Craftsman Workbench Bedienungsanleitung

OPERATOR'S MANUAL

WORKBENCH

"'::ii i

CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.

Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA. F1507

AND CAUTIONS:

Use appropriate safety equipment when using power and hand tools. Failure to do so may cause personal injury or product damage.

Use adequate manpower when assembling and moving this unit. Failure to do so may cause personal injury or product damage.

DO NOT stand on this product. You may fail which may cause personal injury.

DO NOT mount this product on a truck bed or any other moving object. This may cause personal injury or product damage.

Appropriately secure this product before moving it with a forklift.

DO NOT tow with power equipment. The product could tip, which may cause personal injury or product damage.

DO NOT alter this product in any manner. For example, do not weld external {ockbars or attach electrical equipment. This may cause

product damage or personal injury.

Keep the product on level surfaces. The product may become unstable and tip if stored or moved on an undevel surface, which may cause

personal injury or product damage.

BE CAREFUL when opening more than one drawer. The product may become unstable and tip, which may cause personal injury or

product damage.

DO NOT step in the drawers. You may fall which may cause personal injury.

The maximum weight for each drawer should be no more than 35 pounds.

Maximum combined weight limit not to exceed 1,450 pounds, tfthe limit is exceeded, the product could collapse and cause personal injury

or product damage. J

Tools Required: Hardware Included:

3/8" Wrench

7/16" Wrench

11/32" Wrench

Drill

I/8" Drill bit

Screwdriver, Phillips

Screwdriver, Flathead

AA (32) EE (32)

Separate

Bag BB (44) FF (32)

/i CC (28) GG (28)

DD(6)

(Call 1-800-4MY-HOME (1-800-469-4663) for Service Parts. Refer to Service Parts Drawing for full listing of Service Parts. )

G (4)

E (14)

A (4) B(4)

C (4)

D (7)

AA(32)

BB(16)

' EE (32)

FF (32)

Attach B to A using BB.

Wrench tighten. (Do not overtighten).

B,(4) .A(4)

Assemble A(2) and C(4).

Repeat using A(2) and G(4).

EE\\

A(2) "XC (4)

Finger tighten. (Do not wrench tighten until step 3).

BB (28)

CC (28)

GG (28)

Separate slide parts. (See drawer removal instructions).

Attach (2) Ed to each D.

Release D(7)

cc .......GG

Ed (14)

Wrench tighten.

STEP 2 Continued

Attach Eu(14) to unit. Eu(14)

NOTE: Drawers may be organized in several configurations,

below is the slide positioning for the recommended drawer

configuration.

i,i ¸ , ......... :._

i,',l iiL .......... _i

' i=r iij ::::::::: :

,;[_ ,; o,o

il n::i n

: iit

: i:i t

_STEP 3

Insert the drawer slides (Ed) into the workbench slides (Eu)

and push all of the way to the back.

Pull the drawer open until it stops to ensure proper

assembly.

Repeat for remaining drawers.

Carefullyalignslidesand

slowlypushdrawerinto

unituntildrawerstops.

Square the unit and adjust for optimum drawer

performance.

Wrench tighten (32) fasteners from step1 to 40-50 in/ibs

(finger tighten and approximately 1/2 wrench turn).

Remove drawers. (See drawer removal instructions).

STEP 4

Note: Avoid placing frames too close to each other.

Position frames and F as desired.

Mark centers of (6) square mounting holes.

Square

Mounting.

Hole

Turn F over. (Use packaging material to avoid scratching).

Drill (6) 1/8" pilot holes 1/2" deep.

STEP 4 -Continued

DD (6)

Reposition F on unit.

DD (6)

Attach using DD (6).

Reinstall drawers. (See drawer installation instructions).

REMOVING AND INSTALLING DRAWERS:

Empty the drawer.

Fully extend the drawer.

Release _/

Lever style- Lift or lower (depending on the sflde) the

release lever on both sides and pull drawer out to |

remove. /Tab style- Depress the release tabs on both sides and

putl drawer out to remove. |

To reinstall, carefully align the slides and push the |

drawer into the unit until the drawer stops. ,|J

f. Lubricate the slides with grease or equivalent, (twice

yearly).

Periodically the drawer fronts, drawer trim, and other

surfaces should be cleaned with a mild detergent and wat

Auto wax will preserve the unit's luster finish. Apply the wax

as to a car. The wax will also help protect the unit against

scratches.

Grease and oil can be removed with most standard

cleaning fluids. For safety, use a nonflammable cleaning

fluid. .)

MANUAL DE USUARIO

BANCO DE TRABAJO

ATENClON: Lea y slga todas las Normas de Seguridad y las Instrucciones de Funcionamiento antes de

utilizar por primera vez este producto.

Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA. F1507

Ufilice un equipo de seguridad apropiado cuando use herramientas electricas y manuales. De Io contrario podria ocasionarse lesiones

personales o daSar el producto.

Ufitice el personal adecuado para el montaje y el traslado de esta unidad. De Io contrario podria ocasionarse lesiones personales o dar_ar

el producto.

NO se ponga de pie encima de este producto. Podria caerse y causarse lesiones personaies.

NO monte este producto en {a piataforma de un camion ni en ningun objeto en movimiento. Esto podria causade lesiones personales o

daSar el producto.

Asegure de forma adecuada este producto antes de moverto con una carretilta elevadora.

