Craftsman 917.389520 Bedienungsanleitung

Owner's Manual

6.0 HORSEPOWER

21" REAR DISCHARGE

ROTARY LAWN MOWER

Model No,

917.389520

• Safety

• Assembly

• Operation

• Maintenance

•Espa_ol

•Repair Parts

NOTE: Engines which are certified to comply with California and U.S. EPA emission regulations

for SORE (Small Off Road Equipment), are certified to operate on regular unleaded gasoline,

and include the following emission control systems: Engine Modification (EM), and Three-way

Catalyst (TWC) (If so equipped).

AVISO: Los mofores homolegados pare eumplir con la reglamenfaci6n sobre emisiones de

Califomia y de la Agencia de Protecei6n Ambiental estedounidense (EPA) pera equipos

peque_os no circulantes (SORE) funcionan con gasolina normal sin plomo, e incluyen los

siguientes sistemas de control de emtsiones: modificaci6n del motor (EM) y catalizador de tdple

accibn (TWC) (en caso de tenet/o).

The D.O,M. decal includes engine life specifications for the emissions-related useful life pedod of

your engine. This pedod relates to the emission compliance life as certified by EPA/CARB. To

find the Ufeperiod specification for your engine, please match one of the following letters with the

letter printed on your D.O.M. decal: (C) 125 hours, (B) 250 hours. (A) 500 hours.

La calcomanfa D.O.M. incluye especiflcaciones sobm la deraci6n del motor para el perfodo de

vide ,3tilde su motor refacoionado con emisiones. Este perfodo se relaciona con la duracibn en

conformidad con las emisiones segdn Io certificedo por EPNCARB, Pare hailer la especificacibn

del per{odo de vide de su motor, mire cudl de las siguientes letras viene impresa en su

calcomanfa D,O.M.: (C) 125 horas, (B) 250 bores, (A) 500 horas.

CAUTION:

Read and follow all

Safety Rules and Instructions

before operating this equipment

Se_rs, Roebuck and CO., Hoffmar_ E_tafes, IL 60179

Visit our Craftsman website: www.sears.com/craftsman

Warranty ............................................... 2

Safety Rules ......................................... 2

Assembly .............................................. 5

Operation .............................................. 6

Maintenance Schedule ...................... 10

Maintenance ....................................... t 0

Product Specifications ........................ 11

Service and Adjustments .................... 14

Storage ............................................... 15

Troubleshooting ................................. 16

Repair Parts ........................................ 34

Parts Ordering ..................... Back Cover

LIMITEDTWOYEAR WARRANTYONCRAFTSMAN POWER MOWER

Fortwoyearsfrom dateof purchase,whenthis CraftsmanLawn Mowerismaintained,

lubricated,and tunedup accordingto the operatingand maintenanceinstructionsin

theowner'smanual,Searswillrepairfree of chargeanydefectin materialor work-

manship.

If thisCraftsmanLawnMowerisusedfor commercialor rentalpurposes,thiswarranty

applies for only90 daysfrom thedate ofpumhase.

This Warranty does not cover:

•Expendableitems whichbecomewornduringnormaluse, suchas rotarymower

blades, bladeadapters,belts, air cleanersand spark plug.

• Repairsnecessarybecauseof operatorabuse or negligence,includingbent

crankshaftsand thefailure to maintainthe equipmentaccording to the instructions

containedin the owner'smanual.

Warrantyserviceisavailableby returningthe Craftsmanpowermowertothe nearest

SearsService Center/Departmentin theUnitedStates.Thiswarrantyappliesonly

whilethisproductisin usein theUnitedStates.

This Warranty gives you specific legal rights, and you may also have other rights

which vary from state to state.

SEARS, ROEBUCK AND CO., D/817 WA, HOFFMAN ESTATES, ILLINOIS 60179

IMPORTANT: This cutting machine is capable of amputating hands and feet and

throwing objects. Failure to observe the following safety instructions could result in

serious injury or death.

I.GENERAL OPERATION

• Read, understand, and follow all

instructions on the machine and in the

manual(s) before starting. Be thor-

oughly familiar with the controls and

the proper use of the machine before

starting.

