank. Clean

off any spilled gasoline before starting

the engine.

•Always make wheel height adjustments

before starting your mower. Never

attempt to do this while the engine is

running.

•Mow only in daylight or good artificial

light.

OPERATION:

•Keep your eyes and mind on your

mower and the area being cut. Do not let

other interests distract you.

•Do not mow wet or slippery grass. Never

run while operating your mower. Always

be sure of your footing -- keep a firm

hold on the handles and walk.

•Do not put hands or feet near or under

rotating pads. Keep clear of the dis-

charge opening at all times.

• Always stop the engine whenever you

leave or are not using your mower, or

before crossing driveways, walks, roads,

and any gravel---covered areas.

•Never direct discharge of material

toward bystanders nor allow anyone

near the mower while you are operating

it.

•Before cleaning, inspecting, or repairing

your mower, stop the engine and make

absolutely sure the blade and all moving

parts have stopped. Then disconnect the

spark plug wire and keep it away from

the spark plug to prevent accidental

starting.

°Do not continue to run your mower if you

hit a foreign object. Follow the procedure

outlined above, then repair any damage

before restarting and operating you

mower.

•Do not change the governor settings or

overspeed the engine. Engine damage

or personal injury may result.

•Do not operate your mower if it vibrates

abnormally. Excessive vibration is an

indication of damage; stop the engine,

safely check for the cause of vibration

and repair as required.

• Do not run the engine indoors. Exhaust

fumes are dangerous.

•Never cut grass by pullingthe mower

towards you. Mow acrossthe face of

slopes, never up and down or you

might lose your footing. Do not mow

excessively steep slopes. Use caution

when operating the mower on uneven

terrain or when changing directions--

maintain good footing.

• Never operate your mower without

proper guards, plates, grass catcher or

other safety devices in place.

MAINTENANCE AND STORAGE:

•Check the blade and the engine

mounting bolts often to be sure they are

tightened properly.

•Check all belts, nuts and screws at

frequent intervals for proper tightness to

be sure mower is in safe working

condition.

•Keep all safety devices in place and

working.

•To reduce fire hazard, keep the engine

free of grass, leaves or excessive

grease and oil.

•Check grass catcher often for deteriora-

tion and wear and replace wom bags.

Use only replacement bags that are

recommended by and comply with

specifications of the manufacturer of

your mower.

•Always keep a sharp blade on your

mower.

•Allow engine to cool before storing in

any enclosure.

•Never store mower with fuel in the tank

inside a building where fumes may

reach an open flame or an ignition

source such as a hot water heater,

space heater, clothes dryer, etc.

ALook for this symbol to point out

important safety precautions. It means

CAUTION!!I BECOMEALERT!!! YOUR

SAFETY IS INVOLVED.

_CAUTION: Always disconnect spark

plug wire and place wire where it cannot

contact spark plug in order to prevent

accidental starting when setting up,

transporting, adjusting or making repairs.

A, WARNING

The engine exhaust from this product

contains chemicals known to the State of

California to cause cancer, birth defects,

or other reproductive harm.

Theseaccessorieswereavailablewhenthislawnmowerwasproduced.Theyarenot

shippedwithyour mower.TheyarealsoavailableatmostSearsretailoutletsandservice

centers.MostSearsstorescanalsoorderrepairpartsforyou,whenyouprovidethemodel

numberofyourlawnmower.Someofthese accessoriesmay notapplytoyourlawnmower.

LAWN MOWER PERFORMANCE ,

CLIPPING DEFLECTOR

FOR REAR DISCHARGE LAWN MOWERS

GRASS CATCHERS

FOR

REAR DISCHARGE

LAWN MOWERS

MULCHER KITS

_/! GRASS CATCHERS

FOR

SIDE DISCHARGE

LAWN MOWERS

LAWN MOWER MAINTENANCE

BLADE ADAPTERS

MUFFLERS

BELTS BLADES

AIR FILTERS

WHEELS

STABILIZER

GAS CANS

SPARK PLUGS

ENGINE OIL

Read these instructionsand this manual in its

entirety before you attempt to assemble or

operate your new lawn mower.

IMPORTANT: This lawn mower is

shipped WITHOUT OIL OR GASOLINE in

the engine.

Your new lawn mower has been assembled

at the factory with the exception of those parts

left unassemblad for shipping purpo6as. All

parts such as nuts, washers, bolts, etc.,

necessary to complete the assembly have

been placed in the parts bag. To ensure safe

and proper operation of your lawn mower, all

parts and hardware you assemble must be

tightened securely. Use the correct tools as

necessary to ensure proper tightness.

TO REMOVE LAWNMOWER FROM

CARTON

• Remove loose parts included with mower.

•Cut down two end comers of carton and

lay end panel down flat.

•Remove all packing materials except

padding between upper and lower handle

and padding holding operator presence

control bar to upper handle.

•Roll lawn mower out of carton and check

carton thoroughly for additional loose parts.

HOW TOSET UPYOUR LAWN MOWER

TO UNFOLD HANDLE

IMPORTANT: Unfold handles carefully so

as not to pinch or damage control cables.

•Raise handles until lower handle section

locks into place in mowing position.

•Remove protective padding, raise upper

handle section into place on lower handle

and tighten beth handle knobs.

•Remove handle padding holding operator

presence control bar to upper handle.

• Your lawn mower handle can be adjusted

for your mowing comfort. Refer to "Adjust

Handle" in the Service and Adjustment

section of this manual.

Operator presence control

bar _,.

Upper handle _Lift up

Lift up _,_

-._.. Mowing

_.- position

Lower handle

TO INSTALL ATI'ACHMENTS

Yourlawn mowerwas shippedreadyto be

usedas a mulcher. Toconverttobaggingor

discharging:

• Open rear door and removemulcherplug.

Store mulcherplug ina safe place.

•You can now installcatcheror optional

clippingdeflector.

•To retumto mulchingoperation,install

mulcherplug into dischargeopeningof

mower. Be sure alltabsare seated

pmpedy.

Mulcher plu_

&CAUTION: Do not run your lawn

mower without mulcher plug in place or

approved clipping deflector or grass

catcher in place. Never attempt to

operate the lawn mower with the rear

door removed or propped open.

KNOW YOUR LAWN MOWER

READ THIS OWNER'S MANUALAND SAFETY RULES BEFORE OPERATING YOUR LAWN

MOWER. Compare the illustrationswith your lawn mower to familiarize yourself with the

k_,,ation_f various controls and adiustments. Save this manual for future mf_r_pn_T

These=ymbob mayappearon yourlawnmowaror In rc_ndure_ppaed with_e pcodud._ _

undea_t=_ U_e_emeaning.

CAUTION ENGINE ENGINE FAST SLOW CHOKE FUEL OIL DANGER, KEEP HANDS

OR WARNING ON OFF AND FEET AWAY

Engine zone control cable Operator presence control bar

Drive control lever

Starter handle

Grass catchel

Mulcher plug

Handle knob

Engine oil

cap w/

Housing

Gasoline cap

cover

Primer

IMPORTANT: This lawn mower is

shipped WITHOUT OIL OR GASOLINE in Wheel adjuster

the engine. (on each wheel)

MEETS CPSC SAFETY REQUIREMENTS

Sears rotary walk-behind power lawn mowers conform to the safety standards of the American

National Standards Institute and the U,S. Consumer Product Safety Commission. The blade

turns when the engine is running.

Operator presence control bar -must be

held down to the handle to start the engine.

Release to stop the engine.

Pdmer - pumps additional fuel from the

carburetor to the cylinder for use when

starting a cold engine.

Starter handle -used for starting the engine.

Drive control lever -used to engage power-

propelled forward motion of lawn mower.

Mulcher plug - must be removed toconvert to

bagging or discharging operation.