NO to remoique con equipo electrico. El producto podria volcar to que podria causarle tesiones personales o dar_ar el producto.

NO altere este producto de modo alguno. Esto podria dar_arel producto o causarle tesiones personales.

Mantenga el producto sobre superficies pianas. El producto puede desestabilizarse y voicar si se atmacena o se mueve en superficies no

lianas, Io cuai podria causar lesiones personales o daSar el producto.

TENGA CUIDADO aI abrir mas de un caj6n. El producto podria desestabilizarse y voicar Io que podria causade lesiones personales o

daSar el producto.

NO se ponga de pie encima de los cajones. Podria caerse y causarse lesiones graves.

El peso maximo en cada gaveta no debe ser mayor de 35 libras.

El peso maximo combinado no debe exceder a las 1,450 libras. Si se excede este limite, el producto podria derrumbarse y causar lesiones

_, personales o da_ar el producto. J

Herramientas necasarias: Ferreteria incluida:

Llave tnglesa de 3/8"

Llave ingtesa de 7/16"

Llave tnglesa de 11/32"

Talladro

Broca de 1/8 de pulgada

Destornillador Phiiips

Destornillador

de cabeza plana Bolsa

Separada BB (44)

EE (32)

FF (32)

CC (28) GG (28)

DD (6)

Llame al 1-800-659-7084 para Piezas de Servicio. Consulte el dibujo de piezas de servicio si desea un listado complete de piezas de servicio.)

," >' ,, •

G(4)

E (14)

A (4) B (4)

C (4)

D(7)

AA (32)

FF (32)

Coloque Ben A usando BB.

Ajuste con la Ilave. (No apriete demasiado).

B(4) - _A(4)

Colocar A(2) yC(4).

Repetir el mismo procedimiento utitizandoA (2) y G (4).

FF \\\ \\

A (2) _ c(4)

Apriete a mano. (No apriete con llave hasta el paso 3). k.

BB(28)

CC (28)

GG (28)

Separe las piezas de las guias. (Veanse las instrucciones

para retirar las gavetas).

Coloque (2) Eden cada D.

Liberacibn D(7)

/..... -_ ...... GG

Ed (14)

Ajuste con {a Ilave.

Andere Handbücher für Workbench

Inhaltsverzeichnis

Sprachen:

Andere Craftsman Werkzeugaufbewahrung Handbücher

Craftsman

Craftsman 706.153410 Bedienungsanleitung

Craftsman

Craftsman 706.599300 Leitfaden

Craftsman

Craftsman PROFESSIONAL SERIES Bedienungsanleitung

Craftsman

Craftsman 706.657840 Bedienungsanleitung

Craftsman

Craftsman GARAGE STORAGE SOLUTIONS Bedienungsanleitung

Craftsman

Craftsman F1726 Bedienungsanleitung

Craftsman

Craftsman 76637 Bedienungsanleitung

Craftsman

Craftsman Workbench Bedienungsanleitung

Craftsman

Craftsman GARAGE STORAGE SOLUTIONS Bedienungsanleitung

Craftsman

Craftsman PROFESSIONAL SERIES Bedienungsanleitung

Craftsman

Craftsman 695.65857 Bedienungsanleitung

Craftsman

Craftsman Professional Series Chests and Roller... Bedienungsanleitung

Craftsman

Craftsman 706.591870 Bedienungsanleitung

Craftsman

Craftsman 14927 Bedienungsanleitung

Craftsman

Craftsman CORNER SHELVING UNIT Bedienungsanleitung

Craftsman

Craftsman STATIONARY STORAGE UNIT Bedienungsanleitung

Craftsman

Craftsman 31018 Bedienungsanleitung

Craftsman

Craftsman 351.221050 Bedienungsanleitung

Craftsman

Craftsman CMXQCHS36B Bedienungsanleitung

Craftsman

Craftsman F1725 Bedienungsanleitung

Craftsman

Craftsman F1294 Bedienungsanleitung

Craftsman

Craftsman AXS 706.59668 Bedienungsanleitung

Craftsman

Craftsman 706.139920 Bedienungsanleitung

Craftsman

Craftsman BALL BEARING SERIES Bedienungsanleitung

Beliebte Werkzeugaufbewahrung Handbücher anderer Marken

Ryobi

Ryobi RWB03 Bedienungsanleitung

Husky

Husky H27CH5TR4BGK Bedienungsanleitung

Scheppach

Scheppach ts 2100 Bedienungsanleitung

Cornwell Tools

Cornwell Tools CTB360AKBK Bedienungsanleitung

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Bedienungsanleitung

Cassese

Cassese CS200 CART Bedienungsanleitung

Kendall Howard

Kendall Howard ESDW-9630-1000 Bedienungsanleitung

Lista

Lista Align Montageanleitung

Workzone

Workzone 99609 Bedienungsanleitung

Stanley

Stanley STST83800-1 Bedienungsanleitung

Homak

Homak PROFESSIONAL Series Systemhandbuch

Perel

Perel ROLLER SHUTTER STORAGE CABINET Bedienungsanleitung

Husky

Husky H5CH2R Bedienungsanleitung

BGS technic

BGS technic 4107 Bedienungsanleitung

Clarke

Clarke CWB1250 Bedienungsanleitung

Ryobi

Ryobi RWB02 Bedienungsanleitung

Husky

Husky H52CH6HDV3WHT Bedienungsanleitung

Sealey

Sealey PTB66004 Bedienungsanleitung