Creality CR-10 Series Bedienungsanleitung
CR- 10 Series 3D Printer User Manual
The User Manual is for the CR- 10 Series of 3D printers. It is also
applicable for the C R- 10S/C R- 10 S4/C R- 10 S5.
But CR- 10 mini without T- Bracket (Right) & Decoration Strip.
Due to the different types of devices ,Hardware and software upgrade. the
devices have little different, it is normal phenomenon. Subject to actual
device received.
Detailed instructions for using are available in the TF card.
V.6.2
Parameters
B
asic Parameters
Model CR- 10 CR- 10S CR- 10 S4 CR- 10 S5 CR- 10mini
Printing Size 300*300*400mm 300*300*400mm 400*400*400mm 500*500*500mm 300*220*300mm
Molding Tech. FDM
Nozzle Number 1
Slice Thickness 0.1mm- 0.4mm
Nozzle Diameter Standard 0.4mm
Precision ±0.1mm
Fliament 1.75mm PLA
File Format STL/OBJ/ AMF
Working Mode Online or TF card offline
Slice Software Creality Slicer/Cura/ Repetier- Host/Simplify3D
Power Supply Input:AC 115V/ 230V 50/60Hz
Output:DC 12V
Total Power 270W 270W 250W 270W 270W
Bed Temp. ≤100℃ ≤100℃ ≤60℃ ≤60℃ ≤100℃
Nozzle Temp. ≤250℃
Resume Print NO Yes Yes Yes Yes
Filament Detector NO Yes Yes Yes NO
Daul Z- Axis NO Yes Yes Yes NO
language Selection NO EN/CN
Operating System Windows XP/ Vista/ / 7/ 8/ 10 MAC/Linux
Printing Speed ≤180mm/ s，Normal 30- 60mm/s
CONTENTS
Dear consumers,
Thank you for choosing our products. For the best experience, please read the
instructions before operating the Printer. Our 3D team will always be ready to give
you the best service. Please contact us via the phone number or e- mail address
provided at the end when you encounter any problem with the Printer.
For a better experience in using our product, you may learn how to use the Printer in
the following ways:
View the accompanied instructions and videos in the TF card.
Visit our official website www.creality.com You will find relevant software/ hardware
information, contact details and operation and maintenance instructions on the
website.
Introduction................................1
General List................................2
Device Installion.........................3
Cable Connection......................5
Screen Information....................6
Loading Filament...…............…7
Platform Adjustment.................8
Software Installation.................9
For the First Printing................10
NOTES
1. Do not use the printer any way other than described herein in order to avoid
personal injury or property damage.
2. Do not place the printer near any heat source or flammable or explosive objects.
We suggest placing it in a well- ventilated, low- dust environment.
3. Do not expose the printer to violent vibration or any unstable environment, as
this may cause poor print quality.
4. Before using experimental or exotic filaments, we suggest using standard
filaments such as ABS or PLA to calibrate and test the machine.
5. Do not use any other power cable except the one supplied. Always use a
grounded three- prong power outlet.
6. Do not touch the nozzle or printing surface during operation as they may be hot.
Keep hands away from machine while in use to avoid burns or personal injury.
7. Do not wear gloves or loose clothing when operating the printer. Such cloths
may become tangled in the printers moving parts leading to burns, possible
bodily injury, or printer damage.
8. When cleaning debris from the printer hotend, always use the provided tools.
Do not touch the nozzle directly when heated. This can cause personal injury.
9. Clean the printer frequently. Always turn the power off when cleaning, and wipe
with a dry cloth to remove dust, adhered printing plastics or any other material
off the frame, guide rails, or wheels . Use glass cleaner or isopropyl alcohol to
clean the print surface before every print for consistent results.