•Do not put hands or feet near or under

rotating parts. Keep clear of the

discharge opening at all times.

•Only allow responsible individuals,

who are familiar with the instructions, to

operate the machine.

•Clear the area of objects such as

rocks, toys, wire, bones, sticks, etc.,

which could be picked up and thrown

by the blade.

• Be sure the area is clear of other

people before mowing. Stop machine if

anyone enters the area.

• Do not operate the mower when

barefoot or wearing open sandals.

Always wear substantial foot wear.

•Do not pull mower backwards unless

absolutely necessary. Always look

down and behind before and while

moving backwards.

•Do not operate the mower without

proper guards, plates, grass catcher or

other safety protective devices in place.

•See manufacturer's instructions for

proper operation and installation of

accessories. Only use accessories

approved by the manufacturer.

•Stop the blade(s) when crossing gravel

ddves, walks, or roads.

• Stop the engine (motor) whenever you

leave the equipment, before cleaning

the mower or unclogging the chute.

•Shut the engine (motor) off and wait

until the blade comes to complete stop

before removing grass catcher.

•Mow only in daylight or good artificial

light.

• Do not operate the machine while

under the influence of alcohol or drugs.

• Never operate machine In wet grass.

Always be sure of your footing: keep e

firm hold on the handle and walk; never

run,

• Disengage the self-propelled mecha-

nism or drive clutch on mowers so

equipped before starting the engine

(motor).

• If the equipment should start to vibrate

abnormally, stop the engine (motor)

and check immediately for the cause,

Vibration is generally a warning of

trouble.

•Always wear safety goggles or safety

glasses with side shields when

operating mower.

n, SLOPE OPERATION

Slopes are a major factor related to slip

and fall accidents which can result in

severe injury. All slopes require extra

caution. {f you feel uneasy on aslope, do

not mow it.

DO:

• Mow across the face of slopes: never

up and down. Exemlse extreme caution

when changing direction on slopes.

•Remove obstacles such as rocks, tree

limbs, etc.

•Watch for holes, ruts, or bumps. Tall

grass can hide obstacles.

DO NOT:

•Do not tdm near drop-offs, ditches or

embankments. The operator could lose

footing or balance.

• Do not trim excessively steep slopes,

•Do not mow on wet grass. Reduced

footing could cause slipping,

IlL CHILDREN

Tragic accidents can occur if the operator

is not alert to the presence of children.

Children are often attracted to the

machine and the mowing activity. Never

assume that children will remain where

you last saw them.

• Keep children out of the trimming area

and under the watchful care of another

rssponsibte adult.

•Be alert and turn machine off if children

enter the area.

•Before and while walking backwards,

took behind and down for small

children.

•Never allow children to operate the

machine,

•Use extra care when approaching blind

comers, shrubs, trees, or other objects

that may obscure vision.

IV. SERVICE

•Use extra care in handling gasoline

end other fuels. They are flammable

and vapors are explosive.

-Use only an approved container.

- Never remove gas cap or add fuel

with the engine running. Allow

engine to cool before refueling. Do

not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel

container inside where there is an

open flame, such as a water heater.

• Never run a machine inside aclosed

area.

• Never make adjustments or repairs with

the engine (motor) running. Disconnect

the spark plug wire, and keep the wire

away from the plug to prevent acciden-

tal starting.

•Keep nuts and bolts, especially blade

attachment bolts, tight and keep

equipment in good condition.

• Never tamper with safety devices,

Check their proper operation regularly.

• Keep machine free of grass, leaves, or

other debds build-up, Clean oil or fuel

spillage. Allow machine to cool before

stodng.

• Stop and inspect the equipment if you

strike an object. Repair, if necessary,

before restarting,

• Never attempt to make wheel height

adjustments while the engine (motor) is

running.

•Grass catcher components are subject

to wear, damage, and deterioration,

which could expose moving parts or

allow _jects to be thrown. Frequently

check components and replace with

manufacturer's recommended parts,

when necessary.

