Creality CR-10 Series Bedienungsanleitung

3D Printer CR-10

User Manual • Uživatelský manuál •

Užívateľský manuál • Használati utasítás •

Benutzerhandbuch

English

3 –20

Čeština

21 –38

Slovenčina

39 –56

Magyar

57 –75

Deutsch

76 –94

Dear customer,

Thank you for purchasing our product. Please read the following instructions carefully

before first use and keep this user manual for future reference. Pay particular attention

to the safety instructions. If you have any questions or comments about the device,

please contact the customer line.

✉www.alza.co.uk/kontakt

✆+44 (0)203 514 4411

Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Dear consumers,

Thank you for choosing our products. For the best experience, please read the

instructions before operating the Printer. Our teams will always be ready to render you

the best services. Please contact us via the phone number or e-mail address provided at

the end when you encounter any problem with the printer. For a better experience in

using our product, you can also learn how to use the printer in the following ways:

1) View the accompanied instructions and videos in the storage card.

2) Visit our official website www.creality.com to find relevant software/hardware

information, contact details, operation, and maintenance instructions.

Firmware upgrade

Please login the official website https://www.creality.com/download, switch the language

and select the relevant printer and model and download the required firmware.

Notes

1) Do not use the printer any way other than described herein to avoid personal injury

or property damage.

2) Do not place the printer near any heat source or flammable or explosive objects.

We suggest placing it in a well-ventilated, low-dust environment.

3) Do not expose the printer to violent vibration or any unstable environment, as this

may cause poor print quality.

4) Please use recommended resin to in case damage of machine.

5) Do not use any other power cable except the one supplied. Always use a grounded

three-prong power outlet.

6) Please do not open the plastic cover during usage, otherwise the printing will

be interrupted.

7) Do not wear cotton gloves when operating the printer. Such cloths may become tangled

in the printers moving parts leading to burns, possible bodily injury, or printer damage.

8) Please wait a moment after the print is finished. And please wear gloves to take out

the print by tools.

9) Clean the printer frequently. Always turn the power off when cleaning, and wipe with a

dry cloth to remove dust, adhered printing plastics or any other material off the frame,

guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface.

10)Children under 10 years should not use the printer without supervision.

11)This machine is equipped with a security protection mechanism. Do not manually

move the nozzle and printing platform mechanism manually while booting up,

otherwise the device will automatically power off for safety.

12)Users should comply with the laws and regulations of the corresponding

countries and regions where the equipment is located (used), abide by

professional ethics, pay attention to safety obligations, and strictly prohibit the use

of our products or equipment for any illegal purposes. Creality will not be

responsible for any violators' legal liability under any circumstances.

Introduction

Z Gantry frame

Platform

Extruder (E)

stepper

Nozzle kit

Filament holder

X limit switch

TF slot and USB port

Control box

X stepper

Display screen

Nozzle assembly

connection

Z stepper

Control knob

Z limit switch

Voltage selection

Platform connection

Y limit switch

Base frame

Power cable

connection

Y stepper

Equipment parameters

Basic parameters:

Model

CR-10

CR-10S

CR-10 S4

CR-10 S5

CR-10mini

Printing size

300x300x

400 mm

300x400x

400 mm

400x400x

400 mm

500x500x

500 mm

300x220x

300 mm

Moulding tech.

FDM

Nozzle number

Slice thickness

0,1 mm-0,4 mm

Nozzle

diameter

Standard 0,4 mm

Precision

±0,1 mm

Filament

1,75 mm PLA

File format

STL/OBJ/AMF

Working mode

Online or TF card offline

Slice software

Creality Slicer/Cura/Repetier-Host/Simplify3D

Power supply

Input: AC 115 V/230 V 50/60 Hz, Output: DC 12 V

Total power

270 W

Bed temp.

≤100˚C

≤60˚C

≤100˚C

Nozzle temp.

≤250˚C

Resume print

Yes

Filament

detector

Yes

Dual Z-Axis

Yes

Language

selection

EN/CN

Operating

system

Windows XP/Vista/7/8/10 MAC/Linux

Printing speed

≤180 mm/s, Normal 30-60 mm/s

General list

Toolbox

Control box

Base frame

Century frame

Tool list:

No.

Image

Name

Quantity

Spool & Nuts

Spool Holder

TF Card & Card Reader

T-Bracket (Right)

T-Bracket & Z Limit Switch (Left)

M5X25 Bolt & Lock Washer

Power Cable

USB Cable

PTFE Tubing (spare part)

Nozzle Cleaner

Filament (200 g)

Diagonal Pliers

Spade

Cable Ties

Hex keys, Wrench & Screwdriver

Spare Parts

Decorative Strip

Thumb Screw

Tips: The above accessories are for reference only, please refer to the physical accessories!

*CR- 10 mini without T- Bracket (Right) & Decoration Strip.

Device installation

Install the Gantry Frame

Install the T- shaped fixing block

Note: Make sure that the nut for profile has been turned

by 90° before fastening the T- shaped fixing block.

*CR- 10 mini without T- Bracket (right).

Connect the Stepper Motors according to

the yellow labels on the 6pin (4- wire) side.

Connect the Limit Switches according to the

yellow labels on the 3pin (2- wire) side.

1) Select the correct input voltage to match

your local mains (230 V or 115 V).

2) Damage can occur if voltage is set

incorrectly.

3) Make sure the power cable is connected.

Connect the aviation connectors to the

ports with corresponding pins.

M5X25 4pcs

Install the Rack

Install decoration strip

Install decoration belt into the

notch, starting from one end.

Cut off the excess material

with the diagonal pliers.

Attach the Decorative Trim to all

parts needing to be decorated.

*The decoration Strip is available in various colours. The pictures above are for

reference only. *CR- 10mini without Decoration Strip.

Y Stepper and Limit Switch

Extruder (E) Stepper

X Stepper and Limit Switch

Z Stepper and Limit Switch

Attach the Bracket with

two thumb screws

Attach Spool Holder

with included Nuts

Finished

Screen information

Screen Options

Sub Menu

Explanation

Info Screen

Main

Return

Prepare→

Disable Steppers

Moving X Y Z axis by your hands

Auto Home

Return to the origin

Preheat PLA

Preheat ABS

Cooldown

Close and cooldown the Nozzle

Move Axis

Moving X Y Z axis or Extruder by given value

Control→

Temperature

Heat the nozzle and the bed or change fan

speed by given value

Restore Failsafe

Restore factory setting

No card/Print from SD

Select the printing model

Init. SD-Card/Change SD-

Card

Download or update the memory card information

Printing

Tune→

Speed

Change Printing Speed by given value

Nozzle

Change the temperature by given value

Bed

Change the temperature by given value

Fan Speed

Change Fan Speed by given value

Flow

Change filament flow by given value

Pause Print

Stop Print

Print Speed

Device Model

Push: OK/Enter Sub Menu

Turn: Change Option/Value

Set Temperature of the Nozzle

Current Temperature of the Nozzle

Set Temperature of the Hot Bed

Current Temperature of the Hot Bed

Part Cooling Fan Speed

Current Location of the Nozzle

Print Time

Print Progress

Prompt Message

Andere Handbücher für CR-10 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Creality 3D-Drucker Handbücher

Creality

Creality CR-10 Max Bedienungsanleitung

Creality

Creality Ender-3 V3 KE Bedienungsanleitung

Creality

Creality HALOT-ONE PRO Bedienungsanleitung

Creality

Creality Ender-3 Bedienungsanleitung

Creality

Creality BLTouch Bedienungsanleitung

Creality

Creality CR-10 Smart Bedienungsanleitung

Creality

Creality HALOT-ONE PRO Bedienungsanleitung

Creality

Creality HALOT-LITE Bedienungsanleitung

Creality

Creality Ender-3 Bedienungsanleitung

Creality

Creality HALOT-ONE Bedienungsanleitung

Creality

Creality ENDER-3 V2 Bedienungsanleitung

Creality

Creality Ender-5 Plus Bedienungsanleitung

Creality

Creality CREALITY BOX Bedienungsanleitung

Creality

Creality CR-10 Smart Bedienungsanleitung

Creality

Creality CR-10 Series Bedienungsanleitung

Creality

Creality Ender-3 S1 Bedienungsanleitung

Creality

Creality CR-Scan Ferret 3D Pro Bedienungsanleitung

Creality

Creality CR-6 SE Bedienungsanleitung

Creality

Creality Ender 3 Pro Bedienungsanleitung

Creality

Creality CR-M4 Bedienungsanleitung

Creality

Creality CR-10 V3 Bedienungsanleitung

Creality

Creality HALOT-LITE Bedienungsanleitung

Creality

Creality Ender-5 Handbuch

Creality

Creality Ender-6 Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch