Creator LAN G15 Bedienungsanleitung
User
User’
’s
sManual
Manual
LAN
LAN G15
G15 Programmable
Programmable Touch
Touch Screen
Screen
V1.1
CREATOR Corporation (CHINA)
Meaning of the icons
■Safety Instruction
Symbols are used in the Manual and devices, referring to the possible risk to users or others ，as well as the
damage to property, for helping you to safely and properly use the devices. The instruction and the implications
are as follows. Please make sure your correct understanding of these instructions before using the Manual.
To remind user to conduct according to the attached
operation and maintenance instructions. If ignore
these information, death or injury could possibly
happen.
To remind the user that the risky uninsulated voltage
in the device could caused electric shock to human.
CE authentication indicates the product is in line
with the EU safety regulation, and for assurance of
safety use.
SGS Authentication indicates the product has
reached the QC standard of the global-biggest Swiss
universe surveyor.
This product has acquired the ISO9001 International
Quality Authentication (Authentication authority:
Germany Rheinland TUV)
Caution: To avoid electric shock, please don't open
the case, nor put the useless parts in it. Please
contact with qualified service staff.
■General information instruction List the situation could cause unsuccessful operation
or setup, and relevant information needed to notice.
Important Notices
Caution
To ensure the device in reliable use and personal
safety, please abide by the following items when in
installation, use and maintenance:
Notice in installation
◆Please DO NOT use the product in following
places: the places with dust, oily smoke, electrical
conductive dust, corrosive gas, inflammable gas; the
places with high temperature, due, rain and wind
exposures; the places endangered by shock and
vibration. Electric shock, fire and incorrect operation
could also cause damage and deterioration to the
product.
◆When conducting screw drilling and wiring
process, DO NOT let metal irons and wire lead drop
into the controller and air vent, which could possibly
cause fire, failure and accidental operation.
◆After finishing the installation, it is necessary to
ensure there is no foreign matter including the
packing material like contact paper on the ventilation
surface, otherwise, it could cause poor heat
dissipation while running, as well as fire, failure and
accidental operation.
◆Avoid conducting wiring and plugging in/out
cable socket with electricity, otherwise, electric shock,
circuit damage could easily happen.
◆Installation and wiring should be firm and reliable.
Poor contact could cause malfunction.
◆With regard to the application situations with
strong interference, shielded cable should be used for
the input and output of HF signal, to improve the
anti-interference performance of the system.
Note in Wiring
◆Installation and wiring shouldn't be conducted
until external electric power is cut off, otherwise,
electric shock or device damage could happen.
◆The product is grounded by the earth lead of the
power cable. To avoid electric shock, the earth lead is
necessary to be connected with the ground. Before
making connection with the output end or input end
of the product, please ensure it is correctly grounding.
◆Upon finish wiring, remove the sundries. Please
cover up the terminal plate for avoiding electric
shock.
Note for Operation and Maintenance
◆Please DO NOT touch the terminal when with
electricity, otherwise, electric shock could happen.
◆Don't clean up and screw the terminal tight
before power is off. Such operation could cause
electric shock when with electricity.
◆Please turn off the power before connecting or
disconnecting the communication signal cable,
peripheral modules or control units, otherwise, device
could be damaged and accidental operation could
happen.
◆Please DO NOT disassemble the device, so as to
avoid internal electric components damage.
◆It is necessary to read through the Manual and
fully ensure the safety, before altering the program,
trial running, starting and stopping operation.
◆Button battery shouldn't be replaced before the
power is off. If it has to be replaced when the
device is running, it should be conducted by
professional electric technician wearing insulated
gloves.
Note for declaration of worthless.
When declaring of worthless, please note
◆Explosion of electrolytic capacitor on the circuit
board could happen when burning it.
◆Please classify and dispose it. Don't dispose it
into household garbage.
◆Please deal it as industrial waste, or in
accordance with local environmental protection
regulation.
Forward
User’s Manual of LAN G15 Programmable Touch Screen primarily introduces the operation of CR-LAN
G15, key functions and parameters, as well as common troubles shooting.
The Manual serves as user's operation instruction, rather than for maintenance service purpose. Since the date of
release, any function or relevant parameter alteration will be in supplement instruction. Please refer to the
manufacturer or dealers for inquiry.
CREATOR Electronics own the copyright of the Manual. Without permission, any unit or person shall not take
part or total of the Manual for business purpose.
The copyright of the Manual is protected by Copyright Law of People’s Republic of China and other Intellectual
Property Law. Without written permission, any copy or distribution is prohibited.
Index
Chapter 1 Overview......................................................................................................................................................1
1.1 System Introduction....................................................................................................................................... 1
1.2 Functions and Features...................................................................................................................................1
1.3 Regular Operations.........................................................................................................................................1
1.4 LAN G15 Dimension..................................................................................................................................... 2
1.5 Installation of Touch Screen Driver............................................................................................................... 2
1.5.1 Touch Screen Driver under Windows XP........................................................................................ 2
1.5.2 Touch Screen Driver under Other Windows Systems......................................................................4
Chapter 2 Touch Screen................................................................................................................................................5
2.1 Panel Instruction..............................................................................................................................................5
2.2 System Configuration......................................................................................................................................5
2.2.1 Login Page........................................................................................................................................5
2.2.2 Main Page.........................................................................................................................................6
2.2.3 Date & Time..................................................................................................................................... 6
2.2.4 LAN..................................................................................................................................................7
2.2.5 Volume..............................................................................................................................................7
2.2.6 Language........................................................................................................................................ 7
2.2.7 Power Manage..................................................................................................................................7
2.2.8 Misc Settings.................................................................................................................................... 8
2.2.9 About US.......................................................................................................................................... 8
2.2.10 Exit................................................................................................................................................. 8
2.3 Use of TouchPanel G Series Software............................................................................................................ 8
2.3.1 Download（Update）Firmware......................................................................................................8
2.3.2 Update Data......................................................................................................................................9
2.4 System Connection Diagram.........................................................................................................................11
Chapter 3 Technical Parameters.................................................................................................................................12
Chapter 4 Common Troubles Shooting......................................................................................................................13
Chapter 5 Maintenance ............................................................................................................................................ 14
CREATOR CHINA 2011-09 WWW.CREATOR1997.COM
1
User’s Manual of LAN G15 Programmable Touch Screen
Chapter 1 Overview
1.1 System Introduction
CR-LAN G15 Programmable Touch Screen is
with full-color super large display, communicated
with PC via Ethernet port, with brightness sensor
and infrared sensor, in 800X600 pixels, fast
download of project, supporting 3D button effect.
CR-LAN G15 is compatible with the latest
generation of PGMIII programmable host, with
the following major advantages:
◆Adopt high-End Touch Lens Technology
High-end Smooth Touch Lens technology
perfectly integrate Lens with Touch Panel, making
the surface of touch screen and case entirely
smooth, with excellent hand-feel and outlook, as
well as the features of long life, high recognition,
advanced and beautiful structure. Also, the high
degree of light transmittance determines good
visual effect on the screen.
◆Exquisite Outlook
Fashion and compact design, perfect combination
of highlight and matte texture material, sbq quality
alloy aluminum fiber-drawing, with distinct
gradation.
◆Intelligent Core
Dual-core CPU with GHz at 667mhz
◆Adopt Wince System
Dual-control function, move your slim finger on
screen at will, making everything so simple.
◆USB 2.0 Download Mode
Adopt high-speed USB 2.0 for download, at
several dozen times of speed of USB 1.1,
convenient for the download of programmed
multiple language control picture and information
picture.
CR-LAN G15 Wired Programmable Touch Screen
is suitable for using in the command control
centers at all scales, multi-media conference hall,
multi-media classroom, luxury resort and hotel etc.
One screen could help you to control everything
easily.
1.2 Functions and Features
◆65K true color TFT LCD monitor, with
resolutions of 800X600；
◆Touch screen with size of 15.0 inches;
◆Via RJ45 port, directly connect with CR-PGMIII
control host to make a perfect control system;
◆Wired control mode for direct communication
with PC via Ethernet, with faster speed for project
download.
◆With jumping page and sub-page display
function and Chinese-English Display；
◆Programmable operation interface, graphic
interface supports picture, graphic, text, vivid 3D
animation and 3D button display effect;
◆With touch screen coordinate correcting
function；
◆1G memory；
◆Adopt high-end Touch Lens technology, with
CREATOR CHINA 2011-09 WWW.CREATOR1997.COM
2
User’s Manual of LAN G15 Programmable Touch Screen
fashionable and beautiful outlook design.
1.3 Regular Operation
◆Turn on
Directly touch the screen area to turn it on.
◆Turn off
Configure the property setup of touch screen to
delay power off.
1.4 LAN G15 Dimension
Front view：
Side view：
Rear view：
Dimension of CR-LAN G15 Wired Programmable
Touch Screen：
354（L）X334（W）X55（H）mm
CREATOR CHINA 2011-09 WWW.CREATOR1997.COM
3
User’s Manual of LAN G15 Programmable Touch Screen
1.5 Installation of Touch Screen
Driver
1.5.1 Touch Screen Driver under
Windows XP
1.Prepare the following objects: touch screen
(complete touch screen, properly install the
battery (not necessary)), 12V power, USB data
cable, touch screen driver (driver is in CR-LAN
G15 Driver folder), as picture 1-1:
Picture 1-1
2. To place the folder into the PC installed with
ThinkDraw software, e.g. C ：\CR-LAN G15
Driver
3. Start touch screen, connect USB cable with
PC, dialogue box of “new hardware
detected “is prompted, as well as “Find
new hardware wizard”, as picture 1-2:
图1-2
4.Select “install from list or appointed position
(premier)(s)”, click on “Next step”to see
“hardware update wizard”dialogue box, as
picture 1-3:
Picture 1-3
Remove the tick before “Search portable media
(soft disc, CD-ROOM), and then tick “include this
position in searching (0)”, click on “Navigate”to
select a saving path of the driver, click on
“Confirm”, as picture 1-4 and picture 1-5:
CREATOR CHINA 2011-09 WWW.CREATOR1997.COM
4
User’s Manual of LAN G15 Programmable Touch Screen
Picture 1-4
Picture 1-5
5. Click on “Next step”to start installation of the
driver, as picture 1-6:
Picture 1-6
6.click on “finish”to finish the installation of touch
screen driver, then Creator_g7 will be displayed in
device manager, as seen in picture 1-7
Picture 1-7
7. Open PC editing software Think Draw,
customize your unique user interface and update
it to touch screen for experience.
1.5.2 Touch Screen Driver under Other
Windows Systems
Installation of touch screen driver in other
Windows system is basically the same as that of
Windows XP. We won’t repeat the description.
CREATOR CHINA 2011-09 WWW.CREATOR1997.COM
5
User’s Manual of LAN G15 Programmable Touch Screen
Chapter 2 Touch Screen
2.1 Panel Instruction
Rear Panel：
①RJ45：Network port，for connecting to PC or
central host.
DOWNLOAD ：Download key, for system
upgrade
USB：USB port
DC 12V：Power input port, support DC 12V
input of power supply to touch
screen.
② System reset key.
2.2 System Configuration
Press and hold the control interface of main program
until the following picture is displayed:
Picture 2-1
1. Select Calibration key to have system
calibration, as seen in the picture. And calibrate it
as per the instructions.
Picture 2-2
2. Select settings to access to background
program, for detailed operation, please refer to
2.2.1
2.2.1 Login Page
1. Access to setting programs, you will see an
interface as picture 2-3 when Pass code is
needed:
Picture 2-3
2. Click on pass code input box to see a pop-up
keyboard, as picture 2-4:
Inhaltsverzeichnis
Beliebte Touchscreen Handbücher anderer Marken
IBASE Technology
IBASE Technology ASTUT-152-RE1S Bedienungsanleitung
YASKAWA
YASKAWA TP 610C Bedienungsanleitung
B&R
B&R Power Panel C Series Bedienungsanleitung
Beijer Electronics
Beijer Electronics X2 control Bedienungsanleitung
AXIOMTEK
AXIOMTEK GOT321W-521 Bedienungsanleitung
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Bedienungsanleitung