10. Children under 10 years of age should not use the printer without supervision.
Filament Holder
Control Box
Nozzle Assembly C onnection
Platform C onnection
Power Cable C onnection
Extruder (E) Stepper
X Limit Switch
X Stepper
Z Limit Switch
Z Stepper
Y Limit Switch
Y Stepper
Nozzle Kit
TF Slot and USB Port
Display Screen
Control Knob
Voltage Selection
Platform
Base Frame
Z Gantry Frame
A、Introduction
1
Tool list
Tool Box Control Box
No. Image Name Qty No. Image Name Qty No. Image Name Qty
1 Spool & Nuts 1set 7 Power Cable 1 13 Spade 1
2 Spool Holder 1 8 USB Cable 1 14 Cable Ties 1set
3
TF C ard & Card
Reader 1set 9 PTFE Tubing
(spare part) 1 15 Hex keys, Wrench
& Screwdriver 1set
4 T- Bracket (Right) 1 10 Nozzle C leaner 1 16 Spare Parts 1set
5
T- Bracket
& Z Limit Switch
(Left)
1 11 Filament（200g） 1 17 Decorative Strip 1
6M5X25 Bolt & Lock
Washer 4 sets 12 Diagonal Pliers 1 18 Thumb Screw 3
Base Frame Gantry Frame
*CR- 10 mini without T- Bracket (Right) & Decoration Strip.
B、General List
2
Note: Make s ure that the nut for
prof ile ha s be en turne d by 9 0 °
before fastening the
T- shaped fixing block.
M5X25
4pcs *CR- 10 mini without T- Bracket (right).
Install the Gantry Frame
Install the T- shaped fixing block.
C、Device Installtion
3
Install decoration belt into the
notch, starting from one end. Cut off the excess material with
the diagonal pliers
Attach the Decorative Trim to all
parts needing to be decorated.
Attach the Bracket
with two thumb screws.
Attach Spool Holder
with included Nuts
Finished
◆ Install the Rack
◆ Install decoration strip
*CR- 10mini without Decoration Strip.
*The decoration S trip is available in various colors. The pictures above are for reference only.
4
Connect the aviation connectors to the
ports with corresponding pins
Y Stepper and Limit Switch
Extruder (E) Stepper
X Stepper and Limit Switch
Z Stepper and Limit Switch
Connect the Stepper Motors according to
the yellow labels on the 6pin (4- wire) side.
Connect the Limit Switches according to the
yellow labels on the 3pin (2- wire) side.
•Select the correct input voltage to match your local
mains (230V or 115V)
•Damage can occur if voltage is set incorrectly.
•Make sure the power cable is connected.
D、Introduction
5
Set Temperature of
the Nozzle
Current Temperature
of the Nozzle
Set Temperature of
the Hot Bed
Current Temperature
of the Hot Bed
Part C ooling Fan
Speed
Current Location of
the nozzle
Print Time
Print Progress
Prompt Message
Print Speed
Device Model
Push：OK/ Enter Sub Menu
Turn：Change Option/Value
E、Screen Information
6
Andere Handbücher für CR-10 Series
5
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere Creality 3D-Drucker Handbücher
Creality
Creality CR-10 SE Bedienungsanleitung
Creality
Creality Falcon2 Bedienungsanleitung
Creality
Creality Ender-3 Bedienungsanleitung
Creality
Creality CR-10 Series Bedienungsanleitung
Creality
Creality BMG CR-10 PrintHead Bedienungsanleitung
Creality
Creality CR20Pro Bedienungsanleitung
Creality
Creality 3dpRINTmILL Bedienungsanleitung
Creality
Creality CR-10 Series Bedienungsanleitung
Creality
Creality HALOT-LITE Bedienungsanleitung
Creality
Creality CR-10S Pro Bedienungsanleitung
Creality
Creality Laser Module Bedienungsanleitung
Creality
Creality Sprite Extruder Pro Kit Bedienungsanleitung
Creality
Creality K1 Bedienungsanleitung
Creality
Creality CR20Pro Handbuch
Creality
Creality CR-30 Bedienungsanleitung
Creality
Creality Ender-3 Handbuch
Creality
Creality Dual Z Bedienungsanleitung
Creality
Creality CR-6 Max Bedienungsanleitung
Creality
Creality CR-6 Max Bedienungsanleitung
Creality
Creality 3D Pad Bedienungsanleitung