Theoperationof any lawn

mowercan resultinforeign

objectsthrownintotheeyes,

which can result in severe eye damage.

Always wear safety glasses or eye shields

while operating your lawn mower or

performing any adjustments or repairs.

We recommend a wide vision safety mask

over spectacles or standard safety

glasses.

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED

The engine speed was set at the factory

for optimum performance. Speed is not

adjustable.

ENGINE ZONE CONTROL

ACAUTION: Federal regulations require

an engine control to be installed on this

lawn mower in order to minimize the risk

of blade contact injury. Do not under any

circumstances attempt to defeat the

function of the operator control. The blade

turns when the engine is running.

•Your lawn mower is equipped with an

operator presence control bar which

requires the operator to be positioned

behind the lawn mower handle to start and

operate the lawn mower.

TO ADJUST cUTrlNG HEIGHT

•Raise wheels for low cut and lower wheels

for high cut.

•Adjust cutting height to suit your requke-

merits. Medium position is best for most

lawns.

•To change cutting height, squeeze adjuster

lever toward wheel. Move wheel up or

down to suit your requirements. Be sure a/I

wheels are in the same setting.

NOTE: Adjuster is propedy positioned

when plate tab inserts into hole in lever.

Also, 9-position adjusters (if so equipped)

allow lever to be positioned between the

plate tabs.

Plate Tab

Lower Wheels for High Cutr---'_._..w

ovor

Raise Wheels for Low Cut

TO ATTACH GRASS CATCHER

• Close the lifttop lid. Lifttop lid must be

closed wh_ operating lawn mower.

• Liftthe rear door on the mower housing

and place _grass catcher frame onto the

formed tabs on the rear door hinge

bracket.

•The grass catcher is secured to the lawn

mower housing when the rear door is

lowered onto the grass catcher frame.

_CAUTION: Do not run your lawn

mower without clipping deflector or

approved grass catcher in place. Never

attempt to operate the lawn mower with

the rear door removed or propped open,

Hinge Rear door

Grass catcher

frame

tabs

TO EMPTY GRASS CATCHER

•To remove grass catcher, release operator

presence control bar to stop engine.

•Liftup rear door and remove the grass

catcher by the handle.

NOTE: Do not drag the bag when

emptying; it will cause unnecessary wear.

DRIVE CONTROL

•Serf-propelling is controlled by holding

the operator presence control bar down

to the handle and pushing the ddve

control lever forward until it clicks; then

release the lever.

•Forward motion will stop when the

operator presence control bar is

released. To stop forward motion

without stopping engine, release the

operator presence control bar slightly

until the ddve control disengages. Hold

operator presence control bar down to

handle to continue mowing without serf-

propelling.

•To keep drive control engaged when

turning corners, push down on handle

and lift front wheels off ground while

turning lawn mower.

Operator presence control bar Drive

control

To engage Drive control

ddve control disengaged

BEFORE STARTING ENGINE

OIL

Your lawn mower is shipped without oil in the

engine.

•Be sure mower is level and area around oil

fillis clean.

•Remove engine oil cap and fillto the full

line on the dipstick.

NOTE: Allow oil to settle down into engine

for accurate dipstick reading.

•Engine holds 27 ozs. of oil. Fortype and

grade of oil to use, see "ENGINE" in

Maintenance section of this manual.

•Pour oil slowly. Do not over fill.

•Check oil level before each use. Add oil if

needed. Fillto full line on dipstick.

•To read proper level, tighten engine oil cap

each time.

•Reinstall engine oil cap and tighten.

•Change the oil after every 25 hours of

operation or each season. You may need

to change the oil more often under dusty,

dirty conditions.

ADD GASOUNE

•Fillfueltank.Use fresh, clean, regular

unleaded gasoline wt_ a minimum of 87

octane. Do not mix oil with gasoline.

Purchase fuel in quanti_es that can be

used within 30 days to assure fuel

freshness.

_kWARNING: Experience indicates that

alcohol blended fuels (called gasohol or

using ethanol or methanol) can attract

moisture which leads to separation and

formation of acids during storage. Acidic

gas can damage the fuel system of an

engine while in storage. To avoid engine

problems, the fuel system should be

emptied before storage of 30 days or

longer. Drain the fuel tank, start the

engine and let it run until fuel lines and

carburetor are empty. Use fresh fuel next

season. See Storage Instructions for

additional information. Never use engine

or carburetor cleaner products in fuel tank

or permanent damage may occur.

ACAUTION: Fill to bottom of gas tank

filler neck. Do not overfill. Wipe off any

spilled oil or fuel. Do not store, spill or

use gasoline near an open !lame.

Gasoline filler cap Engine oil cap

TO START ENGINE

•To start acold engine, push primer three

(3) times before tryingto slad. Use afirm

push. This step is not usually necessary

when starting an engine which has

already run for afew minutes.

•Hold operator presence control bar down

to the handle and pull starter handle

quickly. DO not allow starter rope to snap

back.

•To stop engine, release operator presence

control bar.

NOTE: In cooler weather it may be

necessary to repeat priming steps. In

warmer weather over priming may cause

flooding and engine will not start. If you

do flood engine, wait a few minutes

before attempting to start and do not

repeat pdming steps,

MOWING TIPS

•Under cedain conditions, such as very

tall grass, it may be necessary to raise

the height of cut to reduce pushing

effort and to keep from overloading the

engine and leaving clumps of grass

clippings. It may also be necessary to

reduce ground speed and/or run the

lawn mower over the area a second

time.

•For extremely heavy cutting, reduce the

width of cut by overlapping previously

cut path and mow slowly.

•For better grass bagging and most

cutting conditions, the engine speed

should be set in the fast position.

•When using arear discharge lawn

mower in moist, heavy grass, clumps of

cut grass may not enter the grass

catcher. Reduce ground speed

(pushing speed) and/or run the lawn

mower over the area a second time.

*If a trail of clippings is left on the right

side of a rear discharge mower, mow in

aclockwise direction with a small

overlap to collect the clippings on the

next pass.

•Pores in cloth grass catchers can

become filled with dirt and dust with use

and catchers will collect less grass. To

prevent this, regularly hose catcher off

with water and let dry before using.

•Keep top of engine around starter clear

and clean of grass clippings and chaff.

This will help engine air flow and

extend engine life.

MULCHING MOWING TIPS

IMPORTANT: For bsst performance, keep

mower housing free of built-up grass and

trash. See "Cleaning" in Maintenance section

of this manual.

•The special mulching blade will recut the

grass clippings many times and reduce

them in size so that as they fall onto the

lawn they willdisperse into the grass and

not be noticed. Also, the mulched grass

will biodegrade quickly to provide nutrients

for the lawn. Always mulch with your

highest engine (blade) speed as this will

provide the best recutting action of the

blades.

•Avoid cutting your lawn when itis wet. Wet

grass tends to form clumps and interferes

with the mulching action. The best time to

mow your lawn is the early afternoon. At

this time the grass has dried and the newly

cut area will not be exposed to the direct

sun.

• For best results, adjust the lawn mower

cutting height so that the lawn mower cuts

off only the top one-third ofthe grass

blades. Ifthe lawn is overgrown itwill be

necessary to raise the height of cut to

reduce pushing effort and to keep from

overloading the engine and leaving

clumps of mulched grass. For extremely

heavy mulching, reduce your width of cut

by overlapping previously cut path and

mow slowly.

•Certain types of grass and grass condi-

tions may require that an area be mulched

a second time to completely hide the

clippings. When doing a second cut, mow

across or perpendicular to the firstcut path.

•Change your cuffing pattem from week to

week. Mow north to south one week then

change to east to west the next week. This

will help prevent matting and graining of

the lawn.

MAINTENANCE SCHEDULE _ _/_ ,_ ,_O_ _'_

FlU.,NDATES

Check for LooseFasteners It/ I II/'

Claan/Inspect GrassCatcher

(if Equipped) i,/ t__

oi Clean Lawn MowerClean Under DriveCover

(Power-PropelledMowersII1_

W Check drivebelVpulleys

(Power-PropalladMowars) ll/

RCheck/Sharpen/Replace Blade ,!,/s

Lubrication Chart iv/ I_

Clean Battery/Recher_e

/Electric Start Mowers II_ IP/4

RECheck EngineOil Level !_/

Change EngineOil I/1.2

IG Clean Air Filter _ = I

Inspect Muffler

EN Clean or Replace Spark Plug

ReplaceAir Filter Paper Cartridge I/'2

1-Change more often when operat}ng under a heavy load or Inhigh ambient temperatures.

2 - Service more o_len when operating In dirty ot dusly coodltl0ns.

3 * ReplaCe blades more often when mowing In sandy solt.

4 - Charge 48 hours a! end of Season.

GENERAL RECOMMENDATIONS

The warranty on this lawn mower does

not cover items that have been subjected

to operator abuse or negligence. To

receive full value from the warranty,

operator must maintain mower as

instructed in this manual.

Some adjustments will need to be made

periodically to propedy maintain your unit.

All adjustments in the Service and

Adjustments section of this manual should

be checked at least once each season.

•Once a year, replace the spark plug,

replace air filter element and check

blade for wear. A new spark plug and

clean/new air filter element assures

proper air-fuel mixture and helps your

engine run better and last longer.

•Follow the maintenance schedule in

this manual.

BEFORE EACH USE

•Check engine oil level.

•Check for loose fasteners.

LUBRICATION

Keep unit well lubricated (See "LUBRICA-

TION CHART").

LUBRICATION CHART

(_) Wheel adjuster

Rear door hinge

(_) Handle bracket mounting pin

(D Spray lubricant

(_) Refer to Maintenance "ENGINE" section.

IMPORTANT: Do not oil or grease plastic

wheel bearings. Viscous lubricants will

attract dust and dirt that will shorten the

life of the self lubricating bearings, if you

feel they must be lubricated, use only a

dry, powdered graphite type lubricant

sparingly.

Inhaltsverzeichnis

Andere Craftsman Rasenmäher Handbücher

Craftsman

Craftsman 917.37945 Bedienungsanleitung

Craftsman

Craftsman 917.273631 Bedienungsanleitung

Craftsman

Craftsman 25416 Bedienungsanleitung

Craftsman

Craftsman 38820 Bedienungsanleitung

Craftsman

Craftsman 917.254244 Bedienungsanleitung

Craftsman

Craftsman 917.28842 Bedienungsanleitung

Craftsman

Craftsman 917.273051 Bedienungsanleitung

Craftsman

Craftsman 917.28853 Bedienungsanleitung

Craftsman

Craftsman 917.275000 Bedienungsanleitung

Craftsman

Craftsman EZ3 917.377200 Bedienungsanleitung

Craftsman

Craftsman 917.256571 Bedienungsanleitung

Craftsman

Craftsman 917.376561 Bedienungsanleitung

Craftsman

Craftsman T1000 series Bedienungsanleitung

Craftsman

Craftsman 917.371701 Bedienungsanleitung

Craftsman

Craftsman 917.274030 Bedienungsanleitung

Craftsman

Craftsman 917.271832 Bedienungsanleitung

Craftsman

Craftsman T200 Series Bedienungsanleitung

Craftsman

Craftsman 917.289244 Bedienungsanleitung

Craftsman

Craftsman 917.273142 Bedienungsanleitung

Craftsman

Craftsman 25320 Bedienungsanleitung

Craftsman

Craftsman 917.371720 Bedienungsanleitung

Craftsman

Craftsman 917.377171 Bedienungsanleitung

Craftsman

Craftsman 917.378460 Bedienungsanleitung

Craftsman

Craftsman 917.273610 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung