Crestron C2N-DB12 Anleitung zur Verwendung

Crestron C2N-DB6/8/12

Decorator Wall Panels

Operations & Installation Guide

This document was prepared and written by the Technical Documentation department at:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647

1-888-CRESTRON

All brand names, product names and trademarks are the property of their respective owners.

Crestron C2N-DB6/8/12 Decorator Wall Panels

Operations & Installation Guide - DOC. 6154 Contents •i

Contents

Decorator Wall Panels: C2N-DB6/8/12 .............................. 1

Introduction......................................................................................1

Features and Functions ..........................................................1

Specifications.........................................................................3

Physical Description ..............................................................4

Button Replacement ..............................................................6

Industry Compliance..............................................................6

Setup.................................................................................................7

Network Wiring.....................................................................7

Identity Code .........................................................................8

Installation ...........................................................................12

Programming Software ..................................................................13

Programming with Crestron AppBuilder or D3 Pro ...............14

Programming with SIMPL Windows..................................15

Uploading and Upgrading..............................................................20

Communication Settings......................................................20

Uploading a SIMPL Windows Program..............................24

Firmware Upgrade...............................................................25

Serial Number Assignment..................................................27

Problem Solving.............................................................................29

Troubleshooting...................................................................29

Further Inquiries ..................................................................30

Future Updates.....................................................................30

Return and Warranty Policies ........................................................31

Merchandise Returns / Repair Service ................................31

CRESTRON Limited Warranty ..........................................31

Crestron C2N-DB6/8/12 Decorator Wall Panels

Operations & Installation Guide - DOC. 6154 Decorator Wall Panels: C2N-DB6/8/12 •1

Decorator Wall Panels:

C2N-DB6/8/12

Introduction

Features and Functions

The C2N-DB6/8/12-series Decorator Wall Panels are wall-mounted,

single-gang user interfaces that can be part of a Crestron®solution total

control system. The panels are standard Cresnet®devices, and provide

fingertip control when the control system is properly programmed using

Crestron’s SIMPL Windows, Application Builder, or D3 Pro software.

The number in the product’s name corresponds to the number of buttons

on the panel. Each of these panels is available in three colors: almond,

black, and white. A letter at the end of the product name, ‘A’, ‘B’, or

‘W’, denotes the color; e.g., C2N-DB12B is a black, 12-button unit. For

simplicity within this guide, the letter designating color is omitted. Also,

although the C2N-DB12 is featured in descriptions and illustrations

throughout this guide, the information herein applies to the other panels

as well. Exceptions are noted.

NOTE: Wall panels can also be mounted in multi-gang electrical boxes.

Functional Summary

• Ergonomic buttons are easy to read from any angle

• LED indicators provide visual feedback of commands

• Panels are available in 6-, 8-, or 12-button configurations

• Panels accommodate standard faceplates

• Panels can be mounted singly, or in multi-gang configurations.

Decorator Wall Panels Crestron C2N-DB6/8/12

2 •Decorator Wall Panels: C2N-DB6/8/12 Operations & Installation Guide - DOC. 6154

Faceplates are not supplied; the wall panels accept faceplates that can be

obtained in any store selling lighting supplies and accessories, making it

easy for the wall panels to match the appearance of the site’s other switch

and outlet styles.

NOTE: The C2N-DB12 wall panel is supplied with 12 blank

pushbuttons. As an option, custom-engraved keys can be designed and

obtained by using the Crestron Engraver software. Version 2.1.0.1 or

later is available from the Downloads | Software Updates section of the

Crestron website (www.crestron.com).

All buttons on the wall panel are functionally identical and have light

emitting diodes (LEDs) that serve as user feedback indicators. Each

LED’s illumination (on/off) is independently addressable, and is

programmable using SIMPL Windows.

In the program, the intensity level for all the button LEDs can be set from

0 to 100%. Refer to “C2N-DB12 Symbol in Programming Manager” on

page 17 for details.

NOTE: These units do not support audio WAV files.

Crestron C2N-DB6/8/12 Decorator Wall Panels

Operations & Installation Guide - DOC. 6154 Decorator Wall Panels: C2N-DB6/8/12 •3

Specifications

The following table provides specifications for the wall panels.

Specifications for the Wall Panels

SPECIFICATION DETAILS

Power Re

uirements 3 Watts

(

0.125 Amp

24 VDC

)

Default Network ID 73, 72, or 71

(

for C2N-DB6/8/12

)

LED T

e Red, dimmable via pro

ram

Control System Update Files1, 2, 3

2-Series Control System Update Version C2-2.004.CUZ or later

CEN/CN-TVAV Update File Version 5.10.13V.UPZ or later

CNMSX-AV/Pro Update File Version 5.10.11X.UPZ or later

CNRACKX/-DP Update File Version 5.10.11W.UPZ or later

ST-CP Update File Version 4.02.04S.UPZ or later

Environmental Temperature 32°F - 113°F (0°C - 45°C)

Humidity 10% to 90% RH (non-condensing)

Dimensions and Weight Height: 4.16 in (10.57 cm)

Width: 1.79 in (4.55 cm)

Depth: 1.53 in (3.89 cm)4

Weight: 2.60 oz (75 g)

1. The latest software versions can be obtained from the Downloads | Software

Updates section of the Crestron website (www.crestron.com). Refer to the NOTE

following these footnotes.

2. Crestron 2-Series control systems include the AV2, CP2/CP2E, MP2/MP2E,

PAC2, PRO2 and RACK2.

3. Filenames for CNX and ST-CP update files have a UPZ extension. Files on the

website may be .zip or self-extracting .exe files containing the .cuz or .upz file. To

avoid program problems, make sure you are using the update file with the correct

suffix letter (e.g., S, V, W, X).

4. The depth of the wall panel is listed without the Cresnet connector (which would

add approximately 0.45 in. plus clearance for the wiring).

NOTE: Crestron software and any files on the website are for Authorized

Crestron dealers and Crestron Authorized Independent Programmers

(CAIP) only. New users may be required to register to obtain access to

certain areas of the site (including the FTP site).

Decorator Wall Panels Crestron C2N-DB6/8/12

4 •Decorator Wall Panels: C2N-DB6/8/12 Operations & Installation Guide - DOC. 6154

Physical Description

Refer to the figures below and on page 5. The number of buttons on a

wall panel can be 6, 8, or 12. They are arranged numerically from left to

right, top to bottom and each has an LED window. (Refer to page 19 for

join number information.)

Each wall panel has a button unit with a membrane switch, and a male

Cresnet network port labeled 24 Y Z G. The port provides for operating

power and for communications to/from the wall panel.

The button unit is supplied with the removable buttons secured in place

by a divider and four screws. Use the two 1-inch pan head screws

provided to mount the button unit in the electrical box.

Wall Panel Physical Views

6-button Model 8-button Model 12-button Model

Refer to the illustration on page 19 for button arrangement details.

Crestron C2N-DB6/8/12 Decorator Wall Panels

Operations & Installation Guide - DOC. 6154 Decorator Wall Panels: C2N-DB6/8/12 •5

Button Unit Detail View

1.53 in

(3.89 cm)

1.07 in

(2.72 cm)

1.79 in

(4.55 cm)

4.16 in

(10.57 cm)

1.67 in

(4.24 cm)

2.70 in

(6.86 cm)

Rubber

with buttons removed

Front View

Cresnet

port

Back View

with buttons installed

Side View

Membrane

Installation View

6-32 x 1 in. pan head

2-28 x 3/16 in. pan head

Divider

Single gang electrical box shown;

(2.5 in. depth recommended)

Removable buttons

Button unit

LED window

(See CAUTION on

page 6.)

Can also mount in multi-gang boxes

Decorator Wall Panels Crestron C2N-DB6/8/12

6 •Decorator Wall Panels: C2N-DB6/8/12 Operations & Installation Guide - DOC. 6154

Button Replacement

Replacing/changing the removable buttons in a Wall Panel is a simple

process. Refer to the illustrations on the previous page and the following

procedures.

1. If the wall panel is installed in an electrical box, remove the two

1-inch securing screws, carefully pull the wall panel from the

electrical box, and disconnect the Cresnet cable.

2. Remove the four screws that attach the divider, and remove the

divider.

CAUTION: The removable buttons fit snugly on the rubber membrane

and must be removed carefully to avoid pulling the membrane from the

unit. Once membrane is detached, you may be unable to reattach it.

3. While holding adjacent buttons in place, carefully pull the

button(s) to be replaced from the rubber membrane.

4. Carefully press the replacement button(s) in place, make sure

LED window(s) orientation is correct, and attach the divider

using the four screws removed in step 2.

5. If applicable, reinstall the wall panel in the electrical box.

Industry Compliance

As of the date of manufacture, the wall panels have been tested and found

to comply with specifications for CE marking and standards per EMC

and Radiocommunications Compliance Labelling (N11785).

NOTE: This device complies with part 15 of the FCC rules. Operation is

subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Crestron Tastenfeld Handbücher

Crestron

Crestron Zum ZUMMESH-KPBATT Bedienungsanleitung

Crestron

Crestron CLWI-KPLEX Bedienungsanleitung

Crestron

Crestron Zum Series Bedienungsanleitung

Crestron

Crestron Cameo C2N-CBD-P Original Betriebsanleitung

Crestron

Crestron Cameo C2NI-CB Series Bedienungsanleitung

Crestron

Crestron C2N-DBF12 Anleitung zur Verwendung

Crestron

Crestron Horizon HZ-KPCN Series Bedienungsanleitung

Crestron

Crestron Cameo C2N-CBD Anleitung zur Verwendung

Crestron

Crestron Cameo C2NI-CB Series Anleitung zur Verwendung

Crestron

Crestron Horizon infiNET EX HZ-KPEX Bedienungsanleitung

Crestron

Crestron C2N-LCDB3 Maßzeichnung

Crestron

Crestron CNX-B12 Anleitung zur Verwendung

Crestron

Crestron black nova AXES Series Bedienungsanleitung

Crestron

Crestron CLWI-KPLCN Bedienungsanleitung

Crestron

Crestron Cameo INET-CBDEX Series Anleitung zur Verwendung

Crestron

Crestron INET-CBDEX-E Original Betriebsanleitung

Crestron

Crestron HZ-BTN Bedienungsanleitung

Crestron

Crestron Cameo C2N-CBD-P Kurzanleitung

Crestron

Crestron Lutron CNWM-LU12 Anleitung zur Verwendung

Crestron

Crestron AirMedia ZUMMESH-KP10AMBATT Bedienungsanleitung

Crestron

Crestron ZUM ZUMMESH-KP Bedienungsanleitung

Crestron

Crestron ZUMLINK-KP Bedienungsanleitung

Crestron

Crestron CN-WP12FW Bedienungsanleitung

Crestron

Crestron GLPPA-KP Bedienungsanleitung

Beliebte Tastenfeld Handbücher anderer Marken

BFT

BFT SELETTO Bedienungsanleitung

Micro Id

Micro Id MP7G3BL Gebrauchsanweisung

WindowMaster

WindowMaster WLI 130 Bedienungsanleitung

ACT

ACT ACT PRO 1030 Bedienungsanleitung

Cardin

Cardin SSB Series Bedienungsanleitung

Harman Kardon

Harman Kardon KP 1 Bedienungsanleitung

Chamberlain

Chamberlain KPR2000 Benutzerhandbuch

CYP

CYP CR-KP1 Bedienungsanleitung

Aeware

Aeware k-35 Series Referenzhandbuch

Aritech

Aritech CS-175 Series Bedienungsanleitung

GE NetworX NX-1600E Series Bedienungsanleitung

Lenze AC Tech

Lenze AC Tech MC SERIES Bedienungsanleitung

Burg Wächter

Burg Wächter secuENTRY 7711 Bedienungsanleitung

Aeware

Aeware in.k450 Bedienungsanleitung

Lenze

Lenze EPM-H410 Bedienungsanleitung

Toshiba

Toshiba RKP007Z Bedienungsanleitung

Gemini

Gemini GEM-DXK1 KEYPAD Bedienungsanleitung

Russound

Russound MDK-C5 Betriebsanleitung