•Mower blades are sharp and can cut.

Wrap the blade(s) or wear gloves, and

use extra caution when servicing them.

• Do not change the engine governor

setting or overspeed the engine.

_,Look for this symbol to point out

important safety precautions. It means

CAUTION!!! BECOMEALERT!!! YOUR

SAFETY IS INVOLVED.

ACAUTION: In order to prevent

accidental starting when setting up,

transporting, adjusting or making repairs,

always disconnect spark plug wire and

place wire where it cannot contact spark

plug.

CAUTION: Muffler and other engine

parts become extremely hot during

operation and remain hot after engine

has stopped. To avoid severe burns on

contact, stay away from these areas.

AWARNING: Engine exhaust, some of its

constituents, and certain vehicle

components contain or emit chemicals

known to the State of California to cause

cancer and birth defects or other

reproductive harm.

AWARNING: Battery posts, terminals and

related accessories contain lead and lead

compounds, chemicals known to the State

of Catifcmia to cause cancer and birth

defects or other reproductive harm. Wash

hands after handling,

These accessorieswere availal_e when thislawn mowerwas produced. They are not

shipped with your mower. They are also availableat most Sears re_il outletsand service

centers. Most Sears storescanalso order repairpartsfor you, when you providethe model

number of your lawn mower. Some of these accessoriesmay not applyto your lawn mower.

LAWN MOWER PERFORMANCE

CLIPPING DEFLECTOR

FOR REAR DISCHARGE LAWN MOWERS MULCHER KITS STABIL;_ER

REAR DISCHARGE I SIDE DISCHARGE

LAWN MOWERS LAWN MOWERS

GAS CANS

LAWN MOWER MAINTENANCE

MUFFLERS AIR FILTERS SPARK PLUGS

BELTS BLADES BLADE ADAPTERS WHEELS ENGINE OIL

Read these instructions and this manual

in its entirety before you attempt to

assemble or operate your new lawn

mower.

IMPORTANT: This lawn mower is

shipped WITHOUT OIL OR GASOLINE in

the engine.

Your new lawn mower has been as-

sembled at the factory with the exception

of those parts teft unassemb|ed for

shipping purposes. All parts such as nuts,

washers, bolts, etc., necessary to com-

plete the assembly have been placed in

the parts bag. To ensure safe and proper

operation of your lawn mower, all parts

and hardware you assembte must be

tightened securely. Use the correct tools

as necessary to ensure proper tightness.

TO REMOVE LAWN MOWER FROM

CARTON

1. Remove loose parts included with

mower.

2. Cut down two end corners of carton

and lay end panel down flat.

3. Remove all packing matedals except

padding between upper and lower

handle and padding holding operator

presence control bar to upper handle.

4. Roll lawn mower out of carton and

check carton thoreugly for additional

loose pads.

HOWTO SET UPYOUR LAWN

MOWER

TO UNFOLD HANDLE

IMPORTANT: Unfold handle carefully so

as not to pinch or damage control cables.

1. Raise lower handle section to

operating position and squeeze the

bottom ends of lower handle towards

each other until the pin in handle can

be inserted into one of the three

height adiustment hotes.

2. Remove protective padding, raise

upper handle section into place on

lower handle and tighten both handle

knobs.

3. Remove any packing material from

around control bar.

Your handles may be adjusted for your

mowing comfort. Refer to Service and

Adjustments section of this manual.

Operator

controlbar

Upper

Lift up

Mowing

Handle

Lower handle

3-Position

handle

'adjustment

bracket

KNOWYOUR LAWN MOWER

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR

LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself

with the location of various controls and adjustments. Save this manual for future

reference.

These symbols may appear on your lawn mower or in literature supplied with the

product. Learn arid understand their meaning.

CAUTION ENGINE ENGINE FAST SLOW CHOKE FUEL OIL DANGER, KEEP HANDS

OR WARNING ON OFF AND FEET AWAy

Operator presence controlbar

Engine zone control cable

Starter

Handle knob

Engineoil capwithdipstick Gasoline filler cap

Wheael adjuster

IMPORTANT: This lawn mower is (on each wheel)

shipped without oil or gasoline in the

engine.

MEETS CPSC SAFETY REQUIREMENTS

Sears rotary walk-behind power lawn mowers conform to the safety standards of the

American National Standards Institute and the U.S. Consumer Product Safety Commis-

sion. The blade turns when the engine is running.

Operator presence control bar - must be Primer - pumps additional fuel from the

held down to the handle to start the carburetor to the cylinder for use when

engine. Release to stop the engine, starting a cold engine.

Starter handle -used for starting the

engine.

The operation of any lawn

mower can result in

foreign objects thrown into

the eyes, which can result

in severe eye damage.

Always wear safety glasses or eye

shields while operating your lawn mower

or performing any adjustments or repairs.

We recommend a wide vision safety

mask over spectacles or standard safety

glasses.

HOWTO USEYOUR LAWN MOWER

ENGINE SPEED

The engine speed was set at the factory

for optimum performance. Speed is not

adjustable.

ENGINE ZONE CONTROL

_CAUTION: Federal regulations require

an engine control to be installed on this

lawn mower in order to minimize the risk

of blade contact injury. Do not under any

circumstances attempt to defeat the

function of the operator control. The blade

turns when the engine is running.

•Your lawn mower is equipped with an

operator presence control bar which

requires the operator to be positioned

behind the lawn mower handle to start

and operate the lawn mower.

TO ADJUST CuI"rlNG HEIGHT

Raise wheels for low cut and lower

wheels for high cut, adjust cutting height

to suit your requirements, Medium

position is best for most lawns,

•To change cutting height, squeeze

adjuster lever toward wheel. Move

wheel up or down to suit your require-

ments. Be sure all wheels are in the

same setting.

NOTE: Adjuster is propedy positioned

when plate tab inserts into hole in lever.

Also, 9-position adjusters (if so equipped)

allow lever to be positioned between the

plate tabs. PlateTab

LowerWheelsforHigh Cutr...,,t _,_

RaiseWheels forLow Cut

TO CONVERT MOWER

Yourlawn mowerwas shipf:_l ready to be

usedas a mulcher. Toconvertto bagging:

REAR BAGGING

•Liftrear doorofthe lawnmower and place

the grasscatcher frame hooksontothe

doorpivotpins.

•To convertto mulchingoperation,remove

grass catcher and _reardoor.

_,CAUTION: Do not run your lawn mower

withou! clipping deflector or approved

grass.catcher in place. Never attempt to

operate the lawn mower with the rear

door removed or propped open.

Pivot pins Grass catcher

:.'handle

Catcher frame hook •

TOE.P GRASSCATCHER

1. Lift up on grass catcher using the

frame handle,

2. Remove grass catcher with clippings

from under lawn mower handle.

3, Empty clippings from bag using both

frame handle and bag handle.

NOTE: Do not drag the bag when

emptying; it will cause unnecessary wear.

Grass

catcher

handle

Bag

handle

BEFORE STARTING ENGINE

ADD OIL

Your lawnmower is shipped without oil in

the engine. Engine holds 20 oz. o! oil.

For type and grade of oilto use, see

"ENGINE" in Maintenance section of this

manual.

1. Be sure lawnrnowsr is level and area

around oil fill is clean.

2. Remove engine oil cap and fill to the

full line on the dipstick. Pour oil

slowly. Do not over fill.

NOTE: Allow oil to settle down into

engine for accurate reading. To read

proper level, tighten engine oil cap, then

remove it to read the dipstick.

3. Reinstall engine oil cap and tighten.

•Check og level before each use. Add

oil if needed. Fill to full line on dipstick.

• Change the oil after every 25 hours of

operation or each season. You may

need to change the oil more often

under dusty, dirty conditions.

ADD GASOLINE

•Fill fuel tank. Use fresh, clean, regular

unleaded gasoline with a minimum of

87 octane. Do not mix oil with gaso-

line. Purchase fuel in quantities that

can be used within 30 days to assure

fuel freshness.

AWARNING: Experience indicates that

alcohol blended fuels (called gssohol or

using ethanol or methanol) can attract

moisture which leads to separation and

formation of acids during storage. Acidic

gas can damage the fuel system of an

engine while in storage. To avoid engine

problems, the fuel system should be

emptied before storage of 30 days or

longer. Drain the gas tank, start the

engine and let it run until the fuel lines

and carburetor are empty. Use fresh fuel

next season. See Storage Instructions for

additional information. Never use engine

or carburetor cleaner products in the fuel

tank or permanent damage may occur.

CAUTION: Fill to bottom of gas tank

filler neck. Do not overfill. Wipe off any

spilled oil or fuel. Do not store, spill or

use gasoline near an open flame.

Engineoilcap Gasolinefiller

cap

,/b

TO START ENGINE

NOTE: Due to protective coatings on the

engine, a small amount of smoke may be

present dudng the initia_use of the

product and should be considered

normal.

1. To start a cold engine, push primer

three (3) times before trying to start.

Use e firm push. This step is not

usually necessary when starting an

engine which has already run for a

few minutes.

2. Hold operator presence control bar

down to the handle and pull starter

handle quickly. Do not allow starter

rope to snap back.

TO STOP ENGINE

•To stop engine, release operator

presence control bar.

NOTE: In cooler weather it maybe

necessary to repeat pdming steps. In

warmer weather over priming may cause

flooding and engine will not start. If you

do flood engine, wait a few minutes

before attempting to start and do not

repeat priming steps.

MOWINGTIPS

• Under certain conditions, such as very

tall grass, it may be necessary to raise

the height of cut to reduce pushing

effort and to keep from ovedoadmg the

engine and leaving clumps of grass

clippings. It may also be necessary to

reduce ground speed and/or run the

lawn mower over the area a second

time.

•For extremely heavy cutting, reduce the

width of cut by overlapping previously

cut path and mow slowly

• For better grass bagging and most

cutting conditions, the engine speed

should be set in the fast posit=on.

•For side discharge lawn mowers,

cutting in a counter-clockwise direction,

starting at the outside of the area to be

cut, spreads grass clippings more

evenly and puts less load on the

engine. To keep chppmgs off of

walkways, flower beds, etc, make the

first cuts in aclockwise direction.

•Pores in cloth grass catchers can

become filJedwith dirt and dust wtth

use and catchers will collect less grass.

To prevent this, regulady hose catcher

off with water and let dry before using.

• Keep top of engine around starter clear

and clean of grass clippings and chaff.

This will help engine a_rflow and

extend engine life.

MULCHING MOWINGTIPS

IMPORTANT: For best performance,

keep mower housing free of budt-up

grass and trash. See "Cleaning" in

MAINTENANCE sect=on of this manual.

•The special mulching blade will recut

the grass clippings many times and

reduce them in size so that as they fall

onto the lawn they will disperse into the

grass and not be noticed, Also, the

mulched grass will biodegrade qurckly

to provide nutrients for the lawn.

Always mulch with your highest engine

(blade) speed as this will provide the

best recuttmg action of the blades.

•Avoid cutting your lawn when it ISwet,

Wet grass tends to form clumps and

interferes with the mulching action, The

best time to mow your lawn is the early

afternoon. At th_sttme the grass has

dned and the newly cut area will not be

exposed to the d_rectsun

•For best results, adJustthe lawn mower

cutting height so that the lawn mower

cuts off only the top one-third of the

grass blades If the lawn ts overgrown it

will be necessary to raise the height of

cut to reduce pushing effort and to keep

from overloading the engine and

leavrng clumps of mulched grass For

extremely heavy mulching, reduce your

width of cut by overlapping previously

cut path and mow slowly.

•Certain types of grass and grass

conditions may require that an area be

muJched a second time to completely

hide the clippings, When doing a

second cut, mow across or perpendicu-

lar to the first cut path.

•Change your cutting pattern from week

to week, Mow north to south one week

then change to east to west the next

week. This will help prevent matting

and gremmg of the lawn,

, ,;

Check for Loose Fasteners _I_

CleaNInspect Grass Catcher

MJ(If Equipped) I1_ I_*

Clean Lawn Mower ll_ ¥'

O Clean Under Ddve Cover

(Power-Propelled Mowers)

Check ddve beWpulleys

RE Power-Propelled Mowers) ¥#

Check!Sharpen/Replace Blade _:=

LubricationChart I/ t/

Clean Sattery/Rechar_

•Electd¢ Start Mowers _ _4

ECheck En_lineOilLevel

N Chan_e Engine Oil _1,2

Clean Air Filter I_ =

NJ Inspect Muffler _'

Clean or Replace Spark Plug I_'

E ReplaceAirFilterPaperCartridge 11_2

1 . Change more O1_0n when opea_ng under a h_ W _or in high ambient lemperatutes

2 - $et,t_ce more often when operating in dldy ot dus_y ¢onditmn_

3-Rep_a_ b_s mote of_n wl_e mowing in =andy soil,

4. Charge 48 hours at end of sealon.

GENERAL RECOMMENDATIONS

The warranty on this lawn mower does

not cover items that have been subjected

to operator abuse or negligence. To

receive full value from the warranty,

operator must maintain mower as

instructed in this manual.

Some adjustments will need to be made

periodically to propedy maintain your

unit.

All adjustments in the Service and

Adjustments section of this manual

should be checked at least once each

season•

• Once a year, replace the spark plug,

clean or replace air filter element and

check blade for wear. A new spark

plug and clean/new air filter element

assures proper air-fuel mixture and

helps your engine run better and last

longer.

•Follow the maintenance schedule in

this manual.

BEFORE EACH USE

1. Check engine oil level.

2. Check for loose fasteners.

LUBRICATION

Keep unit well lubricated (See "LUBRi-

CATiON CHART").

LUBRICATION CHART

(_Nheel adjuster

oil spring

bracket

mountingpin

(_ Refer to maintenance "Engine" section.

Spray lubricant

IMPORTANT: Do not oil or grease

plastic wheel beadngs, viscous lubri-

cants will attract dust and dirt that will

shorten the life of the self-lubricating

beadngs, if you feel they must be

lubricated, use only a dry, powdered

graphite type lubricant sparingly,

Inhaltsverzeichnis

Andere Craftsman Rasenmäher Handbücher

Craftsman

Craftsman 917.270671 Bedienungsanleitung

Craftsman

Craftsman 917.370560 Bedienungsanleitung

Craftsman

Craftsman 917.275044 Bedienungsanleitung

Craftsman

Craftsman 917.272674 Bedienungsanleitung

Craftsman

Craftsman 917.272200 Bedienungsanleitung

Craftsman

Craftsman 917.371033 Bedienungsanleitung

Craftsman

Craftsman 917.288461 Bedienungsanleitung

Craftsman

Craftsman 917.377170 Bedienungsanleitung

Craftsman

Craftsman 917.25024 Bedienungsanleitung

Craftsman

Craftsman 917.273634 Bedienungsanleitung

Craftsman

Craftsman 917.376480 Bedienungsanleitung

Craftsman

Craftsman 944.364701 Bedienungsanleitung

Craftsman

Craftsman EZ3 917.258591 Bedienungsanleitung

Craftsman

Craftsman 917.378380 Bedienungsanleitung

Craftsman

Craftsman 917.388190 Bedienungsanleitung

Craftsman

Craftsman 917.378421 Bedienungsanleitung

Craftsman

Craftsman 247.20400 series Bedienungsanleitung

Craftsman

Craftsman 917.379590 Bedienungsanleitung

Craftsman

Craftsman 917.275013 Bedienungsanleitung

Craftsman

Craftsman 917.374552 Bedienungsanleitung

Craftsman

Craftsman 917.273140 Bedienungsanleitung

Craftsman

Craftsman 917.376460 Bedienungsanleitung

Craftsman

Craftsman 917.273664 Bedienungsanleitung

Craftsman

Craftsman CTX 9500 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung