Craftsman 917.387256 Bedienungsanleitung

Owner's Manual

rRAFTSMAN°

4.0 HORSEPOWER

20" REAR DISCHARGE

ROTARY LAWN MOWER

Model No,

917.387256

• Safety

• Assembly

•Operation

• Maintenance

•Espa_ol

• Repair Parts

CAUTION:

Read and follow all

Safety Rules and Instructions

before operating this equipment

Sears, Roebuck and Co., Hoffman Estates, IL 60179

Visit our Craftsman website: www.sears.com/craftsman

Warranty 2 Product Specifications 9

Safety Rules 2 Service and Adjustments 11

Assembly 4 Storage 13

Operation 5 Troubleshooting 14

Maintenance Schedule 8 Repair Parts 30

Maintenance 8 Parts Ordering Back Cover

LIMITED ONE YEAR WARRANTY ON CRAFTSMAN POWER MOWER

For one year from date of purchase, when this Craftsman Lawn Mower is maintained,

_ubricated, and tuned up according to the operating and maintenance instructions in the

owner's manual, Sears will repair free of charge any defect in material or workmanship.

If this Craftsman Lawn Mower is used for commercial or rental purposes, this warranty

applies for only 90 days from the date of purchase.

This Warranty does not cover:

• Expendable items which become worn during normal use, such as rotary mower

blades, blade adapters, belts, air cleaners and spark plug.

• Repairs necessary because of operator abuse or negligence, including bent crank-

shafts and the failure to maintain the equipment according to the instructions con-

tained in the owner's manual.

Warranty service is available by returning the Craftsman power mower to the nearest

Sears Service Center/Department in the United States. This warranty applies only while

this product is in use in the United States.

This Warranty gives you specific legal dghts, and you may also have other rights which

vary from state to state.

SEARS, ROEBUCK AND CO., D/817 WA, HOFFMAN ESTATES, ILLINOIS 60179

Safety standards require operator pres- •

ence controls to minimize the risk of injury.

Your unit is equipped with such controls.

Do not attempt to defeat the function of the

operator presence controls under any

circumstances.

TRAINING: ......

• Read this operator's manual carefully_ _" '

Become familiar with the controls and ": "

know how to operate your mower .... :

Do not operate mower if it has been

dropped or damaged in any manner.

Always have damage repaired before

using your mower.

Do not use accessory attachments that

are not recommended by the manufac-

turer. Use of such attachments may be

hazardous.

The blade turns when the engine is

running.

properly. Leam how to quickly stop '_ PREPARATION:

mower. ,_ •Always thoroughly check the area to be

•Do not allow children'to_use-your mOwe:=:.__ mowed and clear it of all stones, sticks,

Never allow adults to use mower wit_ut "wires, bones, and other foreign objects.

proper instructions ....... :. _i _:

• Keep the area of operation clear of all

persons, especially small children and

pets.

• Use mower only as the manufacturer

intended and as described in this manual.

These objects will be thrown by the blade

and can cause severe injury.

•Always wear safety glasses or eye

shields when starting and while using

your mower.

• Dress properly. Do not operate mower

when barefoot or wearing open sandals.

Wear only solid shoes with good traction

when mowing.

•Check fuel tank before starting engine.

Do not fill gas tank indoors, when the

engine is running or when the engine is

hot. Allow the engine to cool for several

minutes before filling the gas tank. Clean

off any spilled gasoline before starting the

engine.

•Always make wheel height adjustments

before starting your mower. Never

attempt to do this while the engine is

running.

• Mow only in daylight or good artificial

light.

OPERATION:

•Keep your eyes and mind on your mower

and the area being cut. Do not let other

interests distract you.

•Do not mow wet or slippery grass. Never

run while operating your mower. Always

be sure of your footing -- keep a firm

hold on the handles and walk.

•Do not put hands or feet near or under

rotating parts. Keep clear of the discharge

opening at all times.

•Always stop the engine whenever you

leave or are not using your mower, or

before crossing driveways, walks, roads,

and any gravel-_covered areas.

•Never direct discharge of material toward

bystanders nor allow anyone near the

mower while you are operating it.

•Before cleaning, inspecting, or repaidng

your mower, stop the engine and make

absolutely sure the blade and all moving

parts have stopped. Then disconnect the

spark plug wire and keep it away from the

spark plug to prevent accidental starting.

• Do not continue to run your mower if you

hit a foreign object. Follow the procedure

outlined above, then repair any damage

before restarting and operating you

mower.

• Do not change the governor settings or

overspeed the engine. Engine damage or

personal injury may result.

• Do not operate your mower if it vibrates

abnormally. Excessive vibration is an

indication of damage; stop the engine,

safely check for the cause of vibration

and repair as required.

•Do not run the engine indoors. Exhaust

fumes are dangerous.

•Never cut grass by pulling the mower

towards you. Mow across the face of

slopes, never up and down or you might

lose your footing. Do not mow exces-

sively steep slopes. Use caution when

operating the mower on uneven terrain

or when changing directions -- maintain

good footing.

• Never operate your mower without

proper guards, plates, grass catcher or

other safety devices in place.

MAINTENANCE AND STORAGE:

•Check the blade and the engine mount-

ing bolts olten to be sure they are

tightened properly.

•Check all bolts, nuts and screws at

frequent intervals for proper tightness to

be sure mower is in safe working

condition.

•Keep all safety devices in place and

working.

• To reduce fire hazard, keep the engine

free of grass, leaves or excessive grease

and oil.

•Check grass catcher often for deteriora-

tion and wear and replace worn bags.

Use only replacement bags that are

recommended by and comply with

specifications of the manufacturer ofyour

mower.

•Always keep a sharp blade on your

mower.

•Allow engine to cool before storing in any

enclosure.

•Never store mower with fuel in the tank

inside a building where fumes may reach "

an open flame or an ignition source such

as a hot water heater, space heater,

clothes dryer, etc.

CAUTION: Always disconnect spark p_ug

wire and place wire where it cannot

contact spark plug in order to prevent

accidental starting when setting up,

transporting, adjusting or making repairs.

WARNING

The engine exhaust from this product

contains chemicals known to the State of

California to cause cancer, birth defects,

or other reproductive harm.

Theseaccessorieswereavailablewhenthislawnmowerwasproduced.Theyarenotshipped

withyourmower.TheyarealsoavailableatmostSearsretailoutletsandservicecenters.Most

Sears stores can also order repairpartsfor you, when you providethe model number ofyour

lawn mower. Some ofthese accessoriesmay notapply to yourlawn mower.

LAWN MOWER PERFORMANCE

CUPPING DEFLECTOR

FOR REAR DISCHARGE LAWN MOWERS

STABlUZER

GAS CANS

MULCHER KITS

GRASS CATCHERS _GRASS CATCHERS

FOR FOR

REAR DISCHARGE SIDE DISCHARGE

LAWN MOWERS LAWN MOWERS

LAWN MOWER MAINTENANCE

MUFFLERS AIR FILTERS SPARK PLUGS-

BELTS BLADES BLADE ADAPTERS WHEELS ENGINE OIL

Read these instructions and this manual

in its entirety before you attempt to

assemble or operate your new lawn

mower.

IMPORTANT: This lawn mower is shipped

WITHOUT OIL OR GASOLINE in the

engine.

Your new lawn mower has been as-

sembled at the factory with the exception

of those parts left unassembled for

shipping purposes. All parts such as nuts,

washers, bolts, etc., necessary to com-

plete the assembly have been placed in

the parts bag. To ensure safe and proper

operation of your lawn mower, all parts

and hardware you assemble must be

tightened securely. Use the correct tools

as necessary to ensure proper tightness.

TO REMOVE LAWN MOWER FROM

CARTON

• Remove loose parts included with

mower.

•Cut down two end corners ef carton

and lay end panel down flat.

•Remove all packing materials except

padding between upper and lower

handle and padding holding operator

presence control bar to upper handle.

• Roll lawn mower out of carton and

check carton thoroughly for additional

loose parts.

HOW TO SET UP YOUR LAWN

MOWER

TO UNFOLD HANDLE

IMPORTANT: Unfold handles carefully

so as not to pinch or damage control

cables.

•Raise handles until lower h_ndle

section locks into place in mowincl

position.

•Remove protective padding, raise upper Operator presence control bar

handle section into place on lower

handle and tighten both handle knobs, u Liftup

•Remove handle padding holding

operator presence control bar to upper Lift up

handle.

•Your lawn mower handle can be

adjusted for your mowing comfort. Mowing

Refer to "Adjust Handle" in the Service position

and Adjustment section of this manual.

Lower handle

KNOW YOUR LAWN MOWER

READ THIS OWNER'S MANUAl_AND SAFETY RULES BEFORE OPERATING YOUR LAWN

MOWER. Compare the illustrationswith your lawn mower to familiarizeyourself with the

location ofvarious controlsand adjustments. Save this manual for future referance.

These symbols may appear on your lawn mower or in literature supplied with the

product. Learn and understand their meaning.

CAUTION EP_IINE ENGINE F,_ST SLOW CHOKE FUEL OIL DANGER. KEEP HANDS

OR WARNING ON OFF AND FEET AWAY

Engine zone control....

cable Operator presencecontrolbar

Starter handle

Handl_

Grass

,Gasolinefiller cap

Airfilter

Primer

Lawnmower housing

Engine oilplug

IMPORTANT: This lawn mower is

shipped WITHOUT OIL OR GASOLINE _jduster

in the engine. (on each wheel)

MEETS CPSC SAFETY REQUIREMENTS

Sears rotarywalk-behind power lawn mowers conformto the safety standards ofthe American

National Standards Instituteand the U.S. Consumer Product Safety Commission. The blade

tums when the engine is running.

uperator presence control par -must De Primer -pumps additionalfuel from the

held down to the handle to startthe engine, carburetor to the cylinderfor use when starting

Release to stopthe engine, a cold engine.

Starter handle -used for startingthe engine.

Theoperationofanylawnmower can

result in foreign objects thrown into the

eyes, which can result in severe eye

damage. Always wear safety glasses or

eye shields while operating your lawn

mower or performing any adjustments or

repairs. We recommend awide vision

safety mask over spectacles or standard

safety glasses.

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED CONTROL

The engine speed was set at the factory

for optimum performance. Speed is not

adjustable.

ENGINE ZONE CONTROL

CAUTION: Federal regulations require an

engine control to be installed on this lawn

mower in order to minimize the risk of

blade contact injury. Do not under any

circumstances attempt to defeat the

function of the operator control. The blade

turns when the engine is running.

•Your lawn mower is equipped with an

operator presence control bar which

requires the operator to be positioned

behind the lawn mower handle to start

and operate the lawn mower.

TO ADJUST CUTTING HEIGHT

•Raise wheels for low cut and lower

wheels for high cut.

•Adjust cutting height to suit your

requirements. Medium position is best

for most lawns.

•To change cutting height, squeeze

adjuster lever toward wheel. Move

wheel up or down to suit your require-

ments. Be sure all wheels are in the

same setting.

NOTE: Adjuster is properly positioned

when plate tab inserts into hole in lever.

Also, 9-position adjusters (if so equipped)

allow lever to be positioned between the

plate tabs.

Lower wheels for

Raise wheels for low Plate tab

cut

TO ATTACH GRASS CATCHER

• Close the flip lid. Flip lid must be closed

while operating lawn mower.

• Lift the rear door on the mower housing

and place the grass catcher frame onto

the formed tabs on the rear door hinge

bracket.

• The grass catcher is secured to the lawn

mower housing when the rear door is

lowered onto the grass catcher frame.

CAUTION: Do not run your lawn mower

without clipping deflector or approved

grass catcher in place. Never attempt to

operate the lawn mower with the rear door

removed or propped open.

bracketFormed

tabs

Grass

frame

TO EMPTY GRASS CATCHER

•To remove grass catcher, release

operator presence control bar to stop

engine.

•Lift up rear door and remove the grass

catcher by the handle.

NOTE: Do not drag the bag when

emptying; it will cause unnecessary wear.

BEFORE STARTING ENGINE

OIL

Your lawn mower is shipped without oil in

the engine.

•Be sure mower is level and area around

oil fill is clean.

• Remove engine oil plug and fill to the full

line on the dipstick.

NOTE: Allow oil to settle down into engine

for accurate dipstick reading.

•Engine h01ds 20 ozs. of oil. For type

and grade of oil to use, see "ENGINE" in

Maintenance section of this manual.

•Pour oil slowly. Do not overfill.

•Check oil level before each use. Add oil

if needed. Fill to full line on dipstick.

•To read proper level, tighten engine oil

plug each time.

• Reinstall engine oil plug and tighten.

•Change the oil after every 25 hours of

operation or each season. You may

need to change the oil more often under

dusty, dirty conditions.

GAS

• Fill fuel tank. Use fresh, clean, regular

unleaded gasoline with a minimum of 87

octane. (Use of leaded gasoline will

increase carbon and lead oxide deposits

and reduce valve life). Do not mix oil

with gasoline. Purchase fuel in quanti-

ties that can be used within 30 days to

assure fuel freshness.

WARNING: Experience indicates that

alcohol blended fuels (called gasohol or

using ethanol or methanol) can attract

moisture which leads to separation and

formation of acids during storage. Acidic

gas can damage the fuel system of an

engine while in storage. To avoid engine

problems, the fuel system should be

emptied before storage of 30 days or

longer. Drain the gas tank, start the

engine and let it run until the fuel lines and

carburetor are empty. Use fresh fuel next

season. See Storage Instructions for

additional information. Never use engine

or carburetor cleaner products in the fuel

tank or permanent damage may occur.

Gasoline filler

cap

(Discard debris

pluginside)

Engine oil

TO START ENGINE

•To startacoldengine, push primer five (5)

times beforetrying to start. Use a firm push.

This step isnot usually necessary when

startingan engine which has already run for

afew minutes.

•Holdoperator presence controlbar down to

the handle and pullstarter handle quickly.

Do notallow starter rope to snap back.

•To stopengine, release operator presence

controlbar.

NOTE: In cooler weather it may be necessary

to repeat priming steps. Inwarmer weather

over priming may cause flooding and engine

will not start. Ifyou do flood engine, wait a few

minutes before attempting to start and do not

repeat priming steps.

MOWING TIPS

•Under certain conditions, such as very

tall grass, it may be necessary to raise

the height of cut to reduce pushing effort

and to keep from overloading the engine

and leaving clumps of grass clippings. It

may also be necessary to reduce

ground speed and/or run the lawn

mower over the area a second time.

• For extremely heavy cutting, reduce the

width of cut by overlapping previously

cut path and mow slowly.

• For better grass bagging and most

cutting conditions, the engine speed

should be set in the fast position.

• When using a rear discharge lawn

mower in moist, heavy grass, clumps of

cut grass may not enter the grass

catcher. Reduce ground speed (push-

ing speed) and/or run the lawn mower

o,_er the area a second time.

• If a trail of clippings is left on the right

side of a rear discharge mower, mow in

a clockwise direction with a small

overlap to collect the clippings on the

next pass.

• Pores in cloth grass catchers can

become filled with dirt and dust with use

and catchers will collect less grass. To

prevent this, regularly hose catcher off

with water and let dry before using.

• Keep top of engine around starter clear

and clean of grass clippings and chaff.

This will help engine air flow and extend

engine life.

MAINTENANCE SCHEDULE

FILL IN DATES

AS YOU COMPLETE

REGULAR SERVICE SERVICE DATES

Check for Loose Fasteners "V t " ' '

Clean/Inspect Grass Catcher

(If Equipped) _' i__

iiClean t.awn Mower

O Clean Under Drive Cover(Power-Propelled Mowers) tf

Check drive belt/pulleys

E (Power-Propelled Mowers) t'/

Check/Sharpen/Replace Blade b/' s

Lubrication Chart it/ If

Clean Battery/Recharge

IElectric Start Mowers 1 it/ $/4

ECheck Engine Oil Level b/

NChange Engine Oil i/1,2

G Clean Air Filter Ii/ 2

I Inspect Muffler _/

NClean or Replace Spark Plug

E Replace Air Filter Paper Cartridge t/2

I - Changem<_e oftenwhen opera,rig uncuta heaw loador in high ambient temperatures.

2 - Sewice more oftenwhen operating indirtyordustycondi_ns.

3 - Replace blades more c_en when motw_gin sar_y soil

4 - Charge 48 hours alend of season.

GENERAL RECOMMENDATIONS

The warranty on this lawn mower does not

cover itemsthat have been subjected to

operator abuse or negligence. To receive full

value from the warranty, operatormust

maintain mower as instructedin this manual.

Some adjustments willneed tobe made

periodk:allyto properlymaintain yourunit.

Alladjustments inthe Service end Adjust-

ments sectionofthis manual should;be

checked at least once each season:

• Once a year, replace the spark plug, replace

air filter element and check bladefor wear.

A new spark plug and de_uVnewair filter

element assures proper air-fuel mixtureand

helps yourengine run better end lastlonger.

•Follow the maintenance schedule in this

manual.

LUBRICATION CHART

Wheel

adjuster

door

hinge

(_ Brake spdnge

bracket

(_) Engine oil

BEFORE EACH USE

•Check engine oillevel.

•Check forloose fasteners.

LUBRICATION

Keep unitwell lubricated(See "LUBFIICATION

CHART').

(_) Spray lubricant

(_ SAE 30 Motoroil. Refer to ENGINE

MAINTENANCE Section.

IMPORTANT: Do not oil or grease plastic

wheel bearings. Viscous lubricants will

attract dust and dirt that will shorten the life

of the self lubricating bearings. If you feel

they must be lubricated, use only a dry,

powdered graphite type lubricant sparingly.

PRODUCT SPECIFICATIONS

MODEL NUMBER 917.387256

SERIAL NUMBER

DATE OF PURCHASE

HORSEPOWER: 4.0

DISPLACEMENT: 11.5 CU, IN.

GASOLINE CAPACITY/TYPE: 1.25 QUARTS

UNLEADED REGULAR

OIL TYPE (API-SF/SG/SH): SAE 30 (ABOVE 32°F)

SAE 5W-30 (BELOW 32°F)

OIL CAPACITY: 20 OZS.

SPARK PLUG(GAP: .030") CHAMPION RJ19LM OR J19LM

VALVE CLEARANCE: INTAKE: .004 - .008

EXHAUST: .004 - .008

SOLID STATE IGNITION

_,IR GAP: .0125 IN.

BLADE BOLT TORQUE: 35-40 FT. LBS.

The model and serial numbers will be found on a decal attached to the rear of the

lawn mower housing.Record both serial number and date of purchase in space

provided above.

LAWN MOWER •Remove blade and attaching hardware

(bott, lock washer and hardened

washer).

NOTE: Remove the blade adapter and

check the key inside hub of blade adapter.

The key must be in good condition to work

properly. Replace adapter if damaged.

Always observe safety rules when

performing any maintenance.

TIRES

•Keep tires free of gasoline, oil, or insect

control chemicals which can harm

rubber.

•Avoid stumps, stones, deep ruts, sharp

objects and other hazards that may

cause tire damage.

BLADE CARE

For best results, mower blade must be

kept sharp. Replace bent or damaged

blades.

TO REMOVE BLADE

•Disconnect spark plug wire from spark

plug and place wire where it cannot

come in contact with spark plug.

• Turn lawn mower on its side. Make sure

air fi_ter and carburetor are up.

• Use a wood block between blade and

mower housing to prevent blade from

turning when removing blade bolt.

Protect your hands with gloves and/or

wrap blade with heavy cloth. ;

• Remove blade bolt by turning=counter-

clockwise.

TO REPLACE BLADE

•Position the blade adapter on the engine

crankshaft. Be sure key in adapter and

crankshaft keyway are aligned.

•Position blade on the blade adapter

aligning the two (2) holes in the blade

with the raised lugs on the adapter.

•Be sure the trailing edge of blade

(opposite sharp edge) is up toward the

engine.

• Install the blade bolt with the lock

washer and hardened washer into blade

adapter and crankshaft.

• Use block of wood between blade and

lawn mower housing and tighten the

blade bolt, turning clockwise.

• The recommended tightening torque is

35-40 ft. Ibs.

IMPORTANT: Blade bolt is grade 8heat

treated.

TO SHARPEN BLADE

NOTE: We do not recommend sharpening

blade - but if you do, be sure the blade is

balanced.

Care should be taken to keep the blade

balanced. An unbalanced blade will cause

eventual damage to lawn mower or

engine.

•The blade can be sharpened with a file

or on a grinding wheel. Do not attempt

to sharpen while on the mower.

• To check blade balance, drive a nail into

a beam or wall. Leave about one inch of

the straight nail exposed. Place center

hole of blade over the head of the nail.

If blade is balanced, it should remain in

a horizontal position. If either end of the

blade moves downward, sharpen the

heavy end until the blade is balanced.

Blade Crankshaft

adapter keyway

Key

Blade

bolt

shaft

washer Hardened Blade

washer Trailing adapter

:edge

GRASS CATCHER

•The grass catcher may be hosed with

water, but must be dry when used.

•Check your grass catcher often for

damage or deterioration. Through

normal use it will wear. If catcher needs

replacing, replace only with a manufac-

turer approved replacement catcher.

Give the lawn mower model number

when ordering.

ENGINE

LUBRICATION

Use only high qualitydetergent oil rated with

API service classifP..ationSF, SG or SH.

Select the oil'sSAE viscositygrade according

to your expected operating temperature.

SAIEVISCOSITY GRADES

NOTE: Although multi-viscosityoils (5W30,

10W30 etc.) improve starting in coldweather,

these multi-viscosity oilswill resultin increased

oilconsumptionwhen used above 32°F.

Check your engine oil level more fr_uently to

avoid possibleengine damage from running

low on oil.

Change the oil after every 25 hours of

operation or at least once a year if the

lawn mower is not used for 25 hours in

one year.

Check the crankcase oillevel before starting

the engine and aftereach five (5) hours of

continuoususe. 5ghten oil plug securelyeach

time you check the oillevel.

TO CHANGE ENGINE OIL

•Disconnect spark plug wire from spark

plug and place wire where it cannot

come in contact with spark plug.

•Be sure lawn mower is on level surface.

•Oil will drain more freely when warm.

• Catch oil in a suitable container.

•Remove bottom oil drain plug.

•After oil has drained completely, replace

oil drain plug and tighten securely.

•Refill engine with oil. Pour slowly. Do

not over fill.

•Fill to top of slot inside of filler hole.

•Reconnect spark plug wire to spark

plug.

Drain plug

AIR FILTER

Your engine will not run properly and may

be damaged by using a dirty air filter.

Replace the air filter every year, more

often if you mow in very dusty, dirty

conditions. Do not wash air filter.

TO CHANGE AIR FILTER

•Remove the air filter by turning counter-

clockwise to the stop and pull away from

collar.

• Remove filter from inside of cover.

Inhaltsverzeichnis

Andere Craftsman Rasenmäher Handbücher

Craftsman

Craftsman 917.370701 Bedienungsanleitung

Craftsman

Craftsman 917.272075 Bedienungsanleitung

Craftsman

Craftsman Professional 247.371081 Bedienungsanleitung

Craftsman

Craftsman 917.377842 Bedienungsanleitung

Craftsman

Craftsman 917.379810 Bedienungsanleitung

Craftsman

Craftsman 917.377990 Bedienungsanleitung

Craftsman

Craftsman 247.375900 Bedienungsanleitung

Craftsman

Craftsman 917.275223 Bedienungsanleitung

Craftsman

Craftsman 917.986410 Bedienungsanleitung

Craftsman

Craftsman 917.372260 Bedienungsanleitung

Craftsman

Craftsman 917.377100 Bedienungsanleitung

Craftsman

Craftsman 25554 Bedienungsanleitung

Craftsman

Craftsman 917.27582 Bedienungsanleitung

Craftsman

Craftsman 917.275283 Bedienungsanleitung

Craftsman

Craftsman 917.275685 Bedienungsanleitung

Craftsman

Craftsman 917.371660 Bedienungsanleitung

Craftsman

Craftsman 917.376390 Bedienungsanleitung

Craftsman

Craftsman 917.271041 Bedienungsanleitung

Craftsman

Craftsman 38105 Bedienungsanleitung

Craftsman

Craftsman 917.370872 Bedienungsanleitung

Craftsman

Craftsman 917.276821 Bedienungsanleitung

Craftsman

Craftsman 917.28867 Bedienungsanleitung

Craftsman

Craftsman 917.374552 Bedienungsanleitung

Craftsman

Craftsman 6073308 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung