Craftsman 917.388221 Bedienungsanleitung

Owner's Manual

£RRFTSNI:IN

4.5 HORSEPOWER

22" SIDE DISCHARGE

ROTARY LAWN MOWER

Model No.

917.388221

• Safety

• Assembly

•Operation

•Maintenance

• Espa_ol

•Repair Parts

CAUTION:

Read and follow all

Safety Rules and Instructions

before operating this equipment

Sears, Roebuck and Co., Hoffman Estates, IL 60179

Visit our Craftsman website: www.sears.com/craftsman

Warranty ............................................... 2

Safety Rules ......................................... 2

Assembly .............................................. 4

Operation .............................................. 5

Maintenance Schedule ........................ 9

Maintenance ......................................... 9

Product Specifications .......................... 10

Service and Adjustments ...................... 13

Storage ................................................. 14

Troubleshooting ................................... 15

Repair Parts ..................................... ,... 34

Parts Ordering ...................... Back Cover

LIMITED TWO YEAR WARRANTY ON CRAFTSMAN POWER MOWER

For two years from date of purchase, when this Craftsman Lawn Mower is maintained,

lubricated, and tuned up according to the operating and maintenance instructions in

the owner's manual, Sears will repair free of charge any defect in material or workman-

ship.

If this Craftsman Lawn Mower is used for commercial or rental purposes, this warranty

applies for only 90 days from the date of purchase.

This Warranty does not cover:

• Expendable items which become worn during normal use, such as rotary mower

blades, blade adapters, belts, air cleaners and spark plug.

•Repairs necessary because of operator abuse or negligence, including bent

crankshafts and the failure to maintain the equipment according to the instructions

contained in the owner's manual.

Warranty service is available by returning the Craftsman power mower to the nearest

Sears Service Center/Department in the United States. This warranty applies only

while this product is in use in the United States.

This Warranty gives you specific legal rights, and you may also have other rights which

vary from state to state.

SEARS, ROEBUCKAND CO., D/817 WA, HOFFMAN ESTATES, ILLINOIS 60179

Safety standards require operator

presence controls to minimize the risk of

injury. Your unit is equipped with such

controls. Do not attempt to defeat the

function of the operator presence controls

under any circumstances.

TRAINING:

•Read this operator's manual carefully.

Become familiar with the controls and

know how to operate your mower

properly. Leam how to quickly stop

mower.

•Do not allow children to use your

mower. Never allow adults to use

mower without proper instructions.

•Keep the area of operation clear of all

persons, especially small children and

pets.

•Use mower only as the manufacturer

intended and as described in this

manual.

•Do not operate mower if it has been

dropped or damaged in any manner.

Always have damage repaired before

using your mower.

•Do not use accessory attachments that

are not recommended by the manufac-

turer. Use of such attachments may be

•hazardous.

•The blade turns when the engine is

running.

PREPARATION:

•Always thoroughly check the area to be

mowed and clear it of all stones, sticks,

wires, bones, and other foreign objects.

These objects will be thrown by the

blade and can cause severe injury.

•Always wear safety glasses or eye

shields when starting and while using

your mower.

•Dross properly. Do not operate mower

when barefoot or wearing open

sandals. Wear only solid shoes with

good traction when mowing.

•Check fuel tank before starting engine.

Do not fill gas tank indoors, when the

engine is running or when the engine is

hot. Allow the engine to cool for several

minutes before filling the gas tank.

Clean off any spilled gasoline before

starting the engine.

•Always make wheel height adjustments

before starting your mower. Never

attempt to do this while the engine is

running.

•Mow only in daylight or good artificial

light.

OPERATION:

•Keep your eyes and mind on your

mower and the area being cut. Do not

let other interests distract you.

•Do not mow wet or slippery grass.

Never run while operating your mower.

Always be sure of your footing -- keep

a firm hold on the handles and walk.

•Do not put hands or feet near or under

rotating parts. Keep clear of the

discharge opening at all times.

•Always stop the engine whenever you

leave or are not using your mower, or

before crossing driveways, walks,

roads, and any gravel--coverod areas.

•Never direct discharge of material

toward bystanders nor allow anyone

near the mower while you are operating

it.

•Before cleaning, inspecting, or repair-

ing your mower, stop the engine and

make absolutely sure the blade and all

moving parts have stopped. Then

disconnect the spark plug wire and

keep it away from the spark plug to

prevent accidental starting.

•Do not continue to run your mower if

you hit a foreign object. Follow the

procedure outlined above, then repair

any damage before restarting and

operating you mower.

•Do not change the governor settings or

overspeed the engine. Engine damage

or personal injury may result.

•Do not operate your mower if it vibrates

abnormally. Excessive vibration is an

indication of damage; stop the engine,

safely check for the cause of vibration

and repair as required.

•Do not run the engine indoors. Exhaust

fumes are dangerous.

•Never cut grass by pulling the mower

towards you. Mow across the face of

slopes, never up and down or you

might lose your footing. Do not mow

excessively steep slopes. Use caution

when operating the mower on uneven

terrain or when changing directions --

maintain good footing.

•Never operate your mower without

proper guards, plates, grass catcher or

other safety devices in place.

MAINTENANCE AND STORAGE:

•Check the blade and the engine

mounting bolts often to be sure they

are tightened properly.

•Check all bolts, nuts and screws at

frequent intervals for proper tightness

to be sure mower is in safe working

condition.

•Keep all safety devices in place and

working.

•To reduce fire hazard, keep the engine

free of grass, leaves or excessive

grease and oil.

•Check grass catcher often for deterio-

ration and wear and replace worn

bags. Use only replacement bags that

are recommended by and comply with

specifications of the manufacturer of

your mower.

•Always keep a sharp blade on your

mower.

•Allow engine to cool before storing in

any enclosure.

•Never store mower with fuel in the tank

inside a building where fumes may

roach an open flame or an ignition

source such as a hot water heater,

space heater, clothes dryer, etc.

ALook for this symbol to point out

important safety precautions. It means

CAUTION!t! BECOMEALERT!H YOUR

SAFETY IS INVOLVED.

ACAUTION: Always disconnect spark

plug wire and place wire where it cannot

contact spark plug in order to prevent

accidental starting when setting up,

transporting, adjusting or making repairs.

AWARNING

The engine exhaust from this product

contains chemicals known to the State of

California to cause cancer, birth defects,

or other reproductive harm.

TheseaccessorieswereavaHablawhenthislawnmowerwas produced.They are not

shipped with your mower.TheyarealsoavailableatmostSearsretailo_ets andservice

centers.MostSearsstorescanalsoorderrepair.partsfor you,whenyou providethemodel

numberofyourlawnmower. Someofthese accessoriesmaynotapplytoyourlawnmower.

LAWN MOWER PERFORMANCE

CLIPPING DEFLECTOR

FOR REAR DISCHARGE LAWN MOWERS MULCHER KITS

GRASS CATCHERS

FOR

REARDISCHARGE

LAWN MOWERS

GRASS CATCHERS

FOR

SIDE DISCHARGE

LAWN MOWERS

LAWN MOWER MAINTENANCE

MUFFLERS

BELTS BLADES

AIR FILTSRS

BLADE ADAPTERS WHEELS

STABILIZER

GAS CANS

SPARK PLUGS

ENGINE OIL

Read these instructions and this manual in

its entirety before you attempt to assemble

or operate your new lawn mower.

IMPORTANT: This lawn mower is shipped

WITHOUT OIL OR GASOLINE in the

engine.

Your new lawn mower has been as-

sembled at the factory with the exception of

those parts left unassembled for shipping

purposes. To ensure safe and proper

operation of your lawn mower, all parts and

hardware you assemble must be tightened

securely. Use the correct tools as neces-

sary to ensure proper tightness. All parts

such as nuts, washers, bolts, etc., neces-

sary to complete the assembly have been

placed in the parts bag.

TO REMOVE LAWN MOWER FROM

CARTON

• Remove loose parts included with

mower.

• Cut down two end comers of carton

and lay end panel down flat.

•Remove all packing materials except

padding between upper and lower

handle and padding holding operator

presence control bar to upper handle.

•Roll lawn mower out of carton and

check carton thoroughly for additional

loose parts.

HOW TO SET UP YOUR LAWN

MOWER

TO UNFOLD HANDLE

IMPORTANT: Unfold handle carefully so

as not to pinch or damage control cables.

•Raise handles until lower handle

section locks into place in mowing

position.

•Remove protective padding, raise

upper handle section into place on

lower handle and tighten both handle

knobs.

•Remove handle padding holding

operator presence control bar to upper

handle.

•Your lawn mower handle can be

adjusted for your mowing comfort.

Refer to =Adjust Handle" in the Service

and Adjustment section of this manual.

Operator presence control

bar "_.

Upper handle _Y/U_/

Liftup _ _ !/_ Mowing

KNOWYOURLAWNMOWER

READ THIS OWNER'S MANUALAND SAFETY RULES BEFORE OPERATING YOUR LAWN

MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the

location of various controls and adiustrnents. Save this manual for future reference.

These symbols may appear on your lawn mower or in literature supplied with the

product. Learn and understand their meaning.

CAUTION ENGINE ENGINE FAST SLOW CHOKE FUEL OIL DANGER, KEEP HANDS

OR WARNING ON OFF AND FEET AWAY

Engine zone control cable

control bar

•Starter handle

Handle knob

Engine oil cap with dipstick Gasoline filler cap

Primer

Housing

IMPORTANT: This lawn mower is

shipped WITHOUT OIL OR GASOLINE

in the engine. Wheel adjuster

(on each wheel)

MEETS CPSC SAFETY REQUIREMENTS

Sears rotary walk-behind power lawn mowers conform to the safety standards of the

American National Standards Institute and the U.S. Consumer Product Safety Commis-

sion. The blade turns when the engine is running. I

Operator presence control bar -must be Pdmer - pumps add'dionalfuel from the

held down to the handle to start the engine, carburetor to the cylinderfor use when

Release to stop the engine, startinga cold engine.

Starter handle - used for startingthe engine.

rm +rmremmo+.=y ,rower

can resull in f ..or_._. of:)jectsIf_wn

_?..U_eeyes,wh_hcanresu__

sevmeyeUamage.A_js wearr._sty

glasses or eye shields while opera_ your

lawn mower or performing any adjusbnanls

or repaim. We recommend a wide vision

safety mask over spectacles or standard

safstyg_sses,

HOWTO USEYOUR LAWNMOWER

ENGINE SPEED CONTROL

The engine speed was set at the factory

for optimum performance. Speed is not

adjustable.

ENGINE ZONE CONTROL

_CAUTION: Federal regulations require

an engine control to be installed on this

lawn mower in order to minimize the risk

of blade contact injury. Do not under any

circumstances attempt to defeat the

function of the operator control. The blade

turns when the engine is running.

•Your lawn mower is equipped with an

operator presence control bar which

requires the operator to be positioned

behind the lawn mower handle to start and

operate the lawn mower.

TO ADJUST cUTrlNG HEIGHT

•Raise wheels for low cut and lower wheels

forhkjhcuL

•Adjustcuttingheight to suit your require-

merits. Medium positionisbest for most

lawns.

•To change cuttingheight, squeeze adjuster

lever toward wheel. Move wheel up or

down to suit your requirements. Be sure all

wheels are in the same setting.

NOTE: Adjuster is propedy positioned

when plate tab inserts into hole in lever.

Also, 9-position adjusters (if so equipped)

allow lever to be positioned between the

plate tabs.

Lower wheels for Plate tab

highcut Lever

Raise wheels for low

cut

NOTE: Your lawn mower has been

shipped ready for mulching operation. To

convert to discharging operation, you

mu_t install the discharge deflector "

attachment includedwith your mower.

TO CONVERT TO DISCHARGING

MOWER

Your mower is shipped ready to be used

as a mulcher. To convert to bagging or

discharging:

•Lift discharge guard and remove

mulcher plate.

• Mower can now be used for side

discharge or optional grass catcher can

be attached.

•To retum to mulching operat on, simply

reinstall mulcher plate as shown.

ACAUTION: Do not run your lawn

mower without discharge guard,

approved grass catcher or mulcher plate

in place.

-Hooks

opening

Mulch plate

Hinge

rod

BEFORESTARTING ENGINE

Your lawn mower is shipped withoutoil in the

engine.

•Be sure mower is leveland area around oH

fillis clean.

•I::lemoveengine oilcap and fillto U'_ full

lineon thedipstick

NOTE: Allow oil to settle down into

engine for accurate dipstick reading.

•Engine holds 20ozs. oi oil. Fortypeand

grade of oHto use, see "ENGINE" in

Maintenancesectionoithismanual.

•Pour oilslowly. Donot over filL

•Che_ oil level before each use. Addoilif

needecL FOto lug rm on (f_sSck

• To reed proper level, lighien engine oilcap

each time.

• Reim_an_neoacopand,ghi_

•Chango.Wm oi after every 25 houm of

operation or each seasoR You may need

_change _ oi rnomo_en underde_,

ADD GASOUNE MOWING TIPS

•Fill fuel tank. Use fresh, clean, regular •

unleaded gasoline with a minimum of

87 octane. Do not mix oil with gasoline.

Purchase fuel in quantities that can be

used within 30 days to assure fuel

freshness.

AWARNING: Experience indicates that

alcohol blended fuels (called gasohol or

using ethanol or methanol) can attract

moisture which leads to separation and •

formation of acids during storage. Acidic

gas can damage the fuel system of an

engine while in storage. To avoid engine •

problems, the fuel system should be

emptied before storage of 30 days or

longer. Drain the fuel tank, start the •

engine and let it run until fuel lines and

carburetor are empty. Use fresh fuel next

season. See Storage Instructions for

additional information. Never use engine

or carburetor cleaner products in fuel tank

or permanent damage may occur.

ACAUTION: Fill to bottom of gas tank

filler neck. Do not overfill. Wipe off any •

spilled oil or fuel. Do not store, spill or use

gasoline near an open flame.

TO START ENGINE

•To start a cold engine, push primer five

(5) times before trying to start. Use a

firm push. This step is not usually

necessary when starting an engine

which has already run for a few

minutes.

•Hold operator presence control bar

down to the handle and pull starter

handle quickly. Do not allow starter

rope to snap back.

•To stop engine, release operator

presence control bar.

NOTE: In cooler weather it may be

necessary to repeat priming steps. In

warmer weather over priming may cause

flooding and engine will not start. If you

do flood engine, wait a few minutes

before attempting to start and do not

repeat priming steps.

Engineoilcap Gasolinefiller

cap

Under certain conditions, such as very

tall grass, it may be necessary to raise

the height of cut to reduce pushing

effort and to keep from overloading the

engine and leaving clumps of grass

clippings. It may also be necessary to

reduce ground speed and/or run the

lawn mower over the area a second

time.

For extremely heavy cutting, reduce the

width of cut by overlapping previously

cut path and mow slowly.

For better grass bagging and most

cutting conditions, the engine speed

should be set in the fast position.

For side discharge lawn mowers,

cutting in a counter-clockwise direction,

starting at the outside of the area to be

cut, spreads grass clippings more

evenly and puts less load on the

engine. To keep clippings off of

walkways, flower beds, etc., make the

first cuts in a clockwise direction.

Pores in cloth grass catchers can

become filled with dirt and dust with

use and catchers will collect less grass.

To prevent this, regularly hose catcher

off with water and let dry before using.

Keep top of engine around starter clear

and clean of grass clippings and chaff.

This will help engine air flow and

extend engine life.

MULCHING MOWINGTIPS

Im=ORTANT:Forbestpe_onnance,keep

mowerhousingfreeofbul-q) grassand

See"Cleanbg"inMAINTENANCE

seclionofttis manu_

• Thespec_nUch_ b_dewUrec_._e

grass€_aingsrnanyl_n_ andreduce

_am insize soIhatas 8wy fallontothe

lawntheywil cispe_ intothegrassand

notbe nolice_ Nso. lhe muUled grass

wab_rade q_dytopro_den_ents

for_he_Ahva_.nubh_hyour

t_ghesten_e (t_b) s_d as._swi

prov_ mebestrecut_gac_n or_he

blades.

• Avoidct,lS_yourlawnwhenitiswet Wet

grasstendstoformdurn_ andinterferes

W_llhe _acaorLThe best_11eIo

mowyourbwn isEle eadyaltemo_ At

8"4slimeb'legrasshasdded andthe newty

cutareawi notbe exposedtothe(ted

SUn.

• Forbest results,a(_ust the lawn mower

c_t_ heightsoeet_lawnmowercuts

_ _/the topone._do_U_egross

blades. #gw lawnts overgrownitwil be

necessarytoraisetheheighto_cutto

reducepushinge_o,tandtokeepfrom

_,_eenginear__g

c_umpso_nUchedgra_ For_

heavyniulchi_ reduceyourwidlhofcut

by_pre,.,iou__pathand

rnew slowly

• CedabhC_sdgrassandgrasscon(_

lionsmayreq_re thatan area be mulched

a second_to oompta(elyhideIhe

W_ _a sec_o£ mow

ac_s or peq:e_k:_ _ _ _st cut pa_

• c_e_rct_r_ _ _ week_o

week. Mow r_ to sot_ oneweek e_en

c_nge to east towest e_e next week: This

MAINTENANCE SCHEDULE

FILL IN DATES

AS YOU COMPLETE

REGULAR SERVICE SERVICE DATES

Check forLooseFasteners _ll/

Clean/InspectGrassCatcher

(IfEquipped) I_ _/

oM Clean Lawn Mower

Clean Under Drive Cover

WIPower-Propelled Mowers!I_Checkddve belt/pulleys

(Power.Propelled Mowers) V'

RCheck/Sharpe_Replace Blade (_a

LubdcationChart _!,/

Clean Sattery/Rscharge

IElectdc Start Mowers) Iw/ 1_4

E Check EngineOil Level b/'

Change EngineOil I_t.t

GCleanAir Filter I/2

I InspectMuffler i/

NCleanor Replace Spark Plug I_

E Re_aceAirFilterPaparCartridge 1_2

1-Changemoreoltenwhenoperatingunder• heavyloado(Inhighambienttempemlums,

2 °ServicemoreoftenwhenoperatingIndirtyordL_lyconditions.

3 - Replacebladesmoreoftenwh_ mowingInsandyseil.

4 - Charge48 hoursat endofseason,

GENERAL RECOMMENDATIONS

The warranty on this lawn mower does not

cover itemsthat have been subjected to

operator abuse or negligence. To receive full

value from the warranty, operator must

maintain mower as instructedin this manual.

Some adjustmentswill need to be made

pededicaily to properly maintain your unit.

All adjustments in the Service and Adjust-

rnents section of this manual should be

checked at least once each season.

• Once a year, replace the spark plug, clean

or replace air filterelement and check

blade for wear. A new spark plug and

clean/new air filter element assures proper

air-fuel mixtureand helps your engine run

better and last longer.

•Follow the maintenance schedule in this

manual.

BEFORE EACH USE

•Check engine oil level.

•Check for loosefasteners.

LUBRICATION

Keep unitwell lubricated(See "LUBRICATION

CHART").

LUBRICATION CHART

(_)Wheel adjuster (_)Mulcher door

oil (_B'rake

spdng

bracket

(X)Handle bracket

mountingpin

(_Spray lubdcante "

®Refer to MAINTINANCE "ENGINE"

SECTION.

IMPORTANT:Do notoilor greaseplastic

wheelbearings.Viscouslubricantswillattract

dustanddirtthatwillshortenthe lifeofthe

selflubricatingbearings.Ifyoufeeltheymust

be lubricated,useonlya dry,powdered

graphitetype lub,icantspa,inghy.

PRODUCT

MODEL NUMBER

SPECIFICATIONS

917.388221

SERIAL NUMBER

DATE OF PURCHASE

GASOLINE CAPACITY/TYPE: 1.5 QUARTS

UNLEADED REGULAR

OILTYPE (API-SF/SG/SH): SAE 30 (ABOVE 32°F)

SAE 5W-30 (BELOW 32°F)

OIL CAPACITY: 20 OZS.

SPARK PLUG(GAP: .030") CHAMPION RJ19LM OR J19LM

VALVECLEARANCE: INTAKE: .004 -.008

EXHAUST: .004 - .008

sOLID STATE IGNITION

AIR GAP: .0125 IN.

BLADE BOLT TORQUE: 35-40 FT. LBS.

The model and serial numbers will be found on a decal attached to the rear of the

lawn mower housing.Record both sedai number and date of purchase in space

provided above.

LAW_IMOWER NOTE: Remove the blade adapter and

check the key inside hub of blade

adapter. The key must be in good

condition to work properly. Replace

adapter if damaged.

Alwaysobservesafety ruleswhen performing

any maintenance.

TIRES

•Keeptiresfreeof gasoline,o_1,orinsect

controlchemicalswhich can harm rubber.

•Avoidstumps,stones,deep ruts,sharp

objectsand otherhazardsthatmaycause

tiredamage.

BLADECARE

For best results, mower blade must be

kept sharp. Replace bent or damaged

blades,

TO REMOVE BLADE

•Disconnectspark plug wire from spark

plug and place wire where it cannot

come in contact with spark plug.

•Tum lawn mower on its side. Make

sure air filter and carburetor are up.

•Use a wood block between blade and

mower housing to prevent blade from

tuming when removing blade bolt.

•Protectyour hands with gloves and/or

wrap blade with heavy cloth.

•Remove blade bolt by tuming counter-

ofockwise.

- Remove blade and attaching hardware

(bolt, lock washer and hardened

washer).

TO REPLACE BLADE

•Position the blade adapter on the

engine crankshaft. Be sure key in

adapter and crankshaft keyway are

aligned.

•Position blade on the blade adapter

aligning the two (2) holes in the blade

with the raised lugs on the adapter.

•Be sure thetrailing edge of blade

(opposite sharp edge) is up toward the

engine,

Install the blade bolt with the lock

washer and hardened washer into

•blade adapter and crankshaft.

•Use block of wood between blade and

lawn mower housing and tighten the

blade bolt, tuming clockwise.

•The recommended tightening torque is

35-40 ft. Ibs.

IMPORTANT: Blade bolt is grade 8 heat

treated.

Inhaltsverzeichnis

Andere Craftsman Rasenmäher Handbücher

Craftsman

Craftsman 25409 Bedienungsanleitung

Craftsman

Craftsman 917.379090 Bedienungsanleitung

Craftsman

Craftsman 25335 Bedienungsanleitung

Craftsman

Craftsman 917.379611 Bedienungsanleitung

Craftsman

Craftsman 917.286210 Bedienungsanleitung

Craftsman

Craftsman 917.378940 Bedienungsanleitung

Craftsman

Craftsman 917.388740 Bedienungsanleitung

Craftsman

Craftsman 917.276220 Bedienungsanleitung

Craftsman

Craftsman 917.376462 Bedienungsanleitung

Craftsman

Craftsman 917.271142 Bedienungsanleitung

Craftsman

Craftsman Professional 247.38109 Bedienungsanleitung

Craftsman

Craftsman 944.101781 Bedienungsanleitung

Craftsman

Craftsman 917.27086 Bedienungsanleitung

Craftsman

Craftsman 917.376690 Bedienungsanleitung

Craftsman

Craftsman 25743 Bedienungsanleitung

Craftsman

Craftsman 917.272481 Bedienungsanleitung

Craftsman

Craftsman 917.388841 Bedienungsanleitung

Craftsman

Craftsman 917.379400 Bedienungsanleitung

Craftsman

Craftsman 917.388651 Bedienungsanleitung

Craftsman

Craftsman 917.258552 Bedienungsanleitung

Craftsman

Craftsman 917.370681 Bedienungsanleitung

Craftsman

Craftsman EZ3 917.270650 Bedienungsanleitung

Craftsman

Craftsman 917.389621 Bedienungsanleitung

Craftsman

Craftsman 917.379200 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung